board: add Orangepi Zero Plus support
PATCH v2 1/1 board: add Orangepi Zero Plus support
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot
This patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2).
---
changes v1 -> v2:
* rebase on Buildroot master
* bump U-Boot from 2020.04 to 2020.10
* bump Linux from 5.6.6 to 5.7.19
DEVELOPERS | 2 + board/orangepi/orangepi-zero-plus/boot.cmd | 6 +++ .../orangepi/orangepi-zero-plus/genimage.cfg | 39 ++++++++++++++ board/orangepi/orangepi-zero-plus/readme.txt | 34 +++++++++++++ configs/orangepi_zero_plus_defconfig | 51 +++++++++++++++++++ 5 files changed, 132 insertions(+) create mode 100644 board/orangepi/orangepi-zero-plus/boot.cmd create mode 100644 board/orangepi/orangepi-zero-plus/genimage.cfg create mode 100644 board/orangepi/orangepi-zero-plus/readme.txt create mode 100644 configs/orangepi_zero_plus_defconfig
DEVELOPERS +2 -0
@@ -1580,7 +1580,9 @@ F: package/ecryptfs-utils/ N: Marcin Niestroj <[email protected]> F: board/grinn/ +F: board/orangepi/orangepi-zero-plus/ F: configs/grinn_* +F: configs/orangepi_zero_plus_defconfig F: package/argparse/ F: package/dt-utils/ F: package/easydbus/
board/orangepi/orangepi-zero-plus/boot.cmd new file +6 -0
@@ -0,0 +1,6 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r Image +fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-zero-plus.dtb + +booti $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-zero-plus/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-h5-orangepi-zero-plus.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + size = 1M # 1MB - 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/orangepi/orangepi-zero-plus/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Orangepi Zero Plus. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Orangepi Zero Plus link: +http://www.orangepi.org/OrangePiZeroPlus/ + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make orangepi_zero_plus_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Orangepi Zero Plus and power it up. The console +is on the serial line, 115200 8N1.
configs/orangepi_zero_plus_defconfig new file +51 -0
51 lines not on this page · raw message
Signature · 1 line
2.29.1
PATCH v2 1/1 board: add Orangepi Zero Plus support
Quoted 12 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Marcin" == Marcin Niestroj <[email protected]> writes:
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildrootThis patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2).
Quoted 6 lines
Signed-off-by Marcin Niestroj <[email protected]>---
changes v1 -> v2:
* rebase on Buildroot master
* bump U-Boot from 2020.04 to 2020.10
* bump Linux from 5.6.6 to 5.7.19
Committed, thanks.
I wonder if we could combine some of all these orangepi defconfigs and create a single build that works on multiple boards rather than maintaining all these almost similar files?
Signature · 1 line
Bye, Peter Korsgaard
PATCH v2 1/1 board: add Orangepi Zero Plus support
Quoted 19 lines · Peter Korsgaard
Quoted 12 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Marcin" == Marcin Niestroj <[email protected]> writes:
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildrootThis patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2).
Quoted 6 lines
Signed-off-by Marcin Niestroj <[email protected]>---
changes v1 -> v2:
* rebase on Buildroot master
* bump U-Boot from 2020.04 to 2020.10
* bump Linux from 5.6.6 to 5.7.19
Quoted 5 lines
Committed, thanks.
I wonder if we could combine some of all these orangepi defconfigs and create a single build that works on multiple boards rather than maintaining all these almost similar files?
Both orangepi_zero_plus and orangepi_zero_plus2 use the same processor. It seems like a good idea to unify them. Maybe next time someone will want to bump orangepi_zero_plus2 it will be a good occasion to test both boards with same Linux + U-Boot versions.
Signature · 1 line
Marcin Niestr?j