ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
PATCH 1/1 ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
The mbus binding had been extended more than two years ago, but the device tree files for Armada 38x didn't change.
Adding this third entry will allow the mbus going to suspend which was the last thing preventing the SoC going to standby mode
Signed-off-by Gregory CLEMENT <[email protected]>
--- arch/arm/boot/dts/armada-38x.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/armada-38x.dtsi +2 -1
@@ -360,7 +360,8 @@ mbusc: mbus-controller at 20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; }; mpic: interrupt-controller at 20a00 {
Signature · 1 line
2.11.0
PATCH 1/1 ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
Hi,
Quoted 7 lines · Gregory CLEMENT
The mbus binding had been extended more than two years ago, but the device tree files for Armada 38x didn't change.
Adding this third entry will allow the mbus going to suspend which was the last thing preventing the SoC going to standby mode
Signed-off-by Gregory CLEMENT <[email protected]>
Now applied on mvebu/dt
Gregory
Quoted 21 lines
--- arch/arm/boot/dts/armada-38x.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm/boot/dts/armada-38x.dtsi +2
-1@@ -360,7 +360,8 @@ mbusc: mbus-controller at 20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; }; mpic: interrupt-controller at 20a00 {Signature · 1 line
2.11.0
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com