perf, c2c: Add new tool to analyze cacheline contention on NUMA systems
v3 cover perf, c2c: Add new tool to analyze cacheline contention on NUMA systems
With the introduction of NUMA systems, came the possibility of remote memory accesses. Combine those remote memory accesses with contention on the remote node (ie a modified cacheline) and you have a possibility for very long latencies. These latencies can bottleneck a program.
The program added by these patches, helps detect the situation where two nodes are 'tugging' on the same _data_ cacheline. The term used through out this program and the various changelogs is called a HITM. This means nodeX went to read a cacheline and it was discovered to be loaded in nodeY's LLC cache (hence the cacheHIT). The remote cacheline was also in a 'M'odified state thus creating a 'HIT M' for hit in a modified state. HITMs can happen locally and remotely. This program's interest is mainly in remote HITMs as they cause the longest latencies.
Why a program has a remote HITM derives from how the two nodes are 'sharing' the cacheline. Is the sharing intentional ("true") or unintentional ("false"). We have seen lots of "false" sharing cases, which lead to simple solutions such as seperating the data onto different cachelines.
This tool does not distinguish between 'true' or 'false' sharing, instead it just points to the more expensive sharing situations under the current workload. It is up to the user to understand what the workload is doing to determine whether a problem exists or not and how to report it.
The data output is verbose and there are lots of data tables that interprit the latencies and data addresses in different ways to help see where bottlenecks might be lying.
Most of this idea, work and calculations were done by Dick Fowles. My work mainly includes porting it to perf. Joe Mario has contributed greatly with ideas to make the output more informative based on his usage of the tool. Joe has found a handful of bottlenecks using various industry benchmarks and has worked with developers to fix them.
I would also like to thank Stephane Eranian for his early help and guidance on navigating the differences between the current perf tool and how similar tools looked at HP. And also his tireless work in getting the MMAP2 interface to stick.
Also thanks to Arnaldo and Jiri Olso for their help in suggestions for this tool.
I also have a test program that generated a controlled number of HITMs that we used frequently to validate our early work (the Intel docs were not always clear which bits had to be set and some arches do not work well). I would like to add it, but didn't know how (nor did I spend any serious time looking either).
This program has been tested primarily on Intel's Ivy Bridge platforms. The Sandy Bridge platforms had some quirks that were fixed on Ivy Bridge. We haven't tried Haswell as that has a re-worked latency event implementation.
A handful of patches include re-enabling MMAP2 support and some fixes to perf itself. One in particular hacks up how standard deviation is calculated. It works with our calculations but may break other tools expectations. Feedback is welcomed.
Comemnts, feedback, anything else welcomed.
V3: updated to latest perf/core branch 5aed711
support for older machines like Westmere (Peter Z) cleanups and fixes
broke out physid support into another patchset still need to address output deficiencies (Andi Kleen)
V2: updated to latest perf/core branch 1029f9fedf87fa6
switched to hist_entry based on Jiri O's suggestion dropped latency analyze for now until this patchset is accepted little fixes and tweaks
Arnaldo Carvalho de Melo (2):
perf c2c: Shared data analyser
perf c2c: Dump raw records, decode data_src bits
Don Zickus (19):
Revert "perf: Disable PERF_RECORD_MMAP2 support"
perf, machine: Use map as success in ip__resolve_ams
perf, session: Change header.misc dump from decimal to hex perf, stat: FIXME Stddev calculation is incorrect
perf, callchain: Add generic callchain print handler for stdio perf, c2c: Rework setup code to prepare for features
perf, c2c: Add rbtree sorted on mmap2 data
perf, c2c: Add stats to track data source bits and cpu to node maps perf, c2c: Sort based on hottest cache line
perf, c2c: Display cacheline HITM analysis to stdout
perf, c2c: Add callchain support
perf, c2c: Output summary stats
perf, c2c: Dump rbtree for debugging
perf, c2c: Fixup tid because of perf map is broken
perf, c2c: Add symbol count table
perf, c2c: Add shared cachline summary table
perf, c2c: Add framework to analyze latency and display summary stats perf, c2c: Add selected extreme latencies to output cacheline stats
table
perf, c2c: Add summary latency table for various parts of caches
kernel/events/core.c | 4 - tools/perf/Documentation/perf-c2c.c | 22 + tools/perf/Makefile.perf | 1 + tools/perf/builtin-c2c.c | 2963 +++++++++++++++++++++++++++++++++++ tools/perf/builtin.h | 1 + tools/perf/perf.c | 1 + tools/perf/ui/stdio/hist.c | 37 + tools/perf/util/event.c | 36 +- tools/perf/util/evlist.c | 37 + tools/perf/util/evlist.h | 7 + tools/perf/util/evsel.c | 1 + tools/perf/util/hist.h | 4 + tools/perf/util/machine.c | 2 +- tools/perf/util/session.c | 2 +- tools/perf/util/stat.c | 3 +- 15 files changed, 3097 insertions(+), 24 deletions(-) create mode 100644 tools/perf/Documentation/perf-c2c.c create mode 100644 tools/perf/builtin-c2c.c
Signature · 87 lines
1.7.11.7 Arnaldo Carvalho de Melo (2): perf c2c: Shared data analyser perf c2c: Dump raw records, decode data_src bits Don Zickus (17): Revert "perf: Disable PERF_RECORD_MMAP2 support" perf, sort: Add physid sorting based on mmap2 data perf, sort: Allow unique sorting instead of combining hist_entries perf: Allow ability to map cpus to nodes easily perf, kmem: Utilize the new generic cpunode_map perf: Fix stddev calculation perf, callchain: Add generic callchain print handler for stdio perf, c2c: Rework setup code to prepare for features perf, c2c: Add in sort on physid perf, c2c: Add stats to track data source bits and cpu to node maps perf, c2c: Sort based on hottest cache line perf, c2c: Display cacheline HITM analysis to stdout perf, c2c: Add callchain support perf, c2c: Output summary stats perf, c2c: Dump rbtree for debugging perf, c2c: Add symbol count table perf, c2c: Add shared cachline summary table kernel/events/core.c | 4 - tools/perf/Documentation/perf-c2c.c | 22 + tools/perf/Makefile.perf | 1 + tools/perf/builtin-c2c.c | 1787 +++++++++++++++++++++++++++++++++++ tools/perf/builtin-kmem.c | 78 +- tools/perf/builtin-report.c | 2 +- tools/perf/builtin.h | 1 + tools/perf/perf.c | 1 + tools/perf/ui/stdio/hist.c | 37 + tools/perf/util/cpumap.c | 150 +++ tools/perf/util/cpumap.h | 35 + tools/perf/util/event.c | 36 +- tools/perf/util/evsel.c | 1 + tools/perf/util/hist.c | 10 +- tools/perf/util/hist.h | 5 + tools/perf/util/sort.c | 149 +++ tools/perf/util/sort.h | 4 + tools/perf/util/stat.c | 13 + tools/perf/util/stat.h | 1 + 19 files changed, 2236 insertions(+), 101 deletions(-) create mode 100644 tools/perf/Documentation/perf-c2c.c create mode 100644 tools/perf/builtin-c2c.c -- 1.7.11.7 *** BLURB HERE *** Arnaldo Carvalho de Melo (2): perf c2c: Shared data analyser perf c2c: Dump raw records, decode data_src bits Don Zickus (13): perf: Fix stddev calculation perf, callchain: Add generic callchain print handler for stdio perf, c2c: Rework setup code to prepare for features perf, c2c: Add in new options to configure latency and stores perf, c2c: Add in sort on physid perf, c2c: Add stats to track data source bits and cpu to node maps perf, c2c: Sort based on hottest cache line perf, c2c: Display cacheline HITM analysis to stdout perf, c2c: Add callchain support perf, c2c: Output summary stats perf, c2c: Dump rbtree for debugging perf, c2c: Add symbol count table perf, c2c: Add shared cachline summary table tools/perf/Documentation/perf-c2c.c | 22 + tools/perf/Makefile.perf | 1 + tools/perf/builtin-c2c.c | 1760 +++++++++++++++++++++++++++++++++++ tools/perf/builtin.h | 1 + tools/perf/perf.c | 1 + tools/perf/ui/stdio/hist.c | 37 + tools/perf/util/hist.h | 4 + tools/perf/util/stat.c | 13 + tools/perf/util/stat.h | 1 + 9 files changed, 1840 insertions(+) create mode 100644 tools/perf/Documentation/perf-c2c.c create mode 100644 tools/perf/builtin-c2c.c -- 1.7.11.7
PATCH v3 1/15 perf: Fix stddev calculation
The stddev calculation written matched standard error. As a result when using this result to find the relative stddev between runs, it was not accurate.
Update the formula to match traditional stddev. Then rename the old stddev calculation to stderr_stats in case someone wants to use it.
--- tools/perf/util/stat.c | 13 +++++++++++++ tools/perf/util/stat.h | 1 + 2 files changed, 14 insertions(+)
tools/perf/util/stat.c +13 -0
@@ -33,6 +33,7 @@ double avg_stats(struct stats *stats)* http://en.wikipedia.org/wiki/Stddev * * The std dev of the mean is related to the std dev by: +* (also known as standard error) * * s * s_mean = -------
@@ -41,6 +42,18 @@ double avg_stats(struct stats *stats)*/ double stddev_stats (struct stats *stats) { +double variance; + +if (stats->n <2 ) +return 0.0 ; + + variance = stats->M2 / (stats->n -1 ); + +return sqrt (variance); +} + +double stderr_stats (struct stats *stats) +{double variance, variance_mean;if (stats->n <2 )
tools/perf/util/stat.h +1 -0
@@ -12,6 +12,7 @@ struct statsvoid update_stats (struct stats *stats,u64 val);double avg_stats (struct stats *stats);double stddev_stats (struct stats *stats); +double stderr_stats (struct stats *stats);double rel_stddev_stats (double stddev,double avg);static inline void init_stats (struct stats *stats)
Signature · 1 line
1.7.11.7
PATCH v3 2/15 perf, callchain: Add generic callchain print handler for stdio
In reply to Don ZickusMy initial implementation for rbtree sorting in the c2c tool does not use the normal history elements. As a result, adding callchain support (which is deeply integrated with history elements) is more challenging when trying to display its output.
To make things simpler for myself (and to avoid rewriting the same code into the c2c tool), I provided a generic interface that takes an unsorted callchain list along with its total and relative sample size, and sorts it locally based on period and calls the appropriate graph function (passing the correct sample size).
This makes things easier because the c2c tool can be dumber and just collect callchains and not worry about the magic needed to sort and display them correctly.
Unfortunately, this is assuming a stdio output only and does not use the other gui type outputs.
Regardless, this patch provides useful info for the tool right now. Tweaks and recommendations for a better approach are welcomed. :-)
--- tools/perf/ui/stdio/hist.c | 37 +++++++++++++++++++++++++++++++++++++ tools/perf/util/hist.h | 4 ++++ 2 files changed, 41 insertions(+)
tools/perf/ui/stdio/hist.c +37 -0
@@ -529,3 +529,40 @@ size_t events_stats__fprintf(struct events_stats *stats, FILE *fp)return ret; } + +size_t generic_entry_callchain__fprintf (struct callchain_root *unsorted_callchain, +u64 total_samples,u64 relative_samples, +int left_margin,FILE *fp) +{ +struct rb_root sorted_chain; +u64 min_callchain_hits; + +if (!symbol_conf.use_callchain) +return 0 ; + + min_callchain_hits = total_samples * (callchain_param.min_percent /100 ); + + callchain_param.sort (&sorted_chain, unsorted_callchain, + min_callchain_hits, &callchain_param); + +switch (callchain_param.mode) { +case CHAIN_GRAPH_REL : +return callchain__fprintf_graph (fp, &sorted_chain, relative_samples, + left_margin); +break ; +case CHAIN_GRAPH_ABS : +return callchain__fprintf_graph (fp, &sorted_chain, total_samples, + left_margin); +break ; +case CHAIN_FLAT : +return callchain__fprintf_flat (fp, &sorted_chain, total_samples); +break ; +case CHAIN_NONE : +break ; +default : +pr_err ("Bad callchain mode\n" ); + } + +return 0 ; +} +
tools/perf/util/hist.h +4 -0
@@ -128,6 +128,10 @@ size_t events_stats__fprintf(struct events_stats *stats, FILE *fp);size_t hists__fprintf (struct hists *hists,bool show_header,int max_rows,int max_cols,float min_pcnt,FILE *fp); +size_t generic_entry_callchain__fprintf (struct callchain_root *unsorted_callchain, +u64 total_samples,u64 relative_samples, +int left_margin,FILE *fp); +void hists__filter_by_dso (struct hists *hists);void hists__filter_by_thread (struct hists *hists);void hists__filter_by_symbol (struct hists *hists);
Signature · 1 line
1.7.11.7
PATCH v3 3/15 perf c2c: Shared data analyser
In reply to Don ZickusFrom: Arnaldo Carvalho de Melo <[email protected]>
This is the start of a new perf tool that will collect information about memory accesses and analyse it to find things like hot cachelines, etc.
This is basically trying to get a prototype written by Richard Fowles written using the tools/perf coding style and libraries.
Start it from 'perf sched', this patch starts the process by adding the 'record' subcommand to collect the needed mem loads and stores samples.
It also have the basic 'report' skeleton, resolving the sample address and hooking the events found in a perf.data file with methods to handle them, right now just printing the resolved perf_sample data structure after each event name.
[dcz: refreshed to latest upstream changes]
--- tools/perf/Documentation/perf-c2c.c | 22 +++++ tools/perf/Makefile.perf | 1 + tools/perf/builtin-c2c.c | 185 ++++++++++++++++++++++++++++++++++++ tools/perf/builtin.h | 1 + tools/perf/perf.c | 1 + 5 files changed, 210 insertions(+) create mode 100644 tools/perf/Documentation/perf-c2c.c create mode 100644 tools/perf/builtin-c2c.c
tools/perf/Documentation/perf-c2c.c new file +22 -0
@@ -0,0 +1,22 @@ +perf-c2c (1 ) +=========== + +NAME +---- +perf-c2c - Shared Data C2C/HITM Analyzer. + +SYNOPSIS +-------- +[verse] +'perf c2c' record + +DESCRIPTION +----------- +These are the variants of perf c2c: + + 'perf c2c record <command>' to record the memory accesses of an arbitrary + workload. + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-mem[1]
tools/perf/Makefile.perf +1 -0
@@ -431,6 +431,7 @@ BUILTIN_OBJS += $(OUTPUT)bench/futex-hash.o BUILTIN_OBJS += $(OUTPUT)bench/futex-wake.o BUILTIN_OBJS += $(OUTPUT)bench/futex-requeue.o +BUILTIN_OBJS += $(OUTPUT)builtin-c2c.o BUILTIN_OBJS += $(OUTPUT)builtin-diff.o BUILTIN_OBJS += $(OUTPUT)builtin-evlist.o BUILTIN_OBJS += $(OUTPUT)builtin-help.o
tools/perf/builtin-c2c.c new file +185 -0
185 lines not on this page · raw message
tools/perf/builtin.h +1 -0
@@ -17,6 +17,7 @@ extern int cmd_annotate(int argc, const char **argv, const char *prefix);extern int cmd_bench (int argc,const char **argv,const char *prefix);extern int cmd_buildid_cache (int argc,const char **argv,const char *prefix);extern int cmd_buildid_list (int argc,const char **argv,const char *prefix); +extern int cmd_c2c (int argc,const char **argv,const char *prefix);extern int cmd_diff (int argc,const char **argv,const char *prefix);extern int cmd_evlist (int argc,const char **argv,const char *prefix);extern int cmd_help (int argc,const char **argv,const char *prefix);
tools/perf/perf.c +1 -0
@@ -35,6 +35,7 @@ struct cmd_struct {static struct cmd_struct commands[] = { {"buildid-cache" , cmd_buildid_cache,0 }, {"buildid-list" , cmd_buildid_list,0 }, + {"c2c" , cmd_c2c,0 }, {"diff" , cmd_diff,0 }, {"evlist" , cmd_evlist,0 }, {"help" , cmd_help,0 },
Signature · 1 line
1.7.11.7
Re: [PATCH 03/15 V3] perf c2c: Shared data analyser
Hi Don,
Quoted 4 lines · Don Zickus
From: Arnaldo Carvalho de Melo <[email protected]>
This is the start of a new perf tool that will collect information about memory accesses and analyse it to find things like hot cachelines, etc.
So why not integrating this into existing 'perf mem' command if it's all about analyzing memory accesses?
Quoted 13 lines
This is basically trying to get a prototype written by Richard Fowles written using the
tools/perfcoding style and libraries.Start it from 'perf sched', this patch starts the process by adding the 'record' subcommand to collect the needed mem loads and stores samples.
It also have the basic 'report' skeleton, resolving the sample address and hooking the events found in a perf.data file with methods to handle them, right now just printing the resolved
perf_sampledata structure after each event name.[dcz: refreshed to latest upstream changes]
[SNIP]
Quoted 12 lines
tools/perf/Documentation/perf-c2c.c new file +12
-0+perf-c2c (1 ) +=========== + +NAME +---- +perf-c2c - Shared Data C2C/HITM Analyzer. + +SYNOPSIS +-------- +[verse] +'perf c2c' record +
tools/perf/Documentation/perf-c2c.c line 22
Quoted 10 lines
tools/perf/Documentation/perf-c2c.c new file +10
-0+DESCRIPTION +----------- +These are the variants of perf c2c: + + 'perf c2c record <command>' to record the memory accesses of an arbitrary + workload. + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-mem[1]
This document is very terse and only memtions the 'record' subcommand - also it's not updated throughout the series. So I'd like to suggest adding a separate documentation patch with full/verbose descriptions at the end of this series.
[SNIP]
Quoted 20 lines
tools/perf/builtin-c2c.c new file +20
-0+static int perf_c2c__read_events (struct perf_c2c *c2c) +{ +int err =-1 ; +struct perf_session *session; +struct perf_data_file file = { + .path = input_name, + .mode =PERF_DATA_MODE_READ , + }; +struct perf_evsel *evsel; + + session =perf_session__new (&file,0 , &c2c->tool); +if (session ==NULL ) { +pr_debug ("No memory for session\n" ); + goto out; + } + +/* setup the evsel handlers for each event type */ +evlist__for_each (session->evlist, evsel) { +const char *name =perf_evsel__name (evsel); +unsigned int i;
tools/perf/builtin-c2c.c line 105
Quoted 10 lines
tools/perf/builtin-c2c.c new file +10
-0+ +for (i =0 ; i <ARRAY_SIZE (handlers); i++) { +if (!strcmp (name, handlers[i].name)) + evsel->handler = handlers[i].handler; + } + } + + err =perf_session__process_events (session, &c2c->tool); +if (err) +pr_err ("Failed to process events, error %d" , err);
You may want to add perf_session__delete() here.
Quoted 4 lines
tools/perf/builtin-c2c.c new file +4
-0+ +out: +return err; +}
[SNIP]
tools/perf/builtin-c2c.c line 159
Quoted 9 lines
tools/perf/builtin-c2c.c new file +9
-0+int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) +{ +struct perf_c2c c2c = { + .tool = { + .sample = perf_c2c__process_sample, + .comm = perf_event__process_comm, + .exit = perf_event__process_exit, + .fork = perf_event__process_fork, + .lost = perf_event__process_lost,
It seems that it also needs to handle mmap[2] events otherwise it cannot find symbols from an address.
Thanks,
Namhyung
Quoted 3 lines
tools/perf/builtin-c2c.c new file +3
-0+ .ordered_samples = true, + }, + };
Re: [PATCH 03/15 V3] perf c2c: Shared data analyser
Quoted 1 line · Namhyung Kim
Hi Don,
Oh by the way, thank you for your review. I will clean up a bunch of stuff based on your suggestions.
Cheers,
Don
Quoted 115 lines · Don Zickus
Quoted 4 lines
From: Arnaldo Carvalho de Melo <[email protected]>
This is the start of a new perf tool that will collect information about memory accesses and analyse it to find things like hot cachelines, etc.
So why not integrating this into existing 'perf mem' command if it's all about analyzing memory accesses?
Quoted 13 lines
This is basically trying to get a prototype written by Richard Fowles written using the
tools/perfcoding style and libraries.Start it from 'perf sched', this patch starts the process by adding the 'record' subcommand to collect the needed mem loads and stores samples.
It also have the basic 'report' skeleton, resolving the sample address and hooking the events found in a perf.data file with methods to handle them, right now just printing the resolved
perf_sampledata structure after each event name.[dcz: refreshed to latest upstream changes]
[SNIP]
Quoted 12 lines
tools/perf/Documentation/perf-c2c.c new file +12
-0+perf-c2c (1 ) +=========== + +NAME +---- +perf-c2c - Shared Data C2C/HITM Analyzer. + +SYNOPSIS +-------- +[verse] +'perf c2c' record +tools/perf/Documentation/perf-c2c.c line 22
Quoted 10 lines
tools/perf/Documentation/perf-c2c.c new file +10
-0+DESCRIPTION +----------- +These are the variants of perf c2c: + + 'perf c2c record <command>' to record the memory accesses of an arbitrary + workload. + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-mem[1]This document is very terse and only memtions the 'record' subcommand - also it's not updated throughout the series. So I'd like to suggest adding a separate documentation patch with full/verbose descriptions at the end of this series.
[SNIP]
Quoted 20 lines
tools/perf/builtin-c2c.c new file +20
-0+static int perf_c2c__read_events (struct perf_c2c *c2c) +{ +int err =-1 ; +struct perf_session *session; +struct perf_data_file file = { + .path = input_name, + .mode =PERF_DATA_MODE_READ , + }; +struct perf_evsel *evsel; + + session =perf_session__new (&file,0 , &c2c->tool); +if (session ==NULL ) { +pr_debug ("No memory for session\n" ); + goto out; + } + +/* setup the evsel handlers for each event type */ +evlist__for_each (session->evlist, evsel) { +const char *name =perf_evsel__name (evsel); +unsigned int i;tools/perf/builtin-c2c.c line 105
Quoted 10 lines
tools/perf/builtin-c2c.c new file +10
-0+ +for (i =0 ; i <ARRAY_SIZE (handlers); i++) { +if (!strcmp (name, handlers[i].name)) + evsel->handler = handlers[i].handler; + } + } + + err =perf_session__process_events (session, &c2c->tool); +if (err) +pr_err ("Failed to process events, error %d" , err);You may want to add
perf_session__delete()here.Quoted 4 lines
tools/perf/builtin-c2c.c new file +4
-0+ +out: +return err; +}[SNIP]
tools/perf/builtin-c2c.c line 159
Quoted 9 lines
tools/perf/builtin-c2c.c new file +9
-0+int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) +{ +struct perf_c2c c2c = { + .tool = { + .sample = perf_c2c__process_sample, + .comm = perf_event__process_comm, + .exit = perf_event__process_exit, + .fork = perf_event__process_fork, + .lost = perf_event__process_lost,It seems that it also needs to handle mmap[2] events otherwise it cannot find symbols from an address.
Thanks,
NamhyungQuoted 3 lines
tools/perf/builtin-c2c.c new file +3
-0+ .ordered_samples = true, + }, + };
Re: [PATCH 03/15 V3] perf c2c: Shared data analyser
In reply to Namhyung KimQuoted 10 lines · Namhyung Kim
Hi Don,
Quoted 4 lines · Don Zickus
From: Arnaldo Carvalho de Melo <[email protected]>
This is the start of a new perf tool that will collect information about memory accesses and analyse it to find things like hot cachelines, etc.
So why not integrating this into existing 'perf mem' command if it's all about analyzing memory accesses?
Our expectations were different. We expeted to do system-wide analysis with loads and stores. With 'perf mem' you didn't have the ability to anlayze both load and stores at the same time.
In all my private conversations with Stephane, Arnalado and Jiri, it was never brought up. We had just assumed that is made more sense to keep it separate.
Quoted 106 lines
Quoted 14 lines
This is basically trying to get a prototype written by Richard Fowles written using the
tools/perfcoding style and libraries.Start it from 'perf sched', this patch starts the process by adding the 'record' subcommand to collect the needed mem loads and stores samples.
It also have the basic 'report' skeleton, resolving the sample address and hooking the events found in a perf.data file with methods to handle them, right now just printing the resolved
perf_sampledata structure after each event name.[dcz: refreshed to latest upstream changes]
[SNIP]
Quoted 12 lines
tools/perf/Documentation/perf-c2c.c new file +12
-0+perf-c2c (1 ) +=========== + +NAME +---- +perf-c2c - Shared Data C2C/HITM Analyzer. + +SYNOPSIS +-------- +[verse] +'perf c2c' record +tools/perf/Documentation/perf-c2c.c line 22
Quoted 10 lines
tools/perf/Documentation/perf-c2c.c new file +10
-0+DESCRIPTION +----------- +These are the variants of perf c2c: + + 'perf c2c record <command>' to record the memory accesses of an arbitrary + workload. + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-mem[1]This document is very terse and only memtions the 'record' subcommand - also it's not updated throughout the series. So I'd like to suggest adding a separate documentation patch with full/verbose descriptions at the end of this series.
[SNIP]
Quoted 20 lines
tools/perf/builtin-c2c.c new file +20
-0+static int perf_c2c__read_events (struct perf_c2c *c2c) +{ +int err =-1 ; +struct perf_session *session; +struct perf_data_file file = { + .path = input_name, + .mode =PERF_DATA_MODE_READ , + }; +struct perf_evsel *evsel; + + session =perf_session__new (&file,0 , &c2c->tool); +if (session ==NULL ) { +pr_debug ("No memory for session\n" ); + goto out; + } + +/* setup the evsel handlers for each event type */ +evlist__for_each (session->evlist, evsel) { +const char *name =perf_evsel__name (evsel); +unsigned int i;tools/perf/builtin-c2c.c line 105
Quoted 10 lines
tools/perf/builtin-c2c.c new file +10
-0+ +for (i =0 ; i <ARRAY_SIZE (handlers); i++) { +if (!strcmp (name, handlers[i].name)) + evsel->handler = handlers[i].handler; + } + } + + err =perf_session__process_events (session, &c2c->tool); +if (err) +pr_err ("Failed to process events, error %d" , err);You may want to add
perf_session__delete()here.Quoted 4 lines
tools/perf/builtin-c2c.c new file +4
-0+ +out: +return err; +}[SNIP]
tools/perf/builtin-c2c.c line 159
Quoted 9 lines
tools/perf/builtin-c2c.c new file +9
-0+int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) +{ +struct perf_c2c c2c = { + .tool = { + .sample = perf_c2c__process_sample, + .comm = perf_event__process_comm, + .exit = perf_event__process_exit, + .fork = perf_event__process_fork, + .lost = perf_event__process_lost,It seems that it also needs to handle mmap[2] events otherwise it cannot find symbols from an address.
Thanks,
NamhyungQuoted 3 lines
tools/perf/builtin-c2c.c new file +3
-0+ .ordered_samples = true, + }, + };
Namhyung Kim
maintainerRe: [PATCH 03/15 V3] perf c2c: Shared data analyser
Quoted 9 lines · Don Zickus
Quoted 8 lines · Namhyung Kim
Hi Don,
Quoted 4 lines · Don Zickus
From: Arnaldo Carvalho de Melo <[email protected]>
This is the start of a new perf tool that will collect information about memory accesses and analyse it to find things like hot cachelines, etc.
Quoted 6 lines
Quoted 2 lines
So why not integrating this into existing 'perf mem' command if it's all about analyzing memory accesses?
Our expectations were different. We expeted to do system-wide analysis with loads and stores. With 'perf mem' you didn't have the ability to anlayze both load and stores at the same time.
But it's very simple to change perf mem to work with the both IMHO.
Quoted 4 lines
In all my private conversations with Stephane, Arnalado and Jiri, it was never brought up. We had just assumed that is made more sense to keep it separate.
Well, I'm not sure ;-) Yes, the c2c is a complex tool which might deserve an own command, but the functionality is very similar and I guess there's something to share between them.
Thanks,
Namhyung
Re: [PATCH 03/15 V3] perf c2c: Shared data analyser
Quoted 4 lines · Namhyung Kim
Well, I'm not sure ;-) Yes, the c2c is a complex tool which might deserve an own command, but the functionality is very similar and I guess there's something to share between them.
They work very differently. I don't see a lot of potential for sharing.
perf mem is basically just a way to annotate normal samples slightly with addresses, while c2c is fundamentally address driven.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only
PATCH v3 4/15 perf c2c: Dump raw records, decode data_src bits
In reply to Don ZickusFrom: Arnaldo Carvalho de Melo <[email protected]>
Quoted 1 line
From the c2c prototype:
[root@sandy ~]# perf c2c -r report | head -7
T Status Pid Tid CPU Inst Adrs Virt Data Adrs Phys Data Adrs Cycles Source Decoded Source ObJect:Symbol
--------------------------------------------------------------------------------------------------------------------------------------------
raw input 779 779 7 0xffffffff810865dd 0xffff8803f4d75ec8 0 370 0x68080882 [LOAD,LCL_LLC,MISS,SNP NA] [kernel.kallsyms]:try_to_wake_up raw input 779 779 7 0xffffffff8107acb3 0xffff8802a5b73158 0 297 0x6a100142 [LOAD,L1,HIT,SNP NONE,LOCKED] [kernel.kallsyms]:up_read raw input 779 779 7 0x3b7e009814 0x7fff87429ea0 0 925 0x68100142 [LOAD,L1,HIT,SNP NONE] ???:??? raw input 0 0 1 0xffffffff8108bf81 0xffff8803eafebf50 0 172 0x68800842 [LOAD,LCL_LLC,HIT,SNP HITM] [kernel.kallsyms]:update_stats_wait_end raw input 779 779 7 0x3b7e0097cc 0x7fac94b69068 0 228 0x68100242 [LOAD,LFB,HIT,SNP NONE] ???:???
[root@sandy ~]#
The "Phys Data Adrs" column is not available at this point.
--- tools/perf/builtin-c2c.c | 148 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 125 insertions(+), 23 deletions(-)
tools/perf/builtin-c2c.c +125 -23
@@ -11,51 +11,148 @@struct perf_c2c {struct perf_tool tool; +bool raw_records; }; -static int perf_sample__fprintf (struct perf_sample *sample, -struct perf_evsel *evsel, -struct addr_location *al,FILE *fp) +enum {OP ,LVL ,SNP ,LCK ,TLB }; + +static int perf_c2c__scnprintf_data_src (char *bf,size_t size,uint64_t val) { -return fprintf (fp,"%25.25s: %5d %5d 0x%016" PRIx64" 0x016%" PRIx64" %5" PRIu64" 0x%06" PRIx64" %s:%s\n" , -perf_evsel__name (evsel), - sample->pid, sample->tid, sample->ip, sample->addr, - sample->weight, sample->data_src, - al->map ? (al->map->dso ? al->map->dso->long_name :"???" ) :"???" , - al->sym ? al->sym->name :"???" ); +#define PREFIX "[" +#define SUFFIX "]" +#define ELLIPSIS "..." +static const struct { +uint64_t bit; +int64_t field; +const char *name; + } decode_bits[] = { + {PERF_MEM_OP_LOAD ,OP ,"LOAD" }, + {PERF_MEM_OP_STORE ,OP ,"STORE" }, + {PERF_MEM_OP_NA ,OP ,"OP_NA" }, + {PERF_MEM_LVL_LFB ,LVL ,"LFB" }, + {PERF_MEM_LVL_L1 ,LVL ,"L1" }, + {PERF_MEM_LVL_L2 ,LVL ,"L2" }, + {PERF_MEM_LVL_L3 ,LVL ,"LCL_LLC" }, + {PERF_MEM_LVL_LOC_RAM ,LVL ,"LCL_RAM" }, + {PERF_MEM_LVL_REM_RAM1 ,LVL ,"RMT_RAM" }, + {PERF_MEM_LVL_REM_RAM2 ,LVL ,"RMT_RAM" }, + {PERF_MEM_LVL_REM_CCE1 ,LVL ,"RMT_LLC" }, + {PERF_MEM_LVL_REM_CCE2 ,LVL ,"RMT_LLC" }, + {PERF_MEM_LVL_IO ,LVL ,"I/O" }, + {PERF_MEM_LVL_UNC ,LVL ,"UNCACHED" }, + {PERF_MEM_LVL_NA ,LVL ,"N" }, + {PERF_MEM_LVL_HIT ,LVL ,"HIT" }, + {PERF_MEM_LVL_MISS ,LVL ,"MISS" }, + {PERF_MEM_SNOOP_NONE ,SNP ,"SNP NONE" }, + {PERF_MEM_SNOOP_HIT ,SNP ,"SNP HIT" }, + {PERF_MEM_SNOOP_MISS ,SNP ,"SNP MISS" }, + {PERF_MEM_SNOOP_HITM ,SNP ,"SNP HITM" }, + {PERF_MEM_SNOOP_NA ,SNP ,"SNP NA" }, + {PERF_MEM_LOCK_LOCKED ,LCK ,"LOCKED" }, + {PERF_MEM_LOCK_NA ,LCK ,"LOCK_NA" }, + }; +union perf_mem_data_src dsrc = { .val = val, }; +int printed =scnprintf (bf, size,PREFIX ); +size_t i; +bool first_present = true; + +for (i =0 ; i <ARRAY_SIZE (decode_bits); i++) { +int bitval; + +switch (decode_bits[i].field) { +case OP : bitval = decode_bits[i].bit & dsrc.mem_op;break ; +case LVL : bitval = decode_bits[i].bit & dsrc.mem_lvl;break ; +case SNP : bitval = decode_bits[i].bit & dsrc.mem_snoop;break ; +case LCK : bitval = decode_bits[i].bit & dsrc.mem_lock;break ; +case TLB : bitval = decode_bits[i].bit & dsrc.mem_dtlb;break ; +default : bitval =0 ;break ; + } + +if (!bitval) +continue ; + +if (strlen (decode_bits[i].name) + !!i > size - printed -sizeof (SUFFIX )) { +sprintf (bf + size -sizeof (SUFFIX ) -sizeof (ELLIPSIS ) +1 ,ELLIPSIS ); + printed = size -sizeof (SUFFIX ); +break ; + } + + printed +=scnprintf (bf + printed, size - printed,"%s%s" , + first_present ?"" :"," , decode_bits[i].name); + first_present = false; + } + + printed +=scnprintf (bf + printed, size - printed,SUFFIX ); +return printed; } -static int perf_c2c__process_load (struct perf_evsel *evsel, -struct perf_sample *sample, -struct addr_location *al) +static int perf_c2c__fprintf_header (FILE *fp) { -perf_sample__fprintf (sample, evsel, al, stdout); -return 0 ; +int printed =fprintf (fp,"%c %-16s %6s %6s %4s %18s %18s %18s %6s %-10s %-60s %s\n" , +'T' , +"Status" , +"Pid" , +"Tid" , +"CPU" , +"Inst Adrs" , +"Virt Data Adrs" , +"Phys Data Adrs" , +"Cycles" , +"Source" , +" Decoded Source" , +"ObJect:Symbol" ); +return printed +fprintf (fp,"%-*.*s\n" , printed, printed, graph_dotted_line); +} + +static int perf_sample__fprintf (struct perf_sample *sample,char tag, +const char *reason,struct addr_location *al,FILE *fp) +{ +char data_src[61 ]; + +perf_c2c__scnprintf_data_src (data_src,sizeof (data_src), sample->data_src); + +return fprintf (fp,"%c %-16s %6d %6d %4d %#18" PRIx64" %#18" PRIx64" %#18" PRIx64" %6" PRIu64" %#10" PRIx64" %-60.60s %s:%s\n" , + tag, + reason ?:"valid record" , + sample->pid, + sample->tid, + sample->cpu, + sample->ip, + sample->addr, +0UL , + sample->weight, + sample->data_src, + data_src, + al->map ? (al->map->dso ? al->map->dso->long_name :"???" ) :"???" , + al->sym ? al->sym->name :"???" ); } -static int perf_c2c__process_store (struct perf_evsel *evsel, -struct perf_sample *sample, -struct addr_location *al) +static int perf_c2c__process_load_store (struct perf_c2c *c2c, +struct perf_sample *sample, +struct addr_location *al) { -perf_sample__fprintf (sample, evsel, al, stdout); +if (c2c->raw_records) +perf_sample__fprintf (sample,' ' ,"raw input" , al, stdout); +return 0 ; }static const struct perf_evsel_str_handler handlers[] = { - {"cpu/mem-loads,ldlat=30/pp" , perf_c2c__process_load, }, - {"cpu/mem-stores/pp" , perf_c2c__process_store, }, + {"cpu/mem-loads,ldlat=30/pp" , perf_c2c__process_load_store, }, + {"cpu/mem-stores/pp" , perf_c2c__process_load_store, }, }; -typedef int (*sample_handler )(struct perf_evsel *evsel, +typedef int (*sample_handler )(struct perf_c2c *c2c,struct perf_sample *sample,struct addr_location *al); -static int perf_c2c__process_sample (struct perf_tool *tool__maybe_unused , +static int perf_c2c__process_sample (struct perf_tool *tool,union perf_event *event,struct perf_sample *sample,struct perf_evsel *evsel,struct machine *machine) { + struct perf_c2c *c2c = container_of(tool, struct perf_c2c, tool);struct addr_location al;int err =0 ;
@@ -67,7 +164,7 @@ static int perf_c2c__process_sample(struct perf_tool *tool __maybe_unused,if (evsel->handler !=NULL ) {sample_handler f = evsel->handler; - err =f (evsel, sample, &al); + err =f (c2c, sample, &al); }return err;
@@ -111,6 +208,10 @@ out:static int perf_c2c__report (struct perf_c2c *c2c) {setup_pager (); + +if (c2c->raw_records) +perf_c2c__fprintf_header (stdout); +return perf_c2c__read_events (c2c); }
@@ -161,6 +262,7 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) }, };const struct option c2c_options[] = { +OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ),OPT_END () };const char *const c2c_usage[] = {
Signature · 1 line
1.7.11.7
Re: [PATCH 04/15 V3] perf c2c: Dump raw records, decode data_src bits
Quoted 22 lines · Don Zickus
tools/perf/builtin-c2c.c +22
-0+union perf_mem_data_src dsrc = { .val = val, }; +int printed =scnprintf (bf, size,PREFIX ); +size_t i; +bool first_present = true; + +for (i =0 ; i <ARRAY_SIZE (decode_bits); i++) { +int bitval; + +switch (decode_bits[i].field) { +case OP : bitval = decode_bits[i].bit & dsrc.mem_op;break ; +case LVL : bitval = decode_bits[i].bit & dsrc.mem_lvl;break ; +case SNP : bitval = decode_bits[i].bit & dsrc.mem_snoop;break ; +case LCK : bitval = decode_bits[i].bit & dsrc.mem_lock;break ; +case TLB : bitval = decode_bits[i].bit & dsrc.mem_dtlb;break ; +default : bitval =0 ;break ; + } + +if (!bitval) +continue ; + +if (strlen (decode_bits[i].name) + !!i > size - printed -sizeof (SUFFIX )) { +sprintf (bf + size -sizeof (SUFFIX ) -sizeof (ELLIPSIS ) +1 ,ELLIPSIS );
tools/perf/builtin-c2c.c line 85
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+ printed = size -sizeof (SUFFIX ); +break ; + } + + printed +=scnprintf (bf + printed, size - printed,"%s%s" , + first_present ?"" :"," , decode_bits[i].name); + first_present = false; + } + + printed +=scnprintf (bf + printed, size - printed,SUFFIX );
It seems that adjusting bf and size as printed might make the code somewhat simpler and readable - i.e.:
ret = scnprintf(bf, size, "%s", ...);
bf += ret;
size -= ret;
printed += ret;Quoted 13 lines
tools/perf/builtin-c2c.c +5
-5+return printed; } -static int perf_c2c__process_load (struct perf_evsel *evsel, -struct perf_sample *sample, -struct addr_location *al) +static int perf_c2c__fprintf_header (FILE *fp) { -perf_sample__fprintf (sample, evsel, al, stdout); -return 0 ; + int printed = fprintf(fp, "%c %-16s %6s %6s %4s %18s %18s %18s %6s %-10s %-60s %s\n", + 'T', + "Status",
tools/perf/builtin-c2c.c line 103
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+"Pid" , +"Tid" , +"CPU" , +"Inst Adrs" , +"Virt Data Adrs" , +"Phys Data Adrs" , +"Cycles" , +"Source" , +" Decoded Source" , + "ObJect:Symbol");
s/ObJect/Object/ ?
Thanks,
Namhyung
Quoted 2 lines
tools/perf/builtin-c2c.c +2
-0+return printed +fprintf (fp,"%-*.*s\n" , printed, printed, graph_dotted_line); +}
PATCH v3 5/15 perf, c2c: Rework setup code to prepare for features
In reply to Don ZickusA basic patch that re-arranges some of the c2c code and adds a couple of small features to lay the ground work for the rest of the patch series.
Changes include:
o reworking the report path
o replace preprocess_sample with simpler calls
o rework raw output to handle separators
o remove phys id gunk
o add some generic options
There isn't much meat in this patch just a bunch of code movement and cleanups.
V2: refresh to latest upstream changes
--- tools/perf/builtin-c2c.c | 125 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 93 insertions(+), 32 deletions(-)
tools/perf/builtin-c2c.c +93 -32
@@ -5,6 +5,7 @@#include "util/parse-options.h" #include "util/session.h" #include "util/tool.h" +#include "util/debug.h" #include <linux/compiler.h> #include <linux/kernel.h>
@@ -105,34 +106,55 @@ static int perf_c2c__fprintf_header(FILE *fp) }static int perf_sample__fprintf (struct perf_sample *sample,char tag, -const char *reason,struct addr_location *al,FILE *fp) +const char *reason,struct mem_info *mi,FILE *fp) {char data_src[61 ]; +const char *fmt, *sep; +struct map *map = mi->iaddr.map;perf_c2c__scnprintf_data_src (data_src,sizeof (data_src), sample->data_src); -return fprintf (fp,"%c %-16s %6d %6d %4d %#18" PRIx64" %#18" PRIx64" %#18" PRIx64" %6" PRIu64" %#10" PRIx64" %-60.60s %s:%s\n" , - tag, - reason ?:"valid record" , - sample->pid, - sample->tid, - sample->cpu, - sample->ip, - sample->addr, -0UL , - sample->weight, - sample->data_src, - data_src, - al->map ? (al->map->dso ? al->map->dso->long_name :"???" ) :"???" , - al->sym ? al->sym->name :"???" ); +if (symbol_conf.field_sep) { + fmt ="%c%s%s%s%d%s%d%s%d%s%#" PRIx64"%s%#" PRIx64"%s" +"%" PRIu64"%s%#" PRIx64"%s%s%s%s:%s\n" ; + sep = symbol_conf.field_sep; + }else { + fmt ="%c%s%-16s%s%6d%s%6d%s%4d%s%#18" PRIx64"%s%#18" PRIx64"%s" +"%6" PRIu64"%s%#10" PRIx64"%s%-60.60s%s%s:%s\n" ; + sep =" " ; + } + +return fprintf (fp, fmt, + tag, sep, + reason ?:"valid record" , sep, + sample->pid, sep, + sample->tid, sep, + sample->cpu, sep, + sample->ip, sep, + sample->addr, sep, + sample->weight, sep, + sample->data_src, sep, + data_src, sep, + map ? (map->dso ? map->dso->long_name :"???" ) :"???" , + mi->iaddr.sym ? mi->iaddr.sym->name :"???" ); }static int perf_c2c__process_load_store (struct perf_c2c *c2c, +struct addr_location *al,struct perf_sample *sample, -struct addr_location *al) +struct perf_evsel *evsel) { -if (c2c->raw_records) -perf_sample__fprintf (sample,' ' ,"raw input" , al, stdout); +struct mem_info *mi; + + mi =sample__resolve_mem (sample, al); +if (!mi) +return -ENOMEM ; + +if (c2c->raw_records) { +perf_sample__fprintf (sample,' ' ,"raw input" , mi, stdout); +free (mi); +return 0 ; + }return 0 ; }
@@ -143,8 +165,9 @@ static const struct perf_evsel_str_handler handlers[] = { };typedef int (*sample_handler )(struct perf_c2c *c2c, +struct addr_location *al,struct perf_sample *sample, -struct addr_location *al); +struct perf_evsel *evsel); static int perf_c2c__process_sample(struct perf_tool *tool, union perf_event *event,
@@ -153,20 +176,51 @@ static int perf_c2c__process_sample(struct perf_tool *tool, struct machine *machine) { struct perf_c2c *c2c = container_of(tool, struct perf_c2c, tool); -struct addr_location al; -int err =0 ; +u8 cpumode = event->header.misc &PERF_RECORD_MISC_CPUMODE_MASK ; +struct thread *thread; +sample_handler f; +int err =-1 ; +struct addr_location al = { + .machine = machine, + .cpu = sample->cpu, + .cpumode = cpumode, + }; + +if (evsel->handler ==NULL ) +return 0 ; -if (perf_event__preprocess_sample (event, machine, &al, sample) <0 ) { -pr_err ("problem processing %d event, skipping it.\n" , - event->header.type); -return -1 ; + thread =machine__find_thread (machine, sample->pid, sample->tid); +if (thread ==NULL ) { +printf ("Could not find thread for tid %d\n" , sample->tid); +return 0 ; } -if (evsel->handler !=NULL ) { -sample_handler f = evsel->handler; - err =f (c2c, sample, &al); + al.thread = thread; + + f = evsel->handler; + err =f (c2c, &al, sample, evsel); +if (err) + goto err; + +return 0 ; +err: +if (err >0 ) + err =0 ; +return err; +} + +static int perf_c2c__process_events (struct perf_session *session, +struct perf_c2c *c2c) +{ +int err =-1 ; + + err =perf_session__process_events (session, &c2c->tool); +if (err) { +pr_err ("Failed to process count events, error %d\n" , err); + goto err; } +err:return err; }
@@ -197,9 +251,7 @@ static int perf_c2c__read_events(struct perf_c2c *c2c) } } - err =perf_session__process_events (session, &c2c->tool); -if (err) -pr_err ("Failed to process events, error %d" , err); + err =perf_c2c__process_events (session, c2c); out:return err;
@@ -221,7 +273,6 @@ static int perf_c2c__record(int argc, const char **argv)const char **rec_argv;const char *const record_args[] = {"record" , -/* "--phys-addr", */ "-W" ,"-d" ,"-a" ,
@@ -254,6 +305,8 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused)struct perf_c2c c2c = { .tool = { .sample = perf_c2c__process_sample, + .mmap2 = perf_event__process_mmap2, + .mmap = perf_event__process_mmap, .comm = perf_event__process_comm, .exit = perf_event__process_exit, .fork = perf_event__process_fork,
@@ -263,6 +316,14 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INCR ('v' ,"verbose" , &verbose, +"be more verbose (show counter open errors, etc)" ), +OPT_STRING ('i' ,"input" , &input_name,"file" , +"the input file to process" ), +OPT_STRING ('x' ,"field-separator" , &symbol_conf.field_sep, +"separator" , +"separator for columns, no spaces will be added" +" between columns '.' is reserved." ),OPT_END () };const char *const c2c_usage[] = {
Signature · 1 line
1.7.11.7
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 4 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +1
-0+ struct addr_location *al, struct perf_sample *sample,
Review
Quoted 10 lines
(quoted diff) +6
-3- struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi; + + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;
perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
I wonder why we need this VARIABLE/FUNCTION separation at all, I think Arnaldo told me some archs could have same addresses for data and functions.. will check ;-)
jirka
---
tools/perf/util/machine.c +4 -0
@@ -1220,6 +1220,10 @@ static void ip__resolve_data(struct machine *machine, struct thread *thread,thread__find_addr_location (thread, machine, m,MAP__VARIABLE , addr, &al); +if (!al.map) +thread__find_addr_location (thread, machine, m,MAP__FUNCTION , addr, + &al); + ams->addr = addr; ams->al_addr = al.addr; ams->sym = al.sym;
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
Quoted 23 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 4 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +1
-0+ struct addr_location *al, struct perf_sample *sample,Review
Quoted 10 lines
(quoted diff) +6
-3- struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi; + + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Quoted 3 lines
I wonder why we need this VARIABLE/FUNCTION separation at all, I think Arnaldo told me some archs could have same addresses for data and functions.. will check ;-)
Well that hack is a lot prettier than the one I came up with a couple of weeks ago. :-) Though I was more strict and only went down this path if the protection bit had PROT_READ set.
Note to Arnaldo, I think this is only needed in //anon regions or the [stack] (basically some private memory area that had PROT_READ and PROT_EXEC set). I noticed it with the java programs I was running.
Cheers,
Don
Quoted 19 lines
jirka
---
tools/perf/util/machine.c +4
-0@@ -1220,6 +1220,10 @@ static void ip__resolve_data(struct machine *machine, struct thread *thread,thread__find_addr_location (thread, machine, m,MAP__VARIABLE , addr, &al); +if (!al.map) +thread__find_addr_location (thread, machine, m,MAP__FUNCTION , addr, + &al); + ams->addr = addr; ams->al_addr = al.addr; ams->sym = al.sym;
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
In reply to Jiri OlsaQuoted 14 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 10 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +3
-3+ struct addr_location *al, struct perf_sample *sample, - struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi;
Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Wasn't it a read-only/const data?
Hmm.. maybe we could copy the text map and add it to a variable map group if it has any variables in it..
Thanks,
Namhyung
Quoted 23 lines
I wonder why we need this VARIABLE/FUNCTION separation at all, I think Arnaldo told me some archs could have same addresses for data and functions.. will check ;-)
jirka
---
tools/perf/util/machine.c +4
-0@@ -1220,6 +1220,10 @@ static void ip__resolve_data(struct machine *machine, struct thread *thread,thread__find_addr_location (thread, machine, m,MAP__VARIABLE , addr, &al); +if (!al.map) +thread__find_addr_location (thread, machine, m,MAP__FUNCTION , addr, + &al); + ams->addr = addr; ams->al_addr = al.addr; ams->sym = al.sym;
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
Quoted 24 lines · Namhyung Kim
Quoted 14 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 10 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +3
-3+ struct addr_location *al, struct perf_sample *sample, - struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi;Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Quoted 1 line
Wasn't it a read-only/const data?
I believe it had the 'x' bit set. Or the kernel was not passing any protection bits, so it defaulted to MAP_FUNCTION?
Cheers,
Don
Quoted 30 lines
Hmm.. maybe we could copy the text map and add it to a variable map group if it has any variables in it..
Thanks,
NamhyungQuoted 23 lines
I wonder why we need this VARIABLE/FUNCTION separation at all, I think Arnaldo told me some archs could have same addresses for data and functions.. will check ;-)
jirka
---
tools/perf/util/machine.c +4
-0@@ -1220,6 +1220,10 @@ static void ip__resolve_data(struct machine *machine, struct thread *thread,thread__find_addr_location (thread, machine, m,MAP__VARIABLE , addr, &al); +if (!al.map) +thread__find_addr_location (thread, machine, m,MAP__FUNCTION , addr, + &al); + ams->addr = addr; ams->al_addr = al.addr; ams->sym = al.sym;
Namhyung Kim
maintainerRe: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
Quoted 25 lines · Don Zickus
Quoted 24 lines · Namhyung Kim
Quoted 22 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 4 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +1
-0+ struct addr_location *al, struct perf_sample *sample,Review
Quoted 10 lines
(quoted diff) +6
-3- struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi; + + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Quoted 4 lines
Quoted 1 line
Wasn't it a read-only/const data?
I believe it had the 'x' bit set. Or the kernel was not passing any protection bits, so it defaulted to
MAP_FUNCTION?
The perf treats a mapping as a data mapping (MAP_VARIABLE) by default if the 'x' bit is not set. As Jiri said its a static data, I guessed it's a const data (set to 0?) and moved into .rodata section and then to the text segment.
Thanks,
Namhyung
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
Quoted 28 lines · Namhyung Kim
Quoted 27 lines · Don Zickus
Quoted 25 lines · Namhyung Kim
Quoted 14 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 10 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +3
-3+ struct addr_location *al, struct perf_sample *sample, - struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi;Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Wasn't it a read-only/const data?
Quoted 7 lines
Quoted 2 lines
I believe it had the 'x' bit set. Or the kernel was not passing any protection bits, so it defaulted to
MAP_FUNCTION?The perf treats a mapping as a data mapping (
MAP_VARIABLE) by default if the 'x' bit is not set. As Jiri said its a static data, I guessed it's a const data (set to 0?) and moved into .rodata section and then to the text segment.
Unfortunately, his patch will be needed eventually, if not for his reason, I had a java JAR file example that was pulling data addresses out of a shared memory region with the protection bits set to 'rwx' (in the /proc/<pid>/maps area). I was losing lots of samples until I came up with a more complicated hack.
I will try to dig up my example, so you can see, so it doesn't sound like I am making this up. :-)
Cheers,
Don
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
Quoted 29 lines · Don Zickus
Quoted 28 lines · Namhyung Kim
Quoted 27 lines · Don Zickus
Quoted 25 lines · Namhyung Kim
Quoted 14 lines · Jiri Olsa
On Mon, Mar 24, 2014 at 03:36:56PM -0400, Don Zickus wrote:
SNIP
Quoted 10 lines
static int perf_c2c__process_load_store(struct
perf_c2c*c2c,(quoted diff) +3
-3+ struct addr_location *al, struct perf_sample *sample, - struct addr_location *al) + struct perf_evsel *evsel) { - if (c2c->raw_records) - perf_sample__fprintf(sample, ' ', "raw input", al, stdout); + struct mem_info *mi;Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ + mi = sample__resolve_mem(sample, al); + if (!mi) + return -ENOMEM;perhaps not directly related to this patchset, but I needed attached patch to get resolved data in .bss (static), which for some reason happened to be located in executable segment
Wasn't it a read-only/const data?
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
I believe it had the 'x' bit set. Or the kernel was not passing any protection bits, so it defaulted to
MAP_FUNCTION?The perf treats a mapping as a data mapping (
MAP_VARIABLE) by default if the 'x' bit is not set. As Jiri said its a static data, I guessed it's a const data (set to 0?) and moved into .rodata section and then to the text segment.
it was not initialized static data, .. not sure why it ended up in text segment, because I dont see it anymore :-)
Quoted 6 lines
Unfortunately, his patch will be needed eventually, if not for his reason, I had a java JAR file example that was pulling data addresses out of a shared memory region with the protection bits set to 'rwx' (in the /proc/<pid>/maps area). I was losing lots of samples until I came up with a more complicated hack.
also, I think nothing prevents user from mapping memory as 'rwx' and load/store data there.. we should be able to handle this case
jirka
Re: [PATCH 05/15 V3] perf, c2c: Rework setup code to prepare for features
In reply to Don ZickusQuoted 11 lines · Don Zickus
A basic patch that re-arranges some of the c2c code and adds a couple of small features to lay the ground work for the rest of the patch series.
Changes include:
o reworking the report path
o replacepreprocess_samplewith simpler calls
o rework raw output to handle separators
o remove phys id gunk
o add some generic options
[SNIP]
tools/perf/builtin-c2c.c static int perf_c2c__fprintf_header(FILE *fp) · line 138
Quoted 13 lines
tools/perf/builtin-c2c.c +12
-0+ return fprintf(fp, fmt, + tag, sep, + reason ?: "valid record", sep, + sample->pid, sep, + sample->tid, sep, + sample->cpu, sep, + sample->ip, sep, + sample->addr, sep, + sample->weight, sep, + sample->data_src, sep, + data_src, sep, + map ? (map->dso ? map->dso->long_name : "???") : "???",
How about using this instead?
(map && map->dso) ? map->dso->long_name : "???".
Quoted 12 lines
tools/perf/builtin-c2c.c +4
-3+ mi->iaddr.sym ? mi->iaddr.sym->name : "???"); }static int perf_c2c__process_load_store (struct perf_c2c *c2c, +struct addr_location *al,struct perf_sample *sample, -struct addr_location *al) +struct perf_evsel *evsel) { -if (c2c->raw_records) -perf_sample__fprintf (sample,' ' ,"raw input" , al, stdout); +struct mem_info *mi;
tools/perf/builtin-c2c.c static int perf_c2c__fprintf_header(FILE *fp) · line 157
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+ + mi =sample__resolve_mem (sample, al); +if (!mi) +return -ENOMEM ; + +if (c2c->raw_records) { +perf_sample__fprintf (sample,' ' ,"raw input" , mi, stdout); +free (mi); +return 0 ; + }
It seems the 'mi' should be freed here as well?
Quoted 3 lines
return 0;
}
[SNIP]
tools/perf/builtin-c2c.c static int perf_c2c__process_sample(struct perf_tool *tool, · line 215
Quoted 4 lines
tools/perf/builtin-c2c.c +4
-0+static int perf_c2c__process_events (struct perf_session *session, +struct perf_c2c *c2c) +{ +int err =-1 ;
No need to set.
tools/perf/builtin-c2c.c static int perf_c2c__process_sample(struct perf_tool *tool, · line 220
Quoted 5 lines
tools/perf/builtin-c2c.c +5
-0+ + err =perf_session__process_events (session, &c2c->tool); +if (err) { +pr_err ("Failed to process count events, error %d\n" , err); + goto err;
Unnecessary goto.
Thanks,
Namhyung
Quoted 5 lines
tools/perf/builtin-c2c.c +1
-0} +err:return err; }
PATCH v3 6/15 perf, c2c: Add in new options to configure latency and stores
In reply to Don ZickusModified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
--- tools/perf/builtin-c2c.c | 73 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 7 deletions(-)
tools/perf/builtin-c2c.c +66 -7
@@ -6,6 +6,7 @@#include "util/session.h" #include "util/tool.h" #include "util/debug.h" +#include <api/fs/fs.h> #include <linux/compiler.h> #include <linux/kernel.h>
@@ -17,6 +18,12 @@ struct perf_c2c {enum {OP ,LVL ,SNP ,LCK ,TLB }; +#define DEFAULT_LATENCY_THRES 30 +#define DEFAULT_PRECISION 1 +static int lat_level =DEFAULT_LATENCY_THRES ; +static int prec_level =DEFAULT_PRECISION ; +static bool no_stores = false; +static int perf_c2c__scnprintf_data_src (char *bf,size_t size,uint64_t val) {#define PREFIX "["
@@ -159,9 +166,10 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,return 0 ; } +/* setup the basic events for most coverage, options added later */ static const struct perf_evsel_str_handler handlers[] = { - {"cpu/mem-loads,ldlat=30/pp" , perf_c2c__process_load_store, }, - {"cpu/mem-stores/pp" , perf_c2c__process_load_store, }, + {"cpu/mem-loads" , perf_c2c__process_load_store, }, + {"cpu/mem-stores" , perf_c2c__process_load_store, }, }; typedef int (*sample_handler)(struct perf_c2c *c2c,
@@ -246,7 +254,8 @@ static int perf_c2c__read_events(struct perf_c2c *c2c)unsigned int i;for (i =0 ; i <ARRAY_SIZE (handlers); i++) { -if (!strcmp (name, handlers[i].name)) +if (!strncmp (name, handlers[i].name, +sizeof (handlers[i].name))) evsel->handler = handlers[i].handler; } }
@@ -269,7 +278,7 @@ static int perf_c2c__report(struct perf_c2c *c2c)static int perf_c2c__record (int argc,const char **argv) { -unsigned int rec_argc, i, j; +unsigned int rec_argc, i, j, n;const char **rec_argv;const char *const record_args[] = {"record" ,
@@ -277,8 +286,21 @@ static int perf_c2c__record(int argc, const char **argv)"-d" , "-a", }; +char lat[16 ], prec[4 ] ="/" ; +char buf[256 ]; + +snprintf (lat,sizeof (lat),"ldlat=%d" , lat_level); + +if (prec_level >3 ) + prec_level =3 ; + +for (i =0 ; i < (unsigned int )prec_level; i++) + prec[i+1 ] ='p' ; + +/* how many events to pass in */ + n = (no_stores) ?1 :2 ; - rec_argc =ARRAY_SIZE (record_args) +2 *ARRAY_SIZE (handlers) + argc -1 ; + rec_argc =ARRAY_SIZE (record_args) +2 * n + argc -1 ; rec_argv =calloc (rec_argc +1 ,sizeof (char *));if (rec_argv ==NULL )
@@ -287,9 +309,16 @@ static int perf_c2c__record(int argc, const char **argv)for (i =0 ; i <ARRAY_SIZE (record_args); i++) rec_argv[i] =strdup (record_args[i]); -for (j =0 ; j <ARRAY_SIZE (handlers); j++) { +/* mem-loads is first index */ +snprintf (buf,sizeof (buf),"%s,%s%s" , handlers[0 ].name, lat, prec); + rec_argv[i++] =strdup ("-e" ); + rec_argv[i++] =strdup (buf); + +if (!no_stores) { +/* mem-stores is second index */ rec_argv[i++] =strdup ("-e" ); - rec_argv[i++] =strdup (handlers[j].name); +snprintf (buf,sizeof (buf),"%s%s" , handlers[1 ].name, prec); + rec_argv[i++] =strdup (buf); }for (j =1 ; j < (unsigned int )argc; j++, i++)
@@ -300,6 +329,30 @@ static int perf_c2c__record(int argc, const char **argv)return cmd_record (i, rec_argv,NULL ); } +static int +opt_no_stores_cb (const struct option *opt__maybe_unused ,const char *arg__maybe_unused ,int unset) +{ +int ret; + +if (unset) { +struct stat st; +char path[PATH_MAX ]; + +snprintf (path,PATH_MAX ,"%s/bus/event_source/devices/cpu/events/mem-stores" , +sysfs__mountpoint ()); + + ret =stat (path, &st); +if (ret) { +pr_debug ("Omitting mem-stores event" ); + no_stores = true; + } +return 0 ; + } + + no_stores = true; +return 0 ; +} +int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) {struct perf_c2c c2c = {
@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ), +OPT_CALLBACK_NOOPT (0 ,"no-stores" , &no_stores,"" , +"do not record stores" , &opt_no_stores_cb),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose (show counter open errors, etc)" ), OPT_STRING('i', "input", &input_name, "file",
Signature · 1 line
1.7.11.7
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
Quoted 7 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
Signed-off-by Don Zickus <[email protected]>---
SNIP
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),
could we get also option for user space modifier?
I needed to hack it in for my tests ;-)
thanks,
jirka
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
Quoted 11 lines · Jiri Olsa
Quoted 7 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
Signed-off-by Don Zickus <[email protected]>---
SNIP
Quoted 10 lines
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),could we get also option for user space modifier?
You mean the 'u' modifier, ie cpu/mem-loads/u ? If so, then I can do that but will that work with the -a option (which is hardcoded in the c2c tool [system-wide mode])?
Quoted 4 lines
I needed to hack it in for my tests ;-)
thanks,
jirka
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
Quoted 23 lines · Don Zickus
Quoted 11 lines · Jiri Olsa
Quoted 7 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
Signed-off-by Don Zickus <[email protected]>---
SNIP
Quoted 10 lines
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),could we get also option for user space modifier?
Quoted 3 lines
You mean the 'u' modifier, ie cpu/mem-loads/u ? If so, then I can do that but will that work with the -a option (which is hardcoded in the c2c tool [system-wide mode])?
right, forgot about that.. could the -a option be optional as well? probably the same way as for record would be the best:
perf c2c record ./foo # workload specific
perf c2c record -a sleep 3 # system wide
jirka
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
Quoted 28 lines · Jiri Olsa
Quoted 23 lines · Don Zickus
Quoted 11 lines · Jiri Olsa
Quoted 7 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
Signed-off-by Don Zickus <[email protected]>---
SNIP
Quoted 10 lines
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),could we get also option for user space modifier?
Quoted 3 lines
You mean the 'u' modifier, ie cpu/mem-loads/u ? If so, then I can do that but will that work with the -a option (which is hardcoded in the c2c tool [system-wide mode])?
Quoted 5 lines
right, forgot about that.. could the -a option be optional as well? probably the same way as for record would be the best:
perf c2c record ./foo # workload specific
perf c2c record -a sleep 3 # system wide
I understand what you are saying, but our tool was written to find cache contention across the system, so -a is usually implied. Most of our profiling is done system-wide. I would rather implement the opposite option --no-system-wide, if that is ok.
Cheers,
Don
Namhyung Kim
maintainerRe: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
Quoted 21 lines · Don Zickus
Quoted 20 lines · Jiri Olsa
Quoted 12 lines · Don Zickus
Quoted 10 lines · Jiri Olsa
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),could we get also option for user space modifier?
Quoted 3 lines
You mean the 'u' modifier, ie cpu/mem-loads/u ? If so, then I can do that but will that work with the -a option (which is hardcoded in the c2c tool [system-wide mode])?
right, forgot about that.. could the -a option be optional as well? probably the same way as for record would be the best:
Quoted 6 lines
Quoted 2 lines
perf c2c record ./foo # workload specific
perf c2c record -a sleep 3 # system wideI understand what you are saying, but our tool was written to find cache contention across the system, so -a is usually implied. Most of our profiling is done system-wide.
Hmm.. any chance it can be used for non-system-wide analysis? I think tool should provide a way to do it if it's a valid usecase. And adding -a option when recording doesn't look too hard. :)
Quoted 2 lines
I would rather implement the opposite option --no-system-wide, if that is ok.
Please just add -a/--system-wide (maybe use can make it default if no argument/workload is given like perf top does) then tool will provide the --no-* option automatically.
Thanks,
Namhyung
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
In reply to Jiri OlsaHi Jiri,
Quoted 24 lines · Jiri Olsa
Quoted 23 lines · Don Zickus
Quoted 21 lines · Jiri Olsa
Quoted 7 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
Signed-off-by Don Zickus <[email protected]>---
SNIP
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 8 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),could we get also option for user space modifier?
Quoted 5 lines
Quoted 3 lines
You mean the 'u' modifier, ie cpu/mem-loads/u ? If so, then I can do that but will that work with the -a option (which is hardcoded in the c2c tool [system-wide mode])?
right, forgot about that..
Why? I think the -a option behavior is orthogonal to the user/kernel modifier behavior, no? Do the mem-loads/stores events have any restriction on that?
Quoted 5 lines
could the -a option be optional as well? probably the same way as for record would be the best:
perf c2c record ./foo # workload specific
perf c2c record -a sleep 3 # system wide
Agreed.
Thanks,
Namhyung
Re: [PATCH 06/15 V3] perf, c2c: Add in new options to configure latency and stores
In reply to Don ZickusQuoted 5 lines · Don Zickus
Modified the code to allow latency settings to be tweaked on the command line and also the ability to dynamically profile stores (or disable using stores).
This allows the tool to be used on older Intel platforms like Westmere.
[SNIP]
Quoted 4 lines
tools/perf/builtin-c2c.c +0
-0@@ -277,8 +286,21 @@ static int perf_c2c__record(int argc, const char **argv)"-d" , "-a", };
tools/perf/builtin-c2c.c static int perf_c2c__record(int argc, const char **argv) · line 298
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+char lat[16 ], prec[4 ] ="/" ; +char buf[256 ]; + +snprintf (lat,sizeof (lat),"ldlat=%d" , lat_level); + +if (prec_level >3 ) + prec_level =3 ; + +for (i =0 ; i < (unsigned int )prec_level; i++) + prec[i+1 ] ='p' ;
Hmm.. it seems that negative prec_level can be a problem here - how about making it unsigned? Also the 'prec' is not null-terminated and needs to be increased to 5 to accept max level 3 ('/' + 'ppp' + '\0').
Quoted 60 lines
tools/perf/builtin-c2c.c +37
-3+ +/* how many events to pass in */ + n = (no_stores) ?1 :2 ; - rec_argc =ARRAY_SIZE (record_args) +2 *ARRAY_SIZE (handlers) + argc -1 ; + rec_argc =ARRAY_SIZE (record_args) +2 * n + argc -1 ; rec_argv =calloc (rec_argc +1 ,sizeof (char *));if (rec_argv ==NULL )@@ -287,9 +309,16 @@ static int perf_c2c__record(int argc, const char **argv)for (i =0 ; i <ARRAY_SIZE (record_args); i++) rec_argv[i] =strdup (record_args[i]); -for (j =0 ; j <ARRAY_SIZE (handlers); j++) { +/* mem-loads is first index */ +snprintf (buf,sizeof (buf),"%s,%s%s" , handlers[0 ].name, lat, prec); + rec_argv[i++] =strdup ("-e" ); + rec_argv[i++] =strdup (buf); + +if (!no_stores) { +/* mem-stores is second index */ rec_argv[i++] =strdup ("-e" ); - rec_argv[i++] =strdup (handlers[j].name); +snprintf (buf,sizeof (buf),"%s%s" , handlers[1 ].name, prec); + rec_argv[i++] =strdup (buf); }for (j =1 ; j < (unsigned int )argc; j++, i++)@@ -300,6 +329,30 @@ static int perf_c2c__record(int argc, const char **argv)return cmd_record (i, rec_argv,NULL ); } +static int +opt_no_stores_cb (const struct option *opt__maybe_unused ,const char *arg__maybe_unused ,int unset) +{ +int ret; + +if (unset) { +struct stat st; +char path[PATH_MAX ]; + +snprintf (path,PATH_MAX ,"%s/bus/event_source/devices/cpu/events/mem-stores" , +sysfs__mountpoint ()); + + ret =stat (path, &st); +if (ret) { +pr_debug ("Omitting mem-stores event" ); + no_stores = true; + } +return 0 ; + } + + no_stores = true; +return 0 ; +} +int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) {struct perf_c2c c2c = {
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 375
Quoted 7 lines
tools/perf/builtin-c2c.c +4
-0@@ -316,6 +369,12 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) };const struct option c2c_options[] = {OPT_BOOLEAN ('r' ,"raw_records" , &c2c.raw_records,"dump raw events" ), +OPT_INTEGER ('l' ,"latency-level" , &lat_level, +"specify the latency threshold for loads [default=30]" ), +OPT_INTEGER ('p' ,"precision-level" , &prec_level, +"specify the precision level of events (0,1,2,3) [default=1]" ),
Please use OPT_UINTEGER as I said above.
tools/perf/builtin-c2c.c int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) · line 377
Quoted 2 lines
tools/perf/builtin-c2c.c +2
-0+OPT_CALLBACK_NOOPT (0 ,"no-stores" , &no_stores,"" , + "do not record stores", &opt_no_stores_cb),
Why not using just plain "stores" boolean option - it'd also provide the "--no-stores" option - and checking availability of "mem-stores" events before starting record separately? Negation is always confusing.. (at least for me ;-p).
Thanks,
Namhyung
Quoted 3 lines
tools/perf/builtin-c2c.c +0
-0OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose (show counter open errors, etc)" ), OPT_STRING('i', "input", &input_name, "file",
PATCH v3 7/15 perf, c2c: Add in sort on physid
In reply to Don ZickusNow that the infrastructure is set, add in the support to use hist_entry to sort on physid.
V2: use new mmap2 sort
--- tools/perf/builtin-c2c.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)
tools/perf/builtin-c2c.c +51 -1
@@ -7,6 +7,7 @@#include "util/tool.h" #include "util/debug.h" #include <api/fs/fs.h> +#include "util/annotate.h" #include <linux/compiler.h> #include <linux/kernel.h>
@@ -14,6 +15,7 @@struct perf_c2c {struct perf_tool tool;bool raw_records; +struct hists hists; };enum {OP ,LVL ,SNP ,LCK ,TLB };
@@ -151,7 +153,11 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,struct perf_sample *sample, struct perf_evsel *evsel) { + struct symbol *parent = NULL; +struct hist_entry *he;struct mem_info *mi; +uint64_t cost; +int err; mi =sample__resolve_mem (sample, al);if (!mi)
@@ -163,7 +169,33 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,return 0 ; } -return 0 ; + cost = sample->weight; +if (!cost) + cost =1 ; + +/* +* must pass period=weight in order to get the correct +* sorting from hists__collapse_resort() which is solely +* based on periods. We want sorting be done on nr_events * weight +* and this is indirectly achieved by passing period=weight here +* and the he_stat__add_period() function. +*/ + he =__hists__add_entry (&c2c->hists, al, parent,NULL , mi, + cost, cost,0 ); +if (!he) { + err = -ENOMEM ; + goto out_mem; + } + + c2c->hists.stats.total_period += cost; +hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE ); +return err; + +out_mem: +/* implicitly freed by __hists__add_entry */ +free (mi); +out: +return err; }/* setup the basic events for most coverage, options added later */
@@ -266,10 +298,28 @@ out:return err; } +static int perf_c2c__init (struct perf_c2c *c2c) +{ + sort__mode =SORT_MODE__PHYSID ; + sort__wants_unique =1 ; + sort_order ="daddr,iaddr,pid,tid" ; + +if (setup_sorting () <0 ) { +pr_err ("can not setup sorting\n" ); +return -1 ; + } + +hists__init (&c2c->hists); + +return 0 ; +}static int perf_c2c__report (struct perf_c2c *c2c) {setup_pager (); +if (perf_c2c__init (c2c)) +return -1 ; +if (c2c->raw_records)perf_c2c__fprintf_header (stdout);
Signature · 1 line
1.7.11.7
Re: [PATCH 07/15 V3] perf, c2c: Add in sort on physid
Quoted 15 lines · Don Zickus
Now that the infrastructure is set, add in the support to use
hist_entryto sort on physid.V2: use new mmap2 sort
Signed-off-by Don Zickus <[email protected]>--- tools/perf/builtin-c2c.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)tools/perf/builtin-c2c.c +0
-0
tools/perf/builtin-c2c.c line 10
Quoted 4 lines
tools/perf/builtin-c2c.c +1
-0@@ -7,6 +7,7 @@#include "util/tool.h" #include "util/debug.h" #include <api/fs/fs.h> +#include "util/annotate.h"
Why is this #include needed?
[SNIP]
Quoted 21 lines
tools/perf/builtin-c2c.c +16
-1@@ -163,7 +169,33 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,return 0 ; } -return 0 ; + cost = sample->weight; +if (!cost) + cost =1 ; + +/* +* must pass period=weight in order to get the correct +* sorting from hists__collapse_resort() which is solely +* based on periods. We want sorting be done on nr_events * weight +* and this is indirectly achieved by passing period=weight here +* and the he_stat__add_period() function. +*/ + he =__hists__add_entry (&c2c->hists, al, parent,NULL , mi, + cost, cost,0 ); +if (!he) { + err = -ENOMEM ; + goto out_mem;
tools/perf/builtin-c2c.c static int perf_c2c__process_load_store(struct perf_c2c *c2c, · line 197
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+ } + + c2c->hists.stats.total_period += cost; +hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE ); +return err; + +out_mem: +/* implicitly freed by __hists__add_entry */ +free (mi); +out:
It seems this 'out' lable is not used anywhere..
tools/perf/builtin-c2c.c out: · line 305
Quoted 13 lines
tools/perf/builtin-c2c.c +6
-0+return err; }/* setup the basic events for most coverage, options added later */ @@ -266,10 +298,28 @@ out:return err; } +static int perf_c2c__init (struct perf_c2c *c2c) +{ + sort__mode =SORT_MODE__PHYSID ; + sort__wants_unique =1 ; + sort_order ="daddr,iaddr,pid,tid" ;
Where are the SORT_MODE__PHYSID, sort__wants_unique and "daddr", "iaddr" sort keys defined?
Also, more importantly, I think the sort order should contain at least "mem" and "snoop" keys to group samples based on the exact hitm information.
In my understanding, if two samples are captured at exactly same position with a same data access but different hitm info, they cannot be classified and just use the hitm info of first entry.
Thanks,
Namhyung
Quoted 19 lines
tools/perf/builtin-c2c.c +13
-0+ +if (setup_sorting () <0 ) { +pr_err ("can not setup sorting\n" ); +return -1 ; + } + +hists__init (&c2c->hists); + +return 0 ; +}static int perf_c2c__report (struct perf_c2c *c2c) {setup_pager (); +if (perf_c2c__init (c2c)) +return -1 ; +if (c2c->raw_records)perf_c2c__fprintf_header (stdout);
Re: [PATCH 07/15 V3] perf, c2c: Add in sort on physid
Quoted 68 lines · Namhyung Kim
Quoted 15 lines · Don Zickus
Now that the infrastructure is set, add in the support to use
hist_entryto sort on physid.V2: use new mmap2 sort
Signed-off-by Don Zickus <[email protected]>--- tools/perf/builtin-c2c.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)tools/perf/builtin-c2c.c +0
-0tools/perf/builtin-c2c.c line 10
Quoted 4 lines
tools/perf/builtin-c2c.c +1
-0@@ -7,6 +7,7 @@#include "util/tool.h" #include "util/debug.h" #include <api/fs/fs.h> +#include "util/annotate.h" Why is this #include needed?
[SNIP]
Quoted 21 lines
tools/perf/builtin-c2c.c +16
-1@@ -163,7 +169,33 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,return 0 ; } -return 0 ; + cost = sample->weight; +if (!cost) + cost =1 ; + +/* +* must pass period=weight in order to get the correct +* sorting from hists__collapse_resort() which is solely +* based on periods. We want sorting be done on nr_events * weight +* and this is indirectly achieved by passing period=weight here +* and the he_stat__add_period() function. +*/ + he =__hists__add_entry (&c2c->hists, al, parent,NULL , mi, + cost, cost,0 ); +if (!he) { + err = -ENOMEM ; + goto out_mem;tools/perf/builtin-c2c.c static int perf_c2c__process_load_store(struct perf_c2c *c2c, · line 197
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+ } + + c2c->hists.stats.total_period += cost; +hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE ); +return err; + +out_mem: +/* implicitly freed by __hists__add_entry */ +free (mi); +out:It seems this 'out' lable is not used anywhere..
Quoted 8 lines
tools/perf/builtin-c2c.c +1
-0+return err; }/* setup the basic events for most coverage, options added later */ @@ -266,10 +298,28 @@ out:return err; }
Quoted 8 lines
tools/perf/builtin-c2c.c out: · line 305
Quoted 5 lines
tools/perf/builtin-c2c.c +5
-0+static int perf_c2c__init (struct perf_c2c *c2c) +{ + sort__mode =SORT_MODE__PHYSID ; + sort__wants_unique =1 ; + sort_order ="daddr,iaddr,pid,tid" ;Where are the
SORT_MODE__PHYSID,sort__wants_uniqueand "daddr", "iaddr" sort keys defined?
In a previous patchset that enables the mmap2 interface.
Quoted 4 lines
Also, more importantly, I think the sort order should contain at least "mem" and "snoop" keys to group samples based on the exact hitm information.
I can look into it, but after iaddr, pid and tid, sorting on snoop doesn't really change anything if I recall. The hitms are scattered across iaddr.
Quoted 4 lines
In my understanding, if two samples are captured at exactly same position with a same data access but different hitm info, they cannot be classified and just use the hitm info of first entry.
Why? If the first hitm access was local and the second one remote, doesn't that indicate the accessed data is being pulled onto different nodes?
Cheers,
Don
Namhyung Kim
maintainerRe: [PATCH 07/15 V3] perf, c2c: Add in sort on physid
Quoted 11 lines · Don Zickus
Quoted 9 lines · Namhyung Kim
tools/perf/builtin-c2c.c out: · line 305
Quoted 5 lines · Don Zickus
tools/perf/builtin-c2c.c +5
-0+static int perf_c2c__init (struct perf_c2c *c2c) +{ + sort__mode =SORT_MODE__PHYSID ; + sort__wants_unique =1 ; + sort_order ="daddr,iaddr,pid,tid" ;Where are the
SORT_MODE__PHYSID,sort__wants_uniqueand "daddr", "iaddr" sort keys defined?
Quoted 1 line
In a previous patchset that enables the mmap2 interface.
Ah, missed that.. will look at it soon.
Quoted 8 lines
Quoted 5 lines
Also, more importantly, I think the sort order should contain at least "mem" and "snoop" keys to group samples based on the exact hitm information.
I can look into it, but after iaddr, pid and tid, sorting on snoop doesn't really change anything if I recall. The hitms are scattered across iaddr.
But it doesn't guarantee that all hitms are scattered, right? Also if it's the case I guess adding more sort keys are not harmful since they don't even have a chance to test.
I think you can check hist_entry->stat.nr_events always being 1.
Quoted 9 lines
Quoted 5 lines
In my understanding, if two samples are captured at exactly same position with a same data access but different hitm info, they cannot be classified and just use the hitm info of first entry.
Why? If the first hitm access was local and the second one remote, doesn't that indicate the accessed data is being pulled onto different nodes?
But "hist_entry" won't have the information after calling __hists__add__entry() called unless it has 'mem' and 'snoop' sort keys. Since two samples have same daddr, iaddr, pid and tid, it'd think those two samples are same and then add stats of second one to the first and finally discard the second. So first one will have a double weight for the local hitm case only.
This is the case what I worry about. Am I missing something?
Thanks,
Namhyung
Re: [PATCH 07/15 V3] perf, c2c: Add in sort on physid
Quoted 41 lines · Namhyung Kim
Quoted 11 lines · Don Zickus
Quoted 9 lines · Namhyung Kim
tools/perf/builtin-c2c.c out: · line 305
Quoted 5 lines · Don Zickus
tools/perf/builtin-c2c.c +5
-0+static int perf_c2c__init (struct perf_c2c *c2c) +{ + sort__mode =SORT_MODE__PHYSID ; + sort__wants_unique =1 ; + sort_order ="daddr,iaddr,pid,tid" ;Where are the
SORT_MODE__PHYSID,sort__wants_uniqueand "daddr", "iaddr" sort keys defined?Quoted 1 line
In a previous patchset that enables the mmap2 interface.
Ah, missed that.. will look at it soon.
Quoted 8 lines
Quoted 5 lines
Also, more importantly, I think the sort order should contain at least "mem" and "snoop" keys to group samples based on the exact hitm information.
I can look into it, but after iaddr, pid and tid, sorting on snoop doesn't really change anything if I recall. The hitms are scattered across iaddr.
But it doesn't guarantee that all hitms are scattered, right? Also if it's the case I guess adding more sort keys are not harmful since they don't even have a chance to test.
I think you can check
hist_entry->stat.nr_eventsalways being 1.Quoted 9 lines
Quoted 5 lines
In my understanding, if two samples are captured at exactly same position with a same data access but different hitm info, they cannot be classified and just use the hitm info of first entry.
Why? If the first hitm access was local and the second one remote, doesn't that indicate the accessed data is being pulled onto different nodes?
Quoted 8 lines
But "
hist_entry" won't have the information after calling__hists__add__entry()called unless it has 'mem' and 'snoop' sort keys. Since two samples have same daddr, iaddr, pid and tid, it'd think those two samples are same and then add stats of second one to the first and finally discard the second. So first one will have a double weight for the local hitm case only.This is the case what I worry about. Am I missing something?
My patch 6/6 of the enable mmap2 support. :-) It specifically forces all the data to remain separate to avoid this issue. We couldn't have the data merged because it messed up our stats.
Cheers,
Don
PATCH v3 8/15 perf, c2c: Add stats to track data source bits and cpu to node maps
In reply to Don ZickusThis patch adds a bunch of stats that will be used later in post-processing to determine where and with what frequency the HITMs are coming from.
Most of the stats are decoded from the data source response. Another piece of the stats is tracking which cpu the record came in on.
Credit to Dick Fowles for determining which bits are important and how to properly track them. Ported to perf by me.
V2: refresh with hist_entry
--- tools/perf/builtin-c2c.c | 187 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+)
tools/perf/builtin-c2c.c +187 -0
@@ -5,17 +5,58 @@#include "util/parse-options.h" #include "util/session.h" #include "util/tool.h" +#include "util/stat.h" +#include "util/cpumap.h" #include "util/debug.h" #include <api/fs/fs.h> #include "util/annotate.h" #include <linux/compiler.h> #include <linux/kernel.h> +#include <sched.h> + +typedef struct { +int locks;/* count of 'lock' transactions */ +int store;/* count of all stores in trace */ +int st_uncache;/* stores to uncacheable address */ +int st_noadrs;/* cacheable store with no address */ +int st_l1hit;/* count of stores that hit L1D */ +int st_l1miss;/* count of stores that miss L1D */ +int load;/* count of all loads in trace */ +int ld_excl;/* exclusive loads, rmt/lcl DRAM - snp none/miss */ +int ld_shared;/* shared loads, rmt/lcl DRAM - snp hit */ +int ld_uncache;/* loads to uncacheable address */ +int ld_io;/* loads to io address */ +int ld_miss;/* loads miss */ +int ld_noadrs;/* cacheable load with no address */ +int ld_fbhit;/* count of loads hitting Fill Buffer */ +int ld_l1hit;/* count of loads that hit L1D */ +int ld_l2hit;/* count of loads that hit L2D */ +int ld_llchit;/* count of loads that hit LLC */ +int lcl_hitm;/* count of loads with local HITM */ +int rmt_hitm;/* count of loads with remote HITM */ +int rmt_hit;/* count of loads with remote hit clean; */ +int lcl_dram;/* count of loads miss to local DRAM */ +int rmt_dram;/* count of loads miss to remote DRAM */ +int nomap;/* count of load/stores with no phys adrs */ +int noparse;/* count of unparsable data sources */ +}trinfo_t ; + +struct c2c_stats { +cpu_set_t cpuset; +int nr_entries; +u64 total_period; +trinfo_t t; +struct stats stats; +};struct perf_c2c {struct perf_tool tool;bool raw_records;struct hists hists; + +/* stats */ +struct c2c_stats stats; };enum {OP ,LVL ,SNP ,LCK ,TLB };
@@ -26,6 +67,29 @@ static int lat_level = DEFAULT_LATENCY_THRES;static int prec_level =DEFAULT_PRECISION ;static bool no_stores = false; +#define RMT_RAM (PERF_MEM_LVL_REM_RAM1 | PERF_MEM_LVL_REM_RAM2) +#define RMT_LLC (PERF_MEM_LVL_REM_CCE1 | PERF_MEM_LVL_REM_CCE2) + +#define L1CACHE_HIT (a) (((a) & PERF_MEM_LVL_L1 ) && ((a) & PERF_MEM_LVL_HIT)) +#define FILLBUF_HIT (a) (((a) & PERF_MEM_LVL_LFB) && ((a) & PERF_MEM_LVL_HIT)) +#define L2CACHE_HIT (a) (((a) & PERF_MEM_LVL_L2 ) && ((a) & PERF_MEM_LVL_HIT)) +#define L3CACHE_HIT (a) (((a) & PERF_MEM_LVL_L3 ) && ((a) & PERF_MEM_LVL_HIT)) + +#define L1CACHE_MISS (a) (((a) & PERF_MEM_LVL_L1 ) && ((a) & PERF_MEM_LVL_MISS)) +#define L3CACHE_MISS (a) (((a) & PERF_MEM_LVL_L3 ) && ((a) & PERF_MEM_LVL_MISS)) + +#define LD_UNCACHED (a) (((a) & PERF_MEM_LVL_UNC) && ((a) & PERF_MEM_LVL_HIT)) +#define ST_UNCACHED (a) (((a) & PERF_MEM_LVL_UNC) && ((a) & PERF_MEM_LVL_HIT)) + +#define RMT_LLCHIT (a) (((a) & RMT_LLC) && ((a) & PERF_MEM_LVL_HIT)) +#define RMT_HIT (a,b) (((a) & RMT_LLC) && ((b) & PERF_MEM_SNOOP_HIT)) +#define RMT_HITM (a,b) (((a) & RMT_LLC) && ((b) & PERF_MEM_SNOOP_HITM)) +#define RMT_MEM (a) (((a) & RMT_RAM) && ((a) & PERF_MEM_LVL_HIT)) + +#define LCL_HIT (a,b) (L3CACHE_HIT(a) && ((b) & PERF_MEM_SNOOP_HIT)) +#define LCL_HITM (a,b) (L3CACHE_HIT(a) && ((b) & PERF_MEM_SNOOP_HITM)) +#define LCL_MEM (a) (((a) & PERF_MEM_LVL_LOC_RAM) && ((a) & PERF_MEM_LVL_HIT)) +static int perf_c2c__scnprintf_data_src (char *bf,size_t size,uint64_t val) {#define PREFIX "["
@@ -148,6 +212,109 @@ static int perf_sample__fprintf(struct perf_sample *sample, char tag, mi->iaddr.sym ? mi->iaddr.sym->name : "???"); } +static int c2c_decode_stats (struct c2c_stats *stats,struct hist_entry *entry) +{ +union perf_mem_data_src *data_src = &entry->mem_info->data_src; +u64 daddr = entry->mem_info->daddr.addr; +u64 weight = entry->stat.weight; +int err =0 ; + +u64 op = data_src->mem_op; +u64 lvl = data_src->mem_lvl; +u64 snoop = data_src->mem_snoop; +u64 lock = data_src->mem_lock; + +#define P (a,b) PERF_MEM_##a##_##b + + stats->nr_entries++; + stats->total_period += entry->stat.period; + +if (lock &P (LOCK ,LOCKED )) stats->t.locks++; + +if (op &P (OP ,LOAD )) { + stats->t.load++; + +if (!daddr) { + stats->t.ld_noadrs++; +return -1 ; + } + +if (lvl &P (LVL ,HIT )) { +if (lvl &P (LVL ,UNC )) stats->t.ld_uncache++; +if (lvl &P (LVL ,IO )) stats->t.ld_io++; +if (lvl &P (LVL ,LFB )) stats->t.ld_fbhit++; +if (lvl &P (LVL ,L1 )) stats->t.ld_l1hit++; +if (lvl &P (LVL ,L2 )) stats->t.ld_l2hit++; +if (lvl &P (LVL ,L3 )) { +if (snoop &P (SNOOP ,HITM )) + stats->t.lcl_hitm++; +else + stats->t.ld_llchit++; + } + +if (lvl &P (LVL ,LOC_RAM )) { + stats->t.lcl_dram++; +if (snoop &P (SNOOP ,HIT )) + stats->t.ld_shared++; +else + stats->t.ld_excl++; + } + +if ((lvl &P (LVL ,REM_RAM1 )) || + (lvl &P (LVL ,REM_RAM2 ))) { + stats->t.rmt_dram++; +if (snoop &P (SNOOP ,HIT )) + stats->t.ld_shared++; +else + stats->t.ld_excl++; + } + } + +if ((lvl &P (LVL ,REM_CCE1 )) || + (lvl &P (LVL ,REM_CCE2 ))) { +if (snoop &P (SNOOP ,HIT )) + stats->t.rmt_hit++; +else if (snoop &P (SNOOP ,HITM )) { + stats->t.rmt_hitm++; +update_stats (&stats->stats, weight); + } + } + +if ((lvl &P (LVL ,MISS ))) + stats->t.ld_miss++; + + }else if (op &P (OP ,STORE )) { +/* store */ + stats->t.store++; + +if (!daddr) { + stats->t.st_noadrs++; +return -1 ; + } + +if (lvl &P (LVL ,HIT )) { +if (lvl &P (LVL ,UNC )) stats->t.st_uncache++; +if (lvl &P (LVL ,L1 )) stats->t.st_l1hit++; + } +if (lvl &P (LVL ,MISS )) +if (lvl &P (LVL ,L1 )) stats->t.st_l1miss++; + }else { +/* unparsable data_src? */ + stats->t.noparse++; +return -1 ; + } + +if (!entry->mem_info->daddr.map || !entry->mem_info->iaddr.map) { + stats->t.nomap++; +pr_debug ("Dropping data 0x%lx (%p) and inst 0x%lx (%p)\n" , + entry->mem_info->daddr.addr, entry->mem_info->daddr.map, + entry->mem_info->iaddr.addr, entry->mem_info->iaddr.map); +return -1 ; + } + +return err; +} + static int perf_c2c__process_load_store(struct perf_c2c *c2c, struct addr_location *al, struct perf_sample *sample,
@@ -187,6 +354,14 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c, goto out_mem; } + err =c2c_decode_stats (&c2c->stats, he); +if (err <0 ) { + err =0 ; +rb_erase (&he->rb_node_in, c2c->hists.entries_in); +free (he); + goto out; + } + c2c->hists.stats.total_period += cost;hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE );return err;
@@ -280,6 +455,9 @@ static int perf_c2c__read_events(struct perf_c2c *c2c) goto out; } +if (symbol__init () <0 ) + goto out_delete; +/* setup the evsel handlers for each event type */ evlist__for_each (session->evlist, evsel) {const char *name =perf_evsel__name (evsel);
@@ -294,12 +472,20 @@ static int perf_c2c__read_events(struct perf_c2c *c2c) err =perf_c2c__process_events (session, c2c); +out_delete: +perf_session__delete (session); out:return err; }static int perf_c2c__init (struct perf_c2c *c2c) { +/* setup cpu map */ +if (cpu__setup_cpunode_map () <0 ) { +pr_err ("can not setup cpu map\n" ); +return -1 ; + } + sort__mode =SORT_MODE__PHYSID ; sort__wants_unique =1 ; sort_order ="daddr,iaddr,pid,tid" ;
@@ -310,6 +496,7 @@ static int perf_c2c__init(struct perf_c2c *c2c) }hists__init (&c2c->hists); +CPU_ZERO (&c2c->stats.cpuset);return 0 ; }
Signature · 1 line
1.7.11.7
Re: [PATCH 08/15 V3] perf, c2c: Add stats to track data source bits and cpu to node maps
Quoted 9 lines · Don Zickus
This patch adds a bunch of stats that will be used later in post-processing to determine where and with what frequency the HITMs are coming from.
Most of the stats are decoded from the data source response. Another piece of the stats is tracking which cpu the record came in on.
Credit to Dick Fowles for determining which bits are important and how to properly track them. Ported to perf by me.
tools/perf/builtin-c2c.c static int perf_c2c__process_load_store(struct perf_c2c *c2c, · line 361
Quoted 8 lines
tools/perf/builtin-c2c.c +5
-0@@ -187,6 +354,14 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c, goto out_mem; } + err =c2c_decode_stats (&c2c->stats, he); +if (err <0 ) { + err =0 ; +rb_erase (&he->rb_node_in, c2c->hists.entries_in); +free (he);
Please use hist_entry__free() to free he->mem_info also.
Thanks,
Namhyung
Quoted 6 lines
tools/perf/builtin-c2c.c +3
-0+ goto out; + } + c2c->hists.stats.total_period += cost;hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE );return err;
PATCH v3 9/15 perf, c2c: Sort based on hottest cache line
In reply to Don ZickusNow that we have all the events sort on a unique address, we can walk the rbtree sequential and count up all the HITMs for each cacheline fairly easily.
Once we encounter a new event on a different cacheline, process the previous cacheline. That includes determining if any HITMs were present on that cacheline and if so, add it to another rbtree sorted on the number of HITMs.
This second rbtree sorted on number of HITMs will be the interesting data we want to report and will be displayed in a follow up patch.
For now, organize the data properly.
V2: re-work using hist_entries
--- tools/perf/builtin-c2c.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+)
tools/perf/builtin-c2c.c +201 -0
@@ -59,6 +59,25 @@ struct perf_c2c {struct c2c_stats stats; }; +#define CACHE_LINESIZE 64 +#define CLINE_OFFSET_MSK (CACHE_LINESIZE - 1) +#define CLADRS (a) ((a) & ~(CLINE_OFFSET_MSK)) +#define CLOFFSET (a) (int)((a) & (CLINE_OFFSET_MSK)) + +struct c2c_hit { +struct rb_node rb_node; +struct rb_root tree; +struct list_head list; +u64 cacheline; +int color; +struct c2c_stats stats; +pid_t pid; +pid_t tid; +u64 daddr; +u64 iaddr; +struct mem_info *mi; +}; +enum {OP ,LVL ,SNP ,LCK ,TLB };#define DEFAULT_LATENCY_THRES 30
@@ -160,6 +179,44 @@ static int perf_c2c__scnprintf_data_src(char *bf, size_t size, uint64_t val)return printed; } +static int c2c_hitm__add_to_list (struct rb_root *root,struct c2c_hit *h) +{ +struct rb_node **p; +struct rb_node *parent =NULL ; +struct c2c_hit *he; +int64_t cmp; +u64 l_hitms, r_hitms; + + p = &root->rb_node; + +while (*p !=NULL ) { + parent = *p; + he = rb_entry(parent, struct c2c_hit, rb_node); + +/* sort on remote hitms first */ + l_hitms = he->stats.t.rmt_hitm; + r_hitms = h->stats.t.rmt_hitm; + cmp = r_hitms - l_hitms; + +if (!cmp) { +/* sort on local hitms */ + l_hitms = he->stats.t.lcl_hitm; + r_hitms = h->stats.t.lcl_hitm; + cmp = r_hitms - l_hitms; + } + +if (cmp >0 ) + p = &(*p)->rb_left; +else + p = &(*p)->rb_right; + } + +rb_link_node (&h->rb_node, parent, p); +rb_insert_color (&h->rb_node, root); + +return 0 ; +} +static int perf_c2c__fprintf_header (FILE *fp) { int printed = fprintf(fp, "%c %-16s %6s %6s %4s %18s %18s %18s %6s %-10s %-60s %s\n",
@@ -315,6 +372,50 @@ static int c2c_decode_stats(struct c2c_stats *stats, struct hist_entry *entry)return err; } +static struct c2c_hit *c2c_hit__new (u64 cacheline,struct hist_entry *entry) +{ +struct c2c_hit *h =zalloc (sizeof (struct c2c_hit )); + +if (!h) { +pr_err ("Could not allocate c2c_hit memory\n" ); +return NULL ; + } + +CPU_ZERO (&h->stats.cpuset); +INIT_LIST_HEAD (&h->list); +init_stats (&h->stats.stats); + h->tree =RB_ROOT ; + h->cacheline = cacheline; + h->pid = entry->thread->pid_; + h->tid = entry->thread->tid; + +/* use original addresses here, not adjusted al_addr */ + h->iaddr = entry->mem_info->iaddr.addr; + h->daddr = entry->mem_info->daddr.addr; + + h->mi = entry->mem_info; +return h; +} + +static void c2c_hit__update_strings (struct c2c_hit *h, +struct hist_entry *n) +{ +if (h->pid != n->thread->pid_) + h->pid =-1 ; + +if (h->tid != n->thread->tid) + h->tid =-1 ; + +/* use original addresses here, not adjusted al_addr */ +if (h->iaddr != n->mem_info->iaddr.addr) + h->iaddr =-1 ; + +if (CLADRS (h->daddr) !=CLADRS (n->mem_info->daddr.addr)) + h->daddr =-1 ; + +CPU_SET (n->cpu, &h->stats.cpuset); +} + static int perf_c2c__process_load_store(struct perf_c2c *c2c, struct addr_location *al, struct perf_sample *sample,
@@ -424,6 +525,104 @@ err:return err; } +#define HAS_HITMS (h) (h->stats.t.lcl_hitm || h->stats.t.rmt_hitm) + +static void c2c_hit__update_stats (struct c2c_stats *new, +struct c2c_stats *old) +{ + new->t.load += old->t.load; + new->t.ld_fbhit += old->t.ld_fbhit; + new->t.ld_l1hit += old->t.ld_l1hit; + new->t.ld_l2hit += old->t.ld_l2hit; + new->t.ld_llchit += old->t.ld_llchit; + new->t.locks += old->t.locks; + new->t.lcl_dram += old->t.lcl_dram; + new->t.rmt_dram += old->t.rmt_dram; + new->t.lcl_hitm += old->t.lcl_hitm; + new->t.rmt_hitm += old->t.rmt_hitm; + new->t.rmt_hit += old->t.rmt_hit; + new->t.store += old->t.store; + new->t.st_l1hit += old->t.st_l1hit; + + new->total_period += old->total_period; +} + +static inline int valid_hitm_or_store (union perf_mem_data_src *dsrc) +{ +return ((dsrc->mem_snoop &P (SNOOP ,HITM )) || + (dsrc->mem_op &P (OP ,STORE ))); +} + +static void c2c_analyze_hitms (struct perf_c2c *c2c) +{ + +struct rb_node *next =rb_first (c2c->hists.entries_in); +struct hist_entry *he; +struct c2c_hit *h =NULL ; +struct c2c_stats hitm_stats; +struct rb_root hitm_tree =RB_ROOT ; +int shared_clines =0 ; +u64 cl =0 ; + +memset (&hitm_stats,0 ,sizeof (struct c2c_stats )); + +/* find HITMs */ +while (next) { + he = rb_entry(next, struct hist_entry, rb_node_in); + next =rb_next (&he->rb_node_in); + + cl = he->mem_info->daddr.al_addr; + +/* switch cache line objects */ +/* 'color' forces a boundary change based on the original sort */ +if (!h || !he->color || (CLADRS (cl) != h->cacheline)) { +if (h &&HAS_HITMS (h)) { +c2c_hit__update_stats (&hitm_stats, &h->stats); + +/* sort based on hottest cacheline */ +c2c_hitm__add_to_list (&hitm_tree, h); + shared_clines++; + }else { +/* stores-only are un-interesting */ +free (h); + } + h =c2c_hit__new (CLADRS (cl), he); +if (!h) + goto cleanup; + } + + +c2c_decode_stats (&h->stats, he); + +/* filter out non-hitms as un-interesting noise */ +if (valid_hitm_or_store (&he->mem_info->data_src)) { +/* save the entry for later processing */ +list_add_tail (&he->pairs.node, &h->list); + +c2c_hit__update_strings (h, he); + } + } + +/* last chunk */ +if (h &&HAS_HITMS (h)) { +c2c_hit__update_stats (&hitm_stats, &h->stats); +c2c_hitm__add_to_list (&hitm_tree, h); + shared_clines++; + }else +free (h); + +cleanup: + next =rb_first (&hitm_tree); +while (next) { + h = rb_entry(next, struct c2c_hit, rb_node); + next =rb_next (&h->rb_node); +rb_erase (&h->rb_node, &hitm_tree); + +free (h); + } +return ; +} +static int perf_c2c__process_events (struct perf_session *session,struct perf_c2c *c2c) {
@@ -435,6 +634,8 @@ static int perf_c2c__process_events(struct perf_session *session, goto err; } +c2c_analyze_hitms (c2c); + err:return err; }
Signature · 1 line
1.7.11.7
Re: [PATCH 09/15 V3] perf, c2c: Sort based on hottest cache line
Quoted 4 lines · Don Zickus
Now that we have all the events sort on a unique address, we can walk the rbtree sequential and count up all the HITMs for each cacheline fairly easily.
Quoted 8 lines
Once we encounter a new event on a different cacheline, process the previous cacheline. That includes determining if any HITMs were present on that cacheline and if so, add it to another rbtree sorted on the number of HITMs.
This second rbtree sorted on number of HITMs will be the interesting data we want to report and will be displayed in a follow up patch.
For now, organize the data properly.
just a few minor nitpicks below..
Quoted 1 line
+static int
c2c_hitm__add_to_list(struct rb_root *root, struct c2c_hit *h)
Why does it have 'list' in the name while it's not a list? Maybe just using c2c_hit__add_entry() ?
Quoted 36 lines
tools/perf/builtin-c2c.c +36
-0+{ +struct rb_node **p; +struct rb_node *parent =NULL ; +struct c2c_hit *he; +int64_t cmp; +u64 l_hitms, r_hitms; + + p = &root->rb_node; + +while (*p !=NULL ) { + parent = *p; + he = rb_entry(parent, struct c2c_hit, rb_node); + +/* sort on remote hitms first */ + l_hitms = he->stats.t.rmt_hitm; + r_hitms = h->stats.t.rmt_hitm; + cmp = r_hitms - l_hitms; + +if (!cmp) { +/* sort on local hitms */ + l_hitms = he->stats.t.lcl_hitm; + r_hitms = h->stats.t.lcl_hitm; + cmp = r_hitms - l_hitms; + } + +if (cmp >0 ) + p = &(*p)->rb_left; +else + p = &(*p)->rb_right; + } + +rb_link_node (&h->rb_node, parent, p); +rb_insert_color (&h->rb_node, root); + +return 0 ; +}
[SNIP]
tools/perf/builtin-c2c.c static int c2c_decode_stats(struct c2c_stats *stats, struct hist_entry *entry) · line 401
Quoted 2 lines
tools/perf/builtin-c2c.c +2
-0+static void c2c_hit__update_strings (struct c2c_hit *h, +struct hist_entry *n)
This one also has nothing with any string IMHO.
Quoted 16 lines
tools/perf/builtin-c2c.c +16
-0+{ +if (h->pid != n->thread->pid_) + h->pid =-1 ; + +if (h->tid != n->thread->tid) + h->tid =-1 ; + +/* use original addresses here, not adjusted al_addr */ +if (h->iaddr != n->mem_info->iaddr.addr) + h->iaddr =-1 ; + +if (CLADRS (h->daddr) !=CLADRS (n->mem_info->daddr.addr)) + h->daddr =-1 ; + +CPU_SET (n->cpu, &h->stats.cpuset); +}
[SNIP]
tools/perf/builtin-c2c.c err: · line 564
Quoted 9 lines
tools/perf/builtin-c2c.c +9
-0+static void c2c_analyze_hitms (struct perf_c2c *c2c) +{ + +struct rb_node *next =rb_first (c2c->hists.entries_in); +struct hist_entry *he; +struct c2c_hit *h =NULL ; +struct c2c_stats hitm_stats; +struct rb_root hitm_tree =RB_ROOT ; +int shared_clines =0 ;
It seems the shared_clines is set but not used in this patch. Maybe it'd better moving it to a patch which use it actually.
Thanks,
Namhyung
Quoted 60 lines
tools/perf/builtin-c2c.c +60
-0+u64 cl =0 ; + +memset (&hitm_stats,0 ,sizeof (struct c2c_stats )); + +/* find HITMs */ +while (next) { + he = rb_entry(next, struct hist_entry, rb_node_in); + next =rb_next (&he->rb_node_in); + + cl = he->mem_info->daddr.al_addr; + +/* switch cache line objects */ +/* 'color' forces a boundary change based on the original sort */ +if (!h || !he->color || (CLADRS (cl) != h->cacheline)) { +if (h &&HAS_HITMS (h)) { +c2c_hit__update_stats (&hitm_stats, &h->stats); + +/* sort based on hottest cacheline */ +c2c_hitm__add_to_list (&hitm_tree, h); + shared_clines++; + }else { +/* stores-only are un-interesting */ +free (h); + } + h =c2c_hit__new (CLADRS (cl), he); +if (!h) + goto cleanup; + } + + +c2c_decode_stats (&h->stats, he); + +/* filter out non-hitms as un-interesting noise */ +if (valid_hitm_or_store (&he->mem_info->data_src)) { +/* save the entry for later processing */ +list_add_tail (&he->pairs.node, &h->list); + +c2c_hit__update_strings (h, he); + } + } + +/* last chunk */ +if (h &&HAS_HITMS (h)) { +c2c_hit__update_stats (&hitm_stats, &h->stats); +c2c_hitm__add_to_list (&hitm_tree, h); + shared_clines++; + }else +free (h); + +cleanup: + next =rb_first (&hitm_tree); +while (next) { + h = rb_entry(next, struct c2c_hit, rb_node); + next =rb_next (&h->rb_node); +rb_erase (&h->rb_node, &hitm_tree); + +free (h); + } +return ; +}
PATCH v3 10/15 perf, c2c: Display cacheline HITM analysis to stdout
In reply to Don ZickusThis patch mainly focuses on processing and displaying the collected HITMs to stdout. Most of it is just printing data in a pretty way.
There is one trick used when walking the cacheline. When we get this far we have two rbtrees. One rbtree holds every record sorted on a unique id (using the mmap2 decoder), the other rbtree holds every cacheline with at least one HITM sorted on number of HITMs.
To display the output, the tool walks the second rbtree to display the hottest cachelines. Inside each hot cacheline, the tool displays the offsets and the loads/stores it generates. To determine the cacheline offset, it uses linked list inside the cacheline elment to walk the first rbtree elements for that particular cacheline.
The first rbtree elements are already sorted correctly in offset order, so processing the offsets is fairly trivial and is done sequentially.
This is why you will see two while loops in the print_c2c_hitm_report(), the outer one walks the cachelines, the inner one walks the offsets.
A knob has been added to display node information, which is useful to see which cpus are involved in the contention and their nodes.
Another knob has been added to change the coalescing levels. You can coalesce the output based on pid, tid, ip, and/or symbol.
Original output and statistics done by Dick Fowles, backported by me.
Sample output:
=================================================
Global Shared Cache Line Event Information
=================================================
Total Shared Cache Lines : 1327 Load HITs on shared lines : 167131 Fill Buffer Hits on shared lines : 43469 L1D hits on shared lines : 50497 L2D hits on shared lines : 960 LLC hits on shared lines : 38467 Locked Access on shared lines : 100032 Store HITs on shared lines : 118659 Store L1D hits on shared lines : 113783 Total Merged records : 160807
===========================================================================================================================================================
Shared Cache Line Distribution Pareto
---- All ---- -- Shared -- ---- HITM ---- Load Inst Execute Latency
Data Misses Data Misses Remote Local -- Store Refs --
---- cycles ---- cpu
Num %dist %cumm %dist %cumm LLCmiss LLChit L1 hit L1 Miss Data Address Pid Tid Inst Address median mean CV cnt
==========================================================================================================================================================
-----------------------------------------------------------------------------------------------
0 17.0% 17.0% 23.3% 23.3% 6238 3288 28098 813 0xffff881fa55b0140 ***
-----------------------------------------------------------------------------------------------
0.0% 0.0% 0.0% 0.0% 0x00 375 375 0xffffffffa018ff5b n/a n/a n/a 1
0.0% 0.0% 0.0% 0.0% 0x08 18156 18156 0xffffffffa018b7f9 -1 384 0.0% 1
0.2% 0.0% 0.0% 0.0% 0x10 18156 18156 0xffffffff811ca1aa -1 387 10.7% 7
0.0% 0.0% 23.2% 0.0% 0x18 18156 18156 0xffffffff815c1615 -1 684 0.0% 50-----------------------------------------------------------------------------------------------
1 5.3% 22.3% 7.3% 30.6% 1944 1143 7916 0 0xffff881fba47f000 18156
-----------------------------------------------------------------------------------------------
100.0% 100.0% 0.0% 0.0% 0x00 18156 18156 0xffffffffa01b410e -1 401 13.5% 50
0.0% 0.0% 10.1% 0.0% 0x28 18156 18156 0xffffffffa0167409 n/a n/a n/a 50
0.0% 0.0% 89.9% 0.0% 0x28 18156 18156 0xffffffff815c4be9 n/a n/a n/a 50--- tools/perf/builtin-c2c.c | 519 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 519 insertions(+)
tools/perf/builtin-c2c.c +519 -0
@@ -59,10 +59,13 @@ struct perf_c2c {struct c2c_stats stats; }; +#define DISPLAY_LINE_LIMIT 0.0015#define CACHE_LINESIZE 64#define CLINE_OFFSET_MSK (CACHE_LINESIZE - 1)#define CLADRS (a) ((a) & ~(CLINE_OFFSET_MSK))#define CLOFFSET (a) (int)((a) & (CLINE_OFFSET_MSK)) +#define MAXTITLE_SZ 400 +#define MAXLBL_SZ 256struct c2c_hit {struct rb_node rb_node;
@@ -109,6 +112,11 @@ static bool no_stores = false;#define LCL_HITM (a,b) (L3CACHE_HIT(a) && ((b) & PERF_MEM_SNOOP_HITM))#define LCL_MEM (a) (((a) & PERF_MEM_LVL_LOC_RAM) && ((a) & PERF_MEM_LVL_HIT)) +enum {LVL0 ,LVL1 ,LVL2 ,LVL3 ,LVL4 ,MAX_LVL }; +static int cloffset =LVL1 ; +static int node_info =0 ; +static int coalesce_level =LVL1 ; +static int perf_c2c__scnprintf_data_src (char *bf,size_t size,uint64_t val) {#define PREFIX "["
@@ -416,6 +424,80 @@ static void c2c_hit__update_strings(struct c2c_hit *h,CPU_SET (n->cpu, &h->stats.cpuset); } +static inline bool matching_coalescing (struct c2c_hit *h, +struct hist_entry *e) +{ +bool value = false; +struct mem_info *mi = e->mem_info; + +if (coalesce_level >MAX_LVL ) +printf ("DON: bad coalesce level %d\n" , coalesce_level); + +if (e->cpumode !=PERF_RECORD_MISC_KERNEL ) { + +switch (coalesce_level) { + +case LVL0 : +case LVL1 : + value = ((h->daddr == mi->daddr.addr) && + (h->pid == e->thread->pid_) && + (h->tid == e->thread->tid) && + (h->iaddr == mi->iaddr.addr)); +break ; + +case LVL2 : + value = ((h->daddr == mi->daddr.addr) && + (h->pid == e->thread->pid_) && + (h->iaddr == mi->iaddr.addr)); +break ; + +case LVL3 : + value = ((h->daddr == mi->daddr.addr) && + (h->iaddr == mi->iaddr.addr)); +break ; + +case LVL4 : + value = ((h->daddr == mi->daddr.addr) && + (h->mi->iaddr.sym == mi->iaddr.sym)); +break ; + +default : +break ; + + } + + }else { + +switch (coalesce_level) { + +case LVL0 : + value = ((h->daddr == mi->daddr.addr) && + (h->pid == e->thread->pid_) && + (h->tid == e->thread->tid) && + (h->iaddr == mi->iaddr.addr)); +break ; + +case LVL1 : +case LVL2 : +case LVL3 : + value = ((h->daddr == mi->daddr.addr) && + (h->iaddr == mi->iaddr.addr)); +break ; + +case LVL4 : + value = ((h->daddr == mi->daddr.addr) && + (h->mi->iaddr.sym == mi->iaddr.sym)); +break ; + +default : +break ; + + } + } + +return value; +} + static int perf_c2c__process_load_store(struct perf_c2c *c2c, struct addr_location *al, struct perf_sample *sample,
@@ -547,12 +629,442 @@ static void c2c_hit__update_stats(struct c2c_stats *new, new->total_period += old->total_period; } +static void print_hitm_cacheline_header (void ) +{ +#define SHARING_REPORT_TITLE "Shared Cache Line Distribution Pareto" +#define PARTICIPANTS1 "Node{cpus %hitms %stores} Node{cpus %hitms %stores} ..." +#define PARTICIPANTS2 "Node{cpu list}; Node{cpu list}; Node{cpu list}; ..." + +int i; +const char *docptr; +static char delimit[MAXTITLE_SZ ]; +static char title2[MAXTITLE_SZ ]; +int pad; + + docptr =" " ; +if (node_info ==1 ) + docptr =PARTICIPANTS1 ; +if (node_info ==2 ) + docptr =PARTICIPANTS2 ; + +sprintf (title2,"%4s %6s %6s %6s %6s %8s %8s %8s %8s %18s %6s %6s %18s %8s %8s %8s %6s %-30s %-20s %s" , +"Num" , +"%dist" , +"%cumm" , +"%dist" , +"%cumm" , +"LLCmiss" , +"LLChit" , +"L1 hit" , +"L1 Miss" , +"Data Address" , +"Pid" , +"Tid" , +"Inst Address" , +"median" , +"mean" , +"CV " , +"cnt" , +"Symbol" , +"Object" , + docptr); + +for (i =0 ; i < (int )strlen (title2); i++)strcat (delimit,"=" ); + + +printf ("\n\n" ); +printf ("%s\n" , delimit); +printf ("\n" ); + + pad = (strlen (title2)/2 ) - (strlen (SHARING_REPORT_TITLE )/2 ); +for (i =0 ; i < pad; i++)printf (" " ); +printf ("%s\n" ,SHARING_REPORT_TITLE ); + +printf ("\n" ); +printf ("%4s %13s %13s %17s %8s %8s %18s %6s %6s %18s %26s %6s %30s %20s %s\n" , +" " , +"---- All ----" , +"-- Shared --" , +"---- HITM ----" , +" " , +" " , +" " , +" " , +" " , +" " , +"Load Inst Execute Latency" , +" " , +" " , +" " , + node_info ?"Shared Data Participants" :" " ); + + +printf ("%4s %13s %13s %8s %8s %17s %18s %6s %6s %17s %18s\n" , +" " , +" Data Misses" , +" Data Misses" , +"Remote" , +"Local" , +"-- Store Refs --" , +" " , +" " , +" " , +" " , +" " ); + +printf ("%4s %13s %13s %8s %8s %8s %8s %18s %6s %6s %17s %18s %8s %6s\n" , +" " , +" " , +" " , +" " , +" " , +" " , +" " , +" " , +" " , +" " , +" " , +"---- cycles ----" , +" " , +"cpu" ); + +printf ("%s\n" , title2); +printf ("%s\n" , delimit); +} + +static void print_hitm_cacheline (struct c2c_hit *h, +int record, +double tot_cumm, +double ld_cumm, +double tot_dist, +double ld_dist) +{ +char pidstr[7 ]; +char addrstr[20 ]; +static char summary[MAXLBL_SZ ]; +int j; + +if (h->pid >0 ) +sprintf (pidstr,"%6d" , h->pid); +else +sprintf (pidstr,"***" ); +/* +* It is possible to have none distinct virtual addresses +* pointing to a distinct SYstem V shared memory region. +* if there are multple virtual addresses the address +* field will be astericks. It would be possible to subsitute +* the physical address but this count be confusing as some +* times the field is a virtual address while or times it +* may be a physical address which may lead to confusion. +*/ +if (h->daddr != ~0UL ) +sprintf (addrstr,"%#18lx" ,CLADRS (h->daddr)); +else +sprintf (addrstr,"****************" ); + + +sprintf (summary,"%4d %5.1f%% %5.1f%% %5.1f%% %5.1f%% %8d %8d %8d %8d %18s %6s\n" , + record, + tot_dist *100. , + tot_cumm *100. , + ld_dist *100. , + ld_cumm *100. , + h->stats.t.rmt_hitm, + h->stats.t.lcl_hitm, + h->stats.t.st_l1hit, + h->stats.t.st_l1miss, + addrstr, + pidstr); + +for (j =0 ; j < (int )strlen (summary); j++)printf ("-" ); +printf ("\n" ); +printf ("%s" , summary); +for (j =0 ; j < (int )strlen (summary); j++)printf ("-" ); +printf ("\n" ); +} + +static void print_socket_stats_str (struct c2c_hit *clo, +struct c2c_stats *node_stats) +{ +int i, j; + +if (!node_stats) +return ; + +for (i =0 ; i < max_node_num; i++) { +struct c2c_stats *stats = &node_stats[i]; +int num =CPU_COUNT (&stats->cpuset); + +if (!num) { +/* pad align socket info */ +for (j =0 ; j <21 ; j++) +printf (" " ); +continue ; + } + +printf ("%2d{%2d " , i, num); + +if (clo->stats.t.rmt_hitm >0 ) +printf ("%5.1f%% " ,100. * ((double )stats->t.rmt_hitm / (double ) clo->stats.t.rmt_hitm)); +else +printf ("%6s " ,"n/a" ); + +if (clo->stats.t.store >0 ) +printf ("%5.1f%%} " ,100. * ((double )stats->t.store / (double )clo->stats.t.store)); +else +printf ("%6s} " ,"n/a" ); + } +} + +static void print_socket_shared_str (struct c2c_stats *node_stats) +{ +int i, j; + +if (!node_stats) +return ; + +for (i =0 ; i < max_node_num; i++) { +struct c2c_stats *stats = &node_stats[i]; +int num =CPU_COUNT (&stats->cpuset); +int start =-1 ; +bool first = true; + +if (!num) +continue ; + +printf ("%d{" , i); + +for (j =0 ; j < max_cpu_num; j++) { +if (!CPU_ISSET (j, &stats->cpuset)) { +if (start !=-1 ) { +if ((j-1 ) - start) +/* print the range */ +printf ("%s%d-%d" , (first ?"" :"," ), start, j-1 ); +else +/* standalone */ +printf ("%s%d" , (first ?"" :"," ) , start); + start =-1 ; + first = false; + } +continue ; + } + +if (start ==-1 ) + start = j; + } +/* last chunk */ +if (start !=-1 ) { +if ((j-1 ) - start) +/* print the range */ +printf ("%s%d-%d" , (first ?"" :"," ), start, j-1 ); +else +/* standalone */ +printf ("%s%d" , (first ?"" :"," ) , start); + } + +printf ("}; " ); + } +} + +static void print_hitm_cacheline_offset (struct c2c_hit *clo, +struct c2c_hit *h, +struct c2c_stats *node_stats) +{ +#define SHORT_STR_LEN 7 +#define LONG_STR_LEN 30 + +char pidstr[SHORT_STR_LEN ]; +char tidstr[SHORT_STR_LEN ]; +char addrstr[LONG_STR_LEN ]; +char latstr[LONG_STR_LEN ]; +char objptr[LONG_STR_LEN ]; +char symptr[LONG_STR_LEN ]; +struct c2c_stats *stats = &clo->stats; +struct addr_map_symbol *ams; + + ams = &clo->mi->iaddr; + +if (clo->pid >=0 ) +snprintf (pidstr,SHORT_STR_LEN ,"%6d" , clo->pid); +else +sprintf (pidstr,"***" ); + +if (clo->tid >=0 ) +snprintf (tidstr,SHORT_STR_LEN ,"%6d" , clo->tid); +else +sprintf (tidstr,"***" ); + +if (clo->iaddr != ~0UL ) +snprintf (addrstr,LONG_STR_LEN ,"%#18lx" , clo->iaddr); +else +sprintf (addrstr,"****************" ); +snprintf (objptr,LONG_STR_LEN ,"%-18s" , ams->map->dso->short_name); +snprintf (symptr,LONG_STR_LEN ,"%-18s" , (ams->sym ? ams->sym->name :"?????" )); + +if (stats->t.rmt_hitm >0 ) { +double mean =avg_stats (&stats->stats); +double std =stddev_stats (&stats->stats); + +sprintf (latstr,"%8.0f %8.0f %7.1f%%" , +-1.0 ,/* FIXME */ + mean, +rel_stddev_stats (std, mean)); + }else { +sprintf (latstr,"%8s %8s %8s" , +"n/a" , +"n/a" , +"n/a" ); + + } + +/* +* implicit assumption that we are not coalescing over IPs +*/ +printf ("%4s %6s %6s %6s %6s %7.1f%% %7.1f%% %7.1f%% %7.1f%% %14s0x%02lx %6s %6s %18s %8s %6d %-30s %-20s" , +" " , +" " , +" " , +" " , +" " , + (stats->t.rmt_hitm >0 ) ? (100. * ((double )stats->t.rmt_hitm / (double )h->stats.t.rmt_hitm)) :0.0 , + (stats->t.lcl_hitm >0 ) ? (100. * ((double )stats->t.lcl_hitm / (double )h->stats.t.lcl_hitm)) :0.0 , + (stats->t.st_l1hit >0 ) ? (100. * ((double )stats->t.st_l1hit / (double )h->stats.t.st_l1hit)) :0.0 , + (stats->t.st_l1miss >0 ) ? (100. * ((double )stats->t.st_l1miss / (double )h->stats.t.st_l1miss)) :0.0 , +" " , + (cloffset ==LVL2 ) ? (clo->daddr &0xff ) :CLOFFSET (clo->daddr), + pidstr, + tidstr, + addrstr, + latstr, +CPU_COUNT (&clo->stats.cpuset), + symptr, + objptr); + +if (node_info ==0 ) +printf (" " ); +else if (node_info ==1 ) +print_socket_stats_str (clo, node_stats); +else if (node_info ==2 ) +print_socket_shared_str (node_stats); + +printf ("\n" ); +} + +static void print_c2c_hitm_report (struct rb_root *hitm_tree, +struct c2c_stats *hitm_stats__maybe_unused , +struct c2c_stats *c2c_stats) +{ +struct rb_node *next =rb_first (hitm_tree); +struct c2c_hit *h, *clo =NULL ; +u64 addr; +double tot_dist, tot_cumm; +double ld_dist, ld_cumm; +int llc_misses; +int record =0 ; +struct c2c_stats *node_stats =NULL ; + +if (node_info) { + node_stats =zalloc (sizeof (struct c2c_stats ) *cpu__max_node ()); +if (!node_stats) { +printf ("Can not allocate stats for node output\n" ); +return ; + } + } + +print_hitm_cacheline_header (); + + llc_misses = c2c_stats->t.lcl_dram + + c2c_stats->t.rmt_dram + + c2c_stats->t.rmt_hit + + c2c_stats->t.rmt_hitm; + +/* +* generate distinct cache line report +*/ + tot_cumm =0.0 ; + ld_cumm =0.0 ; + +while (next) { +struct hist_entry *entry; + + h = rb_entry(next, struct c2c_hit, rb_node); + next =rb_next (&h->rb_node); + + tot_dist = ((double )h->stats.t.rmt_hitm / llc_misses); + tot_cumm += tot_dist; + + ld_dist = ((double )h->stats.t.rmt_hitm / c2c_stats->t.rmt_hitm); + ld_cumm += ld_dist; + +/* +* don't display lines with insignificant sharing contribution +*/ +if (ld_dist <DISPLAY_LINE_LIMIT ) +break ; + +print_hitm_cacheline (h, record, tot_cumm, ld_cumm, tot_dist, ld_dist); + +list_for_each_entry (entry, &h->list, pairs.node) { + +if (!clo || !matching_coalescing (clo, entry)) { +if (clo) +print_hitm_cacheline_offset (clo, h, node_stats); + +free (clo); + addr = entry->mem_info->iaddr.al_addr; + clo =c2c_hit__new (addr, entry); +if (node_info) +memset (node_stats,0 ,sizeof (struct c2c_stats ) *cpu__max_node ()); + } +c2c_decode_stats (&clo->stats, entry); +c2c_hit__update_strings (clo, entry); + +if (node_info) { +int node =cpu__get_node (entry->cpu); +c2c_decode_stats (&node_stats[node], entry); +CPU_SET (entry->cpu, &(node_stats[node].cpuset)); + } + + } +if (clo) { +print_hitm_cacheline_offset (clo, h, node_stats); +free (clo); + clo =NULL ; + } + +if (node_info) +memset (node_stats,0 ,sizeof (struct c2c_stats ) *cpu__max_node ()); + +printf ("\n" ); + record++; + } +} +static inline int valid_hitm_or_store (union perf_mem_data_src *dsrc) {return ((dsrc->mem_snoop &P (SNOOP ,HITM )) || (dsrc->mem_op &P (OP ,STORE ))); } +static void print_shared_cacheline_info (struct c2c_stats *stats,int cline_cnt) +{ +int hitm_cnt = stats->t.lcl_hitm + stats->t.rmt_hitm; + +printf ("=================================================\n" ); +printf (" Global Shared Cache Line Event Information \n" ); +printf ("=================================================\n" ); +printf (" Total Shared Cache Lines : %10d\n" , cline_cnt); +printf (" Load HITs on shared lines : %10d\n" , stats->t.load); +printf (" Fill Buffer Hits on shared lines : %10d\n" , stats->t.ld_fbhit); +printf (" L1D hits on shared lines : %10d\n" , stats->t.ld_l1hit); +printf (" L2D hits on shared lines : %10d\n" , stats->t.ld_l2hit); +printf (" LLC hits on shared lines : %10d\n" , stats->t.ld_llchit + stats->t.lcl_hitm); +printf (" Locked Access on shared lines : %10d\n" , stats->t.locks); +printf (" Store HITs on shared lines : %10d\n" , stats->t.store); +printf (" Store L1D hits on shared lines : %10d\n" , stats->t.st_l1hit); +printf (" Total Merged records : %10d\n" , hitm_cnt + stats->t.store); +} +static void c2c_analyze_hitms (struct perf_c2c *c2c) {
@@ -611,6 +1123,9 @@ static void c2c_analyze_hitms(struct perf_c2c *c2c) }else free (h); +print_shared_cacheline_info (&hitm_stats, shared_clines); +print_c2c_hitm_report (&hitm_tree, &hitm_stats, &c2c->stats); + cleanup: next =rb_first (&hitm_tree);while (next) {
@@ -813,6 +1328,10 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) "specify the precision level of events (0,1,2,3) [default=1]"),OPT_CALLBACK_NOOPT (0 ,"no-stores" , &no_stores,"" ,"do not record stores" , &opt_no_stores_cb), +OPT_INCR ('N' ,"node-info" , &node_info, +"show extra node info in report (repeat for more info)" ), +OPT_INTEGER ('c' ,"coalesce-level" , &coalesce_level, +"how much coalescing for tid, pid, and ip is done (repeat for more coalescing)" ),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose (show counter open errors, etc)" ), OPT_STRING('i', "input", &input_name, "file",
Signature · 1 line
1.7.11.7
Re: [PATCH 10/15 V3] perf, c2c: Display cacheline HITM analysis to stdout
tools/perf/builtin-c2c.c static void c2c_hit__update_strings(struct c2c_hit *h, · line 434
Quoted 2 lines
tools/perf/builtin-c2c.c +2
-0+if (coalesce_level >MAX_LVL ) +printf ("DON: bad coalesce level %d\n" , coalesce_level);
Please use pr_warning() with the "DON" prefix removed :)
Thanks,
Namhyung
Re: [PATCH 10/15 V3] perf, c2c: Display cacheline HITM analysis to stdout
In reply to Don ZickusHi Don,
tools/perf/builtin-c2c.c static void c2c_hit__update_stats(struct c2c_stats *new, · line 771
Quoted 6 lines · Don Zickus
tools/perf/builtin-c2c.c +6
-0+ sprintf(summary, "%4d %5.1f%% %5.1f%% %5.1f%% %5.1f%% %8d %8d %8d %8d %18s %6s\n", + record, + tot_dist * 100., + tot_cumm * 100., + ld_dist * 100., + ld_cumm * 100.,
I think adding a 0 after decimal point helps readability little bit.
Quoted 27 lines
tools/perf/builtin-c2c.c +27
-0+ h->stats.t.rmt_hitm, + h->stats.t.lcl_hitm, + h->stats.t.st_l1hit, + h->stats.t.st_l1miss, + addrstr, + pidstr); + +for (j =0 ; j < (int )strlen (summary); j++)printf ("-" ); +printf ("\n" ); +printf ("%s" , summary); +for (j =0 ; j < (int )strlen (summary); j++)printf ("-" ); +printf ("\n" ); +} + +static void print_socket_stats_str (struct c2c_hit *clo, +struct c2c_stats *node_stats) +{ +int i, j; + +if (!node_stats) +return ; + +for (i =0 ; i < max_node_num; i++) { +struct c2c_stats *stats = &node_stats[i]; +int num =CPU_COUNT (&stats->cpuset); + +if (!num) {
tools/perf/builtin-c2c.c static void c2c_hit__update_stats(struct c2c_stats *new, · line 808
Quoted 10 lines
tools/perf/builtin-c2c.c +10
-0+/* pad align socket info */ +for (j =0 ; j <21 ; j++) +printf (" " ); +continue ; + } + +printf ("%2d{%2d " , i, num); + +if (clo->stats.t.rmt_hitm >0 ) +printf ("%5.1f%% " ,100. * ((double )stats->t.rmt_hitm / (double ) clo->stats.t.rmt_hitm));
Just for your information, most perf tools show 2 digit after decimal point so it'd be "%5.2f%%" but it's not a strict rule.
Anyway I think multiplying 100.0 first can remove the casts. So code below will do the same thing..
100.0 * stats->t.rmt_hitm / clo->stats.t.rmt_hitm
The same goes to other percentage calculations too.
Thanks,
Namhyung
Quoted 9 lines
tools/perf/builtin-c2c.c +9
-0+else +printf ("%6s " ,"n/a" ); + +if (clo->stats.t.store >0 ) +printf ("%5.1f%%} " ,100. * ((double )stats->t.store / (double )clo->stats.t.store)); +else +printf ("%6s} " ,"n/a" ); + } +}
PATCH v3 11/15 perf, c2c: Add callchain support
In reply to Don ZickusSeeing cacheline statistics is useful by itself. Seeing the callchain for these cache contentions saves time tracking things down.
This patch tries to add callchain support. I had to use the generic interface from a previous patch to output things to stdout easily.
Other than the displaying the results, collecting the callchain and merging it was fairly straightforward.
I used a lot of copying-n-pasting from other builtin tools to get the intial parameter setup correctly and the automatic reading of 'symbol_conf.use_callchain' from the data file.
Hopefully this is all correct. The amount of memory corruption (from the callchain dynamic array) seems to have dwindled done to nothing. :-)
V2: update to latest api
V3: remove call_graph variable, unused
--- tools/perf/builtin-c2c.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-)
tools/perf/builtin-c2c.c +66 -1
@@ -79,6 +79,8 @@ struct c2c_hit {u64 daddr;u64 iaddr;struct mem_info *mi; + +struct callchain_root callchain[0 ];/* must be last member */ };enum {OP ,LVL ,SNP ,LCK ,TLB };
@@ -382,7 +384,8 @@ static int c2c_decode_stats(struct c2c_stats *stats, struct hist_entry *entry)static struct c2c_hit *c2c_hit__new (u64 cacheline,struct hist_entry *entry) { -struct c2c_hit *h =zalloc (sizeof (struct c2c_hit )); +size_t callchain_size = symbol_conf.use_callchain ?sizeof (struct callchain_root ) :0 ; +struct c2c_hit *h =zalloc (sizeof (struct c2c_hit ) + callchain_size);if (!h) {pr_err ("Could not allocate c2c_hit memory\n" );
@@ -396,6 +399,8 @@ static struct c2c_hit *c2c_hit__new(u64 cacheline, struct hist_entry *entry) h->cacheline = cacheline; h->pid = entry->thread->pid_; h->tid = entry->thread->tid; +if (symbol_conf.use_callchain) +callchain_init (h->callchain);/* use original addresses here, not adjusted al_addr */ h->iaddr = entry->mem_info->iaddr.addr;
@@ -519,6 +524,10 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c,return 0 ; } + err =sample__resolve_callchain (sample, &parent, evsel, al,PERF_MAX_STACK_DEPTH ); +if (err) +return err; + cost = sample->weight;if (!cost) cost =1 ;
@@ -547,6 +556,7 @@ static int perf_c2c__process_load_store(struct perf_c2c *c2c, c2c->hists.stats.total_period += cost;hists__inc_nr_events (&c2c->hists,PERF_RECORD_SAMPLE ); + err =hist_entry__append_callchain (he, sample);return err; out_mem:
@@ -948,6 +958,13 @@ static void print_hitm_cacheline_offset(struct c2c_hit *clo,print_socket_shared_str (node_stats);printf ("\n" ); + +if (symbol_conf.use_callchain) { +generic_entry_callchain__fprintf (clo->callchain, + h->stats.total_period, + clo->stats.total_period, +23 , stdout); + } } static void print_c2c_hitm_report(struct rb_root *hitm_tree,
@@ -1024,6 +1041,12 @@ static void print_c2c_hitm_report(struct rb_root *hitm_tree,c2c_decode_stats (&node_stats[node], entry);CPU_SET (entry->cpu, &(node_stats[node].cpuset)); } +if (symbol_conf.use_callchain) { +callchain_cursor_reset (&callchain_cursor); +callchain_merge (&callchain_cursor, + clo->callchain, + entry->callchain); + } }if (clo) {
@@ -1155,6 +1178,29 @@ err:return err; } +static int perf_c2c__setup_sample_type (struct perf_c2c *c2c__maybe_unused , +struct perf_session *session) +{ +u64 sample_type =perf_evlist__combined_sample_type (session->evlist); + +if (!(sample_type &PERF_SAMPLE_CALLCHAIN )) { +if (symbol_conf.use_callchain) { +printf ("Selected -g but no callchain data. Did " +"you call 'perf c2c record' without -g?\n" ); +return -1 ; + } + }else if (callchain_param.mode !=CHAIN_NONE && + !symbol_conf.use_callchain) { + symbol_conf.use_callchain = true; +if (callchain_register_param (&callchain_param) <0 ) { +printf ("Can't register callchain params.\n" ); +return -EINVAL ; + } + } + +return 0 ; +} +static int perf_c2c__read_events (struct perf_c2c *c2c) {int err =-1 ;
@@ -1174,6 +1220,9 @@ static int perf_c2c__read_events(struct perf_c2c *c2c)if (symbol__init () <0 ) goto out_delete; +if (perf_c2c__setup_sample_type (c2c, session) <0 ) + goto out_delete; +/* setup the evsel handlers for each event type */ evlist__for_each (session->evlist, evsel) {const char *name =perf_evsel__name (evsel);
@@ -1306,8 +1355,21 @@ opt_no_stores_cb(const struct option *opt __maybe_unused, const char *arg __maybreturn 0 ; } +static int +opt_callchain_cb (const struct option *opt__maybe_unused ,const char *arg,int unset) +{ +/* +* --no-call-graph +*/ +if (unset) +return 0 ; + +return report_parse_callchain_opt (arg); +} +int cmd_c2c (int argc,const char **argv,const char *prefix__maybe_unused ) { +char callchain_default_opt[] ="fractal,0.05,callee" ;struct perf_c2c c2c = { .tool = { .sample = perf_c2c__process_sample,
@@ -1340,6 +1402,9 @@ int cmd_c2c(int argc, const char **argv, const char *prefix __maybe_unused) "separator", "separator for columns, no spaces will be added" " between columns '.' is reserved."), +OPT_CALLBACK_DEFAULT ('g' ,"call-graph" , &c2c,"output_type,min_percent[,print_limit],call_order" , +"Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold, optional print limit, callchain order, key (function or address). " +"Default: fractal,0.5,callee,function" , &opt_callchain_cb, callchain_default_opt),OPT_END () }; const char * const c2c_usage[] = {
Signature · 1 line
1.7.11.7
PATCH v3 12/15 perf, c2c: Output summary stats
In reply to Don ZickusOutput some summary stats based on the processed records. Mainly diagnostic uses.
Stats done by Dick Fowles, backported by me.
Sample output:
=================================================
Trace Event Information
=================================================
Total records : 1322047 Locked Load/Store Operations : 206317 Load Operations : 355701 Loads - uncacheable : 590 Loads - IO : 0 Loads - Miss : 440 Loads - no mapping : 207 Load Fill Buffer Hit : 100214 Load L1D hit : 148454 Load L2D hit : 15170 Load LLC hit : 53872 Load Local HITM : 15388 Load Remote HITM : 26760 Load Remote HIT : 3910 Load Local DRAM : 2436 Load Remote DRAM : 3648 Load MESI State Exclusive : 2883 Load MESI State Shared : 3201 Load LLC Misses : 36754 LLC Misses to Local DRAM : 6.6% LLC Misses to Remote DRAM : 9.9% LLC Misses to Remote cache (HIT) : 10.6% LLC Misses to Remote cache (HITM) : 72.8% Store Operations : 966322 Store - uncacheable : 0 Store - no mapping : 42931 Store L1D Hit : 915696 Store L1D Miss : 7695 No Page Map Rejects : 1193 Unable to parse data source : 24
V2: refresh to hist_entry
--- tools/perf/builtin-c2c.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 46 insertions(+), 1 deletion(-)
tools/perf/builtin-c2c.c +46 -1
@@ -966,7 +966,6 @@ static void print_hitm_cacheline_offset(struct c2c_hit *clo, 23, stdout); } } -static void print_c2c_hitm_report (struct rb_root *hitm_tree,struct c2c_stats *hitm_stats__maybe_unused ,struct c2c_stats *c2c_stats)
@@ -1161,6 +1160,51 @@ cleanup:return ; } +static void print_c2c_trace_report (struct perf_c2c *c2c) +{ +int llc_misses; +struct c2c_stats *stats = &c2c->stats; + + llc_misses = stats->t.lcl_dram + + stats->t.rmt_dram + + stats->t.rmt_hit + + stats->t.rmt_hitm; + +printf ("=================================================\n" ); +printf (" Trace Event Information \n" ); +printf ("=================================================\n" ); +printf (" Total records : %10d\n" , c2c->stats.nr_entries); +printf (" Locked Load/Store Operations : %10d\n" , stats->t.locks); +printf (" Load Operations : %10d\n" , stats->t.load); +printf (" Loads - uncacheable : %10d\n" , stats->t.ld_uncache); +printf (" Loads - IO : %10d\n" , stats->t.ld_io); +printf (" Loads - Miss : %10d\n" , stats->t.ld_miss); +printf (" Loads - no mapping : %10d\n" , stats->t.ld_noadrs); +printf (" Load Fill Buffer Hit : %10d\n" , stats->t.ld_fbhit); +printf (" Load L1D hit : %10d\n" , stats->t.ld_l1hit); +printf (" Load L2D hit : %10d\n" , stats->t.ld_l2hit); +printf (" Load LLC hit : %10d\n" , stats->t.ld_llchit + stats->t.lcl_hitm); +printf (" Load Local HITM : %10d\n" , stats->t.lcl_hitm); +printf (" Load Remote HITM : %10d\n" , stats->t.rmt_hitm); +printf (" Load Remote HIT : %10d\n" , stats->t.rmt_hit); +printf (" Load Local DRAM : %10d\n" , stats->t.lcl_dram); +printf (" Load Remote DRAM : %10d\n" , stats->t.rmt_dram); +printf (" Load MESI State Exclusive : %10d\n" , stats->t.ld_excl); +printf (" Load MESI State Shared : %10d\n" , stats->t.ld_shared); +printf (" Load LLC Misses : %10d\n" , llc_misses); +printf (" LLC Misses to Local DRAM : %10.1f%%\n" , ((double )stats->t.lcl_dram/(double )llc_misses) *100. ); +printf (" LLC Misses to Remote DRAM : %10.1f%%\n" , ((double )stats->t.rmt_dram/(double )llc_misses) *100. ); +printf (" LLC Misses to Remote cache (HIT) : %10.1f%%\n" , ((double )stats->t.rmt_hit /(double )llc_misses) *100. ); +printf (" LLC Misses to Remote cache (HITM) : %10.1f%%\n" , ((double )stats->t.rmt_hitm/(double )llc_misses) *100. ); +printf (" Store Operations : %10d\n" , stats->t.store); +printf (" Store - uncacheable : %10d\n" , stats->t.st_uncache); +printf (" Store - no mapping : %10d\n" , stats->t.st_noadrs); +printf (" Store L1D Hit : %10d\n" , stats->t.st_l1hit); +printf (" Store L1D Miss : %10d\n" , stats->t.st_l1miss); +printf (" No Page Map Rejects : %10d\n" , stats->t.nomap); +printf (" Unable to parse data source : %10d\n" , stats->t.noparse); +} +static int perf_c2c__process_events (struct perf_session *session,struct perf_c2c *c2c) {
@@ -1172,6 +1216,7 @@ static int perf_c2c__process_events(struct perf_session *session, goto err; } +print_c2c_trace_report (c2c);c2c_analyze_hitms (c2c); err:
Signature · 1 line
1.7.11.7
PATCH v3 13/15 perf, c2c: Dump rbtree for debugging
In reply to Don ZickusSometimes you want to verify the rbtree sorting on a unique id is working correctly. This allows you to dump it.
Sample output:
Idx Hit Maj Min Ino InoGen Pid Daddr Iaddr Data Src (string) cpumode
0 0 0 0 0 0 22 ffffffff813044cf 48080184 [STORE,L1,MISS,SNP NA] 1
1 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
2 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
3 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
4 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
5 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
6 0 0 0 0 2332 ca3 ffffffffa0226032 48080184 [STORE,L1,MISS,SNP NA] 1
7 0 0 0 0 18179 135f860 ffffffff812ad509 68100242 [LOAD,LFB,HIT,SNP NONE] 1
8 0 0 0 0 18179 7ff9d7fbaf98 ffffffff812ad509 68100242 [LOAD,LFB,HIT,SNP NONE] 1
V2: refresh with hist_entry
--- tools/perf/builtin-c2c.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
tools/perf/builtin-c2c.c +51 -0
@@ -619,6 +619,55 @@ err:#define HAS_HITMS (h) (h->stats.t.lcl_hitm || h->stats.t.rmt_hitm) +static void dump_rb_tree (struct rb_root *tree, +struct perf_c2c *c2c__maybe_unused ) +{ +struct rb_node *next =rb_first (tree); +struct hist_entry *he; +u64 cl =0 ; +int idx =0 ; + +printf ("# Summary: Total entries - %d\n" , c2c->stats.nr_entries); +printf ("# HITMs: Local - %d Remote - %d Total - %d\n" , + c2c->stats.t.lcl_hitm, c2c->stats.t.rmt_hitm, + (c2c->stats.t.lcl_hitm + c2c->stats.t.rmt_hitm)); + +printf ("%6s %3s %3s %3s %8s %16s %6s %16s %16s %16s %32s %8s\n" , +"Idx" ,"Hit" ,"Maj" ,"Min" ,"Ino" ,"InoGen" ,"Pid" , +"Daddr" ,"Iaddr" ,"Data Src" ,"(string)" ,"cpumode" ); +while (next) { +char data_src[32 ]; +u64 val; + + he = rb_entry(next, struct hist_entry, rb_node_in); + next =rb_next (&he->rb_node_in); + +if ((!he->color) || (cl !=CLADRS (he->mem_info->daddr.al_addr))) { +printf ("\n" ); + cl =CLADRS (he->mem_info->daddr.al_addr); + } + + val = he->mem_info->data_src.val; +perf_c2c__scnprintf_data_src (data_src,sizeof (data_src), val); + +printf ("%6d %3s %3x %3x %8lx %16lx %6d %16lx %16lx %16lx %32s %8x\n" , + idx, + (PERF_MEM_S (SNOOP ,HITM ) & val) ?" * " :" " , + he->mem_info->daddr.map->maj, + he->mem_info->daddr.map->min, + he->mem_info->daddr.map->ino, + he->mem_info->daddr.map->ino_generation, + he->thread->pid_, + he->mem_info->daddr.addr, + he->mem_info->iaddr.addr, + val, + data_src, + he->cpumode); + + idx++; + } +} +static void c2c_hit__update_stats (struct c2c_stats *new,struct c2c_stats *old) {
@@ -1216,6 +1265,8 @@ static int perf_c2c__process_events(struct perf_session *session, goto err; } +if (verbose >2 ) +dump_rb_tree (c2c->hists.entries_in, c2c);print_c2c_trace_report (c2c);c2c_analyze_hitms (c2c);
Signature · 1 line
1.7.11.7
PATCH v3 14/15 perf, c2c: Add symbol count table
In reply to Don ZickusJust another table that displays the referenced symbols in the analysis report. The table lists the most frequently used symbols first.
It is just another way to look at similar data to figure out who is causing the most contention (based on the workload used).
Original done by Dick Fowles, backported by me.
Sample output:
=======================================================================================================
Object Name, Path & Reference Counts
Index Records Object Name Object Path
=======================================================================================================
0 931379 [kernel.kallsyms] [kernel.kallsyms]
1 192258 fio /home/joe/old_fio-2.0.15/fio
2 80302 [jbd2] /lib/modules/3.10.0c2c_all+/kernel/fs/jbd2/jbd2.ko
3 65392 [ext4] /lib/modules/3.10.0c2c_all+/kernel/fs/ext4/ext4.koV2: refresh to latest upstream changes and hist_entry
--- tools/perf/builtin-c2c.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+)
tools/perf/builtin-c2c.c +99 -0
@@ -688,6 +688,104 @@ static void c2c_hit__update_stats(struct c2c_stats *new, new->total_period += old->total_period; } +LIST_HEAD (ref_tree); +LIST_HEAD (ref_tree_sorted); +struct refs { +struct list_head list; +int nr; +const char *name; +const char *long_name; +}; + +static int update_ref_list (struct hist_entry *entry) +{ +struct refs *p; +struct dso *dso = entry->mem_info->iaddr.map->dso; +const char *name = dso->short_name; + +list_for_each_entry (p, &ref_tree, list) { +if (!strcmp (p->name, name)) + goto found; + } + + p =zalloc (sizeof (struct refs )); +if (!p) +return -1 ; + p->name = name; + p->long_name = dso->long_name; +list_add_tail (&p->list, &ref_tree); + +found: + p->nr++; +return 0 ; +} + +static void print_symbol_record_count (struct rb_root *tree) +{ +struct rb_node *next =rb_first (tree); +struct hist_entry *he; +struct refs *p, *q, *pn; +char string[256 ]; +char delimit[256 ]; +int i; +int idx =0 ; + +/* gather symbol references */ +while (next) { + he = rb_entry(next, struct hist_entry, rb_node_in); + next =rb_next (&he->rb_node_in); + +if (update_ref_list (he)) { +pr_err ("Could not update reference tree\n" ); + goto cleanup; + } + } + +/* sort on number of references per symbol */ +list_for_each_entry_safe (p, pn, &ref_tree, list) { +list_del_init (&p->list); +list_for_each_entry (q, &ref_tree_sorted, list) { +if (p->nr > q->nr) { +list_add_tail (&p->list, &q->list); +break ; + } + } +if (list_empty (&p->list)) +list_add_tail (&p->list, &ref_tree_sorted); + } + +/* print header info */ +sprintf (string,"%5s %8s %-32s %-80s" , +"Index" , +"Records" , +"Object Name" , +"Object Path" ); + + delimit[0 ] ='\0' ; +for (i =0 ; i < (int )strlen (string); i++)strcat (delimit,"=" ); + +printf ("\n\n" ); +printf ("%s\n" , delimit); +printf ("%50s %s\n" ," " ,"Object Name, Path & Reference Counts" ); +printf ("\n" ); +printf ("%s\n" , string); +printf ("%s\n" , delimit); + +/* print out table */ +list_for_each_entry (p, &ref_tree_sorted, list) { +printf ("%5d %8d %-32s %-80s\n" , + idx, p->nr, p->name, p->long_name); + idx++; + } +printf ("\n" ); + +cleanup: +list_for_each_entry_safe (p, pn, &ref_tree_sorted, list) { +list_del (&p->list); +free (p); + } +} +static void print_hitm_cacheline_header (void ) {#define SHARING_REPORT_TITLE "Shared Cache Line Distribution Pareto"
@@ -1269,6 +1367,7 @@ static int perf_c2c__process_events(struct perf_session *session,dump_rb_tree (c2c->hists.entries_in, c2c);print_c2c_trace_report (c2c);c2c_analyze_hitms (c2c); +print_symbol_record_count (c2c->hists.entries_in); err:return err;
Signature · 1 line
1.7.11.7
PATCH v3 15/15 perf, c2c: Add shared cachline summary table
In reply to Don ZickusThis adds a quick summary of the hottest cache contention lines based on the input data. This summarizes what the broken table shows you, so you can see at a quick glance which cachelines are interesting.
Originally done by Dick Fowles, backported by me.
Sample output (width trimmed):
===================================================================================================================================================
Shared Data Cache Line Table
Total %All Total ---- Core Load Hit ---- -- LLC Load Hit -- ----- LLC Load Hitm -----
Index Phys Adrs Records Ld Miss %hitm Loads FB L1D L2D Lcl Rmt Total Lcl Rmt
====================================================================================================================================================
0 0xffff881fa55b0140 72006 16.97% 23.31% 43095 13591 16860 45 2651 25 9526 3288 6238
1 0xffff881fba47f000 21854 5.29% 7.26% 13938 3887 6941 15 1 7 3087 1143 1944
2 0xffff881fc21b9cc0 2153 1.61% 2.21% 862 32 70 0 15 1 740 148 592
3 0xffff881fc7d91cc0 1957 1.40% 1.92% 866 34 94 0 14 3 720 207 513
4 0xffff881fba539cc0 1813 1.35% 1.85% 808 33 84 3 14 1 665 170 495--- tools/perf/builtin-c2c.c | 136 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+)
tools/perf/builtin-c2c.c +136 -0
@@ -786,6 +786,141 @@ cleanup: } } +static void print_c2c_shared_cacheline_report (struct rb_root *hitm_tree, +struct c2c_stats *shared_stats__maybe_unused , +struct c2c_stats *c2c_stats__maybe_unused ) +{ +#define SHM_TITLE "Shared Data Cache Line Table" + +struct rb_node *next =rb_first (hitm_tree); +struct c2c_hit *h; +char header[256 ]; +char delimit[256 ]; +u32 crecords; +u32 lclmiss; +u32 ldcnt; +double p_hitm; +double p_all; +int totmiss; +int rmt_hitm; +int len; +int pad; +int i; + +sprintf (header,"%28s %8s %8s %8s %8s %28s %18s %28s %18s %8s %28s" , +" " , +"Total" , +"%All " , +" " , +"Total" , +"---- Core Load Hit ----" , +"-- LLC Load Hit --" , +"----- LLC Load Hitm -----" , +"-- Load Dram --" , +"LLC " , +"---- Store Reference ----" ); + + len =strlen (header); + delimit[0 ] ='\0' ; + +for (i =0 ; i < len; i++) +strcat (delimit,"=" ); + +printf ("\n\n" ); +printf ("%s\n" , delimit); +printf ("\n" ); + pad = (strlen (header)/2 ) - (strlen (SHM_TITLE )/2 ); +for (i =0 ; i < pad; i++) +printf (" " ); +printf ("%s\n" ,SHM_TITLE ); +printf ("\n" ); +printf ("%s\n" , header); + +sprintf (header,"%8s %18s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s" , +"Index" , +"Phys Adrs" , +"Records" , +"Ld Miss" , +"%hitm" , +"Loads" , +"FB" , +"L1D" , +"L2D" , +"Lcl" , +"Rmt" , +"Total" , +"Lcl" , +"Rmt" , +"Lcl" , +"Rmt" , +"Ld Miss" , +"Total" , +"L1Hit" , +"L1Miss" ); + +printf ("%s\n" , header); +printf ("%s\n" , delimit); + + rmt_hitm = c2c_stats->t.rmt_hitm; + totmiss = c2c_stats->t.lcl_dram + + c2c_stats->t.rmt_dram + + c2c_stats->t.rmt_hit + + c2c_stats->t.rmt_hitm; + + i =0 ; +while (next) { + h = rb_entry(next, struct c2c_hit, rb_node); + next =rb_next (&h->rb_node); + + lclmiss = h->stats.t.lcl_dram + + h->stats.t.rmt_dram + + h->stats.t.rmt_hitm + + h->stats.t.rmt_hit; + + ldcnt = lclmiss + + h->stats.t.ld_fbhit + + h->stats.t.ld_l1hit + + h->stats.t.ld_l2hit + + h->stats.t.ld_llchit + + h->stats.t.lcl_hitm; + + crecords = ldcnt + + h->stats.t.st_l1hit + + h->stats.t.st_l1miss; + + p_hitm = (double )h->stats.t.rmt_hitm / (double )rmt_hitm; + p_all = (double )h->stats.t.rmt_hitm / (double )totmiss; + +/* stop when the percentage gets to low */ +if (p_hitm <DISPLAY_LINE_LIMIT ) +break ; + +printf ("%8d %#18lx %8u %7.2f%% %7.2f%% %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u %8u\n" , + i, + h->cacheline, + crecords, +100. * p_all, +100. * p_hitm, + ldcnt, + h->stats.t.ld_fbhit, + h->stats.t.ld_l1hit, + h->stats.t.ld_l2hit, + h->stats.t.ld_llchit, + h->stats.t.rmt_hit, + h->stats.t.lcl_hitm + h->stats.t.rmt_hitm, + h->stats.t.lcl_hitm, + h->stats.t.rmt_hitm, + h->stats.t.lcl_dram, + h->stats.t.rmt_dram, + lclmiss, + h->stats.t.store, + h->stats.t.st_l1hit, + h->stats.t.st_l1miss); + + i++; + } +} +static void print_hitm_cacheline_header (void ) {#define SHARING_REPORT_TITLE "Shared Cache Line Distribution Pareto"
@@ -1293,6 +1428,7 @@ static void c2c_analyze_hitms(struct perf_c2c *c2c)free (h);print_shared_cacheline_info (&hitm_stats, shared_clines); +print_c2c_shared_cacheline_report (&hitm_tree, &hitm_stats, &c2c->stats);print_c2c_hitm_report (&hitm_tree, &hitm_stats, &c2c->stats); cleanup:
Signature · 1 line
1.7.11.7