davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
Subsystems (3)
PATCH v3 1/1 davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
For the MityDSP-L138/MityARM-1808 SOMS, read the factory assigned MAC address from the onboard I2C EPROM and assign it to the emac device during platform initialization.
---
Patch is against e90c3a5344683351c7a37f097f1e17d50ee2063c of linux-davinci tree.
Changes since v2:
1) removed 8 bytes of &'s and [0]'s from &foo[0]'s per comments
arch/arm/mach-davinci/board-mityomapl138.c | 62 ++++++++++++++++++++++++++++ 1 files changed, 62 insertions(+), 0 deletions(-)
arch/arm/mach-davinci/board-mityomapl138.c +62 -0
@@ -15,6 +15,8 @@#include <linux/mtd/partitions.h> #include <linux/regulator/machine.h> #include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/etherdevice.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>
@@ -25,6 +27,65 @@#include <mach/mux.h> #define MITYOMAPL138_PHY_ID "0:03" + +#define FACTORY_CONFIG_MAGIC 0x012C0138 +#define FACTORY_CONFIG_VERSION 0x00010001 + +/* Data Held in On-Board I2C device */ +struct factory_config { +u32 magic; +u32 version; +u8 mac[6 ]; +u32 fpga_type; +u32 spare; +u32 serialnumber; +char partnum[32 ]; +}; + +static struct factory_config factory_config; + +static void read_factory_config (struct memory_accessor *a,void *context) +{ +int ret; +struct davinci_soc_info *soc_info = &davinci_soc_info; + + ret = a->read (a, (char *)&factory_config,0 ,sizeof (factory_config)); +if (ret !=sizeof (struct factory_config )) { +pr_warning ("MityOMAPL138: Read Factory Config Failed: %d\n" , + ret); +return ; + } + +if (factory_config.magic !=FACTORY_CONFIG_MAGIC ) { +pr_warning ("MityOMAPL138: Factory Config Magic Wrong (%X)\n" , + factory_config.magic); +return ; + } + +if (factory_config.version !=FACTORY_CONFIG_VERSION ) { +pr_warning ("MityOMAPL138: Factory Config Version Wrong (%X)\n" , + factory_config.version); +return ; + } + +pr_info ("MityOMAPL138: Found MAC = %pM\n" , factory_config.mac); +pr_info ("MityOMAPL138: Part Number = %s\n" , factory_config.partnum); +if (is_valid_ether_addr (factory_config.mac)) +memcpy (soc_info->emac_pdata->mac_addr, + factory_config.mac,ETH_ALEN ); +else +pr_warning ("MityOMAPL138: Invalid MAC found " +"in factory config block\n" ); +} + +static struct at24_platform_data mityomapl138_fd_chip = { + .byte_len =256 , + .page_size =8 , + .flags =AT24_FLAG_READONLY |AT24_FLAG_IRUGO , + .setup = read_factory_config, + .context =NULL , +}; +static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { .bus_freq =100 ,/* kHz */ .bus_delay =0 ,/* usec */
@@ -151,6 +212,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = { }, { I2C_BOARD_INFO("24c02", 0x50), + .platform_data = &mityomapl138_fd_chip, }, };
Signature · 1 line
1.7.0.4
PATCH v3 1/1 davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
Quoted 11 lines · Michael Williamson
For the MityDSP-L138/MityARM-1808 SOMS, read the factory assigned MAC address from the onboard I2C EPROM and assign it to the emac device during platform initialization.
Signed-off-by Michael Williamson <[email protected]>---
Patch is againste90c3a5344683351c7a37f097f1e17d50ee2063cof linux-davinci tree.Changes since v2:
1) removed 8 bytes of &'s and [0]'s from &foo[0]'s per comments
Thanks.
Applying and queuing for 2.6.37 in davinci-next.
Kevin