drm: Move drm_set_preferred_mode() helper from drm_edid to drm_modes
Subsystems (2)
PATCH v2 1/1 drm: Move drm_set_preferred_mode() helper from drm_edid to drm_modes
The helper is generic, it doesn't use the opaque EDID type struct drm_edid and is also used by drivers that only support non-probeable displays such as fixed panels.
These drivers add a list of modes using drm_mode_probed_add() and then set a preferred mode using the drm_set_preferred_mode() helper.
It seems more logical to have the helper definition in drm_modes.o instead of drm_edid.o, since the former contains modes helper while the latter has helpers to manage the EDID information.
Since both drm_edid.o and drm_modes.o object files are built-in the drm.o object, there are no functional changes. But besides being a more logical place for this helper, it could also allow to eventually make drm_edid.o optional and not included in drm.o if only fixed panels must be supported in a given system.
---
Changes in v2:
- Drop unnecessary drm_modes.h header include in drm_edid.c (Jani Nikula).
- Add Jani Nikula's Reviewed-by tag.
drivers/gpu/drm/drm_edid.c | 22 ---------------------- drivers/gpu/drm/drm_modes.c | 22 ++++++++++++++++++++++ include/drm/drm_edid.h | 2 -- include/drm/drm_modes.h | 2 ++ 4 files changed, 24 insertions(+), 24 deletions(-)
drivers/gpu/drm/drm_edid.c +0 -22
@@ -6989,28 +6989,6 @@ int drm_add_modes_noedid(struct drm_connector *connector, }EXPORT_SYMBOL (drm_add_modes_noedid); -/** -* drm_set_preferred_mode - Sets the preferred mode of a connector -* @connector: connector whose mode list should be processed -* @hpref: horizontal resolution of preferred mode -* @vpref: vertical resolution of preferred mode -* -* Marks a mode as preferred if it matches the resolution specified by @hpref -* and @vpref. -*/ -void drm_set_preferred_mode (struct drm_connector *connector, -int hpref,int vpref) -{ -struct drm_display_mode *mode; - -list_for_each_entry (mode, &connector->probed_modes, head) { -if (mode->hdisplay == hpref && - mode->vdisplay == vpref) - mode->type |=DRM_MODE_TYPE_PREFERRED ; - } -} -EXPORT_SYMBOL (drm_set_preferred_mode); -static bool is_hdmi2_sink (const struct drm_connector *connector) {/*
drivers/gpu/drm/drm_modes.c +22 -0
@@ -2754,3 +2754,25 @@ bool drm_mode_is_420(const struct drm_display_info *display,drm_mode_is_420_also (display, mode); }EXPORT_SYMBOL (drm_mode_is_420); + +/** +* drm_set_preferred_mode - Sets the preferred mode of a connector +* @connector: connector whose mode list should be processed +* @hpref: horizontal resolution of preferred mode +* @vpref: vertical resolution of preferred mode +* +* Marks a mode as preferred if it matches the resolution specified by @hpref +* and @vpref. +*/ +void drm_set_preferred_mode (struct drm_connector *connector, +int hpref,int vpref) +{ +struct drm_display_mode *mode; + +list_for_each_entry (mode, &connector->probed_modes, head) { +if (mode->hdisplay == hpref && + mode->vdisplay == vpref) + mode->type |=DRM_MODE_TYPE_PREFERRED ; + } +} +EXPORT_SYMBOL (drm_set_preferred_mode);
include/drm/drm_edid.h +0 -2
@@ -426,8 +426,6 @@ enum hdmi_quantization_range drm_default_rgb_quant_range(const struct drm_display_mode *mode);int drm_add_modes_noedid (struct drm_connector *connector,int hdisplay,int vdisplay); -void drm_set_preferred_mode (struct drm_connector *connector, -int hpref,int vpref);int drm_edid_header_is_valid (const void *edid); bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
include/drm/drm_modes.h +2 -0
@@ -467,6 +467,8 @@ bool drm_mode_is_420_also(const struct drm_display_info *display, const struct drm_display_mode *mode);bool drm_mode_is_420 (const struct drm_display_info *display,const struct drm_display_mode *mode); +void drm_set_preferred_mode (struct drm_connector *connector, +int hpref,int vpref); struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev, enum drm_connector_tv_mode mode,
Signature · 1 line
2.43.0
Javier Martinez Canillas
AppliedQuoted 17 lines · Javier Martinez Canillas
The helper is generic, it doesn't use the opaque EDID type struct
drm_edidand is also used by drivers that only support non-probeable displays such as fixed panels.These drivers add a list of modes using
drm_mode_probed_add()and then set a preferred mode using thedrm_set_preferred_mode()helper.It seems more logical to have the helper definition in drm_modes.o instead of drm_edid.o, since the former contains modes helper while the latter has helpers to manage the EDID information.
Since both drm_edid.o and drm_modes.o object files are built-in the drm.o object, there are no functional changes. But besides being a more logical place for this helper, it could also allow to eventually make drm_edid.o optional and not included in drm.o if only fixed panels must be supported in a given system.
Quoted 3 lines
Signed-off-by Javier Martinez Canillas <[email protected]>Reviewed-by Jani Nikula <[email protected]>---
Pushed to drm-misc (drm-misc-next). Thanks!
Signature · 5 lines
Best regards, Javier Martinez Canillas Core Platforms Red Hat