ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file
PATCH v2 1/1 ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file
Hello all!!
I would like to add a board file for the PCI-E Wi-Fi interface present on the GL.iNet GL-B2200 mesh router, a device added a while ago to OpenWRt.
* Hardware description:
This device seems based on IPQ4019 / AP-DK04.1-C3.
Three radios are used:
- one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous message)
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum (submitted on a previous message)
- a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum (contained in this message)
* origin of the board files:
The board file was provided by the manifacturer, who provided the original patch to support the device in OpenWRt.
* ids to be used with the board files
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20
* attached files:
The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.
Kind regards,
Enrico
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 21 lines · Enrico Mioso
I would like to add a board file for the PCI-E Wi-Fi interface present on the GL.iNet GL-B2200 mesh router, a device added a while ago to OpenWRt.
* Hardware description:
This device seems based on IPQ4019 / AP-DK04.1-C3.
Three radios are used:
- one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous message)
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum (submitted on a previous message)
- a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum (contained in this message)* origin of the board files:
The board file was provided by the manifacturer, who provided the original patch to support the device in OpenWRt.
* ids to be used with the board files
Quoted 7 lines
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
SHA256:7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20* attached files:
The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.
Thanks, added to QCA9888/hw2.0/board-2.bin:
New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 12 in total
https://github.com/kvalo/ath10k-firmware/commit/b'302f5e8de61f53fd48a64455758e07700647818e'
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k