Skip to contentSkip to conversation

powerpc: IRQF_NO_SUSPEND not IRQF_TIMER for non-timer

PATCH Applied John Ogness 2 participants 2 messages Nov 11, 2015 – Nov 26, 2015 Linux for power macintosh

lore
Share & tools
lore

John Ogness

author
#0 lore raw

PATCH 1/1 powerpc: IRQF_NO_SUSPEND not IRQF_TIMER for non-timer

Since gpio1 is not a timer, it also should not use IRQF_TIMER.

Similar to commit ba461f094bab ("powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts").

Signed-off-by John Ogness <[email protected]>
---
 drivers/macintosh/via-pmu.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/macintosh/via-pmu.c +3 -2
index f9512bf..01ee736 100644
@@ -425,8 +425,9 @@ static int __init via_pmu_start(void)
 			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 
 		if (gpio_irq != NO_IRQ) {
-			if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER,
-					"GPIO1 ADB", (void *)0))
+			if (request_irq(gpio_irq, gpio1_interrupt,
+					IRQF_NO_SUSPEND, "GPIO1 ADB",
+					(void *)0))
 				printk(KERN_ERR "pmu: can't get irq %d"
 				       " (GPIO1)\n", gpio_irq);
 			else
Signature · 1 line
1.7.10.4