util-linux: disable fallocate for avr32
PATCH 1/1 util-linux: disable fallocate for avr32
From: Simon Dawson <[email protected]>
The fallocate syscall is not implemented in the avr32 toolchain.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/bc4/bc41a3fea20181526eb247ac910244aa2aa4c4c0/
--- package/util-linux/Config.in | 1 + 1 file changed, 1 insertion(+)
package/util-linux/Config.in +1 -0
@@ -72,6 +72,7 @@ config BR2_PACKAGE_UTIL_LINUX_EJECT config BR2_PACKAGE_UTIL_LINUX_FALLOCATE bool "fallocate" + depends on !BR2_avr32 # fallocate not implemented help Preallocate space to a file
Signature · 1 line
1.8.3.2
PATCH 1/1 util-linux: disable fallocate for avr32
Simon,
Quoted 18 lines · spdawson at gmail.com
From: Simon Dawson <[email protected]>
The fallocate syscall is not implemented in the avr32 toolchain.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/bc4/bc41a3fea20181526eb247ac910244aa2aa4c4c0/
Signed-off-by Simon Dawson <[email protected]>--- package/util-linux/Config.in | 1 + 1 file changed, 1 insertion(+)package/util-linux/Config.in +0
-0
package/util-linux/Config.in config BR2_PACKAGE_UTIL_LINUX_EJECT · line 78
Quoted 7 lines
package/util-linux/Config.in +1
-0@@ -72,6 +72,7 @@ config BR2_PACKAGE_UTIL_LINUX_EJECT config BR2_PACKAGE_UTIL_LINUX_FALLOCATE bool "fallocate" + depends on !BR2_avr32 # fallocate not implemented help Preallocate space to a file
Situation is a bit fuzzy here.
We have added a patch to uClibc that implements fallocate support:package/uclibc/0.9.33.2/uclibc-0041-libc-add-posix_fallocate.patch. So internal toolchains based on 0.9.33.2 should now have fallocate support.
However:
* The AVR32 toolchain used in the autobuilders predates the addition of this patch, and therefore does not have the fallocate support (the autobuilders uses a Buildroot generated toolchain, but generated with Buildroot 2013.05).
* The AVR32 support at the moment is using 0.9.33.2, but you told us that 0.9.33.2 is basically not working properly on AVR32, and that reverting to 0.9.31 was the only solution to get a working AVR32 system. This would indeed mean that fallocate support would not be available on AVR32 (but it would more be related to the uClibc version rather than the architecture).
* A larger problem that I have already raised several times is that adding feature patches to the uClibc package in Buildroot is causing issues with external toolchain support for uClibc toolchains. These external toolchains are very unlikely to carry the same backported feature patches as we do, and therefore the build will break with those external toolchains if Buildroot relies on uClibc having those features.
I'm Cc'ing Arnout, Peter, Yann and Thomas DS on this one, because we really need to define a policy on this topic.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 util-linux: disable fallocate for avr32
Simon, Thomas, All,
On 2013-11-03 11:34 +0100, Thomas Petazzoni spake thusly:
Quoted 55 lines · spdawson at gmail.com
Quoted 18 lines
From: Simon Dawson <[email protected]>
The fallocate syscall is not implemented in the avr32 toolchain.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/bc4/bc41a3fea20181526eb247ac910244aa2aa4c4c0/
Signed-off-by Simon Dawson <[email protected]>--- package/util-linux/Config.in | 1 + 1 file changed, 1 insertion(+)package/util-linux/Config.in +0
-0package/util-linux/Config.in config BR2_PACKAGE_UTIL_LINUX_EJECT · line 78
Quoted 7 lines
package/util-linux/Config.in +1
-0@@ -72,6 +72,7 @@ config BR2_PACKAGE_UTIL_LINUX_EJECT config BR2_PACKAGE_UTIL_LINUX_FALLOCATE bool "fallocate" + depends on !BR2_avr32 # fallocate not implemented help Preallocate space to a fileSituation is a bit fuzzy here.
We have added a patch to uClibc that implements fallocate support:
package/uclibc/0.9.33.2/uclibc-0041-libc-add-posix_fallocate.patch. So internal toolchains based on 0.9.33.2 should now have fallocate support.However:
* The AVR32 toolchain used in the autobuilders predates the addition of this patch, and therefore does not have the fallocate support (the autobuilders uses a Buildroot generated toolchain, but generated with Buildroot 2013.05).
* The AVR32 support at the moment is using 0.9.33.2, but you told us that 0.9.33.2 is basically not working properly on AVR32, and that reverting to 0.9.31 was the only solution to get a working AVR32 system. This would indeed mean that fallocate support would not be available on AVR32 (but it would more be related to the uClibc version rather than the architecture).
* A larger problem that I have already raised several times is that adding feature patches to the uClibc package in Buildroot is causing issues with external toolchain support for uClibc toolchains. These external toolchains are very unlikely to carry the same backported feature patches as we do, and therefore the build will break with those external toolchains if Buildroot relies on uClibc having those features.
Quoted 2 lines
I'm Cc'ing Arnout, Peter, Yann and Thomas DS on this one, because we really need to define a policy on this topic.
Our stance has always been 'no feature-patch in Buildroot'. OTOH, I can understand that fallocate is really required (being in POSIX).
But since uClibc is highly configurable, it could happen that an external toolchain would have fallocate disabled (being in Advanced RT in POSIX).
So, I'm a bit fuzzy as to what we should do here.
The best approach would be to push all of our changes upstream uClibc, and hope for a release soon, so we can bump. But it looks like upstream is not really alive those days.
Another approach would be to add yet one more toolchain knob that tells whether the toolchain has fallocate (defaults to 'y' for (e)glibc and internal, prompts for external uClibc).
My preference would be to remove feature-patches, but that is really gonna hurt newcomers (and may bite long-timers as well).
In the end, I'm not much of any help on that one, sorry... :-(
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 util-linux: disable fallocate for avr32
Dear Yann E. MORIN,
Quoted 10 lines · Yann E. MORIN
Quoted 2 lines
I'm Cc'ing Arnout, Peter, Yann and Thomas DS on this one, because we really need to define a policy on this topic.
Our stance has always been 'no feature-patch in Buildroot'. OTOH, I can understand that fallocate is really required (being in POSIX).
But since uClibc is highly configurable, it could happen that an external toolchain would have fallocate disabled (being in Advanced RT in POSIX).
True, but our position on the matter has more or less always been: the external uClibc toolchain should have a uClibc configuration similar to the one we have in Buildroot. We cannot support any random uClibc configuration.
But it's hard to require external toolchains to have uClibc features that are not even part of a uClibc stable release.
Quoted 5 lines
So, I'm a bit fuzzy as to what we should do here.
The best approach would be to push all of our changes upstream uClibc, and hope for a release soon, so we can bump. But it looks like upstream is not really alive those days.
All the feature patches we have for uClibc are already upstream: they are precisely backported from upstream... waiting for an upstream release to occur.
Quoted 3 lines
Another approach would be to add yet one more toolchain knob that tells whether the toolchain has fallocate (defaults to 'y' for (e)glibc and internal, prompts for external uClibc).
True, but that doesn't scale really nicely to the crazy number of features. For example, systemd needs execvpe(), which is not in uClibc 0.9.33, but is available in our uClibc thanks to a backported patch. Should we also add another config know for execvpe() ?
Quoted 2 lines
My preference would be to remove feature-patches, but that is really gonna hurt newcomers (and may bite long-timers as well).
I believe the only reasonable solutions are (alternatively, and the choice can be made differently per-package) :
(1) Add patches to the package to avoid usage of unimplemented uClibc features (when possible)
(2) Mark the packages as depends on !UCLIBC
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 util-linux: disable fallocate for avr32
Quoted 4 lines · Thomas Petazzoni
Dear Yann E. MORIN,
On Sun, 3 Nov 2013 12:06:13 +0100, Yann E. MORIN wrote:
[snip]
Quoted 10 lines
Quoted 2 lines
My preference would be to remove feature-patches, but that is really gonna hurt newcomers (and may bite long-timers as well).
I believe the only reasonable solutions are (alternatively, and the choice can be made differently per-package) :
(1) Add patches to the package to avoid usage of unimplemented uClibc features (when possible)
(2) Mark the packages as depends on !UCLIBC
If I may throw in yet another alternative: depend on a version of
uClibc. We can call our patched uClibc version 0.9.34. At least, this still applies when there's a finally a uClibc release: we would then need a mechanism to mark a package to depend on the new uClibc.
On second thought, this is probably still difficult to maintain and
equally difficult for user to use a buildroot-generated toolchain as an external toolchain.
Regards,
Arnout
Quoted 5 lines
Best regards,
Thomas
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH 1/1 util-linux: disable fallocate for avr32
In reply to spdawson at gmail.comQuoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"spdawson" == spdawson <[email protected]> writes:
From: Simon Dawson <[email protected]>
The fallocate syscall is not implemented in the avr32 toolchain.Fixes build failures such as the following.
http://autobuild.buildroot.net/results/bc4/bc41a3fea20181526eb247ac910244aa2aa4c4c0/
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard