Skip to contentSkip to conversation

toolchain/crosstool-NG: fixes before release, v2

PATCH New Yann E. MORIN 2 participants 12 messages Nov 27, 2010

lore
Share & tools
lore
#0 lore raw

cover toolchain/crosstool-NG: fixes before release, v2

Hello All!

This patch series enables building on a minimalistic host (patch 1, tested in the same mini-environemnt as Thomas), adds some infrastructure (patches 2-5) to be able to push Buildroot options down to uClibc's config (patches 6-10).

Changes since v1:
- use order-only dependencies on host tools

[PATCH 01/10] toolchain/crosstool-NG: add dependencies on host- tools [PATCH 02/10] toolchain/crosstool-NG: reorder sed expressions [PATCH 03/10] toolchain/crosstool-NG: use a copy of the uClibc .config [PATCH 04/10] toolchain/crosstool-NG: move munging functions [PATCH 05/10] toolchain/crosstool-NG: add C library config munging [PATCH 06/10] toolchain/crosstool-NG: use wide-char option [PATCH 07/10] toolchain/crosstool-NG: use locales option [PATCH 08/10] toolchain/crosstool-NG: use LFS option
[PATCH 09/10] toolchain/crosstool-NG: use IPv6 option [PATCH 10/10] toolchain/crosstool-NG: use RPC option

 toolchain/toolchain-crosstool-ng/001-no-cvs.patch |   15 ++
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk  |  146 ++++++++++++++++-----
 2 files changed, 127 insertions(+), 34 deletions(-)

Regards,
Yann E. MORIN.

#1 lore raw

PATCH 1/10 toolchain/crosstool-NG: add dependencies on host- tools

Depends on:
- GNU awk --> host-gawk
- GNU automake --> host-automake

Remove dependency on 'cvs'. cvs is used to retrieve newlib, which is not supported under Buildroot.

---
 toolchain/toolchain-crosstool-ng/001-no-cvs.patch |   15 +++++++++++++++
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk  |   10 +++++++++-
 2 files changed, 24 insertions(+), 1 deletions(-)
 create mode 100644 toolchain/toolchain-crosstool-ng/001-no-cvs.patch
toolchain/toolchain-crosstool-ng/001-no-cvs.patch new file +15 -0
new file mode 100644
index 0000000..fd805d3
@@ -0,0 +1,15 @@
+Remove dependency on cvs.
+
+cvs is used to retrieve newlib, which is not supported
+under Buildroot, so cvs is not required.
+
+--- crosstool-ng-1.8.0/configure.orig	2010-11-27 15:43:52.000000000 +0000
++++ crosstool-ng-1.8.0/configure	2010-11-27 15:44:10.000000000 +0000
+@@ -359,7 +359,6 @@
+              err="'libtool' 1.5.26 or above was not found"
+ has_or_abort prog=stat
+ has_or_abort prog="aria2c curl wget"
+-has_or_abort prog=cvs
+ has_or_abort prog=patch
+ has_or_abort prog=tar
+ has_or_abort prog=gzip
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +9 -1
index 0812216..9a9f272 100644
@@ -267,8 +267,16 @@ $(CTNG_DIR)/.patched: $(CTNG_DIR)/.unpacked
 	                              \*.patch.$(ARCH)
 	$(Q)touch $@
 
+# Use order-only dependencies on host-* as they
+# are virtual targets with no rules, and so are
+# considered always remade. But we do not want
+# to reconfigure and rebuild ct-ng every time
+# we need to run it...
+$(CTNG_DIR)/.configured: | host-gawk        \
+                           host-automake
+
 $(CTNG_DIR)/.configured: $(CTNG_DIR)/.patched
-	$(Q)cd $(CTNG_DIR) && ./configure --local
+	$(Q)cd $(CTNG_DIR) && PATH=$(HOST_PATH) ./configure --local
 	$(Q)touch $@
 
 $(CTNG_DIR)/ct-ng: $(CTNG_DIR)/.configured
Signature · 1 line
1.7.1
#2 lore raw

PATCH 2/10 toolchain/crosstool-NG: reorder sed expressions

In reply to Yann E. MORIN
---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +17 -3
index 9a9f272..4040dcd 100644
@@ -85,6 +85,15 @@ $(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/.config
 #-----------------------------------------------------------------------------
 # Configuring the toolchain
 
+#--------------
+# We push BR options down to CT-NG, munging the default configuration
+# with sed expressions.
+# - first one for non-path options
+# - second for path options (because they have no prompt, they
+#                            always get set to the default value)
+CTNG_FIX_DOT_CONFIG_SED       :=
+CTNG_FIX_DOT_CONFIG_PATHS_SED :=
+
 # Note: a lot of the following tricks would become unneeded if one day
 # buildroot and crosstool-NG had matching options, especially for the
 # target description: arch name, bitness, endianness...
@@ -151,8 +160,6 @@ endif
 # with BR2 config options.
 # Known missing: arch variant & options, floating point (HW/SW), uClibc/eglibc config...
 #
-
-CTNG_FIX_DOT_CONFIG_SED :=
 CTNG_FIX_DOT_CONFIG_SED += s:^(CT_INSTALL_DIR_RO)=y:\# \1 is not set:;
 CTNG_FIX_DOT_CONFIG_SED += s:^(|\# )(CT_ARCH_[BL]E).*:\# \2 is not set:;
 CTNG_FIX_DOT_CONFIG_SED += s:^\# (CT_ARCH_$(CTNG_ENDIAN)) is not set:\1=y:;
@@ -173,10 +180,12 @@ endif
 
 #--------------
 # And the specials for paths
-CTNG_FIX_DOT_CONFIG_PATHS_SED :=
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_PREFIX_DIR)=.*:\1="$(TOOLCHAIN_DIR)":;
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LOCAL_TARBALLS_DIR)=.*:\1="$(DL_DIR)":;
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_SYSROOT_DIR_PREFIX)=.*:\1="":;
+
+#--------------
+# uClibc specific options
 ifeq ($(BR2_TOOLCHAIN_CTNG_uClibc),y)
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_UCLIBC_CONFIG_FILE)":;
 endif
@@ -230,9 +239,14 @@ endef
 # Depends on top-level .config because it has options we have to shoe-horn
 # into crosstool-NG's .config
 # Only copy the original .config file if we don't have one already
+# We need to call oldconfig twice in a row to ensure the options
+# are correctly set ( eg. if an option is new, then the initial sed
+# can't do anything about it ) Ideally, this should go in oldconfig
+# itself, but it's much easier to handle here.
 $(CTNG_DIR)/.config: $(CTNG_CONFIG_FILE) $(CTNG_DIR)/ct-ng $(CONFIG_DIR)/.config
 	$(Q)[ -f $@ ] && cp -a $@ [email protected] || cp -f $< $@
 	$(call ctng-oldconfig,$@)
+	$(call ctng-oldconfig,$@)
 	$(call ctng-check-config-changed,$@,[email protected])
 	$(Q)rm -f [email protected]
 
Signature · 1 line
1.7.1
#3 lore raw

PATCH 3/10 toolchain/crosstool-NG: use a copy of the uClibc .config

In reply to Yann E. MORIN

Before we can munge the uClibc .config file, we have to use a copy.

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |   16 ++++++++++++++--
 1 files changed, 14 insertions(+), 2 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +14 -2
index 4040dcd..b92aed0 100644
@@ -76,6 +76,8 @@ $(STAMP_DIR)/ct-ng-toolchain-installed: $(STAMP_DIR)/ct-ng-toolchain-built
 
 #-----------------------------------------------------------------------------
 # Building the toolchain
+# Note: $(STAMP_DIR)/ct-ng-toolchain-built can have more dependencies,
+#       depending on the selected C library. Those deps are added later
 
 $(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/.config
 	$(Q)$(call ctng,build.$(BR2_JLEVEL))
@@ -187,8 +189,18 @@ CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_SYSROOT_DIR_PREFIX)=.*:\1="":;
 #--------------
 # uClibc specific options
 ifeq ($(BR2_TOOLCHAIN_CTNG_uClibc),y)
-CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_UCLIBC_CONFIG_FILE)":;
-endif
+
+# Instruct CT-NG's .config where to find the uClibc's .config
+CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_DIR)/libc.config":;
+
+# And add this to the toolchain build dependency
+$(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/libc.config
+
+# And here is how we get this uClibc's .config
+$(CTNG_DIR)/libc.config: $(CTNG_UCLIBC_CONFIG_FILE)
+	$(Q)cp -f $< $@
+
+endif # LIBC is uClibc
 
 #--------------
 # Small functions to shoe-horn the above into crosstool-NG's .config
Signature · 1 line
1.7.1
#4 lore raw

PATCH 4/10 toolchain/crosstool-NG: move munging functions

In reply to Yann E. MORIN
---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |   62 ++++++++++++----------
 1 files changed, 34 insertions(+), 28 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +34 -28
index b92aed0..48116af 100644
@@ -96,15 +96,46 @@ $(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/.config
 CTNG_FIX_DOT_CONFIG_SED       :=
 CTNG_FIX_DOT_CONFIG_PATHS_SED :=
 
+#--------------
+# A few generic functions
+
+# Munge a config file, given a sed expression
+# $1: the .config file to munge
+# $2: the sed expression to apply
+define ctng-fix-dot-config
+	$(Q)sed -r -e '$(2)' $(1) >$(1).sed
+	$(Q)cmp $(1) $(1).sed >/dev/null 2>&1 && rm -f $(1).sed || mv -f $(1).sed $(1)
+endef
+
+# This function checks the .config did actually change
+# If not changed, then current .config will be touched with reference to the
+# stamp file. If the configuration did change, nothing is done.
+# $1: the current .config to check
+# $2: the time-stamped .config file
+define ctng-check-config-changed
+	$(Q)old_md5="$$( grep -v -E '^(#|$$)' $(2) 2>/dev/null  \
+	                 |md5sum                                \
+	                 |cut -d ' ' -f 1                       \
+	               )";                                      \
+	    new_md5="$$( grep -v -E '^(#|$$)' $(1) 2>/dev/null  \
+	                 |md5sum                                \
+	                 |cut -d ' ' -f 1                       \
+	               )";                                      \
+	    if [ $${old_md5} = $${new_md5} -a -f $(2) ]; then   \
+	        touch -r $(2) $(1);                             \
+	    fi
+endef
+
+#--------------
+# Massage BR2_ARCH so that it matches CT-NG's ARCH
+#
 # Note: a lot of the following tricks would become unneeded if one day
 # buildroot and crosstool-NG had matching options, especially for the
 # target description: arch name, bitness, endianness...
-
+#
 # Note-2: missing conformity check between BR's .config and libc features.
 # Use check_uclibc or check_glibc.
 
-#--------------
-# Massage BR2_ARCH so that it matches CT-NG's ARCH
 # Defaults:
 CTNG_ARCH   := $(CTNG_BR2_ARCH)
 CTNG_ENDIAN :=
@@ -204,12 +235,6 @@ endif # LIBC is uClibc
 
 #--------------
 # Small functions to shoe-horn the above into crosstool-NG's .config
-# $1: the .config file to munge
-# $2: the sed expression to apply
-define ctng-fix-dot-config
-	$(Q)sed -r -e '$(2)' $(1) >$(1).sed
-	$(Q)cmp $(1) $(1).sed >/dev/null 2>&1 && rm -f $(1).sed || mv -f $(1).sed $(1)
-endef
 
 # Function to update the .config
 # We first munge the .config to shoe-horn defaults, then we push that unto
@@ -228,25 +253,6 @@ define ctng-oldconfig
 	$(call ctng-fix-dot-config,$(1),$(CTNG_FIX_DOT_CONFIG_PATHS_SED))
 endef
 
-# This function checks the confguration of the toolchain did actually change
-# If not changed, then current .config will be touched with reference to the
-# stamp file. If the configuration did change, nothing is done.
-# $1: the current .config to check
-# $2: the time-stamped .config file
-define ctng-check-config-changed
-	$(Q)old_md5="$$( grep -v -E '^(#|$$)' $(2) 2>/dev/null  \
-	                 |md5sum                                \
-	                 |cut -d ' ' -f 1                       \
-	               )";                                      \
-	    new_md5="$$( grep -v -E '^(#|$$)' $(1) 2>/dev/null  \
-	                 |md5sum                                \
-	                 |cut -d ' ' -f 1                       \
-	               )";                                      \
-	    if [ $${old_md5} = $${new_md5} -a -f $(2) ]; then   \
-	        touch -r $(2) $(1);                             \
-	    fi
-endef
-
 # Default configuration
 # Depends on top-level .config because it has options we have to shoe-horn
 # into crosstool-NG's .config
Signature · 1 line
1.7.1
#5 lore raw

PATCH 5/10 toolchain/crosstool-NG: add C library config munging

In reply to Yann E. MORIN

For some C libraries, it can be necessary to push the BR settings down to the libc configuration file. Prepare the infrastructure.

(Note: it will apply only to uClibc for now, and although eglibc can also be configured, it is not currently supported)

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +7 -1
index 48116af..25e12d2 100644
@@ -93,8 +93,10 @@ $(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/.config
 # - first one for non-path options
 # - second for path options (because they have no prompt, they
 #                            always get set to the default value)
+# - third for C library .config (if it has one, eg. uClibc)
 CTNG_FIX_DOT_CONFIG_SED       :=
 CTNG_FIX_DOT_CONFIG_PATHS_SED :=
+CTNG_FIX_DOT_CONFIG_LIBC_SED  :=
 
 #--------------
 # A few generic functions
@@ -228,8 +230,12 @@ CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_D
 $(STAMP_DIR)/ct-ng-toolchain-built: $(CTNG_DIR)/libc.config
 
 # And here is how we get this uClibc's .config
-$(CTNG_DIR)/libc.config: $(CTNG_UCLIBC_CONFIG_FILE)
+$(CTNG_DIR)/libc.config: $(CTNG_UCLIBC_CONFIG_FILE) $(CONFIG_DIR)/.config
+	-$(Q)cp -a $@ [email protected]
 	$(Q)cp -f $< $@
+	$(call ctng-fix-dot-config,$@,$(CTNG_FIX_DOT_CONFIG_LIBC_SED))
+	$(call ctng-check-config-changed,$@,[email protected])
+	$(Q)rm -f [email protected]
 
 endif # LIBC is uClibc
 
Signature · 1 line
1.7.1
#6 lore raw

PATCH 6/10 toolchain/crosstool-NG: use wide-char option

In reply to Yann E. MORIN

Push the wide-char options down to crosstool-NG config

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +7 -0
index 25e12d2..2281daf 100644
@@ -223,6 +223,13 @@ CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_SYSROOT_DIR_PREFIX)=.*:\1="":;
 # uClibc specific options
 ifeq ($(BR2_TOOLCHAIN_CTNG_uClibc),y)
 
+# Handle the wide-char option
+ifneq ($(call qstrip,$(BR2_USE_WCHAR)),)
+CTNG_FIX_DOT_CONFIG_SED += s:^\# (CT_LIBC_UCLIBC_WCHAR) is not set:\1=y:;
+else
+CTNG_FIX_DOT_CONFIG_SED += s:^(CT_LIBC_UCLIBC_WCHAR)=.*:\# \1 is not set:;
+endif
+
 # Instruct CT-NG's .config where to find the uClibc's .config
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_DIR)/libc.config":;
 
Signature · 1 line
1.7.1
#7 lore raw

PATCH 7/10 toolchain/crosstool-NG: use locales option

In reply to Yann E. MORIN

Push the locales option down to crosstool-NG config

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +8 -0
index 2281daf..e944b93 100644
@@ -223,6 +223,14 @@ CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_SYSROOT_DIR_PREFIX)=.*:\1="":;
 # uClibc specific options
 ifeq ($(BR2_TOOLCHAIN_CTNG_uClibc),y)
 
+# Handle the locales option
+ifneq ($(call qstrip,$(BR2_ENABLE_LOCALE)),)
+CTNG_FIX_DOT_CONFIG_SED += s:^\# (CT_LIBC_UCLIBC_LOCALES) is not set:\1=y\n\# CT_LIBC_UCLIBC_LOCALES_PREGEN_DATA is not set:;
+CTNG_FIX_DOT_CONFIG_SED += s:^(CT_LIBC_UCLIBC_LOCALES_PREGEN_DATA)=.*:\# \1 is not set:;
+else
+CTNG_FIX_DOT_CONFIG_SED += s:^(CT_LIBC_UCLIBC_LOCALES)=.*:\# \1 is not set:;
+endif
+
 # Handle the wide-char option
 ifneq ($(call qstrip,$(BR2_USE_WCHAR)),)
 CTNG_FIX_DOT_CONFIG_SED += s:^\# (CT_LIBC_UCLIBC_WCHAR) is not set:\1=y:;
Signature · 1 line
1.7.1
#8 lore raw

PATCH 8/10 toolchain/crosstool-NG: use LFS option

In reply to Yann E. MORIN

Push the LFS option down to uClibc config

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +7 -0
index e944b93..97224a1 100644
@@ -238,6 +238,13 @@ else
 CTNG_FIX_DOT_CONFIG_SED += s:^(CT_LIBC_UCLIBC_WCHAR)=.*:\# \1 is not set:;
 endif
 
+# Handle the LFS option
+ifneq ($(call qstrip,$(BR2_LARGEFILE)),)
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^\# (UCLIBC_HAS_LFS) is not set:\1=y:;
+else
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^(UCLIBC_HAS_LFS)=.*:\# \1 is not set:;
+endif
+
 # Instruct CT-NG's .config where to find the uClibc's .config
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_DIR)/libc.config":;
 
Signature · 1 line
1.7.1
#9 lore raw

PATCH 9/10 toolchain/crosstool-NG: use IPv6 option

In reply to Yann E. MORIN

Push the IPv6 option down to uClibc config

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +7 -0
index 97224a1..92ed932 100644
@@ -245,6 +245,13 @@ else
 CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^(UCLIBC_HAS_LFS)=.*:\# \1 is not set:;
 endif
 
+# Handle the IPv6 option
+ifneq ($(call qstrip,$(BR2_INET_IPV6)),)
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^\# (UCLIBC_HAS_IPV6) is not set:\1=y:;
+else
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^(UCLIBC_HAS_IPV6)=.*:\# \1 is not set:;
+endif
+
 # Instruct CT-NG's .config where to find the uClibc's .config
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_DIR)/libc.config":;
 
Signature · 1 line
1.7.1
#10 lore raw

PATCH 10/10 toolchain/crosstool-NG: use RPC option

In reply to Yann E. MORIN

Push the RPC option down to uClibc config

---
 toolchain/toolchain-crosstool-ng/crosstool-ng.mk |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)
toolchain/toolchain-crosstool-ng/crosstool-ng.mk +9 -0
index 92ed932..1e8fa7a 100644
@@ -252,6 +252,15 @@ else
 CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^(UCLIBC_HAS_IPV6)=.*:\# \1 is not set:;
 endif
 
+# Handle the RPC option
+ifneq ($(call qstrip,$(BR2_INET_RPC)),)
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^\# (UCLIBC_HAS_RPC) is not set:\1=y\nUCLIBC_HAS_FULL_RPC=y\nUCLIBC_HAS_REENTRANT_RPC=y:;
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^\# (UCLIBC_HAS_FULL_RPC) is not set:\1=y:;
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^\# (UCLIBC_HAS_REENTRANT_RPC) is not set:\1=y:;
+else
+CTNG_FIX_DOT_CONFIG_LIBC_SED += s:^(UCLIBC_HAS_RPC)=.*:\# \1 is not set:;
+endif
+
 # Instruct CT-NG's .config where to find the uClibc's .config
 CTNG_FIX_DOT_CONFIG_PATHS_SED += s:^(CT_LIBC_UCLIBC_CONFIG_FILE)=.*:\1="$(CTNG_DIR)/libc.config":;
 
Signature · 1 line
1.7.1
#11 lore raw

cover toolchain/crosstool-NG: fixes before release, v2

In reply to Yann E. MORIN
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Yann" == Yann E MORIN <[email protected]> writes:

Yann> Hello All!

Yann> This patch series enables building on a minimalistic host (patch Yann> 1, tested in the same mini-environemnt as Thomas), adds some Yann> infrastructure (patches 2-5) to be able to push Buildroot options Yann> down to uClibc's config (patches 6-10).

Committed, thanks!

Yann> Changes since v1:
Yann> - use order-only dependencies on host tools

Signature · 1 line
Bye, Peter Korsgaard