ARM: dts: pxa3xx: add gcu node
PATCH 1/1 ARM: dts: pxa3xx: add gcu node
Add a device node for hardware graphic acceleration.
--- arch/arm/boot/dts/pxa3xx.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/pxa3xx.dtsi +8 -0
@@ -300,4 +300,12 @@ clocks = <&clks CLK_OSTIMER>; status = "okay"; }; + + gcu: display-controller at 54000000 { + compatible = "marvell,pxa300-gcu"; + reg = <0x54000000 0x1000>; + interrupts = <39>; + clocks = <&clks CLK_PXA300_GCU>; + status = "disabled"; + }; };
Signature · 1 line
2.17.2
PATCH 1/1 ARM: dts: pxa3xx: add gcu node
Quoted 3 lines · Daniel Mack
Add a device node for hardware graphic acceleration.
Signed-off-by Daniel Mack <[email protected]>
Hi Daniel,
arch/arm/boot/dts/pxa3xx.dtsi line 305
Quoted 2 lines
arch/arm/boot/dts/pxa3xx.dtsi +2
-0+ gcu: display-controller at 54000000 { + compatible = "marvell,pxa300-gcu";
Isn't every IP devicetree entry supposed to have a documentation in Documentation/devicetree going along a definition in the .dtsi files ?
Cheers.
Signature · 1 line
Robert
PATCH 1/1 ARM: dts: pxa3xx: add gcu node
Hi Robert,
Quoted 11 lines · Robert Jarzmik
Quoted 3 lines · Daniel Mack
Add a device node for hardware graphic acceleration.
Signed-off-by Daniel Mack <[email protected]>Hi Daniel,
arch/arm/boot/dts/pxa3xx.dtsi line 305
Quoted 2 lines
arch/arm/boot/dts/pxa3xx.dtsi +2
-0+ gcu: display-controller at 54000000 { + compatible = "marvell,pxa300-gcu";Isn't every IP devicetree entry supposed to have a documentation in
Documentation/devicetreegoing along a definition in the .dtsi files ?
Ah, that's already there, see cf925575d292b.
I did that when I taught the driver DT probing.
Thanks,
Daniel
Robert Jarzmik
AppliedPATCH 1/1 ARM: dts: pxa3xx: add gcu node
Quoted 1 line · Daniel Mack
Ah, that's already there, see
cf925575d292b.
Applied to pxa/dt, thanks.
Cheers.
Signature · 1 line
Robert