ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
Subsystems (3)
PATCH 1/1 ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
On the CP modules we found on Armada 7K/8K, many IP block actually also need a "logical" clock (from the bus). This patch add them which allows to fix some issues hanging the kernel:
If Ethernet and sdhci driver are built as modules and sdhci was loaded first then the kernel hang.
Fixes bb16ea1742c8 ("mmc: sdhci-xenon: Fix clock resource by adding an
optional bus clock")
Cc stable at vger.kernel.org
Reported-by Riku Voipio <[email protected]>
Signed-off-by Gregory CLEMENT <[email protected]>
--- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 13 ++++++++----- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 9 ++++++--- 2 files changed, 14 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +8 -5
@@ -63,8 +63,10 @@ cpm_ethernet: ethernet at 0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; - clock-names = "pp_clk", "gop_clk", "mg_clk"; + clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, + <&cpm_clk 1 5>, <&cpm_clk 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk","axi_clk"; marvell,system-controller = <&cpm_syscon0>; status = "disabled"; dma-coherent;
@@ -155,7 +157,8 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; - clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>; + clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>, + <&cpm_clk 1 6>, <&cpm_clk 1 18>; status = "disabled"; };
@@ -338,8 +341,8 @@ compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&cpm_clk 1 4>; + clock-names = "core","axi"; + clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>; dma-coherent; status = "disabled"; };
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +6 -3
@@ -63,8 +63,10 @@ cps_ethernet: ethernet at 0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; - clock-names = "pp_clk", "gop_clk", "mg_clk"; + clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, + <&cps_clk 1 5>, <&cps_clk 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "axi_clk"; marvell,system-controller = <&cps_syscon0>; status = "disabled"; dma-coherent;
@@ -155,7 +157,8 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; - clocks = <&cps_clk 1 9>, <&cps_clk 1 5>; + clocks = <&cps_clk 1 9>, <&cps_clk 1 5>, + <&cps_clk 1 6>, <&cps_clk 1 18>; status = "disabled"; };
Signature · 1 line
2.15.1
PATCH 1/1 ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
Hi,
Quoted 4 lines · Gregory CLEMENT
On the CP modules we found on Armada 7K/8K, many IP block actually also need a "logical" clock (from the bus). This patch add them which allows to fix some issues hanging the kernel:
Quoted 8 lines
If Ethernet and sdhci driver are built as modules and sdhci was loaded first then the kernel hang.
Fixes bb16ea1742c8 ("mmc: sdhci-xenon: Fix clock resource by adding anoptional bus clock")
Cc stable at vger.kernel.orgReported-by Riku Voipio <[email protected]>Signed-off-by Gregory CLEMENT <[email protected]>
Applied on mvebu/fixes
Gregory
Quoted 78 lines
--- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 13 ++++++++----- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 9 ++++++--- 2 files changed, 14 insertions(+), 8 deletions(-)arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +8
-5@@ -63,8 +63,10 @@ cpm_ethernet: ethernet at 0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; - clock-names = "pp_clk", "gop_clk", "mg_clk"; + clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, + <&cpm_clk 1 5>, <&cpm_clk 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk","axi_clk"; marvell,system-controller = <&cpm_syscon0>; status = "disabled"; dma-coherent;@@ -155,7 +157,8 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; - clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>; + clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>, + <&cpm_clk 1 6>, <&cpm_clk 1 18>; status = "disabled"; };@@ -338,8 +341,8 @@ compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&cpm_clk 1 4>; + clock-names = "core","axi"; + clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>; dma-coherent; status = "disabled"; };arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +6
-3@@ -63,8 +63,10 @@ cps_ethernet: ethernet at 0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; - clock-names = "pp_clk", "gop_clk", "mg_clk"; + clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, + <&cps_clk 1 5>, <&cps_clk 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "axi_clk"; marvell,system-controller = <&cps_syscon0>; status = "disabled"; dma-coherent;@@ -155,7 +157,8 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; - clocks = <&cps_clk 1 9>, <&cps_clk 1 5>; + clocks = <&cps_clk 1 9>, <&cps_clk 1 5>, + <&cps_clk 1 6>, <&cps_clk 1 18>; status = "disabled"; };Signature · 7 lines
2.15.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com