fuse: when are release requests queued?
Subsystems (2)
Hello,
I am trying to debug a sporadic test failure in libfuse
(https://github.com/libfuse/libfuse/issues/157).
Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace? Is it possible that this is delayed until after the close() syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?
Looking at fs/fuse/file.c, it looks as if fuse_release() directly calls fuse_request_send_background() to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?
Furthermore, does the VFS call fuse_release() directly while handling the close() syscall, or does this happen asynchronously later on?
Thanks!
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 7 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?Furthermore, does the VFS call
fuse_release()directly while handling theclose()syscall, or does this happen asynchronously later on?
Does the comment in fuse_release_common (called by fuse_release) (Linux 4.4.0) answer this?
267 /*
268 * Normally this will send the RELEASE request, however if 269 * some asynchronous READ or WRITE requests are outstanding, 270 * the sending will be delayed. 271 * 272 * Make the release synchronous if this is a fuseblk mount, 273 * synchronous RELEASE is allowed (and desirable) in this case 274 * because the server can be trusted not to screw up. 275 */
Quoted 12 lines · David Butterfield
Quoted 7 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?Furthermore, does the VFS call
fuse_release()directly while handling theclose()syscall, or does this happen asynchronously later on?Does the comment in
fuse_release_common(called byfuse_release) (Linux 4.4.0) answer this?267 /*
Quoted 8 lines
268 * Normally this will send the RELEASE request, however if 269 * some asynchronous READ or WRITE requests are outstanding, 270 * the sending will be delayed. 271 * 272 * Make the release synchronous if this is a fuseblk mount, 273 * synchronous RELEASE is allowed (and desirable) in this case 274 * because the server can be trusted not to screw up. 275 */
It does give some indication, I'd rather have someone familiar with the actual code confirm this.
Specifically, this says that if async read()/write() requests are pending, the RELEASE will be delayed. But does this guarantee that that if there are no pending requests it will not be delayed? And how can there be a pending request if the file isn't open anymore?
Best,
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 21 lines · Nikolaus Rath
Quoted 11 lines · David Butterfield
Quoted 7 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?Furthermore, does the VFS call
fuse_release()directly while handling theclose()syscall, or does this happen asynchronously later on?Does the comment in
fuse_release_common(called byfuse_release) (Linux 4.4.0) answer this?267 /*
Quoted 8 lines
268 * Normally this will send the RELEASE request, however if 269 * some asynchronous READ or WRITE requests are outstanding, 270 * the sending will be delayed. 271 * 272 * Make the release synchronous if this is a fuseblk mount, 273 * synchronous RELEASE is allowed (and desirable) in this case 274 * because the server can be trusted not to screw up. 275 */
Quoted 6 lines
It does give some indication, I'd rather have someone familiar with the actual code confirm this.
Specifically, this says that if async read()/write() requests are pending, the RELEASE will be delayed. But does this guarantee that that if there are no pending requests it will not be delayed?
If nothing is pending, it will go to pending queue immediately. But this won't guarantee that the userspace fetches it before fuse_release() returns.
Quoted 2 lines
And how
can there be a pending request if the file isn't open anymore?
I think the comment tells us about pending request in general, not specifically for that given file.
Quoted 4 lines
Best,
-Nikolaus
Quoted 8 lines · Nikolaus Rath
Hello,
I am trying to debug a sporadic test failure in libfuse
(https://github.com/libfuse/libfuse/issues/157).Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it by fuse_dev_do_read().
Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?
I think it's possible. See how flush_bg_queue() do nothing if fc->active_background > fc->max_background.
Quoted 6 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?
Yes, but not for that given fuse_file that we're closing now.
Quoted 3 lines
Furthermore, does the VFS call
fuse_release()directly while handling theclose()syscall, or does this happen asynchronously later on?
It's called directly for well-behaved applications in well-controlled environment, but there are some exceptions. You may be interested to read https://sourceforge.net/p/fuse/mailman/message/32872225/
Quoted 5 lines
Thanks!
-Nikolaus
Hi Maxim,
Quoted 15 lines · Maxim Patlasov
Quoted 8 lines · Nikolaus Rath
Hello,
I am trying to debug a sporadic test failure in libfuse
(https://github.com/libfuse/libfuse/issues/157).Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().
Quoted 6 lines
Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.
Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into fuse_release()?
Quoted 6 lines
Quoted 4 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?Yes, but not for that given
fuse_filethat we're closing now.
I assume that a fuse_file refers to the (formerly) opened file, right? So e.g. a unlink() request for the same directly entry could still go through before RELEASE has been transferred to the pending queue?
Best,
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 20 lines · Nikolaus Rath
Hi Maxim,
Quoted 17 lines · Maxim Patlasov
Quoted 8 lines · Nikolaus Rath
Hello,
I am trying to debug a sporadic test failure in libfuse
(https://github.com/libfuse/libfuse/issues/157).Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?
Quoted 8 lines
Quoted 2 lines
I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into
fuse_release()?
schedule_timeout_interruptible(HZ). But it's better to instrument fuse userspace to postpone processing some i/o requests. Then you'll keep fc->active_background > fc->max_background for a while. During that period fuse_release may succeed with FUSE_RELEASE queued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.
Quoted 9 lines
Quoted 6 lines
Quoted 5 lines
Looking at
fs/fuse/file.c, it looks as iffuse_release()directly callsfuse_request_send_background()to send the request. But at that point I can no longer follow the code. Is it possible for another request to sneak in at this point?Yes, but not for that given
fuse_filethat we're closing now.I assume that a
fuse_filerefers to the (formerly) opened file, right? So e.g. aunlink()request for the same directly entry could still go through before RELEASE has been transferred to the pending queue?
Yes. But FUSE_UNLINK works on file path, it doesn't depend on fuse_file at all. Hence unlink request can go anytime.
Quoted 5 lines
Best,
-Nikolaus
Quoted 12 lines · Maxim Patlasov
Quoted 12 lines
Quoted 12 lines
Quoted 2 lines
Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.
Quoted 8 lines
Quoted 6 lines
Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into
fuse_release()?
schedule_timeout_interruptible(HZ).
Hmm. I made the following change in linux 4.10:
fs/fuse/file.c +3 -0
@@ -252,6 +252,9 @@ void fuse_release_common(struct file *file, int opcode)if (unlikely (!ff))return ; +// Wait a little to force race condition in userspace +schedule_timeout_interruptible (1 ); + req = ff->reserved_req;fuse_prepare_release (ff, file->f_flags, opcode);
But when doing e.g. "echo test > newfile", the RELEASE request still comes right away (judging from the libfuse debugging output).
Do I need to do something else?
Quoted 6 lines
But it's better to instrument fuse
userspace to postpone processing some i/o requests. Then you'll keepfc->active_background>fc->max_backgroundfor a while. During that periodfuse_releasemay succeed withFUSE_RELEASEqueued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.
I don't know.. why is this better? It seems a lot more complicated. I need to generate the extra request, add some switch to tell libfuse when to start processing again, synchronize this with sneaking in the other request...
Best,
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 36 lines · Nikolaus Rath
Quoted 11 lines · Maxim Patlasov
Quoted 11 lines
Quoted 11 lines
Quoted 2 lines
Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.Quoted 7 lines
Quoted 6 lines
Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into
fuse_release()?
schedule_timeout_interruptible(HZ).Hmm. I made the following change in linux 4.10:
fs/fuse/file.c +3
-0@@ -252,6 +252,9 @@ void fuse_release_common(struct file *file, int opcode)if (unlikely (!ff))return ; +// Wait a little to force race condition in userspace +schedule_timeout_interruptible (1 ); + req = ff->reserved_req;fuse_prepare_release (ff, file->f_flags, opcode);
Quoted 4 lines
But when doing e.g. "echo test > newfile", the RELEASE request still comes right away (judging from the libfuse debugging output).
Do I need to do something else?
Try HZ*10 instead of 1 as an argument of schedule_timeout_interruptible.
Quoted 11 lines
Quoted 7 lines
But it's better to instrument fuse
userspace to postpone processing some i/o requests. Then you'll keepfc->active_background>fc->max_backgroundfor a while. During that periodfuse_releasemay succeed withFUSE_RELEASEqueued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.I don't know.. why is this better? It seems a lot more complicated. I need to generate the extra request, add some switch to tell libfuse when to start processing again, synchronize this with sneaking in the other request...
I thought it's better because it would trigger delayed processing of FUSE_RELEASE: last __fput() succeeded, but fuse userspace will see FUSE_RELEASE only later. Adding sleep to fuse_release_common would only extend processing time of last __fput(), is that what you need?
Quoted 6 lines
Best,
-Nikolaus
Quoted 37 lines · Maxim Patlasov
Quoted 35 lines · Nikolaus Rath
Quoted 11 lines · Maxim Patlasov
Quoted 11 lines
Quoted 11 lines
Quoted 2 lines
Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.Quoted 7 lines
Quoted 6 lines
Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into
fuse_release()?
schedule_timeout_interruptible(HZ).Hmm. I made the following change in linux 4.10:
fs/fuse/file.c +2
-0@@ -252,6 +252,9 @@ void fuse_release_common(struct file *file, int opcode)if (unlikely (!ff))return ; +// Wait a little to force race condition in userspace +schedule_timeout_interruptible (1 ); + req = ff->reserved_req;fuse_prepare_release (ff, file->f_flags, opcode);
Quoted 7 lines
Quoted 4 lines
But when doing e.g. "echo test > newfile", the RELEASE request still comes right away (judging from the libfuse debugging output).
Do I need to do something else?
Try HZ*10 instead of 1 as an argument of
schedule_timeout_interruptible.
Ok, now the RELEASE comes a lot later. But now userspace is also blocking until RELEASE comes in.
Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
But it's better to instrument fuse
userspace to postpone processing some i/o requests. Then you'll keepfc->active_background>fc->max_backgroundfor a while. During that periodfuse_releasemay succeed withFUSE_RELEASEqueued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.I don't know.. why is this better? It seems a lot more complicated. I need to generate the extra request, add some switch to tell libfuse when to start processing again, synchronize this with sneaking in the other request...
Quoted 4 lines
I thought it's better because it would trigger delayed processing of
FUSE_RELEASE: last__fput()succeeded, but fuse userspace will seeFUSE_RELEASEonly later. Adding sleep tofuse_release_commonwould only extend processing time of last__fput(), is that what you need?
I do not fully understand the difference you describe. What I would like to construct is the following scenario:
1. Userspace calls close()
2. Userspace close() returns
3. Userspace calls unlink()
4. Userspace unlink() returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipe
What would be the simplest way to do that?
Thanks!
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«A message that is not in the archive (sent off-list or not yet received): 87inkgvmp0.fsf-Zv899e0YUSYPWKMTL/zdXNi2O/[email protected]
Won't unlink(2) block until the fuse server has responded? I'm pretty sure the close(2) should come back after the fuse server responds to FLUSH. It sounds like with your RELEASE delay in the kernel, you should get your steps as described buy step 4 and 5 must be swapped.
Regards,
Michael Theall
Quoted 91 lines · Nikolaus Rath
Quoted 4 lines · Maxim Patlasov
Quoted 2 lines · Nikolaus Rath
Quoted 1 line · Maxim Patlasov
Quoted 1 line
Quoted 1 line
Quoted 1 line
Can someone tell me at which point the fuse kernel module will send
a
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 1 line
RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 2 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned anduserspace has
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
submitted a different fuse request for the same fs?
I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put
into
Quoted 9 lines
fs/fuse/file.c void fuse_release_common(struct file *file, int
Quoted 9 lines
Quoted 2 lines
Quoted 1 line
fuse_release()?
schedule_timeout_interruptible(HZ).Hmm. I made the following change in linux 4.10:
fs/fuse/file.c +0
-0@@ -252,6 +252,9 @@ void fuse_release_common(struct file *file, intopcode)
Quoted 9 lines
Quoted 9 lines
fs/fuse/file.c +2
-0if (unlikely (!ff))return ; +// Wait a little to force race condition in userspace +schedule_timeout_interruptible (1 ); + req = ff->reserved_req;fuse_prepare_release (ff, file->f_flags, opcode);Quoted 7 lines
Quoted 4 lines
But when doing e.g. "echo test > newfile", the RELEASE request still comes right away (judging from the libfuse debugging output).
Do I need to do something else?
Try HZ*10 instead of 1 as an argument of
schedule_timeout_interruptible.Ok, now the RELEASE comes a lot later. But now userspace is also blocking until RELEASE comes in.
Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
But it's better to instrument fuse
userspace to postpone processing some i/o requests. Then you'll keepfc->active_background>fc->max_backgroundfor a while. During that periodfuse_releasemay succeed withFUSE_RELEASEqueued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.I don't know.. why is this better? It seems a lot more complicated. I need to generate the extra request, add some switch to tell libfuse when to start processing again, synchronize this with sneaking in the other request...
Quoted 4 lines
I thought it's better because it would trigger delayed processing of
FUSE_RELEASE: last__fput()succeeded, but fuse userspace will seeFUSE_RELEASEonly later. Adding sleep tofuse_release_commonwould only extend processing time of last__fput(), is that what you need?I do not fully understand the difference you describe. What I would like to construct is the following scenario:
1. Userspace calls
close()
2. Userspaceclose()returns
3. Userspace callsunlink()
4. Userspaceunlink()returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipeWhat would be the simplest way to do that?
Thanks!
-Nikolaus--
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F»Time flies like an arrow, fruit flies like a Banana.«
Quoted 8 lines
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
--
fuse-devel mailing list
To unsubscribe or subscribe, visit
https://lists.sourceforge.net/lists/listinfo/fuse-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Signature · 2 lines
fuse-devel mailing list To unsubscribe or subscribe, visit https://lists.sourceforge.net/lists/listinfo/fuse-devel
Quoted 10 lines · Michael Theall
Quoted 10 lines
I do not fully understand the difference you describe. What I would like to construct is the following scenario:
1. Userspace calls
close()
2. Userspaceclose()returns
3. Userspace callsunlink()
4. Userspaceunlink()returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipe
Quoted 3 lines
Quoted 2 lines
What would be the simplest way to do that?
Won't unlink(2) block until the fuse server has responded?
Yes, you are right. It should be:
1. Userspace calls close()
2. Userspace close() returns
3. Userspace calls unlink()
4. libfuse reads UNLINK request from kernel pipe
5. Userspace unlink() returns
6. libfuse reads RELEASE request from kernel pipe
Quoted 4 lines
I'm pretty sure
the close(2) should come back after the fuse server responds to FLUSH. It sounds like with your RELEASE delay in the kernel, you should get your steps as described buy step 4 and 5 must be swapped.
No, the delay comes in between (1) and (2).
Best,
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 38 lines · Nikolaus Rath
Quoted 37 lines · Maxim Patlasov
Quoted 35 lines · Nikolaus Rath
Quoted 11 lines · Maxim Patlasov
Quoted 11 lines
Quoted 11 lines
Quoted 2 lines
Can someone tell me at which point the fuse kernel module will send a RELEASE request to userspace?
Anytime after
fuse_release(). It only puts request to background queue. Later, the request will be transferred to pending queue. And later, the userspace will fetch it byfuse_dev_do_read().Quoted 3 lines
Is it possible that this is delayed until
after theclose()syscall for the last fd has returned and userspace has submitted a different fuse request for the same fs?I think it's possible. See how
flush_bg_queue()do nothing iffc->active_background>fc->max_background.Quoted 7 lines
Quoted 6 lines
Thanks Maxim! Not sure what I'd do with these issues without you :-).
Is there a way to deliberate trigger this behavior for debugging? For example, is there a kernel equivalent of sleep(1) that I could put into
fuse_release()?
schedule_timeout_interruptible(HZ).Hmm. I made the following change in linux 4.10:
fs/fuse/file.c +2
-0@@ -252,6 +252,9 @@ void fuse_release_common(struct file *file, int opcode)if (unlikely (!ff))return ; +// Wait a little to force race condition in userspace +schedule_timeout_interruptible (1 ); + req = ff->reserved_req;fuse_prepare_release (ff, file->f_flags, opcode);
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
But when doing e.g. "echo test > newfile", the RELEASE request still comes right away (judging from the libfuse debugging output).
Do I need to do something else?
Try HZ*10 instead of 1 as an argument of
schedule_timeout_interruptible.Ok, now the RELEASE comes a lot later. But now userspace is also blocking until RELEASE comes in.
That's exactly why I thought that adding sleep there wouldn't be very useful.
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
But it's better to instrument fuse
userspace to postpone processing some i/o requests. Then you'll keepfc->active_background>fc->max_backgroundfor a while. During that periodfuse_releasemay succeed withFUSE_RELEASEqueued, but not passed to the userspace. Then you cat try to sneak another request -- something not involving fuse background queue.Quoted 8 lines
Quoted 4 lines
I don't know.. why is this better? It seems a lot more complicated. I need to generate the extra request, add some switch to tell libfuse when to start processing again, synchronize this with sneaking in the other request...
I thought it's better because it would trigger delayed processing of
FUSE_RELEASE: last__fput()succeeded, but fuse userspace will seeFUSE_RELEASEonly later. Adding sleep tofuse_release_commonwould only extend processing time of last__fput(), is that what you need?I do not fully understand the difference you describe. What I would like to construct is the following scenario:
Quoted 8 lines
1. Userspace calls
close()
2. Userspaceclose()returns
3. Userspace callsunlink()
4. Userspaceunlink()returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipeWhat would be the simplest way to do that?
I would try to keep fc->active_background elevated somehow. For example you add sleep(1) for every incoming write request to libfuse and serialize processing them. Then you generate enough writes to achieve fc->max_background. If you call close() now, and if it really ends up in last __fput(), corresponding FUSE_RELEASE will sit in background queue for long while (as many seconds as # elements in the queue). But close() from your 2. will return much earlier because it doesn't wait for completion of FUSE_RELEASE. Hence unlink() might succeed.
Quoted 4 lines
Thanks!
-Nikolaus
Quoted 12 lines · Maxim Patlasov
Quoted 11 lines
I do not fully understand the difference you describe. What I would like to construct is the following scenario:
1. Userspace calls
close()
2. Userspaceclose()returns
3. Userspace callsunlink()
4. Userspaceunlink()returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipeWhat would be the simplest way to do that?
Quoted 9 lines
I would try to keep
fc->active_backgroundelevated somehow. For example you add sleep(1) for every incoming write request to libfuse and serialize processing them. Then you generate enough writes to achievefc->max_background. If you callclose()now, and if it really ends up in last__fput(), correspondingFUSE_RELEASEwill sit in background queue for long while (as many seconds as # elements in the queue). Butclose()from your 2. will return much earlier because it doesn't wait for completion ofFUSE_RELEASE. Henceunlink()might succeed.
Ah, got it now, thanks!
Wouldn't be a simpler solution be to just patch the kernel module to *always* put FUSE_RELEASE requests into the background queue, so that I don't have to manually keep fc->active_background elevated?
I just can't seem to find the code that does this check... I would expect it in fuse_file_put(), but the condition in there does not seem to look at the number of background requests at all.
Best,
-Nikolaus
Signature · 3 lines
GPG Fingerprint: ED31 791B 2C5C 1613 AF38 8B8A D113 FCAC 3C4E 599F
»Time flies like an arrow, fruit flies like a Banana.«Quoted 23 lines · Nikolaus Rath
Quoted 11 lines · Maxim Patlasov
Quoted 11 lines
I do not fully understand the difference you describe. What I would like to construct is the following scenario:
1. Userspace calls
close()
2. Userspaceclose()returns
3. Userspace callsunlink()
4. Userspaceunlink()returns
5. libfuse reads UNLINK request from kernel pipe
6. libfuse reads RELEASE request from kernel pipeWhat would be the simplest way to do that?
Quoted 9 lines
I would try to keep
fc->active_backgroundelevated somehow. For example you add sleep(1) for every incoming write request to libfuse and serialize processing them. Then you generate enough writes to achievefc->max_background. If you callclose()now, and if it really ends up in last__fput(), correspondingFUSE_RELEASEwill sit in background queue for long while (as many seconds as # elements in the queue). Butclose()from your 2. will return much earlier because it doesn't wait for completion ofFUSE_RELEASE. Henceunlink()might succeed.Ah, got it now, thanks!
Quoted 7 lines
Wouldn't be a simpler solution be to just patch the kernel module to *always* put
FUSE_RELEASErequests into the background queue, so that I don't have to manually keepfc->active_backgroundelevated?I just can't seem to find the code that does this check... I would expect it in
fuse_file_put(), but the condition in there does not seem to look at the number of background requests at all.
The decision is made at mount stage: it's either fuseblk mount or not. If it's not fuseblk mount, the kernel always put FUSE_RELEASE to background queue. And vice versa.
Keeping active_background elevated may help us to win the race: you want unlink is queued and processed before the userspace reads FUSE_RELEASE from kernel.
Quoted 5 lines
Best,
-Nikolaus