New PM branch: pm-20081006

Hello,

The latest PM branch, is now available in the linux-omap tree. The git-shortlog is below[1], but from a high level, this branch includes support for

- full-chip retention in dynamic idle
- full-chip retention in suspend
- full-chip OFF in dynamic idle
- full-chip OFF in suspend

The choice of retention versus off-mode can be selected using /sys/power/enable_off_mode (zero by default.)

Tested on 3430SDP.

To test:

# echo 1 > /sys/power/clocks_off_while_idle
# echo 1 > /sys/power/sleep_while_idle
# echo 1 > /sys/power/voltage_off_while_idle

and optionally for off-mode

# echo 1 > /sys/power/enable_off_mode

Kevin

[1] git shortlog:

Amit Kucheria (2): PM: Typo fix for clock_allow_idle HSMMC: Make
driver support dynamic idle

Kalle Jokiniemi (3):
OMAP3: Remove CONFIG_OMAP_SYSOFFMODE flag
OMAP: Sysfs interface for enabling voltage off in idle
OMAP3: OFF command integration

Kevin Hilman (5):
ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
PM: serial: ensure padconf wake-enable bits are set for UARTs
ARM: OMAP3: PM: allow runtime enable/disable of OFF mode
TEMP: Merge into IRQ save/restore patch
ARM: OMAP3: PM: remove unused 'context_mem' var from sleep34xx.S

Paul Walmsley (1):
OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer.

Rajendra Nayak (16):
OMAP3: Adds missing CM offset defs
OMAP3: GPMC context save/restore
OMAP3: Serial context save/restore
OMAP3: GPIO context save/restore
OMAP3: I2C context save/restore
OMAP3: INTC context save/restore
OMAP3: PRCM context save/restore
OMAP3: Populate scratchpad contents
OMAP3: SCM context save/restore
OMAP3: SRAM restore function
OMAP3: PER/NEON/CORE control in idle
OMAP3: Restore MMU table entry
OMAP3: MPU Off support
OMAP3: CORE Off support
OMAP3: Dynamic enable/disable of OFF support
OMAP3: 3430SDP minimal kernel defconfig

Tero Kristo (2):
PM: Added sleep support to UART
PM debug support for 34xx