Skip to contentSkip to conversation

oops on e4k5

DISCUSSION [email protected] 2 participants 2 messages Jul 21, 2006

lore
Share & tools
lore
#0 lore raw

The full output when switching the key to servicemode didnt show any problems.
Please find attached the full crash log with trace.

Regards Daniel

wuffmaster login:

               \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
Unable to handle kernel paging request at virtual address
              000000018da5e000

OOPS: Bogus kernel PC [fffff800066fc048] in fault handler tsk->{mm,active_mm}->context = 00000000000c0001 tsk->{mm,active_mm}->pgd = 0000000000050001
OOPS: Fault was to vaddr[fffff800066fc048]

loginin:  OOPS: Bogus kernel PC [02000000047857e4] in fault handler OOFatal Reset
0,0>FATAL ERROR
0,0> At time of error: System software was running.
0,0> Diagnosis: Board 6, software, any system board
0,0>Log Date: Jul 21 11:35:59 GMT 2006
0,0>
0,0>RESET INFO for CPU/Memory board in slot 6
0,0> AC ESR 00000000.00000022 INCWS UPA_B_ERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050030 LOC_FATAL SYNC BRD_LED_M BRD_LED_R
0,0> FHC RCSR 02000000 FATAL
0,0> Config policy change
0,1>
0,0>
0,1>@(#) POST 3.9.26 2000/05/09 19:13
0,0>@(#) POST 3.9.26 2000/05/09 19:13
0,1>Copyright 2000 Sun Microsystems, Inc. All rights reserved. 0,0>Copyright 2000 Sun Microsystems, Inc. All rights reserved.
0,1>
SelfTest Initializing (Diag Level 10, ENV 00000000) IMPL 0011 MASK a0 0,0>
SelfTest Initializing (Diag Level 10, ENV 0000ff01) IMPL 0011 MASK a0 0,0>Board 0 CPU FPROM Test
0,0>Board 0 Basic CPU Test
0,0> Set CPU UPA Config and Init SDB Data
0,0> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0
0,0>Board 0 MMU Enable Test

0,0>    DMMU Init

0,0>    IMMU Init

0,0>    Mapping Selftest Enabling MMUs

0,0>Board 0 Ecache Test
0,0> Ecache Probe
0,0> Ecache Tags
0,1>Board 0 CPU FPROM Test
0,1>Board 0 Basic CPU Test
0,1> Set CPU UPA Config and Init SDB Data
0,1> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0
0,1>Board 0 MMU Enable Test

0,1>    DMMU Init

0,1>    IMMU Init

0,1>    Mapping Selftest Enabling MMUs

0,1>Board 0 Ecache Test

0,1>    Ecache Probe

0,1>    Ecache Tags

0,0>    Ecache Quick Verify

0,1>    Ecache Quick Verify

0,0>    Ecache Init

0,1>    Ecache Init

0,0>    Ecache RAM

0,1>    Ecache RAM

0,0>    Ecache Address Line

0,0>    Configure Ecache Limit

0,0>Ecache Size = 00800000, Limited to 00800000
0,0>Board 0 FPU Functional Test
0,0> FPU Enable
0,0>Board 0 Board Master Select Test
0,0> Selecting a Board Master
0,1> Ecache Address Line
0,0>Board 0 FireHose Devices Test
0,1> Configure Ecache Limit
0,1>Ecache Size = 00800000, Limited to 00800000
0,1>Board 0 FPU Functional Test
0,1> FPU Enable
0,1>Board 0 Board Master Select Test
0,1> Selecting a Board Master
0,0>Board 0 Address Controller Test
0,0> AC Initialization
0,0> AC DTAG Init
0,0>Board 0 Dual Tags Test
0,0> AC DTAG Init
0,0>Board 0 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 0 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 0 Centerplane Test
0,0> Centerplane Join
0,0>Setting JTAG Master
0,0>Clear JTAG Master
0,0>Board 0 Setup Cache Size Test
0,0> Setting Up Cache Size
0,0>Board 0 System Master Select Test
0,0> Setting System Master
0,0>POST Master Selected (JTAG,CENTRAL)
0,0>Board 16 Clock Board Test
0,0> Clock Board Initialization
0,0> Clock Board Temperature Check
0,0>Board 16 Clock Board Serial Ports Test
0,0>Board 16 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>Board 0 System Board Probe Test

0,0>    Probing all CPU/Memory BDA

0,0>    Probing System Boards

0,0>    Probing CPU Module JTAG Rings

0,0>Setting System Clock Frequency
0,0> CPU Module mid 0 Checked in OK (speed code = 3)
0,0> CPU mid 1 Version=00170011.a0000507
0,0> CPU Module mid 1 Checked in OK (speed code = 3)
0,0> CPU mid 4 Version=00170011.a0000507
0,0> CPU Module mid 4 Checked in OK (speed code = 3)
0,0> CPU mid 5 Version=00170011.a0000507
0,0> CPU Module mid 5 Checked in OK (speed code = 3)
0,0> CPU mid 8 Version=00170011.a0000507
0,0> CPU Module mid 8 Checked in OK (speed code = 3)
0,0> CPU mid 9 Version=00170011.a0000507
0,0> CPU Module mid 9 Checked in OK (speed code = 3)
0,0> CPU mid 10 Version=00170011.a0000507
0,0> CPU Module mid 10 Checked in OK (speed code = 3)
0,0> CPU mid 11 Version=00170011.a0000507
0,0> CPU Module mid 11 Checked in OK (speed code = 3)
0,0> CPU mid 12 Version=00170011.a0000507
0,0> CPU Module mid 12 Checked in OK (speed code = 3)
0,0> CPU mid 13 Version=00170011.a0000507
0,0> CPU Module mid 13 Checked in OK (speed code = 3)
0,0>System Frequency (MHz),fcpu=400, fmod=200, fsys=100, fgen=400 0,0>TESTING BOARD 1
0,0>Board 1 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 1 Centerplane Test
0,0> Centerplane Check
0,0>Board 1 Address Controller Test
0,0> AC Initialization
0,0>Setting Freq to 25MHZ
0,0> AC DTAG Init
0,0>Board 1 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 1 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>TESTING BOARD 3
0,0>Board 3 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 3 Centerplane Test
0,0> Centerplane Check
0,0>Board 3 Address Controller Test
0,0> AC Initialization
0,0>Setting Freq to 25MHZ
0,0> AC DTAG Init
0,0>Board 3 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 3 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>Re-mapping to Local Device Space
0,0>Begin Central Space Serial Port access
0,0>Enable AC Control Parity
0,0>Hotplug Trigger Test
0,0>Init Counters for Hotplug
0,0>Board 0 Cross Calls Test
0,0>Board 0 Environmental Probe Test
0,0> Environmental Probe
0,0>Checking Power Supply Configuration
0,0>Power is more than adequate, load 7 ps 5
0,0>Reconfig memory due to FATAL RESET
0,0>Reconfig memory due to new CONFIG POLICY
0,0>Board 0 Probing Memory SIMMS Test
0,0> Probe SIMMID
0,0> Populated Memory Bank Status
0,0> bd # Size Address Way Status
0,0> 0 2048 Normal
0,0> 0 2048 Normal
0,0> 2 2048 Normal
0,0> 2 2048 Normal
0,0> 4 1024 Normal
0,0> 4 1024 Normal
0,0> 5 1024 Normal
0,0> 5 1024 Normal
0,0> 6 1024 Normal
0,0> 6 1024 Normal
0,0>Board 0 Memory Configuration Test
0,0> Memory Interleaving
0,0> Total banks with 8MB SIMMs = 0
0,0> Total banks with 32MB SIMMs = 0
0,0> Total banks with 128MB SIMMs = 6
0,0> Total banks with 256MB SIMMs = 4
0,0> Overall memory default speed = 60ns
0,0>Do OPTIMAL INTLV
0,0> Board 0 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 2 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 0 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 2 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 4 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 5 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 6 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 4 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 5 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 6 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Memory Refresh Enable
0,0>Board 0 SIMMs Test
0,0>TESTING IO BOARD 1
0,0>Board 1 I/O FPROM Test
0,0>@(#) iPOST 3.4.26 2000/05/09 19:11
0,0> TESTING IO BOARD 1 ASICs
0,0> TESTING SysIO Port 0
0,0>Board 1 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 1 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 1 OnBoard IO Chipset (SOC) Test
0,0> TESTING SysIO Port 1
0,0>Board 1 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 1 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 1 OnBoard IO Chipset (FEPS) Test
0,0>IO BOARD 1 TESTED
0,0>TESTING IO BOARD 3
0,0>Board 3 I/O FPROM Test
0,0>@(#) iPOST 3.4.26 2000/05/09 19:11
0,0> TESTING IO BOARD 3 ASICs
0,0> TESTING SysIO Port 0
0,0>Board 3 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 3 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 3 OnBoard IO Chipset (SOC) Test
0,0> TESTING SysIO Port 1
0,0>Board 3 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 3 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 3 OnBoard IO Chipset (FEPS) Test
0,0>IO BOARD 3 TESTED
0,0>Probing for Disk System boards
0,0>Board 0 System Interrupts Test
0,0>
0,0> System Board Status
0,0>-----------------------------------------------------------------
0,0> Slot Board Status Board Type Failures
0,0>-----------------------------------------------------------------

0,0>  0  | Normal         |+CPU/Memory  |

0,0>  1  | Normal         |+IO Type 4   |

0,0>  2  | Normal         |+CPU/Memory  |

0,0>  3  | Normal         |+IO Type 4   |

0,0>  4  | Normal         |+CPU/Memory  |

0,0>  5  | Normal         |+CPU/Memory  |

0,0>  6  | Normal         |+CPU/Memory  |

0,0>  7  | Normal         | Disk Board  |

0,0> 16  | Normal         | Clock Board |

0,0>----------------------------------------------------------------- 0,0>
0,0> CPU Module Status
0,0>-----------------------------------------------------------------
0,0> MID OK Cache Speed Version
0,0>-----------------------------------------------------------------

0,0>  0 | y | 8192  |  400  | 00170011.a0000507

0,0>  1 | y | 8192  |  400  | 00170011.a0000507

0,0>  4 | y | 8192  |  400  | 00170011.a0000507

0,0>  5 | y | 8192  |  400  | 00170011.a0000507

0,0>  8 | y | 8192  |  400  | 00170011.a0000507

0,0>  9 | y | 8192  |  400  | 00170011.a0000507

0,0> 10 | y | 8192  |  400  | 00170011.a0000507

0,0> 11 | y | 8192  |  400  | 00170011.a0000507

0,0> 12 | y | 8192  |  400  | 00170011.a0000507

0,0> 13 | y | 8192  |  400  | 00170011.a0000507

0,0>----------------------------------------------------------------- 0,0>System Frequency (MHz),fcpu=400, fmod=200, fsys=100, fgen=400
0,0> Populated Memory Bank Status
0,0> bd # Size Address Way Status
0,0> 0 2048 0 4 Normal
0,0> 0 2048 2 4 Normal
0,0> 2 2048 1 4 Normal
0,0> 2 2048 3 4 Normal
0,0> 4 1024 0 4 Normal
0,0> 4 1024 3 4 Normal
0,0> 5 1024 1 4 Normal
0,0> 5 1024 0 2 Normal
0,0> 6 1024 2 4 Normal
0,0> 6 1024 1 2 Normal
0,0>
0,0> Disk Board Status
0,0>-----------------------------------------------------------------
0,0>Slot Sckt0 Sckt1
0,0>-----------------------------------------------------------------
0,0> 7 Disk14 Disk15
0,0>
0,0>
0,0>
POST COMPLETE
0,0>Entering OBP
8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.26, 14336 MB memory installed, Serial #15059025. Copyright 2000 Sun Microsystems, Inc. All rights reserved Ethernet address 8:0:20:e5:c8:51, Host ID: 80e5c851.

root@wuffmaster:~# date
Fri Jul 21 21:06:58 CEST 2006
root@wuffmaster:~# 
root@wuffmaster:~# logout

Debian GNU/Linux 3.1 wuffmaster ttyS0

wuffmaster login: .  \|/ ____ \|/

              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
Unable to handle kernel paging request at virtual address 000000018da5e000

OOPS: Bogus kernel PC [fffff800066fc048] in fault handler tsk->{mm,active_mm}->context = 00000000000c0001 tsk->{mm,active_mm}->pgd = 0000000000050001
OOPS: Fault was to vaddr[fffff800066fc048]

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
Call Trace:
(0): Oops [#1]
 [0000000000441f0c] TSTATE: 0000004480f09607 TPC: 00000000007857e4 TNPC: 00000000007857e8 Y: 00000000    Not tainted
do_sparc64_fault+0x4ac/0x4e0
 [0000000000404ccc] TPC: <__down_read_trylock+0x0/0x30>
g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000000000 g3: 0000000000000000
g4: 00000000008d3400 g5: fffff800066fc000 g6: fffff8037fc30000 g7: 0000004480f09605
o0: 000000018da5e060 o1: 0000000000000113 o2: fffff8037fb8ec50 o3: 10021747adec732c
o4: 00000000183a211e o5: ffffffffbb3f434b sp: fffff8037fb8e3a1 ret_pc: 0000000000441b84
sparc64_realfault_common+0x10/0x20
 [000000000045ef50] RPC: <do_sparc64_fault+0x124/0x4e0>
l0: 0000000000000002 l1: 00000000008fde38 l2: 0000000000000002 l3: 000000018da5e000
l4: 000000018da5e000 l5: 0000000000000000 l6: 000000018da5e060 l7: 0000000000030001
i0: fffff8037fb8ed40 i1: 0000000000000009 i2: fffff8037fb8ee90 i3: 000000000000000b
i4: 0000000000892800 i5: fffff8037fc28f80 i6: fffff8037fb8e481 i7: 0000000000404ccc
run_timer_softirq+0x110/0x240
 [0000000000459f08] I7: <sparc64_realfault_common+0x10/0x20>
__do_softirq+0xc8/0x100
 [0000000000459f88] Instruction DUMP: 90100018  81c7e008  81e80000 <c2020000> 8e006001  80a1e000  06400007  92102000  cfe21001 
do_softirq+0x48/0x60
 [0000000000435524] <0>Kernel panic - not syncing: Attempted to kill the idle task!
smp_percpu_timer_interrupt+0xc4/0x160
 [00000000004109d4] <1>Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 00000000000c0001
tsk->{mm,active_mm}->pgd = 0000000000050001
tl0_irq14+0x14/0x20
 [00000000002e2808]               \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
(0): Oops [#2]
0x2e2808
TSTATE: 0000009980f09600 TPC: 0000000000786160 TNPC: 0000000000786164 Y: 00000000    Not tainted
Unable to handle kernel paging request at virtual address fffff800066fc048

tsk->{mm,active_mm}->context = 00000000000010d9
tsk->{mm,active_mm}->pgd = fffff80191476000
TPC: <_spin_lock+0x0/0x20>
g0: 3130303132656663 g1: 0000000000000000 g2: 0000000000000000 g3: 0000000000000000
g4: fffff8019b3f7c30 g5: fffff800066fc000 g6: fffff8037fc30000 g7: 00000000008d0a50
o0: 0000000000000000 o1: 0000000000933c38 o2: 00000000007ae69a o3: fffff8037fb8e6b0
o4: 0000000000000063 o5: 0000000000906800 sp: fffff8037fb8dbd1 ret_pc: 000000000045e664

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1(28277): Oops [#3]
RPC: <__mod_timer+0x84/0xe0>
l0: 0000000000000000 l1: 0000000000000000 l2: fffffffffffffffd l3: 0000000000829400
l4: 000000000000000f l5: 00000000008fe400 l6: 000000000080d000 l7: 0000000080009000
i0: 0000000000933c38 i1: 00000001006c85ea i2: ffffffffffffb396 i3: ffffffffffffb396
i4: 0000000000008000 i5: 000000000000070f i6: fffff8037fb8dca1 i7: 000000000063d5d4
I7: <do_unblank_screen+0xf4/0x180>
Instruction DUMP: 01000000 01000000 01000000 <c26a0000> 8143e00a 0ac040dd 01000000 81c3e008 01000000
TSTATE: 0000009111009606 TPC: fffff800066fc048 TNPC: fffff800066fc04c Y: 00000000 Not tainted

Kernel panic - not syncing: Attempted to kill the idle task!

TPC: <0xfffff800066fc048>
g0: 00000000005785b0 g1: fffff8037bd88298 g2: fffff8019b3f7c30 g3: fffff800066fc000
g4: fffff801fa236220 g5: fffff80005f5c000 g6: fffff8019b3f4000 g7: fffff8037fc18828
o0: 00de00000001002c o1: 000000000055aecc o2: 0000000000000018 o3: 000000000000000c
o4: 0000000070113f38 o5: fffff8037fc18810 sp: fffff8019b3f7381 ret_pc: 000000000045ef50
RPC: <run_timer_softirq+0x110/0x240>
l0: 0000000000000100 l1: fffff8037fc18000 l2: fffff800066fc048 l3: fffff8019b3f7c30
l4: 0000000000200200 l5: 0000000000892000 l6: 0000000000001018 l7: 0000000000001418
i0: 0000000000892190 i1: fffff8000682b6e0 i2: fffff8000682c9b0 i3: 0000000000000001
i4: 0000000000001c18 i5: 0000000000001818 i6: fffff8019b3f7461 i7: 0000000000459f08
I7: <__do_softirq+0xc8/0x100>
Caller[0000000000459f08]: __do_softirq+0xc8/0x100
Caller[0000000000459f88]: do_softirq+0x48/0x60
Caller[0000000000435524]: smp_percpu_timer_interrupt+0xc4/0x160
Caller[00000000004109d4]: tl0_irq14+0x14/0x20
Caller[00000000002e2808]: 0x2e2808
Instruction DUMP: 7bd88298 00000000 0000000d <fffff800> 066fc010 fffff800 066fc080 00de0000 0000082c

Kernel panic - not syncing: Aiee, killing interrupt handler!
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 000000000000165c
tsk->{mm,active_mm}->pgd = fffff801f719a000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

configure(29201): Oops [#4]
TSTATE: 0000004411f09604 TPC: 0000000000499298 TNPC: 000000000049929c Y: 00000000 Not tainted
TPC: <cache_alloc_refill+0x118/0x260>
g0: fffff8018e543ad0 g1: 0000000000000000 g2: 0000000000000077 g3: fffff80000030fc0
g4: fffff8031e33bb60 g5: fffff80005f2c000 g6: fffff8018e540000 g7: 0000000000100100
o0: fffff8037fcd39a0 o1: fffff8037fcd2000 o2: 0000000000000000 o3: fffff80205a9ab58
o4: fffff80205a9a948 o5: fffff8037fcd2030 sp: fffff8018e543371 ret_pc: 0000000000499254
RPC: <cache_alloc_refill+0xd4/0x260>
l0: fffff8037fcc1900 l1: fffff8037fcd2000 l2: 000000000000001b l3: fffff8037fcc1800
l4: fffff80000030fc0 l5: fffff80000031000 l6: 0000000000400400 l7: 0000000000200200
i0: fffff8000000f8c0 i1: 00000000000000d0 i2: 000000002454a347 i3: 0000000000000000
i4: fffff801823e0000 i5: fffff80000030fd0 i6: fffff8018e543431 i7: 0000000000499674
I7: <kmem_cache_alloc+0x54/0x80>
Caller[0000000000499674]: kmem_cache_alloc+0x54/0x80
Caller[00000000004526e0]: copy_process+0xaa0/0xc20
Caller[0000000000452924]: do_fork+0x44/0x1e0
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[00000000701638d0]: 0x701638d0
Instruction DUMP: 8f35b002 c25c4000 c270c000 <c6706008> c4046024 ce744000 80a0bfff 02400031 ee746008

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

configure(29201): Kernel bad sw trap 5 [#5]
TSTATE: 0000000080f09605 TPC: 0000000000612588 TNPC: 000000000061258c Y: 00000000 Not tainted
TPC: <memcpy+0x8/0x13c0>
g0: 3830303634376565 g1: fffff8037fcc1c18 g2: 000000000000000f g3: fffffffffffffff8
g4: fffff8031e33bb60 g5: fffff80005f2c000 g6: fffff8018e540000 g7: fffff80b7fcc1c18
o0: fffff8037fcc1c18 o1: fffff8037fcc1df8 o2: 00000007fffffe20 o3: fffff802058d11d8
o4: fffff801c970ef18 o5: 0000000000100100 sp: fffff8018e542ba1 ret_pc: 0000000000499acc
RPC: <kmem_cache_free+0x4c/0x80>
l0: 0000000000000000 l1: 0000000000810080 l2: 0000000000400400 l3: 0000000000895ac0
l4: 0000000000200200 l5: 0000000000800000 l6: fffff800067fa078 l7: fffff801f719a004
i0: fffff8037fcc1c00 i1: fffff801fc2fc7c8 i2: fffff80002fff4b8 i3: 0000000000000000
i4: 0000000000000000 i5: 0000000000000000 i6: fffff8018e542c61 i7: 000000000048a4b4
I7: <remove_vma+0x54/0x80>
Caller[000000000048a4b4]: remove_vma+0x54/0x80
Caller[000000000048c4c0]: exit_mmap+0xe0/0x160
Caller[0000000000451130]: mmput+0x30/0xe0
Caller[0000000000456d74]: do_exit+0x114/0x480
Caller[000000000041b904]: die_if_kernel+0x164/0x1c0
Caller[0000000000441708]: unhandled_fault+0xe8/0x100
Caller[0000000000441cbc]: do_sparc64_fault+0x25c/0x4e0
Caller[0000000000404ccc]: sparc64_realfault_common+0x10/0x20
Caller[0000000000499254]: cache_alloc_refill+0xd4/0x260
Caller[0000000000499674]: kmem_cache_alloc+0x54/0x80
Caller[00000000004526e0]: copy_process+0xaa0/0xc20
Caller[0000000000452924]: do_fork+0x44/0x1e0
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[00000000701638d0]: 0x701638d0
Instruction DUMP: 01000000 8532b01f 80a0a000 <93d03005> 98100008 80a2a000 026004d3 96120009 80a2a010 Fixing recursive fault but reboot is needed!

Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 000000000000164a
tsk->{mm,active_mm}->pgd = fffff801baea0000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

swapper(0): Oops [#6]
TSTATE: 0000001980f09607 TPC: 0000000000785f4c TNPC: 0000000000785f50 Y: 00000000 Not tainted
TPC: <_spin_lock_irqsave+0xc/0x40>
g0: 00000000008cf6e0 g1: 0000000000000009 g2: 0000000000000048 g3: fffff8037fc443e0
g4: fffff8037fcaeca0 g5: fffff80005f4c000 g6: fffff800003e4000 g7: 0000000000000009
o0: 0000000000000000 o1: fffff8000681cbb0 o2: 0000000000892000 o3: 10021747b1bd12cc
o4: 00000000183a211e o5: ffffffffbb3f434b sp: fffff800003e7141 ret_pc: 0000000000466c24
RPC: <__queue_work+0x4/0x60>
l0: 0000000000000080 l1: 00000000008fddf0 l2: fffff8020577f7b0 l3: fffff8000681cbf0
l4: fffff8000681cbb4 l5: 0000000000000002 l6: 00000000008cf6e0 l7: 0000000000000008
i0: 0000000000000009 i1: fffff8000681ce60 i2: fffff800003e7ac4 i3: 0000000000000008
i4: 0000000000892800 i5: fffff800080fc070 i6: fffff800003e7201 i7: 000000000045ef50
I7: <run_timer_softirq+0x110/0x240>
Caller[000000000045ef50]: run_timer_softirq+0x110/0x240
Caller[0000000000459f08]: __do_softirq+0xc8/0x100
Caller[0000000000459f88]: do_softirq+0x48/0x60
Caller[0000000000435524]: smp_percpu_timer_interrupt+0xc4/0x160
Caller[00000000004109d4]: tl0_irq14+0x14/0x20
Caller[00000000004179c8]: cpu_idle+0x28/0x60
Caller[0000000000435d3c]: after_lock_tlb+0x144/0x158
Caller[0000000000440214]: sunos_ioctl+0x1f4/0x500
Instruction DUMP: 82100008 91520000 9190200f <c6684000> 8143e00a 0ac0c132 01000000 81c3e008 01000000

Kernel panic - not syncing: Aiee, killing interrupt handler!
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1(29066): Kernel bad sw trap 5 [#7]
TSTATE: 0000000011f09600 TPC: 0000000000612588 TNPC: 000000000061258c Y: 00000000 Not tainted
TPC: <memcpy+0x8/0x13c0>
g0: fffff80182a572a1 g1: fffff8037fca2c18 g2: 000000000000000f g3: fffffffffffffff8
g4: fffff8020303af40 g5: fffff80005f54000 g6: fffff80182a54000 g7: fffff80b7fca2df0
o0: fffff8037fca2c18 o1: fffff8037fca2df8 o2: 00000007fffffff8 o3: fffff801f475ce68
o4: fffff800008b7318 o5: fffff800008b7318 sp: fffff80182a572d1 ret_pc: 0000000000499acc
RPC: <kmem_cache_free+0x4c/0x80>
l0: 0000000000000000 l1: fffff801f2ede388 l2: 0000000070908000 l3: 0000000070907fff
l4: ffffffffff800000 l5: 0000000000800000 l6: fffff80006822078 l7: fffff801ad4f4004
i0: fffff8037fca2c00 i1: fffff80205fcb168 i2: 0000000070908000 i3: 00000000ff000000
i4: 00000000ff000000 i5: 00000000ff000000 i6: fffff80182a57391 i7: 000000000048a4b4
I7: <remove_vma+0x54/0x80>
Caller[000000000048a4b4]: remove_vma+0x54/0x80
Caller[000000000048bccc]: remove_vma_list+0x6c/0xa0
Caller[000000000048c11c]: do_munmap+0x11c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[000000000035e2a8]: 0x35e2a8
Instruction DUMP: 01000000 8532b01f 80a0a000 <93d03005> 98100008 80a2a000 026004d3 96120009 80a2a010

Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000001569
tsk->{mm,active_mm}->pgd = fffff8018da5e000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1(29031): Oops [#8]
TSTATE: 0000001911f09606 TPC: 0000000000785f4c TNPC: 0000000000785f50 Y: 00000000 Not tainted
TPC: <_spin_lock_irqsave+0xc/0x40>
g0: fffff801fb46fc20 g1: 0000000000000002 g2: 0000000000000000 g3: fffff8037fc443e0
g4: fffff802fe760680 g5: fffff80005f04000 g6: fffff801fb46c000 g7: 0000000000000000
o0: 0000000000000000 o1: fffff800067d4bb0 o2: 0000000000892000 o3: 10021747c0857d58
o4: 00000000183a211e o5: ffffffffbb3f434b sp: fffff801fb46f2c1 ret_pc: 0000000000466c24
RPC: <__queue_work+0x4/0x60>
l0: 00000000705305d0 l1: 0000000000000000 l2: fffff8037c1da670 l3: fffff800067d4bf0
l4: fffff800067d4bb4 l5: 0000000000000002 l6: 000000000054b800 l7: 00000000ff6b22c8
i0: 0000000000000002 i1: fffff800067d4e60 i2: 000000000053e400 i3: 0000000000175b58
i4: 0000000000002400 i5: 0000000000907160 i6: fffff801fb46f381 i7: 000000000045ef50
I7: <run_timer_softirq+0x110/0x240>
Caller[000000000045ef50]: run_timer_softirq+0x110/0x240
Caller[0000000000459f08]: __do_softirq+0xc8/0x100
Caller[0000000000459f88]: do_softirq+0x48/0x60
Caller[0000000000435524]: smp_percpu_timer_interrupt+0xc4/0x160
Caller[00000000004109d4]: tl0_irq14+0x14/0x20
Caller[00000000001bce34]: 0x1bce34
Instruction DUMP: 82100008 91520000 9190200f <c6684000> 8143e00a 0ac0c132 01000000 81c3e008 01000000

Kernel panic - not syncing: Aiee, killing interrupt handler!
Unable to handle kernel paging request at virtual address 0000000000030000
tsk->{mm,active_mm}->context = 000000000000156c
tsk->{mm,active_mm}->pgd = fffff801adbf2000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1plus(29033): Oops [#9]
TSTATE: 0000000011009605 TPC: 0000000000613818 TNPC: 000000000061381c Y: 00001770 Not tainted
TPC: <memcpy+0x1298/0x13c0>
g0: fffff8037ddaa9e0 g1: 0000000000000006 g2: 0000000000000000 g3: fffff8037fc0bc00
g4: fffff8037ddaa9e0 g5: fffff80005f6c000 g6: fffff80189cd4000 g7: 0000000000000000
o0: 0000000000030001 o1: fffff802fe6c6f58 o2: 00000000000000a9 o3: 000007fd019690a9
o4: 0000000000030001 o5: 00000000000000ff sp: fffff80189cd7451 ret_pc: 000000000048bf18
RPC: <split_vma+0x38/0x120>
l0: 0000000000030001 l1: 000000007067d910 l2: 0000000004000000 l3: 0000000000000015
l4: 000000007030d9b1 l5: 0000000000000000 l6: 00000000006df980 l7: 0000000000000028
i0: fffffffffffffff4 i1: fffff802fe6c6f58 i2: 0000000070d02000 i3: 0000000000000000
i4: 0000000000001fff i5: fffff802fe68aa88 i6: fffff80189cd7511 i7: 000000000048c09c
I7: <do_munmap+0x9c/0x160>
Caller[000000000048c09c]: do_munmap+0x9c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[000000000044730c]: do_mathemu+0x320c/0x64a0
Instruction DUMP: 94228001 da0a4000 82a06001 <da2a400b> 184ffffd 92026001 9002400b 828a6007 12480006

Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 000000000000156c
tsk->{mm,active_mm}->pgd = fffff801adbf2000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1plus(29033): Oops [#10]
TSTATE: 0000009980f09606 TPC: 0000000000785f4c TNPC: 0000000000785f50 Y: 00001770 Not tainted
TPC: <_spin_lock_irqsave+0xc/0x40>
g0: 00000000007afbac g1: 00000000000002c1 g2: 000000000003c0a5 g3: ffffffffff9babf8
g4: fffff8037ddaa9e0 g5: fffff80005f6c000 g6: fffff80189cd4000 g7: 000000037e55f9b2
o0: 000000000000000f o1: fffff80189cd4008 o2: 0000000000000008 o3: 000000000000000a
o4: 0000000000000001 o5: fffff80189cd4000 sp: fffff80189cd6c71 ret_pc: 0000000000784038
RPC: <schedule+0x338/0x920>
l0: 0000000000000000 l1: 0000000000000009 l2: fffff8037ddaa9e0 l3: fffff8037fc134e0
l4: fffff8000683b6e0 l5: 00000000000002c1 l6: 0000000000645408 l7: fffff801fb97cae0
i0: 0000000000000001 i1: fffff801fb97cb40 i2: 00000000007a93f8 i3: fffff80189cd7830
i4: fffff80189cd7460 i5: 0000000000906800 i6: fffff80189cd6d31 i7: 0000000000785a80
I7: <rwsem_down_read_failed+0xe0/0x240>
Caller[0000000000785a80]: rwsem_down_read_failed+0xe0/0x240
Caller[00000000007857d4]: __down_read+0x34/0x44
Caller[0000000000456468]: exit_mm+0x28/0x100
Caller[0000000000456d74]: do_exit+0x114/0x480
Caller[000000000041b904]: die_if_kernel+0x164/0x1c0
Caller[0000000000441708]: unhandled_fault+0xe8/0x100
Caller[0000000000441cbc]: do_sparc64_fault+0x25c/0x4e0
Caller[0000000000404ccc]: sparc64_realfault_common+0x10/0x20
Caller[000000000048bf18]: split_vma+0x38/0x120
Caller[000000000048c09c]: do_munmap+0x9c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[000000000044730c]: do_mathemu+0x320c/0x64a0
Instruction DUMP: 82100008 91520000 9190200f <c6684000> 8143e00a 0ac0c132 01000000 81c3e008 01000000 Fixing recursive fault but reboot is needed!

Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 000000000000156c
tsk->{mm,active_mm}->pgd = fffff801adbf2000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1plus(29033): Oops [#11]
TSTATE: 0000004480f09606 TPC: 000000000044a624 TNPC: 000000000044a628 Y: 00001770 Not tainted
TPC: <dequeue_task+0x4/0xa0>
g0: 002e0b0070226010 g1: ffffffffffffffff g2: 0000000000000000 g3: 0000000000000000
g4: fffff8037ddaa9e0 g5: fffff80005f6c000 g6: fffff80189cd4000 g7: ffffffffffffffff
o0: 0000000000000030 o1: 0000000000000400 o2: 00000000007ae8f0 o3: fffff80189cd7038
o4: fffff80189cd6c80 o5: 0000000000906800 sp: fffff80189cd6571 ret_pc: 00000000008fe800
RPC: <0x8fe800>
l0: 00000000008fe4f1 l1: 00000000008fe8ef l2: 0000000000000010 l3: 0000000000829400
l4: 000000000084bc00 l5: 00000000008fe400 l6: 000000000080d000 l7: fffff801fb97cae0
i0: fffff8037ddaa9e0 i1: 0000000000000000 i2: ffffffffffffef38 i3: ffffffffffffef38
i4: 0000000000008000 i5: 0000000000001a79 i6: fffff80189cd6631 i7: 000000000044aa94
I7: <deactivate_task+0x14/0x40>
Caller[000000000044aa94]: deactivate_task+0x14/0x40
Caller[0000000000783e08]: schedule+0x108/0x920
Caller[0000000000457064]: do_exit+0x404/0x480
Caller[000000000041b904]: die_if_kernel+0x164/0x1c0
Caller[0000000000441708]: unhandled_fault+0xe8/0x100
Caller[0000000000441cbc]: do_sparc64_fault+0x25c/0x4e0
Caller[0000000000404ccc]: sparc64_realfault_common+0x10/0x20
Caller[0000000000784038]: schedule+0x338/0x920
Caller[0000000000785a80]: rwsem_down_read_failed+0xe0/0x240
Caller[00000000007857d4]: __down_read+0x34/0x44
Caller[0000000000456468]: exit_mm+0x28/0x100
Caller[0000000000456d74]: do_exit+0x114/0x480
Caller[000000000041b904]: die_if_kernel+0x164/0x1c0
Caller[0000000000441708]: unhandled_fault+0xe8/0x100
Caller[0000000000441cbc]: do_sparc64_fault+0x25c/0x4e0
Caller[0000000000404ccc]: sparc64_realfault_common+0x10/0x20
Caller[000000000048bf18]: split_vma+0x38/0x120
Caller[000000000048c09c]: do_munmap+0x9c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[000000000044730c]: do_mathemu+0x320c/0x64a0
Instruction DUMP: 01000000 01000000 9de3bf40 <c2064000> 8e062038 05001001 bb30b001 b8066008 8530b002 Fixing recursive fault but reboot is needed!

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

cc1plus(28313): Kernel bad sw trap 5 [#12]
TSTATE: 0000000011f09603 TPC: 0000000000612588 TNPC: 000000000061258c Y: 00000000 Not tainted
TPC: <memcpy+0x8/0x13c0>
g0: 0000000000002000 g1: fffff8037fcb8c18 g2: 000000000000000f g3: fffffffffffffff8
g4: fffff802050942c0 g5: fffff80005f44000 g6: fffff8018d118000 g7: fffff80b7fcb8c90
o0: fffff8037fcb8c18 o1: fffff8037fcb8df8 o2: 00000007fffffe98 o3: fffff801e9e608e8
o4: fffff80201fdac58 o5: fffff80201fdac58 sp: fffff8018d11b2d1 ret_pc: 0000000000499acc
RPC: <kmem_cache_free+0x4c/0x80>
l0: 0000000000000000 l1: fffff801a0c14394 l2: 000000007200c000 l3: 000000007200bfff
l4: ffffffffff800000 l5: 0000000000800000 l6: fffff80006812078 l7: fffff801ab874004
i0: fffff8037fcb8c00 i1: fffff801afa058f8 i2: 000000007200c000 i3: 00000000ff800000
i4: 00000000ff800000 i5: 00000000ff800000 i6: fffff8018d11b391 i7: 000000000048a4b4
I7: <remove_vma+0x54/0x80>
Caller[000000000048a4b4]: remove_vma+0x54/0x80
Caller[000000000048bccc]: remove_vma_list+0x6c/0xa0
Caller[000000000048c11c]: do_munmap+0x11c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[0000000000447334]: do_mathemu+0x3234/0x64a0
Instruction DUMP: 01000000 8532b01f 80a0a000 <93d03005> 98100008 80a2a000 026004d3 96120009 80a2a010 configure(29202): Kernel bad sw trap 5 [#13]
TSTATE: 0000000011f09601 TPC: 0000000000612588 TNPC: 000000000061258c Y: 00000000 Not tainted
TPC: <memcpy+0x8/0x13c0>
g0: 0000000044c12aa3 g1: fffff8037fccec18 g2: 000000000000000f g3: fffffffffffffff8
g4: fffff801f3dc1320 g5: fffff80005f24000 g6: fffff80183368000 g7: fffff80b7fccec90
o0: fffff8037fccec18 o1: fffff8037fccedf8 o2: 00000007fffffe98 o3: 00000000000001ff
o4: fffff802b7cd5cd8 o5: 0000000000100100 sp: fffff8018336b2d1 ret_pc: 0000000000499acc
RPC: <kmem_cache_free+0x4c/0x80>
l0: 0000000000000000 l1: fffff801ff30bf18 l2: 0000000000400400 l3: 0000000000895ac0
l4: 0000000000200200 l5: fffff800067f2078 l6: ffffffffffffffff l7: fffff80000000000
i0: fffff8037fccec00 i1: fffff801c970f008 i2: fffff800067f2090 i3: 0000000070062010
i4: 0000000000400000 i5: 0000000000000000 i6: fffff8018336b391 i7: 000000000048a4b4
I7: <remove_vma+0x54/0x80>
Caller[000000000048a4b4]: remove_vma+0x54/0x80
Caller[000000000048bccc]: remove_vma_list+0x6c/0xa0
Caller[000000000048c11c]: do_munmap+0x11c/0x160
Caller[000000000048c17c]: sys_munmap+0x1c/0x40
Caller[0000000000406bd4]: linux_sparc_syscall32+0x34/0x40
Caller[0000000070138f60]: 0x70138f60
Instruction DUMP: 01000000 8532b01f 80a0a000 <93d03005> 98100008 80a2a000 026004d3 96120009 80a2a010 Fatal Reset
0,0>FATAL ERROR
0,0> At time of error: System software was running.
0,0> Diagnosis: Board 5, software, any system board
0,0>Log Date: Jul 21 19:27:56 GMT 2006
0,0>
0,0>RESET INFO for CPU/Memory board in slot 5
0,0> AC ESR 00000000.00000021 INCWS UPA_A_ERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050030 LOC_FATAL SYNC BRD_LED_M BRD_LED_R
0,0> FHC RCSR 02000000 FATAL
0,1>
0,0> Config policy change
0,1>@(#) POST 3.9.26 2000/05/09 19:13
0,0>
0,1>Copyright 2000 Sun Microsystems, Inc. All rights reserved.
0,0>@(#) POST 3.9.26 2000/05/09 19:13
0,1>
SelfTest Initializing (Diag Level 10, ENV 00000000) IMPL 0011 MASK a0
0,0>Copyright 2000 Sun Microsystems, Inc. All rights reserved.
0,0>
SelfTest Initializing (Diag Level 10, ENV 0000ff01) IMPL 0011 MASK a0
0,0>Board 0 CPU FPROM Test
0,0>Board 0 Basic CPU Test
0,0> Set CPU UPA Config and Init SDB Data
0,0> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0
0,0>Board 0 MMU Enable Test

0,0>    DMMU Init

0,0>    IMMU Init

0,0>    Mapping Selftest Enabling MMUs

0,1>Board 0 CPU FPROM Test

0,0>Board 0 Ecache Test

0,1>Board 0 Basic CPU Test

0,0>    Ecache Probe

0,1>    Set CPU UPA Config and Init SDB Data

0,0>    Ecache Tags

0,1>	SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0

0,1>Board 0 MMU Enable Test

0,1>    DMMU Init

0,1>    IMMU Init

0,1>    Mapping Selftest Enabling MMUs

0,1>Board 0 Ecache Test

0,1>    Ecache Probe

0,1>    Ecache Tags

0,0>    Ecache Quick Verify

0,1>    Ecache Quick Verify

0,0>    Ecache Init

0,1>    Ecache Init

0,0>    Ecache RAM

0,1>    Ecache RAM

0,0>    Ecache Address Line

0,0>    Configure Ecache Limit

0,0>Ecache Size = 00800000, Limited to 00800000
0,0>Board 0 FPU Functional Test
0,0> FPU Enable
0,1> Ecache Address Line
0,0>Board 0 Board Master Select Test
0,0> Selecting a Board Master
0,1> Configure Ecache Limit
0,0>Board 0 FireHose Devices Test
0,1>Ecache Size = 00800000, Limited to 00800000
0,1>Board 0 FPU Functional Test
0,1> FPU Enable
0,1>Board 0 Board Master Select Test
0,1> Selecting a Board Master
0,0>Board 0 Address Controller Test
0,0> AC Initialization
0,0> AC DTAG Init
0,0>Board 0 Dual Tags Test
0,0> AC DTAG Init
0,0>Board 0 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 0 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 0 Centerplane Test
0,0> Centerplane Join
0,0>Setting JTAG Master
0,0>Clear JTAG Master
0,0>Board 0 Setup Cache Size Test
0,0> Setting Up Cache Size
0,0>Board 0 System Master Select Test
0,0> Setting System Master
0,0>POST Master Selected (JTAG,CENTRAL)
0,0>Board 16 Clock Board Test
0,0> Clock Board Initialization
0,0> Clock Board Temperature Check
0,0>Board 16 Clock Board Serial Ports Test
0,0>Board 16 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>Board 0 System Board Probe Test

0,0>    Probing all CPU/Memory BDA

0,0>    Probing System Boards

0,0>    Probing CPU Module JTAG Rings

0,0>Setting System Clock Frequency
0,0> CPU Module mid 0 Checked in OK (speed code = 3)
0,0> CPU mid 1 Version=00170011.a0000507
0,0> CPU Module mid 1 Checked in OK (speed code = 3)
0,0> CPU mid 4 Version=00170011.a0000507
0,0> CPU Module mid 4 Checked in OK (speed code = 3)
0,0> CPU mid 5 Version=00170011.a0000507
0,0> CPU Module mid 5 Checked in OK (speed code = 3)
0,0> CPU mid 8 Version=00170011.a0000507
0,0> CPU Module mid 8 Checked in OK (speed code = 3)
0,0> CPU mid 9 Version=00170011.a0000507
0,0> CPU Module mid 9 Checked in OK (speed code = 3)
0,0> CPU mid 10 Version=00170011.a0000507
0,0> CPU Module mid 10 Checked in OK (speed code = 3)
0,0> CPU mid 11 Version=00170011.a0000507
0,0> CPU Module mid 11 Checked in OK (speed code = 3)
0,0> CPU mid 12 Version=00170011.a0000507
0,0> CPU Module mid 12 Checked in OK (speed code = 3)
0,0> CPU mid 13 Version=00170011.a0000507
0,0> CPU Module mid 13 Checked in OK (speed code = 3)
0,0>System Frequency (MHz),fcpu=400, fmod=200, fsys=100, fgen=400 0,0>TESTING BOARD 1
0,0>Board 1 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 1 Centerplane Test
0,0> Centerplane Check
0,0>Board 1 Address Controller Test
0,0> AC Initialization
0,0>Setting Freq to 25MHZ
0,0> AC DTAG Init
0,0>Board 1 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 1 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>TESTING BOARD 3
0,0>Board 3 JTAG Test
0,0> Verify System Board Scan Ring
0,0>Board 3 Centerplane Test
0,0> Centerplane Check
0,0>Board 3 Address Controller Test
0,0> AC Initialization
0,0>Setting Freq to 25MHZ
0,0> AC DTAG Init
0,0>Board 3 FireHose Controller Test
0,0> FHC Initialization
0,0>Board 3 NVRAM Devices Test
0,0> M48T59 (TOD) Init
0,0>Re-mapping to Local Device Space
0,0>Begin Central Space Serial Port access
0,0>Enable AC Control Parity
0,0>Hotplug Trigger Test
0,0>Init Counters for Hotplug
0,0>Board 0 Cross Calls Test
0,0>Board 0 Environmental Probe Test
0,0> Environmental Probe
0,0>Checking Power Supply Configuration
0,0>Power is more than adequate, load 7 ps 5
0,0>Reconfig memory due to FATAL RESET
0,0>Reconfig memory due to new CONFIG POLICY
0,0>Board 0 Probing Memory SIMMS Test
0,0> Probe SIMMID
0,0> Populated Memory Bank Status
0,0> bd # Size Address Way Status
0,0> 0 2048 Normal
0,0> 0 2048 Normal
0,0> 2 2048 Normal
0,0> 2 2048 Normal
0,0> 4 1024 Normal
0,0> 4 1024 Normal
0,0> 5 1024 Normal
0,0> 5 1024 Normal
0,0> 6 1024 Normal
0,0> 6 1024 Normal
0,0>Board 0 Memory Configuration Test
0,0> Memory Interleaving
0,0> Total banks with 8MB SIMMs = 0
0,0> Total banks with 32MB SIMMs = 0
0,0> Total banks with 128MB SIMMs = 6
0,0> Total banks with 256MB SIMMs = 4
0,0> Overall memory default speed = 60ns
0,0>Do OPTIMAL INTLV
0,0> Board 0 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 2 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 0 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 2 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 4 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 5 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 6 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 4 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 5 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Board 6 AC rev 5 RCTIME = 1 (Tras 71)
0,0> Memory Refresh Enable
0,0>Board 0 SIMMs Test
0,0>TESTING IO BOARD 1
0,0>Board 1 I/O FPROM Test
0,0>@(#) iPOST 3.4.26 2000/05/09 19:11
0,0> TESTING IO BOARD 1 ASICs
0,0> TESTING SysIO Port 0
0,0>Board 1 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 1 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 1 OnBoard IO Chipset (SOC) Test
0,0> TESTING SysIO Port 1
0,0>Board 1 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 1 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 1 OnBoard IO Chipset (FEPS) Test
0,0>IO BOARD 1 TESTED
0,0>TESTING IO BOARD 3
0,0>Board 3 I/O FPROM Test
0,0>@(#) iPOST 3.4.26 2000/05/09 19:11
0,0> TESTING IO BOARD 3 ASICs
0,0> TESTING SysIO Port 0
0,0>Board 3 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 3 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 3 OnBoard IO Chipset (SOC) Test
0,0> TESTING SysIO Port 1
0,0>Board 3 SysIO Registers Test
0,0> SysIO Register Initialization
0,0> SysIO RAM Initialization
0,0>Board 3 SysIO Functional Test
0,0> Clear Interrupt Map and State Registers
0,0>Board 3 OnBoard IO Chipset (FEPS) Test
0,0>IO BOARD 3 TESTED
0,0>Probing for Disk System boards
0,0>Board 0 System Interrupts Test
0,0>
0,0> System Board Status
0,0>-----------------------------------------------------------------
0,0> Slot Board Status Board Type Failures
0,0>-----------------------------------------------------------------

0,0>  0  | Normal         |+CPU/Memory  |

0,0>  1  | Normal         |+IO Type 4   |

0,0>  2  | Normal         |+CPU/Memory  |

0,0>  3  | Normal         |+IO Type 4   |

0,0>  4  | Normal         |+CPU/Memory  |

0,0>  5  | Normal         |+CPU/Memory  |

0,0>  6  | Normal         |+CPU/Memory  |

0,0>  7  | Normal         | Disk Board  |

0,0> 16  | Normal         | Clock Board |

0,0>----------------------------------------------------------------- 0,0>
0,0> CPU Module Status
0,0>-----------------------------------------------------------------
0,0> MID OK Cache Speed Version
0,0>-----------------------------------------------------------------

0,0>  0 | y | 8192  |  400  | 00170011.a0000507

0,0>  1 | y | 8192  |  400  | 00170011.a0000507

0,0>  4 | y | 8192  |  400  | 00170011.a0000507

0,0>  5 | y | 8192  |  400  | 00170011.a0000507

0,0>  8 | y | 8192  |  400  | 00170011.a0000507

0,0>  9 | y | 8192  |  400  | 00170011.a0000507

0,0> 10 | y | 8192  |  400  | 00170011.a0000507

0,0> 11 | y | 8192  |  400  | 00170011.a0000507

0,0> 12 | y | 8192  |  400  | 00170011.a0000507

0,0> 13 | y | 8192  |  400  | 00170011.a0000507

0,0>----------------------------------------------------------------- 0,0>System Frequency (MHz),fcpu=400, fmod=200, fsys=100, fgen=400
0,0> Populated Memory Bank Status
0,0> bd # Size Address Way Status
0,0> 0 2048 0 4 Normal
0,0> 0 2048 2 4 Normal
0,0> 2 2048 1 4 Normal
0,0> 2 2048 3 4 Normal
0,0> 4 1024 0 4 Normal
0,0> 4 1024 3 4 Normal
0,0> 5 1024 1 4 Normal
0,0> 5 1024 0 2 Normal
0,0> 6 1024 2 4 Normal
0,0> 6 1024 1 2 Normal
0,0>
0,0> Disk Board Status
0,0>-----------------------------------------------------------------
0,0>Slot Sckt0 Sckt1
0,0>-----------------------------------------------------------------
0,0> 7 Disk14 Disk15
0,0>
0,0>
0,0>
POST COMPLETE
0,0>Entering OBP
8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.26, 14336 MB memory installed, Serial #15059025. Copyright 2000 Sun Microsystems, Inc. All rights reserved Ethernet address 8:0:20:e5:c8:51, Host ID: 80e5c851.

Boot device: disk1 File and args:
SILO Version 1.4.9
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
\Uncompressing image... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Loaded kernel version 2.6.17

Remapping the kernel... done.
Booting Linux...
  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@   [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@  [@ PROMLIB: Sun IEEE Boot Prom 'OBP 3.2.26 2000/05/09 19:07'
PROMLIB: Root node compatible:
Linux version 2.6.17.6 (root@wuffmaster) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Sun Jul 16 12:05:21 UTC 2006
ARCH: SUN4U
Ethernet address: 08:00:20:e5:c8:51
CENTRAL: Detected 8 slot Enterprise system. cfreg[68] cver[78]
FHC(board 1): Version[1] PartID[fa0] Manuf[3e] (CENTRAL)
FHC(board 0): Version[1] PartID[fa0] Manuf[3e] (JTAG Master)
FHC(board 2): Version[1] PartID[fa0] Manuf[3e]
FHC(board 4): Version[1] PartID[fa0] Manuf[3e]
FHC(board 5): Version[1] PartID[fa0] Manuf[3e]
FHC(board 6): Version[1] PartID[fa0] Manuf[3e]
FHC(board 1): Version[1] PartID[fa0] Manuf[3e]
FHC(board 3): Version[1] PartID[fa0] Manuf[3e]
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
Memory: 14535648k available (3600k kernel code, 1088k data, 200k init) [fffff80000000000,000000037fd00000] Calibrating delay using timer specific routine.. 800.48 BogoMIPS (lpj=1600966)
Mount-cache hash table entries: 512
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
Using max_cache_size of 8MB
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600104)
CPU[1]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 1: synchronized TICK with master CPU (last diff -19 cycles,maxerr 726 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600112)
CPU[4]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 4: synchronized TICK with master CPU (last diff -16 cycles,maxerr 715 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600109)
CPU[5]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 5: synchronized TICK with master CPU (last diff -43 cycles,maxerr 706 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600118)
CPU[8]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 8: synchronized TICK with master CPU (last diff -40 cycles,maxerr 702 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600114)
CPU[9]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 9: synchronized TICK with master CPU (last diff -36 cycles,maxerr 688 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600112)
CPU[10]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 10: synchronized TICK with master CPU (last diff -36 cycles,maxerr 688 cycles)
Calibrating delay using timer specific routine.. 800.06 BogoMIPS (lpj=1600120)
CPU[11]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 11: synchronized TICK with master CPU (last diff -44 cycles,maxerr 708 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600114)
CPU[12]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 12: synchronized TICK with master CPU (last diff -20 cycles,maxerr 712 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600116)
CPU[13]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 13: synchronized TICK with master CPU (last diff -45 cycles,maxerr 708 cycles)
Brought up 10 CPUs
Total of 10 processors activated (8000.99 BogoMIPS).
migration_cost=174172
NET: Registered protocol family 16
PCI: Probing for controllers.
SCSI subsystem initialized
SYSIO: UPA portID 2, at 000001c400000000
sbus0: Clock 25.0 MHz
SYSIO: UPA portID 3, at 000001c600000000
sbus1: Clock 25.0 MHz
dma0: HME DVMA gate array
SYSIO: UPA portID 6, at 000001cc00000000
sbus2: Clock 25.0 MHz
SYSIO: UPA portID 7, at 000001ce00000000
sbus3: Clock 25.0 MHz
dma1: HME DVMA gate array
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 9, 4194304 bytes)
TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
SGI XFS with ACLs, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to mono PROM 80x24
rtc_init: no PC rtc found
zs2 at 0x000001fff8904004 (irq = 12,b9) is a SunZilog
zs3 at 0x000001fff8904000 (irq = 12,b9) is a SunZilog
ttyS0 at MMIO 0x0 (irq = 9268512) is a SunZilog
Console: ttyS0 (SunZilog zs0)
ttyS1 at MMIO 0x0 (irq = 9268512) is a SunZilog
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.02 8/24/03 David S. Miller ([email protected])
eth0: HAPPY MEAL (SBUS) 10/100baseT Ethernet 08:00:20:e5:c8:51
eth1: HAPPY MEAL (SBUS) 10/100baseT Ethernet 08:00:20:e5:c8:51
netconsole: not configured, aborting
esp0: IRQ 7,db SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
esp1: IRQ 7,1db SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 2 ESP hosts found, 2 actually in use.
scsi0 : Sparc ESP366-HME

  Vendor: TOSHIBA   Model: DVD-ROM SD-M1401  Rev: 1007
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02

scsi1 : Sparc ESP366-HME
esp0: target 14 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:14:0: Attached scsi disk sda
esp0: target 15 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1 sdb3
sd 0:0:15:0: Attached scsi disk sdb
esp0: target 6 asynchronous
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20
sr 0:0:6:0: Attached scsi generic sg0 type 5
sd 0:0:14:0: Attached scsi generic sg1 type 0
sd 0:0:15:0: Attached scsi generic sg2 type 0
envctrl: I2C device not found.
d7s: unable to locate device
rtc_sun_init: Registered Mostek RTC driver.
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: VIS
VIS : 128.000 MB/sec
raid5: using function: VIS (128.000 MB/sec)
raid6: int64x1 197 MB/s
raid6: int64x2 333 MB/s
raid6: int64x4 328 MB/s
raid6: int64x8 175 MB/s
raid6: using algorithm int64x2 (333 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
input: Sun Mouse as /class/input/input0
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
TCP bic registered

NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda4 ...
md: created md0
md: bind<sda4>
md: bind<sdb1>
md: running: <sdb1><sda4>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb1
raid0:   comparing sdb1(17684032) with sdb1(17684032)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sda4
raid0:   comparing sda4(13528064) with sdb1(17684032)
raid0:   NOT EQUAL
raid0:   comparing sda4(13528064) with sda4(13528064)
raid0:   END
raid0:   ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 1
raid0: checking sdb1 ... contained as device 0

(17684032) is smallest!.
raid0: checking sda4 ... nope.
raid0: zone->nb_dev: 1, size: 4155968
raid0: current zone offset: 17684032
raid0: done.
raid0 : md_size is 31212096 blocks.
raid0 : conf->hash_spacing is 27056128 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 16 bytes for hash.
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
INIT: version 2.86 booting
Activating swap.
Checking root file system...
fsck 1.37 (21-Mar-2005)
/: clean, 17313EXT3 FS on sda2, internal journal
/488640 files, 262423/976562 blocks
System time was Fri Jul 21 19:30:54 UTC 2006.
Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Fri Jul 21 19:30:56 UTC 2006. Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
sr_mod
FATAL: Module sr_mod not found.
All modules loaded.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
/boot: recovering journal
/boot: clean, 34/124992 files, 29080/249736 blocks
/dev/md0: recovering journal
/dev/md0: clean, 1016600/3908128 files, 5233187/7803024 blocks Setting kernel variables ...
... done. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

Mounting local filekjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode. systems...
/dev/sda1 on /boot type ext3 (rw)
/dev/md0 on /srv type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Setting up networking...done.
Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done.

Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Fri Jul 21 21:31:04 CEST 2006

Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting audio parameters...n INIT: Entering runlevel: 2
klogctl: Invalid argument
PROMLIB: Sun IEEE Boot Prom 'OBP 3.2.26 2000/05/09 19:07'
PROMLIB: Root node compatible:
Linux version 2.6.17.6 (root@wuffmaster) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Sun Jul 16 12:05:21 UTC 2006
ARCH: SUN4U
Ethernet address: 08:00:20:e5:c8:51
On node 0 totalpages: 1832771
DMA zone: 1832771 pages, LIFO batch:15
CENTRAL: Detected 8 slot Enterprise system. cfreg[68] cver[78]
FHC(board 1): Version[1] PartID[fa0] Manuf[3e] (CENTRAL)
FHC(board 0): Version[1] PartID[fa0] Manuf[3e] (JTAG Master)
FHC(board 2): Version[1] PartID[fa0] Manuf[3e]
FHC(board 4): Version[1] PartID[fa0] Manuf[3e]
FHC(board 5): Version[1] PartID[fa0] Manuf[3e]
FHC(board 6): Version[1] PartID[fa0] Manuf[3e]
FHC(board 1): Version[1] PartID[fa0] Manuf[3e]
FHC(board 3): Version[1] PartID[fa0] Manuf[3e]
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
Memory: 14535648k available (3600k kernel code, 1088k data, 200k init) [fffff80000000000,000000037fd00000]
Calibrating delay using timer specific routine.. 800.48 BogoMIPS (lpj=1600966)
Mount-cache hash table entries: 512
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
Using max_cache_size of 8MB
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600104)
CPU[1]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_szeth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. (64)]
CPU 1: synchronized TICK with master CPU (last diff -19 cycles,maxerr 726 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600112)
CPU[4]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 4: synchronized TICK with master CPU (last diff -16 cycles,maxerr 715 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600109)
CPU[5]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 5: synchronized TICK with master CPU (last diff -43 cycles,maxerr 706 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600118)
CPU[8]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 8: synchronized TICK with master CPU (last diff -40 cycles,maxerr 702 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600114)
CPU[9]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 9: synchronized TICK with master CPU (last diff -36 cycles,maxerr 688 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600112)
CPU[10]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 10: synchronized TICK with master CPU (last diff -36 cycles,maxerr 688 cycles)
Calibrating delay using timer specific routine.. 800.06 BogoMIPS (lpj=1600120)
CPU[11]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 11: synchronized TICK with master CPU (last diff -44 cycles,maxerr 708 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600114)
CPU[12]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 12: synchronized TICK with master CPU (last diff -20 cycles,maxerr 712 cycles)
Calibrating delay using timer specific routine.. 800.05 BogoMIPS (lpj=1600116)
CPU[13]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(8388608):line_sz(64)]
CPU 13: synchronized TICK with master CPU (last diff -45 cycles,maxerr 708 cycles)
Brought up 10 CPUs
Total of 10 processors activated (8000.99 BogoMIPS).
migration_cost=174172
NET: Registered protocol family 16
PCI: Probing for controllers.
SCSI subsystem initialized
SYSIO: UPA portID 2, at 000001c400000000
sbus0: Clock 25.0 MHz
SYSIO: UPA portID 3, at 000001c600000000
sbus1: Clock 25.0 MHz
dma0: HME DVMA gate array
SYSIO: UPA portID 6, at 000001cc00000000
sbus2: Clock 25.0 MHz
SYSIO: UPA portID 7, at 000001ce00000000
sbus3: Clock 25.0 MHz
dma1: HME DVMA gate array
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 9, 4194304 bytes)
TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
SGI XFS with ACLs, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to mono PROM 80x24
rtc_init: no PC rtc found
SunZilog: 2 chips.
zs2 at 0x000001fff8904004 (irq = 12,b9) is a SunZilog
zs3 at 0x000001fff8904000 (irq = 12,b9) is a SunZilog
ttyS0 at MMIO 0x0 (irq = 9268512) is a SunZilog
Console: ttyS0 (SunZilog zs0)
ttyS1 at MMIO 0x0 (irq = 9268512) is a SunZilog
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.02 8/24/03 David S. Miller ([email protected])
eth0: HAPPY MEAL (SBUS) 10/100baseT Ethernet 08:00:20:e5:c8:51
eth1: HAPPY MEAL (SBUS) 10/100baseT Ethernet 08:00:20:e5:c8:51
netconsole: not configured, aborting
esp0: IRQ 7,db SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
esp1: IRQ 7,1db SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 2 ESP hosts found, 2 actually in use.
scsi0 : Sparc ESP366-HME

  Vendor: TOSHIBA   Model: DVD-ROM SD-M1401  Rev: 1007
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02

scsi1 : Sparc ESP366-HME
esp0: target 14 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
sda: Write Protect is off
sda: Mode Sense: ab 00 10 08
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
sda: Write Protect is off
sda: Mode Sense: ab 00 10 08
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:14:0: Attached scsi disk sda
esp0: target 15 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
sdb: Write Protect is off
sdb: Mode Sense: ab 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
sdb: Write Protect is off
sdb: Mode Sense: ab 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1 sdb3
sd 0:0:15:0: Attached scsi disk sdb
esp0: target 6 asynchronous
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20
sr 0:0:6:0: Attached scsi CD-ROM sr0
sr 0:0:6:0: Attached scsi generic sg0 type 5
sd 0:0:14:0: Attached scsi generic sg1 type 0
sd 0:0:15:0: Attached scsi generic sg2 type 0
envctrl: I2C device not found.
d7s: unable to locate device
rtc_sun_init: Registered Mostek RTC driver.
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: VIS
VIS : 128.000 MB/sec
raid5: using function: VIS (128.000 MB/sec)
raid6: int64x1 197 MB/s
raid6: int64x2 333 MB/s
raid6: int64x4 328 MB/s
raid6: int64x8 175 MB/s
raid6: using algorithm int64x2 (333 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
input: Sun Mouse as /class/input/input0
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
TCP bic registered

NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda4 ...
md: created md0
md: bind<sda4>
md: bind<sdb1>
md: running: <sdb1><sda4>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb1
raid0:   comparing sdb1(17684032) with sdb1(17684032)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sda4
raid0:   comparing sda4(13528064) with sdb1(17684032)
raid0:   NOT EQUAL
raid0:   comparing sda4(13528064) with sda4(13528064)
raid0:   END
raid0:   ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 1
raid0: checking sdb1 ... contained as device 0

(17684032) is smallest!.
raid0: checking sda4 ... nope.
raid0: zone->nb_dev: 1, size: 4155968
raid0: current zone offset: 17684032
raid0: done.
raid0 : md_size is 31212096 blocks.
raid0 : conf->hash_spacing is 27056128 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 16 bytes for hash.
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 42245 to 42396 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 3670 and revoked 11/63 blocks kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kNET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
journald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Starting system logging: syslog-ng.
Starting internet superserver: inetd.
Starting mail transport agent: Postfix.
Starting OpenBSD Secure Shell server: sshd.
Starting RAID monitor daemon: mdadm -F.
Starting periodic command scheduler: cron.