package/fcft: use release tarball instead of archive
PATCH 1/3 package/fcft: use release tarball instead of archive
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
This change affects tarballs generated by Codeberg, but not release artifacts.
fcft turns out to have a proper release available, so use it.
[1]: https://codeberg.org/Codeberg/Community/issues/2861
--- package/fcft/fcft.hash | 2 +- package/fcft/fcft.mk | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)
package/fcft/fcft.hash +1 -1
@@ -1,3 +1,3 @@ # Locally computed -sha256 79e52aaafc0b57fa2b68ed6127de13e98318050399a939691b8ca30d44d48591 3.3.2.tar.gz +sha256 8dffe750027618e01dd4e6bc9aa9c889033c7abe4a661e9294192b58b4556264 fcft-3.3.2.tar.gz sha256 d534a23a31500a0ac958d9634b84f532bd73ff1aca1bb8f7debbcbebc16ff39a LICENSE
package/fcft/fcft.mk +1 -2
@@ -5,8 +5,7 @@ ################################################################################ FCFT_VERSION = 3.3.2 -FCFT_SOURCE = $(FCFT_VERSION).tar.gz -FCFT_SITE = https://codeberg.org/dnkl/fcft/archive +FCFT_SITE = https://codeberg.org/dnkl/fcft/releases/download/$(FCFT_VERSION) FCFT_LICENSE = MIT FCFT_LICENSE_FILES = LICENSE FCFT_INSTALL_STAGING = YES
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/3 package/gumbo-parser: update hash following Codeberg changes
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
Since it only affects a small number of packages for us (3 on master) and the upstream discussion seems to consider it a "one time change", just update the hash to match the new one.
[1]: https://codeberg.org/Codeberg/Community/issues/2861
--- package/gumbo-parser/gumbo-parser.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/gumbo-parser/gumbo-parser.hash +1 -1
@@ -1,5 +1,5 @@ # Locally computed: -sha256 dbdc159dc8e5c6f3f254e50bce689dd9e439064ff06c165d5653410a5714ab66 0.13.2.tar.gz +sha256 90bea83283760339da194fb90112a532854c13cd1eabdabc7ef7a4dede1dbc9d 0.13.2.tar.gz # Hash for license files: sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 doc/COPYING
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] package/gumbo-parser: update hash following Codeberg changes
Hello,
Adding a number of other Buildroot maintainers in Cc.
Quoted 19 lines · Raphaël Mélotte via buildroot
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
Since it only affects a small number of packages for us (3 on master) and the upstream discussion seems to consider it a "one time change", just update the hash to match the new one.
[1]: https://codeberg.org/Codeberg/Community/issues/2861
Signed-off-by Raphaël Mélotte <[email protected]>--- package/gumbo-parser/gumbo-parser.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)package/gumbo-parser/gumbo-parser.hash +0
-0
package/gumbo-parser/gumbo-parser.hash line 2
Quoted 3 lines
package/gumbo-parser/gumbo-parser.hash +1
-1@@ -1,5 +1,5 @@ # Locally computed: -sha256 dbdc159dc8e5c6f3f254e50bce689dd9e439064ff06c165d5653410a5714ab66 0.13.2.tar.gz +sha256 90bea83283760339da194fb90112a532854c13cd1eabdabc7ef7a4dede1dbc9d 0.13.2.tar.gz
Unfortunately I don't think we can do that. sources.buildroot.net has most likely cached the previous version of the tarball.
Has this package published a new release so that we can do the bump + hash chance at the same time?
Otherwise, is there a trick we could use to generate a different filename?
Same applies to PATCH 3/3 in your series.
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] package/gumbo-parser: update hash following Codeberg changes
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Hi,
Quoted 8 lines
package/gumbo-parser/gumbo-parser.hash line 2
Quoted 5 lines
+++ b/package/gumbo-parser/gumbo-parser.hash
package/gumbo-parser/gumbo-parser.hash +1
-1@@ -1,5 +1,5 @@ # Locally computed: -sha256 dbdc159dc8e5c6f3f254e50bce689dd9e439064ff06c165d5653410a5714ab66 0.13.2.tar.gz +sha256 90bea83283760339da194fb90112a532854c13cd1eabdabc7ef7a4dede1dbc9d 0.13.2.tar.gzUnfortunately I don't think we can do that. sources.buildroot.net has most likely cached the previous version of the tarball.
Yes:
wget https://sources.buildroot.org/gumbo-parser/0.13.2.tar.gz
--2026-09-17 08:48:30-- https://sources.buildroot.org/gumbo-parser/0.13.2.tar.gz
Resolving sources.buildroot.org (sources.buildroot.org)... 138.201.205.61, 2a01:4f8:173:1526::2 Connecting to sources.buildroot.org (sources.buildroot.org)|138.201.205.61|:443... connected. HTTP request sent, awaiting response... 200 OK
Length: 2145403 (2.0M) [application/x-gtar-compressed]
Saving to: ‘0.13.2.tar.gz’
0.13.2.tar.gz 100%[==============================>] 2.05M 7.45MB/s in 0.3s
2026-09-17 08:48:31 (7.45 MB/s) - ‘0.13.2.tar.gz’ saved [2145403/2145403]
sha256sum 0.13.2.tar.gz dbdc159dc8e5c6f3f254e50bce689dd9e439064ff06c165d5653410a5714ab66 0.13.2.tar.gz
Did we report this issue to codeberg already?
Signature · 5 lines
Bye, Peter Korsgaard _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] package/gumbo-parser: update hash following Codeberg changes
Quoted 10 lines · Peter Korsgaard
wget https://sources.buildroot.org/gumbo-parser/0.13.2.tar.gz
--2026-09-17 08:48:30-- https://sources.buildroot.org/gumbo-parser/0.13.2.tar.gz
Resolving sources.buildroot.org (sources.buildroot.org)... 138.201.205.61, 2a01:4f8:173:1526::2 Connecting to sources.buildroot.org (sources.buildroot.org)|138.201.205.61|:443... connected. HTTP request sent, awaiting response... 200 OK
Length: 2145403 (2.0M) [application/x-gtar-compressed]
Saving to: ‘0.13.2.tar.gz’0.13.2.tar.gz 100%[==============================>] 2.05M 7.45MB/s in 0.3s
Quoted 7 lines
2026-09-17 08:48:31 (7.45 MB/s) - ‘0.13.2.tar.gz’ saved [2145403/2145403]sha256sum 0.13.2.tar.gz
dbdc159dc8e5c6f3f254e50bce689dd9e439064ff06c165d5653410a5714ab660.13.2.tar.gzDid we report this issue to codeberg already?
Well, see the original patch, which points to
https://codeberg.org/Codeberg/Community/issues/2861
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] package/gumbo-parser: update hash following Codeberg changes
In reply to Raphaël Mélotte via buildrootHello Raphaël,
Quoted 10 lines · Raphaël Mélotte via buildroot
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
Since it only affects a small number of packages for us (3 on master) and the upstream discussion seems to consider it a "one time change", just update the hash to match the new one.
[1]: https://codeberg.org/Codeberg/Community/issues/2861
Signed-off-by Raphaël Mélotte <[email protected]>
Thanks for the patch. As discussed, the patch couldn't work as-is. However, Peter Korsgaard suggested that we switch this package (and wmenu) to a Git download. This way, the file name being generated in DL_DIR changes, and therefore it is fine to change the hash. I've changed both of your patches to implement this solution, and pushed to master.
Thanks a lot!
Thomas Petazzoni
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 3/3 package/wmenu: update hash following Codeberg changes
In reply to Raphaël Mélotte via buildrootCodeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
Since it only affects a small number of packages for us (3 on master) and the upstream discussion seems to consider it a "one time change", just update the hash to match the new one.
[1]: https://codeberg.org/Codeberg/Community/issues/2861
--- package/wmenu/wmenu.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/wmenu/wmenu.hash +1 -1
@@ -1,3 +1,3 @@ # Locally computed -sha256 4e6aea3f8975fec720f6eb87aad620d5297a8a5a137615e4cf047e95d2b9d308 0.2.0.tar.gz +sha256 b1b593a80310085a90bd349d458ffbcfacf875d74468ae4428bdf5692a671ef9 0.2.0.tar.gz sha256 500f0a221b2f3667676f6a084fb4e92ba4f74d09f45bc492e55aec4dd296bff2 LICENSE
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 10 lines · Raphaël Mélotte via buildroot
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
This change affects tarballs generated by Codeberg, but not release artifacts.
fcft turns out to have a proper release available, so use it.[1]: https://codeberg.org/Codeberg/Community/issues/2861
Signed-off-by Raphaël Mélotte <[email protected]>
Applied, after adding a Fixes: tag pointing to the autobuilder issue being fixed. Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Raphaël Mélotte via buildroot
AppliedIn reply of:
Quoted 10 lines
Codeberg has changed the way it generate hashes for at least some of the generated tarballs (see [1]).
This change affects tarballs generated by Codeberg, but not release artifacts.
fcft turns out to have a proper release available, so use it.[1]: https://codeberg.org/Codeberg/Community/issues/2861
Signed-off-by Raphaël Mélotte <[email protected]>
Applied to 2026.08.x. Thanks
Quoted 19 lines
--- package/fcft/fcft.hash | 2 +- package/fcft/fcft.mk | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)package/fcft/fcft.hash +1
-1@@ -1,3 +1,3 @@ # Locally computed -sha256 79e52aaafc0b57fa2b68ed6127de13e98318050399a939691b8ca30d44d48591 3.3.2.tar.gz +sha256 8dffe750027618e01dd4e6bc9aa9c889033c7abe4a661e9294192b58b4556264 fcft-3.3.2.tar.gz sha256 d534a23a31500a0ac958d9634b84f532bd73ff1aca1bb8f7debbcbebc16ff39a LICENSEpackage/fcft/fcft.mk +0
-0
package/fcft/fcft.mk line 11
Quoted 9 lines
package/fcft/fcft.mk +1
-2@@ -5,8 +5,7 @@ ################################################################################ FCFT_VERSION = 3.3.2 -FCFT_SOURCE = $(FCFT_VERSION).tar.gz -FCFT_SITE = https://codeberg.org/dnkl/fcft/archive +FCFT_SITE = https://codeberg.org/dnkl/fcft/releases/download/$(FCFT_VERSION) FCFT_LICENSE = MIT FCFT_LICENSE_FILES = LICENSE FCFT_INSTALL_STAGING = YES
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot