Kconfig: Add dependencies of POWER_RESET for pmac32
Subsystems (2)
v3 cover Kconfig: Add dependencies of POWER_RESET for pmac32
These patches are to add dependencies of POWER_RESET for pmac32.
As I have to use "savedefconfig" on the latest branch of different architectures, I am sending separate patches for each architecture in v3.
To simplify the enablement of the poweroff support, selecting the required options for CONFIG_POWER_RESET=y may make many people happy especially when they are using a customized config (maybe tinyconfig based) for a target qemu board. Without normal poweroff support from the kernel side, qemu will simply hang[1] there after a 'poweroff' command, which is a very bad experience for the automatical tests.
However, CONFIG_POWER_RESET is ineffective if there are no dependencies that enable certain devices in Kconfig.
Currently, based on tinyconfig, it is very hard to find the exact poweroff related option[2]. Some architectures' poweroff works well without any dependence, the others' poweroff options are hidden deeply, which make things hard.
After multiple verifications, these options have been identified as the minimum dependencies required for poweroff to function normally. Additionally, 'make savedefconfig' simplifies the defconfig automatically.
Zhangjin and I invested a significant amount of time in searching for the current options on these devices. We hope that this set of patches will save time for others. If community like it, we will consider adding dependencies for POWER_RESET on other devices.
We hope every device's CONFIG_POWER_RESET will have proper dependencies. :)
---
[1]: https://lore.kernel.org/lkml/511b2f6009fb830b3f32b4be3dca99596c684fa3.1689759351.git.falcon@tinylab.org/
[2]: https://lore.kernel.org/all/983843582e52e83fba79ad45cea6c79e1f62ec6c.1690489039.git.falcon@tinylab.org/
v1: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
---
Changes in v2:
- Fix the mistake of using spaces instead of tabs in kconfig.
Changes in v3:
- Enable POWER_RESET and simplify the deconfig.
- Select ADB_CUDA in PPC_PMAC32 only.
Yuan Tan (3):
powerpc/config: Cleanup pmac32_defconfig
Kconfig: Add dependencies of POWER_RESET for pmac32 powerpc/config: Simplify pmac32_defconfig
arch/powerpc/configs/pmac32_defconfig | 46 +++++++++++-------------- arch/powerpc/platforms/powermac/Kconfig | 1 + 2 files changed, 21 insertions(+), 26 deletions(-)
base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d
Signature · 1 line
2.34.1
PATCH v3 1/3 powerpc/config: Cleanup pmac32_defconfig
Use 'make savedefconfig' to cleanup pmac32_defconfig, based on Linux 7.6-rc1
--- arch/powerpc/configs/pmac32_defconfig | 44 ++++++++++++--------------- 1 file changed, 19 insertions(+), 25 deletions(-)
arch/powerpc/configs/pmac32_defconfig +19 -25
@@ -1,4 +1,3 @@ -CONFIG_ALTIVEC=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y
@@ -8,12 +7,8 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y +CONFIG_ALTIVEC=y # CONFIG_PPC_CHRP is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
@@ -21,12 +16,15 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_PMAC=y CONFIG_GEN_RTC=y CONFIG_HIGHMEM=y -CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y CONFIG_PM_DEBUG=y CONFIG_APM_EMULATION=y -CONFIG_PCCARD=m -CONFIG_YENTA=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BINFMT_MISC=m +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
@@ -100,6 +98,8 @@ CONFIG_BT_HCIBFUSB=m CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_LEDS=y +CONFIG_PCCARD=m +CONFIG_YENTA=m # CONFIG_STANDALONE is not set CONFIG_CONNECTOR=y CONFIG_MAC_FLOPPY=m
@@ -179,7 +179,6 @@ CONFIG_SERIAL_8250=m CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_NVRAM=y CONFIG_I2C_CHARDEV=m CONFIG_APM_POWER=y CONFIG_BATTERY_PMU=y
@@ -189,7 +188,6 @@ CONFIG_AGP_UNINORTH=m CONFIG_DRM=m CONFIG_DRM_RADEON=m CONFIG_DRM_LEGACY=y -CONFIG_DRM_R128=m CONFIG_FB=y CONFIG_FB_OF=y CONFIG_FB_CONTROL=y
@@ -275,23 +273,19 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m -CONFIG_CRC_T10DIF=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -CONFIG_BOOTX_TEXT=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRC_T10DIF=y +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_BOOTX_TEXT=y
Signature · 1 line
2.34.1
Michael Ellerman
reviewerRe: [PATCH v3 1/3] powerpc/config: Cleanup pmac32_defconfig
Quoted 2 lines · Yuan Tan
Use 'make savedefconfig' to cleanup
pmac32_defconfig, based on Linux 7.6-rc1
Thanks but I don't like doing these updates in a single commit like this, it's easy to accidentally lose a symbol.
I prefer an explanation for what's changing for each symbol. See 1ce7fda142af ("powerpc/configs/64s: Drop IPV6 which is default y") and the commits leading up to it, to see what I mean.
But I suspect you probably don't want to go to all that effort, which is fine :)
So I won't take patch 1, but patch 2 and 3 look fine. No need to resend, I'll deal with any merge fixup needed.
cheers
Re: [PATCH v3 1/3] powerpc/config: Cleanup pmac32_defconfig
Hi Michael
Quoted 5 lines · Michael Ellerman
Quoted 2 lines · Yuan Tan
Use 'make savedefconfig' to cleanup
pmac32_defconfig, based on Linux 7.6-rc1Thanks but I don't like doing these updates in a single commit like this, it's easy to accidentally lose a symbol.
Yeah I have the same concerns too.
Quoted 7 lines
I prefer an explanation for what's changing for each symbol. See
1ce7fda142af("powerpc/configs/64s: Drop IPV6 which is default y") and the commits leading up to it, to see what I mean.But I suspect you probably don't want to go to all that effort, which is fine :)
I am not familiar with other options, so I'd better not do that. :)
By the way, just to be cautious, since the defconfig can only be updated by 'savedefconfig'[1], how can we write an explanation for a single change in an option?
I mean, when I change one option, the value of the other undetermined option will be set just like in patch 1.
[1]: https://lore.kernel.org/all/[email protected]/
Quoted 5 lines
So I won't take patch 1, but patch 2 and 3 look fine. No need to resend, I'll deal with any merge fixup needed.
cheers
Thank you :)
Michael Ellerman
reviewerRe: [PATCH v3 1/3] powerpc/config: Cleanup pmac32_defconfig
Quoted 12 lines · Yuan Tan
Quoted 5 lines · Michael Ellerman
Quoted 2 lines · Yuan Tan
Use 'make savedefconfig' to cleanup
pmac32_defconfig, based on Linux 7.6-rc1Thanks but I don't like doing these updates in a single commit like this, it's easy to accidentally lose a symbol.
Yeah I have the same concerns too.
Quoted 5 lines
I prefer an explanation for what's changing for each symbol. See
1ce7fda142af("powerpc/configs/64s: Drop IPV6 which is default y") and the commits leading up to it, to see what I mean.
Quoted 8 lines
Quoted 2 lines
But I suspect you probably don't want to go to all that effort, which is fine :)
I am not familiar with other options, so I'd better not do that. :)
By the way, just to be cautious, since the defconfig can only be updated by 'savedefconfig'[1], how can we write an explanation for a single change in an option?
Well the defconfig can be updated manually, but the changes you make manually should match what savedefconfig would do.
Quoted 2 lines
I mean, when I change one option, the value of the other undetermined option will be set just like in patch 1.
At that point I just stage the change to the option I'm changing, and leave the other lines modified by savedefconfig alone. That way you can commit the changes made by savedefconfig in multiple steps, explaining what happens along the way, and the end result is the same as what savedefconfig generates.
So for example at the moment if you do savedefconfig on pmac32_defconfig, the start of the diff looks like:
1 diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig 2 index 57ded82c2840..17df965be099 100644 3 --- a/arch/powerpc/configs/pmac32_defconfig 4 +++ b/arch/powerpc/configs/pmac32_defconfig 5 @@ -1,4 +1,3 @@ 6 -CONFIG_ALTIVEC=y 7 # CONFIG_LOCALVERSION_AUTO is not set 8 CONFIG_SYSVIPC=y 9 CONFIG_POSIX_MQUEUE=y 10 @@ -8,12 +7,8 @@ CONFIG_IKCONFIG=y 11 CONFIG_IKCONFIG_PROC=y 12 CONFIG_LOG_BUF_SHIFT=14 13 CONFIG_BLK_DEV_INITRD=y 14 -# CONFIG_COMPAT_BRK is not set 15 CONFIG_PROFILING=y 16 -CONFIG_MODULES=y 17 -CONFIG_MODULE_UNLOAD=y 18 -CONFIG_MODULE_FORCE_UNLOAD=y 19 -CONFIG_PARTITION_ADVANCED=y 20 +CONFIG_ALTIVEC=y 21 # CONFIG_PPC_CHRP is not set 22 CONFIG_CPU_FREQ=y 23 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
So you can stage lines 6 and 20, and commit that as "Update for symbol movement", ie. nothing changed other than a symbol moved.
Then repeat that until eventually the config is up to date.
cheers
PATCH v3 2/3 Kconfig: Add dependencies of POWER_RESET for pmac32
In reply to Yuan Tanpmac32's power off depends on ADB_CUDA to work. Enable it when POWER_RESET is set for convenience.
--- arch/powerpc/platforms/powermac/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/powerpc/platforms/powermac/Kconfig +1 -0
@@ -2,6 +2,7 @@ config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_BOOK3S && CPU_BIG_ENDIAN + select ADB_CUDA if POWER_RESET && PPC32 select MPIC select FORCE_PCI select PPC_INDIRECT_PCI if PPC32
Signature · 1 line
2.34.1
PATCH v3 3/3 powerpc/config: Simplify pmac32_defconfig
In reply to Yuan TanSimplify pmac32_defconfig with POWER_RESET dependences.
Regenerate pmac32_defconfig with 'make savedefconfig'.
--- arch/powerpc/configs/pmac32_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/configs/pmac32_defconfig +1 -1
@@ -138,7 +138,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_ADB=y -CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y CONFIG_ADB_PMU_LED=y CONFIG_ADB_PMU_LED_DISK=y
@@ -180,6 +179,7 @@ CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_I2C_CHARDEV=m +CONFIG_POWER_RESET=y CONFIG_APM_POWER=y CONFIG_BATTERY_PMU=y CONFIG_HWMON=m
Signature · 1 line
2.34.1
Re: (subset) [PATCH v3 0/3] Kconfig: Add dependencies of POWER_RESET for pmac32
In reply to Yuan TanQuoted 5 lines · Yuan Tan
These patches are to add dependencies of
POWER_RESETfor pmac32.As I have to use "savedefconfig" on the latest branch of different architectures, I am sending separate patches for each architecture in v3.
Quoted 8 lines
To simplify the enablement of the poweroff support, selecting the required options for
CONFIG_POWER_RESET=ymay make many people happy especially when they are using a customized config (maybe tinyconfig based) for a target qemu board. Without normal poweroff support from the kernel side, qemu will simply hang[1] there after a 'poweroff' command, which is a very bad experience for the automatical tests.[...]
Patches 2 and 3 applied to powerpc/next.
[2/3] Kconfig: Add dependencies of POWER_RESET for pmac32
https://git.kernel.org/powerpc/c/a3ef2fef198c25c1d9ac6ff89fd50230e9507207 [3/3] powerpc/config: Simplify pmac32_defconfig https://git.kernel.org/powerpc/c/f84b727d132c39c70208503e60149af6dd5a217f
cheers