Skip to contentSkip to conversation

QEMU AVR 8 bit cores

PATCH Superseded Michael Rolnik 5 participants 75 messages Nov 27, 2019 – Dec 5, 2019 Page 2 of 2

v37 of 41 Superseded Latest is v41 →

lore
Share & tools
lore
#57 lore raw
In reply to Aleksandar Markovic
Quoted 8 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

I don't see why you say that the peripherals are inside the chip, there is CPU within target/avr directory and then there are some peripherals in hw directory, CPU does not depend on them. what am I missing?

Quoted 2 lines
Quoted 5 lines

I meant these peripherals are physically inside the chip together with the core.

And USART in a micricontroler from 2010 is different than USART from one from 2018.

Won't these be different chip parts? Or at least revs of the part?

I think broadly the difference between SoC devices is handled by handling versioning in the board models - the board being in this case a CPU core + a bunch of SoC components + the actual board itself.

All the target/cpu stuff needs to deal with is actual architectural revs (c.f. target/arm/cpu[64].c).

Quoted 509 lines
Quoted 509 lines
Quoted 79 lines · Aleksandar Markovic
Quoted 41 lines · Michael Rolnik
Quoted 12 lines · Aleksandar Markovic
Quoted 3 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not

fully tested yet.

Quoted 1 line

However I was able to execute simple code with functions. e.g

fibonacci calculation.

Quoted 3 lines

This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Quoted 5 lines

I have a couple of general remarks, so I am responding to the cover letter, not individual patches.

1) The licenses for Sarah devices differ than the rest - shouldn't all licenses be harmonized?

Sarah,
do you mind if use the same license I use for my code?

Quoted 14 lines

2) There is an architectural problem with peripherals. It is possible that they evolve over time, so, for example, USART could not be the same for older and newer CPUs (in principle, newer peripheral is expected to be o sort of "superset" of the older). How do you solve that problem? Right now, it may not looks serious to you, but if you don;t think about that right now, from the outset, soon the code will become so entangled, ti woudl be almost very difficult to fix it. Please think about that, how would you solve it, is there a way to pass the information on the currently emulated CPU to the code covering a peripheral, and provide a different behaviour?

Quoted 5 lines

Hi Aleksandar,

Please explain.

My concern is about peripherals inside the chip, together with the core.

If one models, let's say an external (in the sense, it is a separate chip) ADC (analog-to-digital converter), one looks at specs, implement what is resonable possible in QEMU, plug it in in one of machines thst contains it, and that's it. That ADC remains the same, of course, whatever the surrounding system is.

In AVR case, I think we have a phenomenon likes of which we didn't see before (at least I don't know about). Number of AVR microcontrollers is very large, and both cores and peripherals evolved.

For cores, you handle differences with all these AVR_FEATURE macros, and this seems to be working, no significant objection from my side, and btw that was not an easy task to execute, all admiration from me.

But what about peripherals inside the chip? A peripheral with the same name and the same general area of functionality may be differently specified for microcontrollers from 2010 and 2018. By the difference I don't mean starting address, but the difference in behavior. I don't have time right now to spell many examples, but I read three different specs, and there are differences in USART specifications.

I am not clear what is your envisioned solution for these cases. Would you such close, but not the same, flabors of a peripheral treat as if they are two completely separate cases of a peripheral? Or would you have a single peripheral that would somehow configure itself depending on the core it is attached to?

Quoted 420 lines

I hope I was clearer this time.

Aleksandar

Quoted 413 lines

I don't see any problem from CPU's perspective.
as for the sample board is just a sample, I hope other people will create real models or real hw.
there was no way I could provide a CPU alone, that's why there is sample.

Quoted 349 lines
Quoted 2 lines

Following are examples of possible usages, assuming program.elf is

compiled for AVR cpu

Quoted 3 lines

1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into

telnet window

Quoted 1 line

run `qemu-system-avr -kernel program.elf -serial

tcp::5678,server,nowait -nographic `

Quoted 2 lines

run telent localhost 5678
3. Continious non interrupted execution with serial output into

stdout

Quoted 4 lines

run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target

remote :1234`

Quoted 3 lines

5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Thank you so much for these examples!

Aleksandar

Quoted 3 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or

translation

Quoted 9 lines

2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which

allows to execute simple code

Quoted 9 lines

4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of

0x000000ff) for faster address manipulaton

Quoted 13 lines

2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM 11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

Quoted 2 lines

changes since v4
1. target is now defined as big endian in order to optimize

push_ret/pop_ret

Quoted 14 lines

2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

Quoted 6 lines

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_

cpu_gdb_write_register

Quoted 1 line

2. configure the target as little endian because otherwise GDB does

not work

Quoted 5 lines

3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported

yet registers only

Quoted 4 lines

3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for

all

Quoted 9 lines

2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

Quoted 5 lines

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to

any device

Quoted 4 lines

5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to

access registers

Quoted 3 lines

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were

introduced

Quoted 12 lines

2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

Quoted 12 lines

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register

functions

Quoted 8 lines

12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing

exists)

Quoted 8 lines

2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify,

write(helper_outb)

Quoted 5 lines

3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are

accessible

Quoted 30 lines

by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

Quoted 8 lines
1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and

fixes a couple of bugs wrt single stepping

Quoted 40 lines

by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

Quoted 8 lines

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

Quoted 8 lines

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

Quoted 7 lines

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU"

into three patches

Quoted 12 lines
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

Quoted 9 lines
    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS

Quoted 23 lines

7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Quoted 2 lines

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer

peripherals

Quoted 16 lines
 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
Quoted 8 lines
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
Quoted 48 lines

++++++++++++++++++++++++++++++

Quoted 46 lines
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

Signature · 1 line
Alex Bennée
#58 lore raw
Quoted 21 lines · Alex Bennée
Quoted 1 line · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines

I don't see why you say that the peripherals are inside the chip, there

is

Quoted 1 line
Quoted 1 line

CPU within target/avr directory and then there are some peripherals in

hw

Quoted 5 lines
Quoted 4 lines

directory, CPU does not depend on them. what am I missing?

Quoted 2 lines

I meant these peripherals are physically inside the chip together with

the

Quoted 4 lines

core.

And USART in a micricontroler from 2010 is different than USART from one from 2018.

Quoted 10 lines

Won't these be different chip parts? Or at least revs of the part?

I think broadly the difference between SoC devices is handled by handling versioning in the board models - the board being in this case a CPU core + a bunch of SoC components + the actual board itself.

All the target/cpu stuff needs to deal with is actual architectural revs (c.f. target/arm/cpu[64].c).

This sounds like a very good way of dealing with this.

I don't want to force Michael to implement some of such cases before integration, but just to think about such cases - for future improvements and developments.

Alex, I appreciate your advice, very nice of you!

Aleksandar

Quoted 536 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 14 lines · wrote:
Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 8 lines · Aleksandar Markovic
Quoted 3 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not

fully tested yet.

Quoted 1 line

However I was able to execute simple code with functions. e.g

fibonacci calculation.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

I have a couple of general remarks, so I am responding to the cover letter, not individual patches.

1) The licenses for Sarah devices differ than the rest - shouldn't

all

Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 1 line

licenses be harmonized?

Sarah,
do you mind if use the same license I use for my code?

Quoted 14 lines

2) There is an architectural problem with peripherals. It is possible that they evolve over time, so, for example, USART could not be the same for older and newer CPUs (in principle, newer peripheral is expected to be o sort of "superset" of the older). How do you solve that problem? Right now, it may not looks serious to you, but if you don;t think about that right now, from the outset, soon the code will become so entangled, ti woudl be almost very difficult to fix it. Please think about that, how would you solve it, is there a way to pass the information on the currently emulated CPU to the code covering a peripheral, and provide a different behaviour?

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

Hi Aleksandar,

Please explain.

My concern is about peripherals inside the chip, together with the

core.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

If one models, let's say an external (in the sense, it is a separate chip) ADC (analog-to-digital converter), one looks at specs, implement

what

Quoted 1 line
Quoted 1 line
Quoted 1 line

is resonable possible in QEMU, plug it in in one of machines thst

contains

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

it, and that's it. That ADC remains the same, of course, whatever the surrounding system is.

In AVR case, I think we have a phenomenon likes of which we didn't see before (at least I don't know about). Number of AVR microcontrollers is very large, and both cores and peripherals evolved.

For cores, you handle differences with all these AVR_FEATURE macros,

and

Quoted 1 line
Quoted 1 line
Quoted 1 line

this seems to be working, no significant objection from my side, and

btw

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

that was not an easy task to execute, all admiration from me.

But what about peripherals inside the chip? A peripheral with the same name and the same general area of functionality may be differently specified for microcontrollers from 2010 and 2018. By the difference I don't mean starting address, but the difference in behavior. I don't

have

Quoted 1 line
Quoted 1 line
Quoted 1 line

time right now to spell many examples, but I read three different

specs,

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

and there are differences in USART specifications.

I am not clear what is your envisioned solution for these cases. Would you such close, but not the same, flabors of a peripheral treat as if

they

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

are two completely separate cases of a peripheral? Or would you have a single peripheral that would somehow configure itself depending on the

core

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

it is attached to?

I hope I was clearer this time.

Aleksandar

Quoted 3 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

I don't see any problem from CPU's perspective.
as for the sample board is just a sample, I hope other people will create real models or real hw.
there was no way I could provide a CPU alone, that's why there is

sample.

Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 5 lines

Following are examples of possible usages, assuming program.elf is

compiled for AVR cpu

Quoted 3 lines

1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into

telnet window

Quoted 1 line

run `qemu-system-avr -kernel program.elf -serial

tcp::5678,server,nowait -nographic `

Quoted 2 lines

run telent localhost 5678
3. Continious non interrupted execution with serial output into

stdout

Quoted 4 lines

run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target

remote :1234`

Quoted 3 lines

5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Thank you so much for these examples!

Aleksandar

Quoted 3 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or

translation

Quoted 9 lines

2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which

allows to execute simple code

Quoted 9 lines

4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of

0x000000ff) for faster address manipulaton

Quoted 13 lines

2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM 11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

Quoted 2 lines

changes since v4
1. target is now defined as big endian in order to optimize

push_ret/pop_ret

Quoted 14 lines

2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in

avr_cpu_gdb_read_register/avr_

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

cpu_gdb_write_register

Quoted 1 line

2. configure the target as little endian because otherwise GDB does

not work

Quoted 2 lines

3. fixing and testing gen_push_ret/gen_pop_ret

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported

yet registers only

Quoted 4 lines

3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built

for

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

all

Quoted 9 lines

2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed

to

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

any device

Quoted 4 lines

5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to

access registers

Quoted 3 lines

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb

were

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines

introduced

Quoted 12 lines

2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

Quoted 12 lines

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register

functions

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a

thing

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

exists)

Quoted 3 lines

2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my

code

Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 5 lines

5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify,

write(helper_outb)

Quoted 5 lines

3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are

accessible

Quoted 30 lines

by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

Quoted 8 lines
1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and

fixes a couple of bugs wrt single stepping

Quoted 48 lines

by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

translation - CPU main translation funcions' commit

Quoted 3 lines

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except

sreg Z

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in

avr_timer16.c

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 1 line

3. split "target/avr: Register AVR support with the rest of QEMU"

into three patches

Quoted 12 lines
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

Quoted 9 lines
    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS

Quoted 2 lines

7. use git commit sha1 instead of `master`` in avocado test

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control

Instructions

Quoted 93 lines
Quoted 93 lines
Quoted 92 lines
Quoted 91 lines
Quoted 37 lines
Quoted 10 lines

target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Quoted 2 lines

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer

peripherals

Quoted 16 lines
 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
Quoted 8 lines
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
Quoted 48 lines

++++++++++++++++++++++++++++++

Quoted 46 lines
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

Quoted 4 lines
Quoted 4 lines

--
Best Regards,
Michael Rolnik

--
Alex Bennée

#59 lore raw
In reply to Alex Bennée
Quoted 21 lines · Alex Bennée
Quoted 1 line · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines

I don't see why you say that the peripherals are inside the chip, there

is

Quoted 1 line
Quoted 1 line

CPU within target/avr directory and then there are some peripherals in

hw

Quoted 5 lines
Quoted 4 lines

directory, CPU does not depend on them. what am I missing?

Quoted 2 lines

I meant these peripherals are physically inside the chip together with

the

Quoted 4 lines

core.

And USART in a micricontroler from 2010 is different than USART from one from 2018.

Quoted 10 lines

Won't these be different chip parts? Or at least revs of the part?

I think broadly the difference between SoC devices is handled by handling versioning in the board models - the board being in this case a CPU core + a bunch of SoC components + the actual board itself.

All the target/cpu stuff needs to deal with is actual architectural revs (c.f. target/arm/cpu[64].c).

Michael, please take a look at this link:

https://web-engineering.info/node/28

"Part number" seems to be the thing you'll need to incorporate in the overall AVR support in QEMU in order to get the correct emulation of in-chip peripherals - as Alex actually hinted. (In my opinion, you don't need it now, in the initial version, but by no means in near future.)

Have a great weekend!

Quoted 536 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 14 lines · wrote:
Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 8 lines · Aleksandar Markovic
Quoted 3 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not

fully tested yet.

Quoted 1 line

However I was able to execute simple code with functions. e.g

fibonacci calculation.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

I have a couple of general remarks, so I am responding to the cover letter, not individual patches.

1) The licenses for Sarah devices differ than the rest - shouldn't

all

Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 1 line

licenses be harmonized?

Sarah,
do you mind if use the same license I use for my code?

Quoted 14 lines

2) There is an architectural problem with peripherals. It is possible that they evolve over time, so, for example, USART could not be the same for older and newer CPUs (in principle, newer peripheral is expected to be o sort of "superset" of the older). How do you solve that problem? Right now, it may not looks serious to you, but if you don;t think about that right now, from the outset, soon the code will become so entangled, ti woudl be almost very difficult to fix it. Please think about that, how would you solve it, is there a way to pass the information on the currently emulated CPU to the code covering a peripheral, and provide a different behaviour?

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

Hi Aleksandar,

Please explain.

My concern is about peripherals inside the chip, together with the

core.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

If one models, let's say an external (in the sense, it is a separate chip) ADC (analog-to-digital converter), one looks at specs, implement

what

Quoted 1 line
Quoted 1 line
Quoted 1 line

is resonable possible in QEMU, plug it in in one of machines thst

contains

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

it, and that's it. That ADC remains the same, of course, whatever the surrounding system is.

In AVR case, I think we have a phenomenon likes of which we didn't see before (at least I don't know about). Number of AVR microcontrollers is very large, and both cores and peripherals evolved.

For cores, you handle differences with all these AVR_FEATURE macros,

and

Quoted 1 line
Quoted 1 line
Quoted 1 line

this seems to be working, no significant objection from my side, and

btw

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

that was not an easy task to execute, all admiration from me.

But what about peripherals inside the chip? A peripheral with the same name and the same general area of functionality may be differently specified for microcontrollers from 2010 and 2018. By the difference I don't mean starting address, but the difference in behavior. I don't

have

Quoted 1 line
Quoted 1 line
Quoted 1 line

time right now to spell many examples, but I read three different

specs,

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

and there are differences in USART specifications.

I am not clear what is your envisioned solution for these cases. Would you such close, but not the same, flabors of a peripheral treat as if

they

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

are two completely separate cases of a peripheral? Or would you have a single peripheral that would somehow configure itself depending on the

core

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

it is attached to?

I hope I was clearer this time.

Aleksandar

Quoted 3 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

I don't see any problem from CPU's perspective.
as for the sample board is just a sample, I hope other people will create real models or real hw.
there was no way I could provide a CPU alone, that's why there is

sample.

Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 5 lines

Following are examples of possible usages, assuming program.elf is

compiled for AVR cpu

Quoted 3 lines

1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into

telnet window

Quoted 1 line

run `qemu-system-avr -kernel program.elf -serial

tcp::5678,server,nowait -nographic `

Quoted 2 lines

run telent localhost 5678
3. Continious non interrupted execution with serial output into

stdout

Quoted 4 lines

run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target

remote :1234`

Quoted 3 lines

5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Thank you so much for these examples!

Aleksandar

Quoted 3 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or

translation

Quoted 9 lines

2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which

allows to execute simple code

Quoted 9 lines

4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of

0x000000ff) for faster address manipulaton

Quoted 13 lines

2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM 11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

Quoted 2 lines

changes since v4
1. target is now defined as big endian in order to optimize

push_ret/pop_ret

Quoted 14 lines

2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in

avr_cpu_gdb_read_register/avr_

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

cpu_gdb_write_register

Quoted 1 line

2. configure the target as little endian because otherwise GDB does

not work

Quoted 2 lines

3. fixing and testing gen_push_ret/gen_pop_ret

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported

yet registers only

Quoted 4 lines

3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built

for

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

all

Quoted 9 lines

2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed

to

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

any device

Quoted 4 lines

5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to

access registers

Quoted 3 lines

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb

were

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines

introduced

Quoted 12 lines

2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

Quoted 12 lines

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register

functions

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a

thing

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

exists)

Quoted 3 lines

2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my

code

Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 5 lines

5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify,

write(helper_outb)

Quoted 5 lines

3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are

accessible

Quoted 30 lines

by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

Quoted 8 lines
1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and

fixes a couple of bugs wrt single stepping

Quoted 48 lines

by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

translation - CPU main translation funcions' commit

Quoted 3 lines

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except

sreg Z

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in

avr_timer16.c

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 1 line

3. split "target/avr: Register AVR support with the rest of QEMU"

into three patches

Quoted 12 lines
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

Quoted 9 lines
    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS

Quoted 2 lines

7. use git commit sha1 instead of `master`` in avocado test

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control

Instructions

Quoted 93 lines
Quoted 93 lines
Quoted 92 lines
Quoted 91 lines
Quoted 37 lines
Quoted 10 lines

target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Quoted 2 lines

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer

peripherals

Quoted 16 lines
 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
Quoted 8 lines
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
Quoted 48 lines

++++++++++++++++++++++++++++++

Quoted 46 lines
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

Quoted 4 lines
Quoted 4 lines

--
Best Regards,
Michael Rolnik

--
Alex Bennée

#60 lore raw
Quoted 36 lines · Aleksandar Markovic
Quoted 21 lines · Alex Bennée
Quoted 1 line · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines

I don't see why you say that the peripherals are inside the chip,

there is

Quoted 1 line
Quoted 1 line

CPU within target/avr directory and then there are some peripherals in

hw

Quoted 5 lines
Quoted 4 lines

directory, CPU does not depend on them. what am I missing?

Quoted 2 lines

I meant these peripherals are physically inside the chip together with

the

Quoted 4 lines

core.

And USART in a micricontroler from 2010 is different than USART from one from 2018.

Quoted 10 lines

Won't these be different chip parts? Or at least revs of the part?

I think broadly the difference between SoC devices is handled by handling versioning in the board models - the board being in this case a CPU core + a bunch of SoC components + the actual board itself.

All the target/cpu stuff needs to deal with is actual architectural revs (c.f. target/arm/cpu[64].c).

Quoted 10 lines

Michael, please take a look at this link:

https://web-engineering.info/node/28

"Part number" seems to be the thing you'll need to incorporate in the overall AVR support in QEMU in order to get the correct emulation of in-chip peripherals - as Alex actually hinted. (In my opinion, you don't need it now, in the initial version, but by no means in near future.)

Here is the list of "part numbers" for 212 (!! a mind-blowing number) of AVR microcontrollers:

https://github.com/felias-fogg/RescueAVR/blob/master/all.list

Quoted 545 lines

Have a great weekend!

Quoted 542 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines · Aleksandar Markovic

On Thursday, November 28, 2019, Michael Rolnik <[email protected]>

Quoted 14 lines · wrote:
Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 8 lines · Aleksandar Markovic
Quoted 3 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not

fully tested yet.

Quoted 1 line

However I was able to execute simple code with functions. e.g

fibonacci calculation.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

I have a couple of general remarks, so I am responding to the cover letter, not individual patches.

1) The licenses for Sarah devices differ than the rest - shouldn't

all

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 1 line

licenses be harmonized?

Sarah,
do you mind if use the same license I use for my code?

Quoted 4 lines

2) There is an architectural problem with peripherals. It is

possible

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

that they evolve over time, so, for example, USART could not be the same for older and newer CPUs (in principle, newer peripheral is expected to be o sort of "superset" of the older). How do you solve that problem? Right now, it may not looks serious to you, but if you don;t think about that right now, from the outset, soon the code

will

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
Quoted 5 lines

become so entangled, ti woudl be almost very difficult to fix it. Please think about that, how would you solve it, is there a way to pass the information on the currently emulated CPU to the code covering a peripheral, and provide a different behaviour?

Hi Aleksandar,

Please explain.

My concern is about peripherals inside the chip, together with the

core.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

If one models, let's say an external (in the sense, it is a separate chip) ADC (analog-to-digital converter), one looks at specs,

implement what

Quoted 1 line
Quoted 1 line
Quoted 1 line

is resonable possible in QEMU, plug it in in one of machines thst

contains

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

it, and that's it. That ADC remains the same, of course, whatever the surrounding system is.

In AVR case, I think we have a phenomenon likes of which we didn't see before (at least I don't know about). Number of AVR microcontrollers

is

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

very large, and both cores and peripherals evolved.

For cores, you handle differences with all these AVR_FEATURE macros,

and

Quoted 1 line
Quoted 1 line
Quoted 1 line

this seems to be working, no significant objection from my side, and

btw

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

that was not an easy task to execute, all admiration from me.

But what about peripherals inside the chip? A peripheral with the same name and the same general area of functionality may be differently specified for microcontrollers from 2010 and 2018. By the difference I don't mean starting address, but the difference in behavior. I don't

have

Quoted 1 line
Quoted 1 line
Quoted 1 line

time right now to spell many examples, but I read three different

specs,

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

and there are differences in USART specifications.

I am not clear what is your envisioned solution for these cases. Would you such close, but not the same, flabors of a peripheral treat as if

they

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

are two completely separate cases of a peripheral? Or would you have a single peripheral that would somehow configure itself depending on

the core

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

it is attached to?

I hope I was clearer this time.

Aleksandar

Quoted 3 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

I don't see any problem from CPU's perspective.
as for the sample board is just a sample, I hope other people will create real models or real hw.
there was no way I could provide a CPU alone, that's why there is

sample.

Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 83 lines
Quoted 5 lines

Following are examples of possible usages, assuming program.elf is

compiled for AVR cpu

Quoted 3 lines

1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into

telnet window

Quoted 1 line

run `qemu-system-avr -kernel program.elf -serial

tcp::5678,server,nowait -nographic `

Quoted 2 lines

run telent localhost 5678
3. Continious non interrupted execution with serial output into

stdout

Quoted 4 lines

run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target

remote :1234`

Quoted 3 lines

5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Thank you so much for these examples!

Aleksandar

Quoted 3 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or

translation

Quoted 9 lines

2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which

allows to execute simple code

Quoted 9 lines

4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of

0x000000ff) for faster address manipulaton

Quoted 13 lines

2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM 11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

Quoted 2 lines

changes since v4
1. target is now defined as big endian in order to optimize

push_ret/pop_ret

Quoted 14 lines

2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in

avr_cpu_gdb_read_register/avr_

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

cpu_gdb_write_register

Quoted 1 line

2. configure the target as little endian because otherwise GDB

does

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

not work

Quoted 5 lines

3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non

supported

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

yet registers only

Quoted 4 lines

3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built

for

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

all

Quoted 9 lines

2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not

routed to

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

any device

Quoted 4 lines

5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to

access registers

Quoted 3 lines

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb

were

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines

introduced

Quoted 12 lines

2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

Quoted 12 lines

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register

functions

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a

thing

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

exists)

Quoted 3 lines

2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my

code

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 5 lines

5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify,

write(helper_outb)

Quoted 5 lines

3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers

are

Quoted 88 lines
Quoted 88 lines
Quoted 88 lines
Quoted 88 lines
Quoted 88 lines

accessible

Quoted 30 lines

by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

Quoted 8 lines
1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and

fixes a couple of bugs wrt single stepping

Quoted 48 lines

by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

translation - CPU main translation funcions' commit

Quoted 3 lines

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except

sreg Z

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in

avr_timer16.c

Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 1 line

3. split "target/avr: Register AVR support with the rest of QEMU"

into three patches

Quoted 12 lines
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

Quoted 9 lines
    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS

Quoted 2 lines

7. use git commit sha1 instead of `master`` in avocado test

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control

Instructions

Quoted 93 lines
Quoted 93 lines
Quoted 92 lines
Quoted 91 lines
Quoted 37 lines
Quoted 10 lines

target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Quoted 2 lines

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer

peripherals

Quoted 16 lines
 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
Quoted 8 lines
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
Quoted 48 lines

++++++++++++++++++++++++++++++

Quoted 46 lines
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

Quoted 4 lines
Quoted 4 lines

--
Best Regards,
Michael Rolnik

--
Alex Bennée

#61 lore raw
In reply to Michael Rolnik
Quoted 2 lines

Sarah,
do you mind if use the same license I use for my code?

I'm happy to use the same license.

Kind regards,
Sarah Harris

Quoted 443 lines · On Thu, 28 Nov 2019 14:28:19 +0200 Michael Rolnik <[email protected]> wrote:
Quoted 11 lines · Aleksandar Markovic
Quoted 3 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully

tested yet.

Quoted 1 line

However I was able to execute simple code with functions. e.g fibonacci

calculation.

Quoted 3 lines

This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Quoted 5 lines

I have a couple of general remarks, so I am responding to the cover letter, not individual patches.

1) The licenses for Sarah devices differ than the rest - shouldn't all licenses be harmonized?

Sarah,
do you mind if use the same license I use for my code?

Quoted 14 lines

2) There is an architectural problem with peripherals. It is possible that they evolve over time, so, for example, USART could not be the same for older and newer CPUs (in principle, newer peripheral is expected to be o sort of "superset" of the older). How do you solve that problem? Right now, it may not looks serious to you, but if you don;t think about that right now, from the outset, soon the code will become so entangled, ti woudl be almost very difficult to fix it. Please think about that, how would you solve it, is there a way to pass the information on the currently emulated CPU to the code covering a peripheral, and provide a different behaviour?

Hi Aleksandar,

Please explain. I don't see any problem from CPU's perspective. as for the sample board is just a sample, I hope other people will create real models or real hw.
there was no way I could provide a CPU alone, that's why there is sample.

Quoted 391 lines
Quoted 2 lines

Following are examples of possible usages, assuming program.elf is

compiled for AVR cpu

Quoted 3 lines

1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet

window

Quoted 1 line

run `qemu-system-avr -kernel program.elf -serial

tcp::5678,server,nowait -nographic `

Quoted 6 lines

run telent localhost 5678
3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote

:1234`

Quoted 3 lines

5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Thank you so much for these examples!

Aleksandar

Quoted 4 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

Quoted 8 lines
     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows

to execute simple code

Quoted 9 lines

4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of

0x000000ff) for faster address manipulaton

Quoted 13 lines

2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM 11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

Quoted 2 lines

changes since v4
1. target is now defined as big endian in order to optimize

push_ret/pop_ret

Quoted 14 lines

2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

Quoted 6 lines

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in

avr_cpu_gdb_read_register/avr_cpu_gdb_write_register

Quoted 1 line

2. configure the target as little endian because otherwise GDB does not

work

Quoted 5 lines

3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet

registers only

Quoted 13 lines

3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

Quoted 5 lines

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to

any device

Quoted 4 lines

5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access

registers

Quoted 3 lines

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were

introduced

Quoted 12 lines

2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

Quoted 12 lines

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register

functions

Quoted 8 lines

12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing

exists)

Quoted 5 lines

2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

Quoted 8 lines

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are

accessible

Quoted 30 lines

by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

Quoted 8 lines
1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a

couple of bugs wrt single stepping

Quoted 40 lines

by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

Quoted 8 lines

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

Quoted 8 lines

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

Quoted 7 lines

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into

three patches

Quoted 12 lines
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

Quoted 9 lines
    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS

Quoted 95 lines

7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

Signature · 2 lines
Best Regards,
Michael Rolnik
#62 lore raw
In reply to Michael Rolnik
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

What is still missing is a documentstion patch. You need to browse a bit QEMU online documentation https://qemu.weilnetz.de/doc/qemu-doc.html and find the right place and content for AVR. Source for documentation is within the tree, in one of .texi or .rst files.

Please also split Sarah's patch into three, not only for reviewing purpose, but for the sake of future readers.

Yours,
Aleksandar

Quoted 364 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content
12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions 12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into
three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS
7.  use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

#63 lore raw
In reply to Michael Rolnik
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 363 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content
12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions 12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into
three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS
7.  use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

#64 lore raw

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Regards,
Michael Rolnik

Quoted 403 lines · Aleksandar Markovic
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 363 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions 12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into
three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS
7.  use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

Signature · 2 lines
Best Regards,
Michael Rolnik
#65 lore raw
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

Best regards,
Akeksandar

Quoted 419 lines

Regards,
Michael Rolnik

Quoted 32 lines · Aleksandar Markovic
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 374 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 365 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into
three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

#66 lore raw
Quoted 25 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107

Best regards,

Quoted 427 lines

Akeksandar

Quoted 421 lines

Regards,
Michael Rolnik

Quoted 32 lines · Aleksandar Markovic
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 376 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 367 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes
a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU" into
three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

#67 lore raw

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 490 lines · Aleksandar Markovic
Quoted 25 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107

Best regards,

Quoted 428 lines

Akeksandar

Quoted 422 lines

Regards,
Michael Rolnik

Quoted 32 lines · Aleksandar Markovic
Quoted 17 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678

Quoted 10 lines

3. Continious non interrupted execution with serial output into stdout run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell `target remote
:1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 377 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 368 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes
a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU"
into three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052 ++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

Signature · 2 lines
Best Regards,
Michael Rolnik
#68 lore raw
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 502 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 432 lines

Best regards,

Quoted 431 lines

Akeksandar

Quoted 425 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 379 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 370 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU"
into three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

#69 lore raw

how can I get this elf flags from within QEMU?

Quoted 525 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 503 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 433 lines

Best regards,

Quoted 432 lines

Akeksandar

Quoted 426 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 380 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 371 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35

1.  rebase
2.  use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3.  split "target/avr: Register AVR support with the rest of QEMU"
into three patches
    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

Signature · 2 lines
Best Regards,
Michael Rolnik
#70 lore raw
Quoted 4 lines · Michael Rolnik

how can I get this elf flags from within QEMU?

Quoted 2 lines

In one of files from your "machine" patch, you have this snippet:

+ bytes_loaded = load_elf(
+ filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE, 0,
0);

With this line you a kind of "blindly" load whatever you find in the file "filename". I think you need to modify load_elf() to fetch the information on what core the elf in question is compiled for. Additionally, you most likely have to check if the elf file is compiled for AVR at all.

I don't know enough about AVR-specifics of ELF format, but I know that we in MIPS read successfuly some MIPS-specific things we need to know. Do some research for ELF format headrr content for AVR.

This is really missing in your series, seriously.

Please keep in mind that I don't have right now at hand any dev system, so all I said here is off of my head.

You have to do some code digging.

Best regards, Aleksandar

Quoted 535 lines
Quoted 10 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines
Quoted 517 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 505 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 435 lines

Best regards,

Quoted 434 lines

Akeksandar

Quoted 428 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 382 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 373 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_ cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches

    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration
target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

#71 lore raw

v37 cover QEMU AVR 8 bit cores

Quoted 23 lines · Aleksandar Markovic
Quoted 4 lines · Michael Rolnik

how can I get this elf flags from within QEMU?

Quoted 2 lines

In one of files from your "machine" patch, you have this snippet:

(quoted diff) +2 -0
+        bytes_loaded = load_elf(
+            filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE, 0,

0);

With this line you a kind of "blindly" load whatever you find in the file "filename". I think you need to modify load_elf() to fetch the information on what core the elf in question is compiled for. Additionally, you most likely have to check if the elf file is compiled for AVR at all.

I don't know enough about AVR-specifics of ELF format, but I know that we in MIPS read successfuly some MIPS-specific things we need to know. Do some research for ELF format headrr content for AVR.

Quoted 8 lines

This is really missing in your series, seriously.

Please keep in mind that I don't have right now at hand any dev system, so all I said here is off of my head.

You have to do some code digging.

First, you need to update

https://github.com/qemu/qemu/blob/master/include/elf.h

with bits and pieces for AVR.

In binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/common.h

you will spot the line:

#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */

that is the value of e_machine field for AVR, which you need to insert in qemu's include/elf.h about at line 162.

Then, in another binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/avr.h

you find the lines:

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100
#define E_AVR_MACH_XMEGA1 101
#define E_AVR_MACH_XMEGA2 102
#define E_AVR_MACH_XMEGA3 103
#define E_AVR_MACH_XMEGA4 104
#define E_AVR_MACH_XMEGA5 105
#define E_AVR_MACH_XMEGA6 106
#define E_AVR_MACH_XMEGA7 107

That you also need to insert in qemu's include/elf.h, probably at the end of tge foke or elsewhere.

Perhaps something more you need to insert into that file, you'll see.

Than, you need to modify the file where load_elf() resides with AVR support, take a look at other architectures' support, and adjust to what you need.

I know it will be contrieved at times, but, personally, similar ELF support must be done for any upcoming platform. Only if there is some unsourmantable obstacle, that support can be omitted.

I am on vacation next 10 days.

Yours,
Aleksandar

.

Quoted 540 lines

Best regards, Aleksandar

Quoted 536 lines
Quoted 10 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines
Quoted 518 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 506 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 436 lines

Best regards,

Quoted 435 lines

Akeksandar

Quoted 429 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 383 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 374 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add instruction

translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches

    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control
Instructions
target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

#72 lore raw
Quoted 87 lines · Aleksandar Markovic
Quoted 23 lines · Aleksandar Markovic
Quoted 4 lines · Michael Rolnik

how can I get this elf flags from within QEMU?

Quoted 2 lines

In one of files from your "machine" patch, you have this snippet:

(quoted diff) +2 -0
+        bytes_loaded = load_elf(
+            filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE, 0,

0);

With this line you a kind of "blindly" load whatever you find in the file "filename". I think you need to modify load_elf() to fetch the information on what core the elf in question is compiled for. Additionally, you most likely have to check if the elf file is compiled for AVR at all.

I don't know enough about AVR-specifics of ELF format, but I know that we in MIPS read successfuly some MIPS-specific things we need to know. Do some research for ELF format headrr content for AVR.

Quoted 8 lines

This is really missing in your series, seriously.

Please keep in mind that I don't have right now at hand any dev system, so all I said here is off of my head.

You have to do some code digging.

First, you need to update

https://github.com/qemu/qemu/blob/master/include/elf.h

with bits and pieces for AVR.

In binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/common.h

you will spot the line:

#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */

that is the value of e_machine field for AVR, which you need to insert in qemu's include/elf.h about at line 162.

Then, in another binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/avr.h

you find the lines:

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100
#define E_AVR_MACH_XMEGA1 101
#define E_AVR_MACH_XMEGA2 102
#define E_AVR_MACH_XMEGA3 103
#define E_AVR_MACH_XMEGA4 104
#define E_AVR_MACH_XMEGA5 105
#define E_AVR_MACH_XMEGA6 106
#define E_AVR_MACH_XMEGA7 107

That you also need to insert in qemu's include/elf.h, probably at the end of tge foke or elsewhere.

Perhaps something more you need to insert into that file, you'll see.

Than, you need to modify the file where load_elf() resides with AVR support, take a look at other architectures' support, and adjust to what you need.

Quoted 7 lines

I know it will be contrieved at times, but, personally, similar ELF support must be done for any upcoming platform. Only if there is some unsourmantable obstacle, that support can be omitted.

I am on vacation next 10 days.

In the source of readelf utility:

static void
decode_AVR_machine_flags (unsigned e_flags, char buf[], size_t size) {
--size; /* Leave space for null terminator. */

  switch (e_flags & EF_AVR_MACH)
    {
    case E_AVR_MACH_AVR1:
      strncat (buf, ", avr:1", size);
      break;
    case E_AVR_MACH_AVR2:
      strncat (buf, ", avr:2", size);
      break;
    case E_AVR_MACH_AVR25:
      strncat (buf, ", avr:25", size);
      break;
    case E_AVR_MACH_AVR3:
      strncat (buf, ", avr:3", size);
      break;
    case E_AVR_MACH_AVR31:
      strncat (buf, ", avr:31", size);
      break;
    case E_AVR_MACH_AVR35:
      strncat (buf, ", avr:35", size);
      break;
    case E_AVR_MACH_AVR4:
      strncat (buf, ", avr:4", size);
      break;
    case E_AVR_MACH_AVR5:
      strncat (buf, ", avr:5", size);
      break;
    case E_AVR_MACH_AVR51:
      strncat (buf, ", avr:51", size);
      break;
    case E_AVR_MACH_AVR6:
      strncat (buf, ", avr:6", size);
      break;
    case E_AVR_MACH_AVRTINY:
      strncat (buf, ", avr:100", size);
      break;
    case E_AVR_MACH_XMEGA1:
      strncat (buf, ", avr:101", size);
      break;
    case E_AVR_MACH_XMEGA2:
      strncat (buf, ", avr:102", size);
      break;
    case E_AVR_MACH_XMEGA3:
      strncat (buf, ", avr:103", size);
      break;
    case E_AVR_MACH_XMEGA4:
      strncat (buf, ", avr:104", size);
      break;
    case E_AVR_MACH_XMEGA5:
      strncat (buf, ", avr:105", size);
      break;
    case E_AVR_MACH_XMEGA6:
      strncat (buf, ", avr:106", size);
      break;
    case E_AVR_MACH_XMEGA7:
      strncat (buf, ", avr:107", size);
      break;
    default:
      strncat (buf, ", avr:<unknown>", size);
      break;
    }

So, it looks, for 8-bit AVR, e_machine must be 83 (EM_AVR), while e_flags is one of E_AVR_MACH_XXX constants. You just need to store somewhere E_AVR_MACH_XXX that you read from given ELF file, and compare it with core specified by "-cpu" command line option.

Quoted 545 lines

Yours,
Aleksandar

.

Quoted 540 lines

Best regards, Aleksandar

Quoted 536 lines
Quoted 10 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines
Quoted 518 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 506 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 436 lines

Best regards,

Quoted 435 lines

Akeksandar

Quoted 429 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 383 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 374 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add

instruction translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches

    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control
Instructions
target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

#73 lore raw
Quoted 169 lines · Aleksandar Markovic
Quoted 87 lines · Aleksandar Markovic
Quoted 23 lines · Aleksandar Markovic
Quoted 4 lines · Michael Rolnik

how can I get this elf flags from within QEMU?

Quoted 2 lines

In one of files from your "machine" patch, you have this snippet:

(quoted diff) +2 -0
+        bytes_loaded = load_elf(
+            filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE,

0, 0);

With this line you a kind of "blindly" load whatever you find in the file "filename". I think you need to modify load_elf() to fetch the information on what core the elf in question is compiled for. Additionally, you most likely have to check if the elf file is compiled for AVR at all.

I don't know enough about AVR-specifics of ELF format, but I know that we in MIPS read successfuly some MIPS-specific things we need to know. Do some research for ELF format headrr content for AVR.

Quoted 8 lines

This is really missing in your series, seriously.

Please keep in mind that I don't have right now at hand any dev system, so all I said here is off of my head.

You have to do some code digging.

First, you need to update

https://github.com/qemu/qemu/blob/master/include/elf.h

with bits and pieces for AVR.

In binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/common.h

you will spot the line:

#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */

that is the value of e_machine field for AVR, which you need to insert in qemu's include/elf.h about at line 162.

Then, in another binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/avr.h

you find the lines:

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100
#define E_AVR_MACH_XMEGA1 101
#define E_AVR_MACH_XMEGA2 102
#define E_AVR_MACH_XMEGA3 103
#define E_AVR_MACH_XMEGA4 104
#define E_AVR_MACH_XMEGA5 105
#define E_AVR_MACH_XMEGA6 106
#define E_AVR_MACH_XMEGA7 107

That you also need to insert in qemu's include/elf.h, probably at the end of tge foke or elsewhere.

Perhaps something more you need to insert into that file, you'll see.

Than, you need to modify the file where load_elf() resides with AVR support, take a look at other architectures' support, and adjust to what you need.

Quoted 7 lines

I know it will be contrieved at times, but, personally, similar ELF support must be done for any upcoming platform. Only if there is some unsourmantable obstacle, that support can be omitted.

I am on vacation next 10 days.

In the source of readelf utility:

static void
decode_AVR_machine_flags (unsigned e_flags, char buf[], size_t size) {
--size; /* Leave space for null terminator. */

  switch (e_flags & EF_AVR_MACH)
    {
    case E_AVR_MACH_AVR1:
      strncat (buf, ", avr:1", size);
      break;
    case E_AVR_MACH_AVR2:
      strncat (buf, ", avr:2", size);
      break;
    case E_AVR_MACH_AVR25:
      strncat (buf, ", avr:25", size);
      break;
    case E_AVR_MACH_AVR3:
      strncat (buf, ", avr:3", size);
      break;
    case E_AVR_MACH_AVR31:
      strncat (buf, ", avr:31", size);
      break;
    case E_AVR_MACH_AVR35:
      strncat (buf, ", avr:35", size);
      break;
    case E_AVR_MACH_AVR4:
      strncat (buf, ", avr:4", size);
      break;
    case E_AVR_MACH_AVR5:
      strncat (buf, ", avr:5", size);
      break;
    case E_AVR_MACH_AVR51:
      strncat (buf, ", avr:51", size);
      break;
    case E_AVR_MACH_AVR6:
      strncat (buf, ", avr:6", size);
      break;
    case E_AVR_MACH_AVRTINY:
      strncat (buf, ", avr:100", size);
      break;
    case E_AVR_MACH_XMEGA1:
      strncat (buf, ", avr:101", size);
      break;
    case E_AVR_MACH_XMEGA2:
      strncat (buf, ", avr:102", size);
      break;
    case E_AVR_MACH_XMEGA3:
      strncat (buf, ", avr:103", size);
      break;
    case E_AVR_MACH_XMEGA4:
      strncat (buf, ", avr:104", size);
      break;
    case E_AVR_MACH_XMEGA5:
      strncat (buf, ", avr:105", size);
      break;
    case E_AVR_MACH_XMEGA6:
      strncat (buf, ", avr:106", size);
      break;
    case E_AVR_MACH_XMEGA7:
      strncat (buf, ", avr:107", size);
      break;
    default:
      strncat (buf, ", avr:<unknown>", size);
      break;
    }
Quoted 6 lines

So, it looks, for 8-bit AVR, e_machine must be 83 (EM_AVR), while e_flags is one of E_AVR_MACH_XXX constants. You just need to store somewhere E_AVR_MACH_XXX that you read from given ELF file, and compare it with core specified by "-cpu" command line option.

Looking further into the code, it looks that load_elf() that you use to load given AVR elf file is simply not suitable for reading info you wanr. That is because that function is used for loading kernels for other platforms, and AVR case is quite different you load an executable.

You may want to write your own version of load_elf(), called let's say load_elf_avr() (but place it in AVR-specific location), that will load elf, but aso read e_machine and e_flags fields that you will later pass to appropriate logic, compare with "-cpu" given core, and decide further what to do.

Please take all my advices with reservation, I am writing without a computer dev system.

I am off on vacation!

Take care!

Aleksandar

Quoted 546 lines
Quoted 546 lines

Yours,
Aleksandar

.

Quoted 540 lines

Best regards, Aleksandar

Quoted 536 lines
Quoted 10 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines
Quoted 518 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 506 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 436 lines

Best regards,

Quoted 435 lines

Akeksandar

Quoted 429 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output into

Quoted 10 lines

stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 383 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 374 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6.  fix a register getters/setters in machine.c
7.  changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and
fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add

instruction translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches

    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control
Instructions
target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

#74 lore raw

Aleksandar.

enjoy your vacation.

Regards,
Michael Rolnik

Quoted 751 lines · Aleksandar Markovic
Quoted 169 lines · Aleksandar Markovic
Quoted 87 lines · Aleksandar Markovic
Quoted 23 lines · Aleksandar Markovic
Quoted 4 lines · Michael Rolnik

how can I get this elf flags from within QEMU?

Quoted 2 lines

In one of files from your "machine" patch, you have this snippet:

(quoted diff) +2 -0
+        bytes_loaded = load_elf(
+            filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE,

0, 0);

With this line you a kind of "blindly" load whatever you find in the file "filename". I think you need to modify load_elf() to fetch the information on what core the elf in question is compiled for. Additionally, you most likely have to check if the elf file is compiled for AVR at all.

I don't know enough about AVR-specifics of ELF format, but I know that we in MIPS read successfuly some MIPS-specific things we need to know. Do some research for ELF format headrr content for AVR.

Quoted 8 lines

This is really missing in your series, seriously.

Please keep in mind that I don't have right now at hand any dev system, so all I said here is off of my head.

You have to do some code digging.

First, you need to update

https://github.com/qemu/qemu/blob/master/include/elf.h

with bits and pieces for AVR.

In binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/common.h

you will spot the line:

#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */

that is the value of e_machine field for AVR, which you need to insert in qemu's include/elf.h about at line 162.

Then, in another binutils file:

https://github.com/bminor/binutils-gdb/blob/master/include/elf/avr.h

you find the lines:

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100
#define E_AVR_MACH_XMEGA1 101
#define E_AVR_MACH_XMEGA2 102
#define E_AVR_MACH_XMEGA3 103
#define E_AVR_MACH_XMEGA4 104
#define E_AVR_MACH_XMEGA5 105
#define E_AVR_MACH_XMEGA6 106
#define E_AVR_MACH_XMEGA7 107

That you also need to insert in qemu's include/elf.h, probably at the end of tge foke or elsewhere.

Perhaps something more you need to insert into that file, you'll see.

Than, you need to modify the file where load_elf() resides with AVR support, take a look at other architectures' support, and adjust to what you need.

Quoted 7 lines

I know it will be contrieved at times, but, personally, similar ELF support must be done for any upcoming platform. Only if there is some unsourmantable obstacle, that support can be omitted.

I am on vacation next 10 days.

In the source of readelf utility:

static void
decode_AVR_machine_flags (unsigned e_flags, char buf[], size_t size) {
--size; /* Leave space for null terminator. */

  switch (e_flags & EF_AVR_MACH)
    {
    case E_AVR_MACH_AVR1:
      strncat (buf, ", avr:1", size);
      break;
    case E_AVR_MACH_AVR2:
      strncat (buf, ", avr:2", size);
      break;
    case E_AVR_MACH_AVR25:
      strncat (buf, ", avr:25", size);
      break;
    case E_AVR_MACH_AVR3:
      strncat (buf, ", avr:3", size);
      break;
    case E_AVR_MACH_AVR31:
      strncat (buf, ", avr:31", size);
      break;
    case E_AVR_MACH_AVR35:
      strncat (buf, ", avr:35", size);
      break;
    case E_AVR_MACH_AVR4:
      strncat (buf, ", avr:4", size);
      break;
    case E_AVR_MACH_AVR5:
      strncat (buf, ", avr:5", size);
      break;
    case E_AVR_MACH_AVR51:
      strncat (buf, ", avr:51", size);
      break;
    case E_AVR_MACH_AVR6:
      strncat (buf, ", avr:6", size);
      break;
    case E_AVR_MACH_AVRTINY:
      strncat (buf, ", avr:100", size);
      break;
    case E_AVR_MACH_XMEGA1:
      strncat (buf, ", avr:101", size);
      break;
    case E_AVR_MACH_XMEGA2:
      strncat (buf, ", avr:102", size);
      break;
    case E_AVR_MACH_XMEGA3:
      strncat (buf, ", avr:103", size);
      break;
    case E_AVR_MACH_XMEGA4:
      strncat (buf, ", avr:104", size);
      break;
    case E_AVR_MACH_XMEGA5:
      strncat (buf, ", avr:105", size);
      break;
    case E_AVR_MACH_XMEGA6:
      strncat (buf, ", avr:106", size);
      break;
    case E_AVR_MACH_XMEGA7:
      strncat (buf, ", avr:107", size);
      break;
    default:
      strncat (buf, ", avr:<unknown>", size);
      break;
    }
Quoted 6 lines

So, it looks, for 8-bit AVR, e_machine must be 83 (EM_AVR), while e_flags is one of E_AVR_MACH_XXX constants. You just need to store somewhere E_AVR_MACH_XXX that you read from given ELF file, and compare it with core specified by "-cpu" command line option.

Looking further into the code, it looks that load_elf() that you use to load given AVR elf file is simply not suitable for reading info you wanr. That is because that function is used for loading kernels for other platforms, and AVR case is quite different you load an executable.

You may want to write your own version of load_elf(), called let's say load_elf_avr() (but place it in AVR-specific location), that will load elf, but aso read e_machine and e_flags fields that you will later pass to appropriate logic, compare with "-cpu" given core, and decide further what to do.

Please take all my advices with reservation, I am writing without a computer dev system.

I am off on vacation!

Take care!

Aleksandar

Quoted 550 lines
Quoted 550 lines

Yours,
Aleksandar

.

Quoted 544 lines

Best regards, Aleksandar

Quoted 540 lines
Quoted 11 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik

No, I don't.
but I also can load and execute a binary file which does not have this information.

Quoted 2 lines
Quoted 521 lines

OK. Let's think about that for a while. I currently think you have here an opportunity to add a really clean interface from the outset of AVR support in QEMU (that even some established platforms don't have in full), which is, trust me, very important for future. And it not that difficult to implement at all. But let's both think for a while.

Best regards,
Aleksandar

Quoted 509 lines
Quoted 62 lines · Aleksandar Markovic
Quoted 26 lines · Aleksandar Markovic
Quoted 21 lines · Michael Rolnik

There is *-cpu *option where you can specify what CPU you want, if this option is not specified avr6 (avr6-avr-cpu) is chosen.

*./avr-softmmu/qemu-system-avr -cpu help*
avr1-avr-cpu
avr2-avr-cpu
avr25-avr-cpu
avr3-avr-cpu
avr31-avr-cpu
avr35-avr-cpu
avr4-avr-cpu
avr5-avr-cpu
avr51-avr-cpu
avr6-avr-cpu
xmega2-avr-cpu
xmega4-avr-cpu
xmega5-avr-cpu
xmega6-avr-cpu
xmega7-avr-cpu

Quoted 4 lines

What happens if you specify a core via -cpu, and supply elf file compiled for another core?

It looks there is some related info written in ELF header. This is from a binutils header:

(so it looks you could detect the core from elf file - do you do that detection right now?)

#define E_AVR_MACH_AVR1 1
#define E_AVR_MACH_AVR2 2
#define E_AVR_MACH_AVR25 25
#define E_AVR_MACH_AVR3 3
#define E_AVR_MACH_AVR31 31
#define E_AVR_MACH_AVR35 35
#define E_AVR_MACH_AVR4 4
#define E_AVR_MACH_AVR5 5
#define E_AVR_MACH_AVR51 51
#define E_AVR_MACH_AVR6 6
#define E_AVR_MACH_AVRTINY 100

#define E_AVR_MACH_XMEGA1  101
#define E_AVR_MACH_XMEGA2  102
#define E_AVR_MACH_XMEGA3  103
#define E_AVR_MACH_XMEGA4  104
#define E_AVR_MACH_XMEGA5  105
#define E_AVR_MACH_XMEGA6  106
#define E_AVR_MACH_XMEGA7  107
Quoted 439 lines

Best regards,

Quoted 438 lines

Akeksandar

Quoted 432 lines

Regards,
Michael Rolnik

Quoted 33 lines · Aleksandar Markovic
Quoted 18 lines · Michael Rolnik

This series of patches adds 8bit AVR cores to QEMU. All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board. No fuses support yet. PC is set to 0 at reset.

Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
run telent localhost 5678
3. Continious non interrupted execution with serial output

Quoted 10 lines

into stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S run avr-gdb program.elf and then within GDB shell `target
remote :1234`
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm

Quoted 386 lines

Hi, Michael.

Can you explain to me the mechanisms of recognition of what core/microcontroller QEMU is supposed to emulate in the examples above?

Yours, Aleksandar

Quoted 377 lines

the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores

     avr1
     avr2 avr25
     avr3 avr31 avr35
     avr4
     avr5 avr51
     avr6
     xmega2 xmega4 xmega5 xmega6 xmega7

3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together

changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH

changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)

changes since v5
1. BLD bug fix
2. decoder generator is added

chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret

changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated

changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on

    a. Mac, Apple LLVM version 7.0.0
    b. Ubuntu 12.04, gcc 4.9.2
    c. Fedora 23, gcc 5.3.1

4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory

changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers

changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs

changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from
gen_intermediate_code

changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register &
avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state

changes since v13
1. rebasing to v2.7.0-rc1

changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris

changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32

changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them

changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:

1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.

I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c.
Not that it matters, but the code generated is about 3k smaller.

changes since v18

1.  moving target-avr into target/avr
2.  do not call cpu_exec_initfn function from avr_cpu_initfn
3.  call cpu_exec_realizefn avr_cpu_realizefn
4.  do not fail sample machine creation if no rom is suplied
5.  add tcg_gen_exit_tb(0) for BS_BRANCH in

gen_intermediate_code
6. fix a register getters/setters in machine.c
7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18

changes since v19

1.  use decodetree.py tool to decode instructions
2.  adding USART
3.  adding 16 bit timer peripherals
4.  changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5.  renaming tlb_fill to avr_cpu_tlb_fill

changes since v20

1.  use one CPU naming convention
2.  merging insn16.decode & insn32.decode files
3.  modifying skip next instruction mechanizm
4.  translate BREAK as NOP for now

changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier,
and fixes a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml

changes since v22
1. Rebase
2. Split long comment

changes since v23

1.  remove avr_cpu_list_compare function
2.  modify avr_cpu_class_by_name function
3.  modify avr_cpu_list_entry function
4.  modify avr_cpu_list function

changes since v24
1. remove AVR_CPU_TYPE_NAME macro

changes since v25

1.  fix patches. every file belong to one patch only
2.  change copyright year from 2016 to 2019
3.  create mask device to emulate prr0/prr1

changes since v26
1. add avocado acceptence test
2. add boot serial test

changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size

changes since v28
1. rebase
2. fix includes & build

changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'

changes since v30
1. rebase

changes since v31

1.  splitting 'Add instruction translation' commit
2.  fixing typo in qapi/machine.json sicne -> since
3.  removing unintended changes in configure file
4.  adding Richard Henderson as a co developer to 'Add

instruction translation - CPU main translation funcions' commit

changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z

changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic

changes since v34
1. rebase

changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches

    1.  "target/avr: Register AVR support with the rest of QEMU"
    2.  "target/avr: Update build system"
    3.  "target/avr: Update MAINTAINERS file"

4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"

changes since v36
1. rebase
2. tename

    1.  NO_CPU_REGISTERS    -> NUMBER_OF_CPU_REGISTERS
    2.  NO_IO_REGISTERS     -> NUMBER_OF_IO_REGISTERS
    3.  to_A                -> to_regs_16_31_by_one
    4.  to_B                -> to_regs_16_23_by_one
    5.  to_C                -> to_regs_24_30_by_two
    6.  to_D                -> to_regs_00_30_by_two
3.  add missing licences
4.  add usage example (see above)
5.  ass Sarah Harris <[email protected]> as a reviewer to

MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado test

Michael Rolnik (16):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control
Instructions
target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add example board configuration target/avr: Register AVR support with the rest of QEMU target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file

Sarah Harris (1):
target/avr: Add limited support for USART and 16 bit timer
peripherals

 configure                        |    7 +
 default-configs/avr-softmmu.mak  |    5 +
 qapi/machine.json                |    3 +-
 include/disas/dis-asm.h          |    6 +
 include/hw/char/avr_usart.h      |   97 +
 include/hw/misc/avr_mask.h       |   47 +
 include/hw/timer/avr_timer16.h   |   97 +
 include/sysemu/arch_init.h       |    1 +
 target/avr/cpu-param.h           |   37 +
 target/avr/cpu-qom.h             |   54 +
 target/avr/cpu.h                 |  254 +++
 target/avr/helper.h              |   29 +
 arch_init.c                      |    2 +
 hw/avr/sample.c                  |  282 +++
 hw/char/avr_usart.c              |  324 ++++
 hw/misc/avr_mask.c               |  112 ++
 hw/timer/avr_timer16.c           |  605 ++++++
 target/avr/cpu.c                 |  576 ++++++
 target/avr/disas.c               |  228 +++
 target/avr/gdbstub.c             |   85 +
 target/avr/helper.c              |  354 ++++
 target/avr/machine.c             |  121 ++
 target/avr/translate.c           | 3052
++++++++++++++++++++++++++++++
 tests/boot-serial-test.c         |   10 +
 tests/machine-none-test.c        |    1 +
 MAINTAINERS                      |   11 +
 gdb-xml/avr-cpu.xml              |   49 +
 hw/Kconfig                       |    1 +
 hw/avr/Kconfig                   |    6 +
 hw/avr/Makefile.objs             |    1 +
 hw/char/Kconfig                  |    3 +
 hw/char/Makefile.objs            |    1 +
 hw/misc/Kconfig                  |    3 +
 hw/misc/Makefile.objs            |    2 +
 hw/timer/Kconfig                 |    3 +
 hw/timer/Makefile.objs           |    2 +
 target/avr/Makefile.objs         |   34 +
 target/avr/insn.decode           |  194 ++
 tests/Makefile.include           |    2 +
 tests/acceptance/machine_avr6.py |   56 +
 40 files changed, 6756 insertions(+), 1 deletion(-)
 create mode 100644 default-configs/avr-softmmu.mak
 create mode 100644 include/hw/char/avr_usart.h
 create mode 100644 include/hw/misc/avr_mask.h
 create mode 100644 include/hw/timer/avr_timer16.h
 create mode 100644 target/avr/cpu-param.h
 create mode 100644 target/avr/cpu-qom.h
 create mode 100644 target/avr/cpu.h
 create mode 100644 target/avr/helper.h
 create mode 100644 hw/avr/sample.c
 create mode 100644 hw/char/avr_usart.c
 create mode 100644 hw/misc/avr_mask.c
 create mode 100644 hw/timer/avr_timer16.c
 create mode 100644 target/avr/cpu.c
 create mode 100644 target/avr/disas.c
 create mode 100644 target/avr/gdbstub.c
 create mode 100644 target/avr/helper.c
 create mode 100644 target/avr/machine.c
 create mode 100644 target/avr/translate.c
 create mode 100644 gdb-xml/avr-cpu.xml
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 target/avr/Makefile.objs
 create mode 100644 target/avr/insn.decode
 create mode 100644 tests/acceptance/machine_avr6.py

--
2.17.2 (Apple Git-113)

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

--
Best Regards,
Michael Rolnik

Signature · 2 lines
Best Regards,
Michael Rolnik