Skip to contentSkip to conversation

hostapd: bump to version 2.0

PATCH New Gustavo Zacarias 2 participants 3 messages Jan 18, 2013 – Jan 20, 2013

lore
Share & tools
lore

Gustavo Zacarias

author
#0 lore raw

PATCH 1/2 hostapd: bump to version 2.0

802.11ac support isn't enabled on purpose since it's broken on some architectures.

Signed-off-by Gustavo Zacarias <[email protected]>
---
 package/hostapd/hostapd.mk | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
package/hostapd/hostapd.mk +5 -1
index b18881a..e00ad5a 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-HOSTAPD_VERSION = 1.1
+HOSTAPD_VERSION = 2.0
 HOSTAPD_SITE = http://hostap.epitest.fi/releases
 HOSTAPD_SUBDIR = hostapd
 HOSTAPD_CONFIG = $(HOSTAPD_DIR)/$(HOSTAPD_SUBDIR)/.config

@@ -21,6 +21,7 @@ endif
 
 define HOSTAPD_LIBNL_CONFIG
 	echo 'CONFIG_LIBNL32=y' >>$(HOSTAPD_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_VLAN_NETLINK.*\)/\2/' $(HOSTAPD_CONFIG)
 endef
 
 define HOSTAPD_LIBTOMMATH_CONFIG

@@ -52,6 +53,7 @@ define HOSTAPD_EAP_CONFIG
 	$(SED) 's/\(#\)\(CONFIG_EAP_SIM.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_EAP_TNC.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_RADIUS_SERVER.*\)/\2/' $(HOSTAPD_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_TLSV1.*\)/\2/' $(HOSTAPD_CONFIG)
 endef
 ifneq ($(BR2_INET_IPV6),y)
 define HOSTAPD_RADIUS_IPV6_CONFIG

@@ -75,8 +77,10 @@ endif
 define HOSTAPD_CONFIGURE_CMDS
 	cp $(@D)/hostapd/defconfig $(HOSTAPD_CONFIG)
 # Misc
+	$(SED) 's/\(#\)\(CONFIG_HS20.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_IEEE80211N.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_IEEE80211R.*\)/\2/' $(HOSTAPD_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_IEEE80211W.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_INTERWORKING.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_FULL_DYNAMIC_VLAN.*\)/\2/' $(HOSTAPD_CONFIG)
 	$(HOSTAPD_LIBTOMMATH_CONFIG)
Signature · 1 line
1.7.12.4
author
#1 lore raw

PATCH 2/2 wpa_supplicant: bump to version 2.0

Signed-off-by Gustavo Zacarias <[email protected]>
---
 package/wpa_supplicant/wpa_supplicant.mk | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
package/wpa_supplicant/wpa_supplicant.mk +4 -1
index 02ca125..762ceaf 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-WPA_SUPPLICANT_VERSION = 1.1
+WPA_SUPPLICANT_VERSION = 2.0
 WPA_SUPPLICANT_SITE = http://hostap.epitest.fi/releases
 WPA_SUPPLICANT_LICENSE = GPLv2/BSD-3c
 WPA_SUPPLICANT_LICENSE_FILES = README

@@ -37,6 +37,7 @@ define WPA_SUPPLICANT_EAP_CONFIG
 	$(SED) 's/\(#\)\(CONFIG_EAP_SAKE.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_EAP_SIM.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_EAP_TNC.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_TLSV1.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 endef
 else
 define WPA_SUPPLICANT_EAP_CONFIG

@@ -117,8 +118,10 @@ endif
 
 define WPA_SUPPLICANT_CONFIGURE_CMDS
 	cp $(@D)/wpa_supplicant/defconfig $(WPA_SUPPLICANT_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_HS20.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_IEEE80211N.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_IEEE80211R.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
+	$(SED) 's/\(#\)\(CONFIG_IEEE80211W.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_INTERWORKING.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(#\)\(CONFIG_DELAYED_MIC.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
 	$(SED) 's/\(CONFIG_DRIVER_ATMEL\)/#\1/' $(WPA_SUPPLICANT_CONFIG)
Signature · 1 line
1.7.12.4
#2 lore raw

PATCH 1/2 hostapd: bump to version 2.0

In reply to Gustavo Zacarias
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Gustavo" == Gustavo Zacarias <[email protected]> writes:

Gustavo> 802.11ac support isn't enabled on purpose since it's broken on some Gustavo> architectures.

Committed both, thanks.

Signature · 1 line
Bye, Peter Korsgaard