Building fw_printenv (u-boot utility) for target?
I want fw_printenv on my target, and it would be convenient if buildroot built it and set up the relvent links. But, AFAICT, I can't have buildroot build the fw_printenv utility without having it do a complete build of U-Boot. I don't have any need/desire for buildroot to build the bootloader itself, I only need the fw_printenv linux app for the target. Is that possible with buildroot?
Or should I just build fw_printenv separately and stick it into the filesystem using the custom package?
Signature · 3 lines
Grant Edwards grant.b.edwards Yow! Don't SANFORIZE me!!
at
gmail.com Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Grant" == Grant Edwards <[email protected]> writes:
Hi,
Grant> I want fw_printenv on my target, and it would be convenient if Grant> buildroot built it and set up the relvent links. But, AFAICT, I can't Grant> have buildroot build the fw_printenv utility without having it do a Grant> complete build of U-Boot. I don't have any need/desire for buildroot Grant> to build the bootloader itself, I only need the fw_printenv linux app Grant> for the target. Is that possible with buildroot?
Currently not, is it a big deal to build u-boot as well?
The reason for this is mainly that fw_printenv isn't available seperately, so we would need to double quite a lot of the u-boot handling if we were to move it to a seperate package, and they are most of the time used together.
Grant> Or should I just build fw_printenv separately and stick it into the Grant> filesystem using the custom package?
That's naturally an option as well.
Signature · 1 line
Bye, Peter Korsgaard
Quoted 10 lines · Peter Korsgaard
Quoted 6 lines · Grant Edwards
I want
fw_printenvon my target, and it would be convenient if buildroot built it and set up the relvent links. But, AFAICT, I can't have buildroot build thefw_printenvutility without having it do a complete build of U-Boot. I don't have any need/desire for buildroot to build the bootloader itself, I only need thefw_printenvlinux app for the target. Is that possible with buildroot?Currently not, is it a big deal to build u-boot as well?
Mainly it's a hassle because it adds quite a bit to the build time.
Currently, I change my rootfs far more often than I change the U-Boot sources or configuration. Doing a U-Boot rebuild every time I change my root filesystem wastes a lot of time.
Quoted 4 lines
The reason for this is mainly that
fw_printenvisn't available seperately, so we would need to double quite a lot of the u-boot handling if we were to move it to a seperate package, and they are most of the time used together.
That makes sense.
Quoted 4 lines
Quoted 2 lines
Or should I just build
fw_printenvseparately and stick it into the filesystem using the custom package?That's naturally an option as well.
I guess I'll stick with that.
Thanks.
Signature · 3 lines
Grant Edwards grant.b.edwards Yow! Do you guys know we
at just passed thru a BLACK
gmail.com HOLE in space?