Skip to contentSkip to conversation

docs: admin-guide: Add information about intel_pstate active mode

PATCH Applied Natesh Sharma 2 participants 3 messages Apr 27, 2023 – May 19, 2023 1 message not in the archive Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 docs: admin-guide: Add information about intel_pstate active mode

Information about intel_pstate active mode is added in the doc. This operation mode could be used to set on the hardware when it's not activated. Status of the mode could be checked from sysfs file i.e., /sys/devices/system/cpu/intel_pstate/status.
The information is already available in cpu-freq/intel-pstate.txt documentation.

---
 Documentation/admin-guide/kernel-parameters.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +8 -0
index bbecbd5797a3..10f3c8d1bb46 100644
@@ -2104,6 +2104,14 @@
 			disable
 			  Do not enable intel_pstate as the default
 			  scaling driver for the supported processors
+                        active
+                          Use intel_pstate driver to bypass the scaling governors
+                          layer of cpufreq and provides it own algorithms for p-state
+                          selection. There are two P-state selection algorithms provided
+                          by intel_pstate in the active mode: powersave and performance.
+                          The way they both operate depends on whether or not the hardware
+                          managed P-states (HWP) feature has been enabled in the processor
+                          and possibly on the processor model.
 			passive
 			  Use intel_pstate as a scaling driver, but configure it
 			  to work with generic cpufreq governors (instead of
Signature · 1 line
2.39.2 (Apple Git-143)

A message that is not in the archive (sent off-list or not yet received): CACY8qCSVcLkDGWCVmZ9-fhaax7FQdY=FS4MGyy_-wo3Qc_CSig@mail.gmail.com

maintainer
#2 lore raw
Quoted 1 line · Natesh Sharma

Just a gentle reminder if the request has been missed out!

You need to wait more than four days before sending "gentle reminders" - even when the merge window is not open, which it currently is.

Thanks,

jon

maintainer Applied
#3 lore raw
In reply to Natesh Sharma
Quoted 7 lines · Natesh Sharma

Information about intel_pstate active mode is added in the doc. This operation mode could be used to set on the hardware when it's not activated. Status of the mode could be checked from sysfs file i.e., /sys/devices/system/cpu/intel_pstate/status.
The information is already available in cpu-freq/intel-pstate.txt documentation.

Quoted 6 lines
---
 Documentation/admin-guide/kernel-parameters.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

I have applied this - after reformatting the new text to stay within 80 columns and removing the obsolete documentation link.

Thanks,

jon