arm64: dts: renesas: r8a77995: draak: add R-Car Sound support
v3 cover arm64: dts: renesas: r8a77995: draak: add R-Car Sound support
Hi Geert
These are v3 of R-Car D3 Sound support patch-set. It is based on latest ALSA SoC branch (= asoc/for-5.14).
asoc
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
v1 -> v2
- ZA2 clock is based on PLL0D3 clock
- move SW60 comment to related block
- tidyup git-log typo
- based on latest ALSA SoC
* don't have null_clock (= audio_clk_c)
* no more DT warning
v2 -> v3
- alphabetical / numerical sort order on both r8a77995.dts, r8a77995-draak.dts
Kuninori Morimoto (3):
clk: renesas: r8a77995: Add ZA2 clock
arm64: dts: renesas: r8a77995: add R-Car Sound support
arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
.../arm64/boot/dts/renesas/r8a77995-draak.dts | 111 ++++++++++++ arch/arm64/boot/dts/renesas/r8a77995.dtsi | 166 ++++++++++++++++++ drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 + 3 files changed, 278 insertions(+)
Signature · 1 line
2.25.1
PATCH v3 1/3 clk: renesas: r8a77995: Add ZA2 clock
From: Kuninori Morimoto <[email protected]>
R-Car D3 ZA2 clock is from PLL0D3 or S0,
and it can be controlled by ZA2CKCR.
It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it by DEF_FIXED().
--- drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/renesas/r8a77995-cpg-mssr.c +1 -0
@@ -75,6 +75,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {DEF_RATE (".oco" ,CLK_OCO ,8 *1000 *1000 ),/* Core Clock Outputs */ +DEF_FIXED ("za2" ,R8A77995_CLK_ZA2 ,CLK_PLL0D3 ,2 ,1 ),DEF_FIXED ("z2" ,R8A77995_CLK_Z2 ,CLK_PLL0D3 ,1 ,1 ),DEF_FIXED ("ztr" ,R8A77995_CLK_ZTR ,CLK_PLL1 ,6 ,1 ), DEF_FIXED("zt", R8A77995_CLK_ZT, CLK_PLL1, 4, 1),
Signature · 1 line
2.25.1
Re: [PATCH v3 1/3] clk: renesas: r8a77995: Add ZA2 clock
Quoted 11 lines · Kuninori Morimoto
From: Kuninori Morimoto <[email protected]>
R-Car D3 ZA2 clock is from PLL0D3 or S0,
and it can be controlled by ZA2CKCR.
It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it byDEF_FIXED().
i.e. will queue in renesas-clk-for-v5.14.
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
PATCH v3 2/3 arm64: dts: renesas: r8a77995: add R-Car Sound support
In reply to Kuninori MorimotoFrom: Kuninori Morimoto <[email protected]>
This patch adds R-Car Sound and Audio-DMAC support for D3. One note is that D3's SSI0-2 and SRC0-4 are not connected.
--- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 166 ++++++++++++++++++++++ 1 file changed, 166 insertions(+)
arch/arm64/boot/dts/renesas/r8a77995.dtsi +166 -0
@@ -15,6 +15,23 @@ / { #address-cells = <2>; #size-cells = <2>; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock";
@@ -1015,6 +1032,155 @@ vin4: video@e6ef4000 { status = "disabled"; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.4", "ssi.3", + "src.6", "src.5", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_i"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1011>, <&cpg 1012>; + reset-names = "ssi-all", + "ssi.4", "ssi.3"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { status = "disabled"; }; + src1: src-1 { status = "disabled"; }; + src2: src-2 { status = "disabled"; }; + src3: src-3 { status = "disabled"; }; + src4: src-4 { status = "disabled"; }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { status = "disabled"; }; + ssi1: ssi-1 { status = "disabled"; }; + ssi2: ssi-2 { status = "disabled"; }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>;
Signature · 1 line
2.25.1
Re: [PATCH v3 2/3] arm64: dts: renesas: r8a77995: add R-Car Sound support
Hi Morimoto-san,
Quoted 8 lines · Kuninori Morimoto
From: Kuninori Morimoto <[email protected]>
This patch adds R-Car Sound and Audio-DMAC support for D3. One note is that D3's SSI0-2 and SRC0-4 are not connected.
Thanks for your patch!
Quoted 72 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +66
-0@@ -1015,6 +1032,155 @@ vin4: video@e6ef4000 { status = "disabled"; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.4", "ssi.3", + "src.6", "src.5", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_i"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1011>, <&cpg 1012>; + reset-names = "ssi-all", + "ssi.4", "ssi.3"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix {
arch/arm64/boot/dts/renesas/r8a77995.dtsi vin4: video@e6ef4000 { · line 1110
Quoted 10 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +10
-0+ mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { status = "disabled"; }; + src1: src-1 { status = "disabled"; }; + src2: src-2 { status = "disabled"; }; + src3: src-3 { status = "disabled"; }; + src4: src-4 { status = "disabled"; };
Please drop nonexistent src channels.
Quoted 6 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +6
-0+ src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 {
arch/arm64/boot/dts/renesas/r8a77995.dtsi vin4: video@e6ef4000 { · line 1126
Quoted 10 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +10
-0+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { status = "disabled"; }; + ssi1: ssi-1 { status = "disabled"; }; + ssi2: ssi-2 { status = "disabled"; };
Please drop nonexistent ssi channels.
Quoted 4 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +4
-0+ ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>;
arch/arm64/boot/dts/renesas/r8a77995.dtsi vin4: video@e6ef4000 { · line 1140
Quoted 10 lines
arch/arm64/boot/dts/renesas/r8a77995.dtsi +10
-0+ dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + };
With the above fixed:
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH v3 3/3 arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
In reply to Kuninori MorimotoFrom: Kuninori Morimoto <[email protected]>
This patch adds R-Car Sound support for D3 draak.
One note is that it is using different clock definition style from ulcb/salvator boards to avoid verbose clocks settings on rcar_sound node (see ulcb.dtsi rcar_sound::clocks).
cs2000 and ADG are cross connected, and need each other. ulcb/salvator boards assume drivers are probed cs2000 -> rcar_sound. This draak board assumes drivers are probed rcar_sound -> cs2000.
--- .../arm64/boot/dts/renesas/r8a77995-draak.dts | 111 ++++++++++++++++++ 1 file changed, 111 insertions(+)
arch/arm64/boot/dts/renesas/r8a77995-draak.dts +111 -0
@@ -124,6 +124,14 @@ reg_12p0v: regulator-12p0v { regulator-always-on; }; + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + vga { compatible = "vga-connector";
@@ -161,6 +169,34 @@ x12_clk: x12 { #clock-cells = <0>; clock-frequency = <74250000>; }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_a { + /* + * This is same as cs2000, + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + + clock-frequency = <24576000>; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; }; &avb {
@@ -236,6 +272,28 @@ &i2c0 { pinctrl-names = "default"; status = "okay"; + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>;
@@ -342,6 +400,17 @@ adv7612_out: endpoint { }; }; + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&rcar_sound 1>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>;
@@ -449,6 +518,17 @@ sdhi2_pins_uhs: sd2_uhs { power-source = <1800>; }; + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0";
@@ -474,6 +554,33 @@ &pwm1 { status = "okay"; }; +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay";
@@ -502,6 +609,10 @@ &sdhi2 { status = "okay"; }; +&ssi4 { + shared-pin; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default";
Signature · 1 line
2.25.1
Re: [PATCH v3 3/3] arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
Quoted 8 lines · Kuninori Morimoto
From: Kuninori Morimoto <[email protected]>
This patch adds R-Car Sound support for D3 draak.
One note is that it is using different clock definition style from ulcb/salvator boards to avoid verbose clocks settings on
rcar_soundnode (seeulcb.dtsircar_sound::clocks).
Quoted 7 lines
cs2000 and ADG are cross connected, and need each other. ulcb/salvator boards assume drivers are probed cs2000 ->
rcar_sound. This draak board assumes drivers are probedrcar_sound-> cs2000.
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert
Quoted 2 lines
These are v3 of R-Car D3 Sound support patch-set. It is based on latest ALSA SoC branch (= asoc/for-5.14).
I have ready to post v4 which needs latest ALSA SoC branch. But should it be posted *after* next merge-window ?
Thank you for your help !!
Best regards
---
Kuninori Morimoto
Hi Morimoto-san,
Quoted 5 lines · Kuninori Morimoto
Quoted 2 lines
These are v3 of R-Car D3 Sound support patch-set. It is based on latest ALSA SoC branch (= asoc/for-5.14).
I have ready to post v4 which needs latest ALSA SoC branch. But should it be posted *after* next merge-window ?
You can always post it earlier, with a comment clearly stating the dependencies.
My actions will depend on the exact meaning of "needs", and if applying it now can create a regression or not,
1. With ALSA SoC from upstream, R-Car D3 Sound just doesn't work yet, as before, or works partially (no regression):
=> Can queue in renesas-devel for v5.14.
2. With ALSA SoC from upstream, the sound driver will crash (regression):
=> Postpone queueing until after the release of v5.14-rc1. => Can still queue in a topic branch for renesas-drivers,
as this includes the latest ALSA SoC branch.
Thanks!
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds