Skip to contentSkip to conversation

Interest in getting ath10k-ct firmware support upstream?

DISCUSSION Ben Greear 2 participants 3 messages Mar 22, 2018 – Apr 13, 2018 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Hello Kalle,

I'm in the midst of porting my out-of-tree ath10k patches forward to the 4.16 kernel.

In case you are interested in allowing support for ath10k-ct firmware in the upstream kernel, now would be a good time for me to work on this.

Please let me know if you are interested.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 8 lines · Ben Greear

I'm in the midst of porting my out-of-tree ath10k patches forward to the 4.16 kernel.

In case you are interested in allowing support for ath10k-ct firmware in the upstream kernel, now would be a good time for me to work on this.

Please let me know if you are interested.

I don't really know what is needed for your firmware so difficult to really comment. And ath10k really does not support any specific firmware branch per se, it uses more finegrained feature based detection anyway.

But as we are adding SDIO, USB and SNOC busses to ath10k, which is quite a enourmous task itself, and trying to support even a different firmware sounds really difficult.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author
#2 lore raw
Quoted 11 lines · Kalle Valo
Quoted 8 lines · Ben Greear

I'm in the midst of porting my out-of-tree ath10k patches forward to the 4.16 kernel.

In case you are interested in allowing support for ath10k-ct firmware in the upstream kernel, now would be a good time for me to work on this.

Please let me know if you are interested.

Quoted 7 lines

I don't really know what is needed for your firmware so difficult to really comment. And ath10k really does not support any specific firmware branch per se, it uses more finegrained feature based detection anyway.

But as we are adding SDIO, USB and SNOC busses to ath10k, which is quite a enourmous task itself, and trying to support even a different firmware sounds really difficult.

I have lots of mostly small tweaks, enabled by feature flags specific to my firmware. Adding my changes will increase the code size a bit, but I don't think it will add much fundamental complexity.

If you will accept feature flags upstream for my firmware and will make an effort to review patches in a timely manner, I will work on a patch series and send it for review.

Thanks,
Ben

Signature · 7 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k