linux-firmware: bump version
PATCH 1/1 linux-firmware: bump version
And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at last.
--- package/linux-firmware/linux-firmware.mk | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/linux-firmware/linux-firmware.mk +3 -2
@@ -4,7 +4,7 @@ # ################################################################################ -LINUX_FIRMWARE_VERSION = c883a6b6186bb2415761d287cbac773062911212 +LINUX_FIRMWARE_VERSION = c4c07a8d1128d50a5c2885ceea1abbebaa82f820 LINUX_FIRMWARE_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git LINUX_FIRMWARE_SITE_METHOD = git
@@ -381,7 +381,8 @@ LINUX_FIRMWARE_FILES += \ brcm/brcmfmac43242a.bin brcm/brcmfmac43340-sdio.bin \ brcm/brcmfmac43362-sdio.bin brcm/brcmfmac43455-sdio.bin \ brcm/brcmfmac43569.bin brcm/brcmfmac43570-pcie.bin \ - brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin + brcm/brcmfmac43602-pcie.ap.bin brcm/brcmfmac43602-pcie.bin \ + brcm/brcmfmac43430-sdio.bin LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.broadcom_bcm43xx endif
Signature · 1 line
2.7.3
PATCH 1/1 linux-firmware: bump version
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at last.
Signed-off-by Gustavo Zacarias <[email protected]>
Committed, thanks.
Will you send a patch to add BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX to the rpi3 defconfig?
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 linux-firmware: bump version
Quoted 4 lines · Peter Korsgaard
Committed, thanks.
Will you send a patch to add
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXto the rpi3 defconfig?
Hi.
Well, without some $WiFi package (hostapd, wpa_supplicant, wireless-tools) just copying the firmware serves no purpose, though it can be done for completeness.
That being said, i lack a rpi3.
Regards.
PATCH 1/1 linux-firmware: bump version
Quoted 4 lines · Gustavo Zacarias
Quoted 2 lines · Peter Korsgaard
Committed, thanks.
Quoted 8 lines
Quoted 2 lines
Will you send a patch to add
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXto the rpi3 defconfig?Hi.
Well, without some $WiFi package (hostapd,wpa_supplicant, wireless-tools) just copying the firmware serves no purpose, though it can be done for completeness.
That being said, i lack a rpi3.
And unless that changed recently, just the .bin the patch added wouldn't be sufficient for Pi 3.
Also need:
https://github.com/RPi-Distro/firmware-nonfree/blob/master/brcm80211/brcm/brcmfmac43430-sdio.txt
Yours sincerely,
Floris Bos
PATCH 1/1 linux-firmware: bump version
Quoted 16 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Floris" == Floris Bos <[email protected]> writes:
Quoted 4 lines · Gustavo Zacarias
Quoted 2 lines · Peter Korsgaard
Committed, thanks.
Quoted 8 lines
Quoted 2 lines
Will you send a patch to add
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXto the rpi3 defconfig?Hi.
Well, without some $WiFi package (hostapd,wpa_supplicant, wireless-tools) just copying the firmware serves no purpose, though it can be done for completeness.
That being said, i lack a rpi3.
Quoted 4 lines
And unless that changed recently, just the .bin the patch added wouldn't be sufficient for Pi 3.
Also need:
https://github.com/RPi-Distro/firmware-nonfree/blob/master/brcm80211/brcm/brcmfmac43430-sdio.txt
Hmm, perhaps. Do you have a rpi 3 to test on? The linux-firmware commit doesn't mention anything about it:
But the kernel does reference the .txt file as well:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:BRCMF_FW_NVRAM_DEF(43430, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt");
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 linux-firmware: bump version
Quoted 19 lines · Peter Korsgaard
Quoted 14 lines · Gustavo Zacarias
Quoted 12 lines · Peter Korsgaard
Quoted 5 lines
Committed, thanks.
Will you send a patch to add
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXto the rpi3 defconfig?Hi.
Well, without some $WiFi package (hostapd,wpa_supplicant, wireless-tools) just copying the firmware serves no purpose, though it can be done for completeness.
That being said, i lack a rpi3.Quoted 4 lines
And unless that changed recently, just the .bin the patch added wouldn't be sufficient for Pi 3.
Also need:
https://github.com/RPi-Distro/firmware-nonfree/blob/master/brcm80211/brcm/brcmfmac43430-sdio.txt
Quoted 4 lines
Hmm, perhaps. Do you have a rpi 3 to test on? The linux-firmware commit doesn't mention anything about it:
==
[ 6.785594] usbcore: registered new interface driver brcmfmac [ 6.786851] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2 [ 7.789831] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 8.802492] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
clkctl 0x50
==
Again, maybe they changed things very recently in a newer kernel branch or something.
But it simply does not work with the standard rpi one unless you also have the .txt
Yours sincerely,
Floris Bos
PATCH 1/1 linux-firmware: bump version
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Floris" == Floris Bos <[email protected]> writes:
Hi,
Quoted 12 lines
Quoted 4 lines
Hmm, perhaps. Do you have a rpi 3 to test on? The linux-firmware commit doesn't mention anything about it:
==
[ 6.785594] usbcore: registered new interface driver brcmfmac [ 6.786851] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2 [ 7.789831] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 8.802492] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
Quoted 7 lines
clkctl
0x50
==Again, maybe they changed things very recently in a newer kernel branch or something.
But it simply does not work with the standard rpi one unless you also have the .txt
Ok, thanks. Does it work with the .bin file from linux-firmware and the .txt file from RPi-Distro?
Signature · 2 lines
Venlig hilsen, Peter Korsgaard
PATCH 1/1 linux-firmware: bump version
Quoted 18 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Floris" == Floris Bos <[email protected]> writes:
Hi,
Quoted 14 lines
Quoted 4 lines
Hmm, perhaps. Do you have a rpi 3 to test on? The linux-firmware commit doesn't mention anything about it:
==
[ 6.785594] usbcore: registered new interface driver brcmfmac [ 6.786851] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2 [ 7.789831] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 8.802492] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):clkctl
0x50
==
Quoted 7 lines
Quoted 4 lines
Again, maybe they changed things very recently in a newer kernel branch or something.
But it simply does not work with the standard rpi one unless you also have the .txtOk, thanks. Does it work with the .bin file from linux-firmware and the .txt file from RPi-Distro?
Yes, that combination does work.
Yours sincerely,
Floris Bos
PATCH 1/1 linux-firmware: bump version
In reply to Gustavo ZacariasQuoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Quoted 2 lines · Peter Korsgaard
Committed, thanks.
Quoted 7 lines
Quoted 2 lines
Will you send a patch to add
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXto the rpi3 defconfig?Hi.
Well, without some $WiFi package (hostapd,wpa_supplicant, wireless-tools) just copying the firmware serves no purpose, though it can be done for completeness.
True. We already enable wpa-supplicant for a number of defconfigs, so probably that is the best option.
Quoted 1 line
That being said, i lack a rpi3.
Me too.
Signature · 2 lines
Venlig hilsen, Peter Korsgaard