configs: add Freescale i.MX 6SoloLite EVK support
PATCH v2 1/2 configs: add Freescale i.MX 6SoloLite EVK support
i.MX6 SoloLite EVK is Freescale's evaluation board based on the i.MX6 SoloLite applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com and SW release 3.0.35_4.1.0.
---
Changes v1 -> v2:
- Removed static device nodes support
configs/freescale_imx6sololiteevk_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 configs/freescale_imx6sololiteevk_defconfig
configs/freescale_imx6sololiteevk_defconfig new file +14 -0
@@ -0,0 +1,14 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" +BR2_LINUX_KERNEL_DEFCONFIG="imx6s" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6sl_evk" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
Signature · 1 line
1.7.10.4
PATCH v2 2/2 configs: add Freescale SABRE-SD board support
SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board based on the i.MX 6Quad ARM Cortex-A9 applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com and SW release 3.0.35_4.1.0.
---
Changes v1 -> v2:
- Removed static device nodes support
configs/freescale_imx6sabresd_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 configs/freescale_imx6sabresd_defconfig
configs/freescale_imx6sabresd_defconfig new file +14 -0
@@ -0,0 +1,14 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" +BR2_LINUX_KERNEL_DEFCONFIG="imx6" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6q_sabresd" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
Signature · 1 line
1.7.10.4
PATCH v2 1/2 configs: add Freescale i.MX 6SoloLite EVK support
In reply to Gilles TalisQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gilles" == Gilles Talis <[email protected]> writes:
Gilles> i.MX6 SoloLite EVK is Freescale's evaluation board based on Gilles> the i.MX6 SoloLite applications processor.
Gilles> This defconfig is based off Freescale "official" git repo on Gilles> git.freescale.com and SW release 3.0.35_4.1.0.
Committed both with a few comments added to the defconfig like we do for the others - Thanks.
Signature · 1 line
Bye, Peter Korsgaard