fis: make fis list more like RedBoot's output
PATCH 1/1 fis: make fis list more like RedBoot's output
The output of 'fis list' does not fit cleanly on an 80 column terminal. This modifies the output to fit and more closely resemble the output from RedBoot.
---
package/fis/fis-003-list_output.patch new file +21 -0
@@ -0,0 +1,21 @@ +--- fis.orig/fis.c 2010-05-12 10:22:10.000000000 -0700 ++++ fis/fis.c 2010-05-12 10:19:24.000000000 -0700 +@@ -142,8 +142,8 @@ + + static void dump_desc(FILE* f, const struct fis_image_desc* d) + { +- fprintf(f,"%16s: flash: 0x%08x mem:0x%08x size:0x%08x checksum:0x%08x\n", +- d->name, d->flash_base, d->mem_base, d->size, d->file_cksum); ++ fprintf(f,"%-16s 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", ++ d->name, d->flash_base, d->mem_base, d->size, d->entry_point, d->file_cksum); + for (unsigned int i=0; i<(sizeof(d->skips)/4); ++i) { + if (d->skips[i]==0x736b6970 || d->skips[i]==0x70696b73) { // "skip" + uint32_t offset = d->skips[i+1]; +@@ -400,6 +400,7 @@ + CHECK(fd=open(device,O_RDONLY),-1); + dir_t dir; + load_dir(fd,offset,&size,swap_endianness,&dir); ++ fprintf(stdout,"Name FLASH addr Mem addr Length Entry point Checksum\n"); + FOR_EACH_DIR_ENTRY(dir,i) { + dump_desc(stdout,get(i)); + }
PATCH v2 1/1 fis: make fis list more like RedBoot's output
The output of 'fis list' does not fit cleanly on an 80 column terminal. This modifies the output to fit and more closely resemble the output from RedBoot.
---
Sorry, the first patch was based on a change in my tree. Here is the patch based on the Buildroot git tree.
package/fis/fis-003-list_output.patch new file +21 -0
@@ -0,0 +1,21 @@ +--- fis.orig/fis.c 2010-05-12 10:22:10.000000000 -0700 ++++ fis/fis.c 2010-05-12 10:19:24.000000000 -0700 +@@ -142,8 +142,8 @@ + + static void dump_desc(FILE* f, const struct fis_image_desc* d) + { +- fprintf(f,"%16s: flash addr = 0x%08x, mem addr = 0x%08x, size = 0x%08x, checksum = 0x%08x\n", +- d->name, d->flash_base, d->mem_base, d->size, d->file_cksum); ++ fprintf(f,"%-16s 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", ++ d->name, d->flash_base, d->mem_base, d->size, d->entry_point, d->file_cksum); + for (unsigned int i=0; i<(sizeof(d->skips)/4); ++i) { + if (d->skips[i]==0x736b6970 || d->skips[i]==0x70696b73) { // "skip" + uint32_t offset = d->skips[i+1]; +@@ -400,6 +400,7 @@ + CHECK(fd=open(device,O_RDONLY),-1); + dir_t dir; + load_dir(fd,offset,&size,swap_endianness,&dir); ++ fprintf(stdout,"Name FLASH addr Mem addr Length Entry point Checksum\n"); + FOR_EACH_DIR_ENTRY(dir,i) { + dump_desc(stdout,get(i)); + }
PATCH v2 1/1 fis: make fis list more like RedBoot's output
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"H" == H Hartley Sweeten <[email protected]> writes:
H> The output of 'fis list' does not fit cleanly on an 80 column H> terminal. This modifies the output to fit and more closely H> resemble the output from RedBoot.
H> Signed-off-by: H Hartley Sweeten <[email protected]>
Sorry for the very slow response - Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard