arm: imx: Switch Wandboard to use config_distro_bootcmd.h.

index 6e8aec2..67d5a6a 100644
@@ -95,6 +95,7 @@
 	"fdtfile=undefined\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \

@@ -199,9 +200,23 @@
 			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"ramdiskaddr=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
 	   "run findfdt; " \
+	   "run distro_bootcmd; " \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \

@@ -213,6 +228,9 @@
 		   "fi; " \
 	   "else run netboot; fi"
 
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

index 6e8aec2..b87ca77 100644
@@ -88,19 +88,15 @@
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"splashpos=m,m\0" \
 	"fdtfile=undefined\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \

@@ -115,8 +111,6 @@
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}; run videoargs\0" \
 	"videoargs=" \
 		"setenv nextcon 0; " \
 		"if hdmidet; then " \

@@ -143,51 +137,6 @@
 			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
 		"fi; " \
 		"setenv bootargs ${bootargs} ${fbmem}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
 	"findfdt="\
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \

@@ -199,19 +148,26 @@
 			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"ramdiskaddr=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
 	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	   "run distro_bootcmd"
+
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1