Skip to contentSkip to conversation

ath9k patches

PATCH In review Sujith Manoharan 2 participants 8 messages Feb 2, 2015 – Feb 6, 2015 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

cover ath9k patches

From: Sujith Manoharan <[email protected]>

ath9k patches for -next.

Sujith Manoharan (6):
ath9k: Add support for more WOW patterns
ath9k: Register correct WOW details with mac80211
ath9k: Fix issues with WoW enable
ath9k: Program AR_WA correctly
ath9k: Clear TSF2 properly
ath9k: Choose correct rate for 2GHz channel

 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 281 ++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/hw.h         |   3 +-
 drivers/net/wireless/ath/ath9k/reg.h        |   2 +
 drivers/net/wireless/ath/ath9k/reg_wow.h    |  39 +++-
 drivers/net/wireless/ath/ath9k/wow.c        |  16 +-
 5 files changed, 200 insertions(+), 141 deletions(-)
Signature · 1 line
2.2.2
#1 lore raw

PATCH 1/6 ath9k: Add support for more WOW patterns

From: Sujith Manoharan <[email protected]>

Newer chips like WB222, WB335 support more than
8 user-configurable patterns. This patch adds
support for it by setting up the correct HW
registers.

---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 48 +++++++++++++----------------
 drivers/net/wireless/ath/ath9k/hw.h         |  1 +
 drivers/net/wireless/ath/ath9k/reg_wow.h    | 34 ++++++++++++++++++++
 3 files changed, 56 insertions(+), 27 deletions(-)
drivers/net/wireless/ath/ath9k/ar9003_wow.c +21 -27
index d2a4f6f..4b53d0b 100644
@@ -100,9 +100,11 @@ int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 	if (pattern_count >= ah->wow.max_patterns)
 		return -ENOSPC;
 
-	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+	if (pattern_count < MAX_NUM_PATTERN_LEGACY)
+		REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+	else
+		REG_SET_BIT(ah, AR_MAC_PCU_WOW4, BIT(pattern_count - 8));
 
-	/* set the registers for pattern */
 	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
 		memcpy(&pattern_val, user_pattern, 4);
 		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
@@ -110,47 +112,39 @@ int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 		user_pattern += 4;
 	}
 
-	/* set the registers for mask */
 	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
 		memcpy(&mask_val, user_mask, 4);
 		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
 		user_mask += 4;
 	}
 
-	/* set the pattern length to be matched
-	 *
-	 * AR_WOW_LENGTH1_REG1
-	 * bit 31:24 pattern 0 length
-	 * bit 23:16 pattern 1 length
-	 * bit 15:8 pattern 2 length
-	 * bit 7:0 pattern 3 length
-	 *
-	 * AR_WOW_LENGTH1_REG2
-	 * bit 31:24 pattern 4 length
-	 * bit 23:16 pattern 5 length
-	 * bit 15:8 pattern 6 length
-	 * bit 7:0 pattern 7 length
-	 *
-	 * the below logic writes out the new
-	 * pattern length for the corresponding
-	 * pattern_count, while masking out the
-	 * other fields
-	 */
-
-	ah->wow.wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+	if (pattern_count < MAX_NUM_PATTERN_LEGACY)
+		ah->wow.wow_event_mask |=
+			BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+	else
+		ah->wow.wow_event_mask2 |=
+			BIT((pattern_count - 8) + AR_WOW_PAT_FOUND_SHIFT);
 
 	if (pattern_count < 4) {
-		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN1_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH1_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
-	} else {
-		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+	} else if (pattern_count < 8) {
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN2_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH2_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+	} else if (pattern_count < 12) {
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN3_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH3_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH3, set, clr);
+	} else if (pattern_count < MAX_NUM_PATTERN) {
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN4_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH4_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH4, set, clr);
 	}
 
 	return 0;
drivers/net/wireless/ath/ath9k/hw.h +1 -0
index f51a28f..c8b3d8f 100644
@@ -273,6 +273,7 @@ enum ath9k_hw_caps {
 
 struct ath9k_hw_wow {
 	u32 wow_event_mask;
+	u32 wow_event_mask2;
 	u8 max_patterns;
 };
 
drivers/net/wireless/ath/ath9k/reg_wow.h +34 -0
index e6de4a3..83f27f9 100644
@@ -25,9 +25,39 @@
 #define AR_WOW_KEEP_ALIVE               0x827c
 #define AR_WOW_KEEP_ALIVE_DELAY         0x8288
 #define AR_WOW_PATTERN_MATCH            0x828c
+
+/*
+ * AR_WOW_LENGTH1
+ * bit 31:24 pattern 0 length
+ * bit 23:16 pattern 1 length
+ * bit 15:8 pattern 2 length
+ * bit 7:0 pattern 3 length
+ *
+ * AR_WOW_LENGTH2
+ * bit 31:24 pattern 4 length
+ * bit 23:16 pattern 5 length
+ * bit 15:8 pattern 6 length
+ * bit 7:0 pattern 7 length
+ *
+ * AR_WOW_LENGTH3
+ * bit 31:24 pattern 8 length
+ * bit 23:16 pattern 9 length
+ * bit 15:8 pattern 10 length
+ * bit 7:0 pattern 11 length
+ *
+ * AR_WOW_LENGTH4
+ * bit 31:24 pattern 12 length
+ * bit 23:16 pattern 13 length
+ * bit 15:8 pattern 14 length
+ * bit 7:0 pattern 15 length
+ */
 #define AR_WOW_LENGTH1                  0x8360
 #define AR_WOW_LENGTH2                  0X8364
+#define AR_WOW_LENGTH3                  0X8380
+#define AR_WOW_LENGTH4                  0X8384
+
 #define AR_WOW_PATTERN_MATCH_LT_256B    0x8368
+#define AR_MAC_PCU_WOW4                 0x8370
 
 #define AR_SW_WOW_CONTROL               0x20018
 #define AR_SW_WOW_ENABLE                0x1
@@ -89,5 +119,9 @@
 #define AR_WOW_LENGTH1_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
 #define AR_WOW_LEN2_SHIFT(_i)           ((0x7 - ((_i) & 0x7)) << 0x3)
 #define AR_WOW_LENGTH2_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
+#define AR_WOW_LEN3_SHIFT(_i)           ((0xb - ((_i) & 0xb)) << 0x3)
+#define AR_WOW_LENGTH3_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN3_SHIFT(_i))
+#define AR_WOW_LEN4_SHIFT(_i)           ((0xf - ((_i) & 0xf)) << 0x3)
+#define AR_WOW_LENGTH4_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN4_SHIFT(_i))
 
 #endif /* REG_WOW_H */
Signature · 1 line
2.2.2
#2 lore raw

PATCH 2/6 ath9k: Register correct WOW details with mac80211

In reply to Sujith Manoharan

From: Sujith Manoharan <[email protected]>

Since the number of user patterns is higher for
newer chips, make sure that this is registered
during initialization.

---
 drivers/net/wireless/ath/ath9k/wow.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/wow.c +14 -2
index 5092939..8d0b173 100644
@@ -16,13 +16,20 @@
 
 #include "ath9k.h"
 
-static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+static const struct wiphy_wowlan_support ath9k_wowlan_support_legacy = {
 	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
 	.n_patterns = MAX_NUM_USER_PATTERN,
 	.pattern_min_len = 1,
 	.pattern_max_len = MAX_PATTERN_SIZE,
 };
 
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = MAX_NUM_PATTERN - 2,
+	.pattern_min_len = 1,
+	.pattern_max_len = MAX_PATTERN_SIZE,
+};
+
 static u8 ath9k_wow_map_triggers(struct ath_softc *sc,
 				 struct cfg80211_wowlan *wowlan)
 {
@@ -320,9 +327,14 @@ void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
 void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
 
 	if ((sc->driver_data & ATH9K_PCI_WOW) || sc->force_wow) {
-		hw->wiphy->wowlan = &ath9k_wowlan_support;
+		if (AR_SREV_9462_20_OR_LATER(ah) || AR_SREV_9565_11_OR_LATER(ah))
+			hw->wiphy->wowlan = &ath9k_wowlan_support;
+		else
+			hw->wiphy->wowlan = &ath9k_wowlan_support_legacy;
+
 		device_init_wakeup(sc->dev, 1);
 	}
 }
Signature · 1 line
2.2.2
#3 lore raw

PATCH 3/6 ath9k: Fix issues with WoW enable

In reply to Sujith Manoharan

From: Sujith Manoharan <[email protected]>

This patch addresses several issues with the
ath9k_hw_wow_enable() routine:

* The usage of set/clr variables is removed. Writing the required values to registers is cleaner.

* The shift value of 28 for the contention window field in AR_WOW_PATTERN is incorrect, change it to 27.

* Disabling Keep Alive needs to be done based on the LINK_CHANGE option. This is done unconditionally now, fix this.

* The workaround for the D1/D3 issue is required only for AR9462.

* The bitfield for enabling pattern matching for packets less than 256 bytes has expanded for new chips, handle this accordingly.

* General cleanup.

---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 181 ++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/hw.h         |   2 +-
 drivers/net/wireless/ath/ath9k/reg_wow.h    |   5 +-
 3 files changed, 93 insertions(+), 95 deletions(-)
drivers/net/wireless/ath/ath9k/ar9003_wow.c +89 -92
index 4b53d0b..6ffa0e0 100644
@@ -222,14 +222,9 @@ EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 {
 	u32 wow_event_mask;
+	u32 keep_alive, magic_pattern, host_pm_ctrl;
 	u32 set, clr;
 
-	/*
-	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
-	 * indicate which WoW events we have enabled. The WoW events
-	 * are from the 'pattern_enable' in this function and
-	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
-	 */
 	wow_event_mask = ah->wow.wow_event_mask;
 
 	/*
@@ -249,152 +244,154 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	}
 
 	/*
-	 * set the power states appropriately and enable PME
+	 * AR_PMCTRL_HOST_PME_EN - Override PME enable in configuration
+	 *                         space and allow MAC to generate WoW anyway.
+	 *
+	 * AR_PMCTRL_PWR_PM_CTRL_ENA - ???
+	 *
+	 * AR_PMCTRL_AUX_PWR_DET - PCI core SYS_AUX_PWR_DET signal,
+	 *                         needs to be set for WoW in PCI mode.
+	 *
+	 * AR_PMCTRL_WOW_PME_CLR - WoW Clear Signal going to the MAC.
+	 *
+	 * Set the power states appropriately and enable PME.
+	 *
+	 * Set and clear WOW_PME_CLEAR for the chip
+	 * to generate next wow signal.
 	 */
-	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
-	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_HOST_PME_EN |
+		    			 AR_PMCTRL_PWR_PM_CTRL_ENA |
+		    			 AR_PMCTRL_AUX_PWR_DET |
+		    			 AR_PMCTRL_WOW_PME_CLR);
+	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR);
 
 	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip
-	 * to generate next wow signal.
+	 * Random Backoff.
+	 *
+	 * 31:28 in AR_WOW_PATTERN : Indicates the number of bits used in the
+	 *                           contention window. For value N,
+	 *                           the random backoff will be selected between
+	 *                           0 and (2 ^ N) - 1.
 	 */
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-	clr = AR_PMCTRL_WOW_PME_CLR;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+	REG_SET_BIT(ah, AR_WOW_PATTERN,
+		    AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF));
 
 	/*
-	 * Setup for:
-	 *	- beacon misses
-	 *	- magic pattern
-	 *	- keep alive timeout
-	 *	- pattern matching
+	 * AIFS time, Slot time, Keep Alive count.
 	 */
-
+	REG_SET_BIT(ah, AR_WOW_COUNT, AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+		    		      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+		    		      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT));
 	/*
-	 * Program default values for pattern backoff, aifs/slot/KAL count,
-	 * beacon miss timeout, KAL timeout, etc.
+	 * Beacon timeout.
 	 */
-	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
-	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
-
-	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
-	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
-	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
-	REG_SET_BIT(ah, AR_WOW_COUNT, set);
-
 	if (pattern_enable & AH_WOW_BEACON_MISS)
-		set = AR_WOW_BEACON_TIMO;
-	/* We are not using beacon miss, program a large value */
+		REG_WRITE(ah, AR_WOW_BCN_TIMO, AR_WOW_BEACON_TIMO);
 	else
-		set = AR_WOW_BEACON_TIMO_MAX;
-
-	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+		REG_WRITE(ah, AR_WOW_BCN_TIMO, AR_WOW_BEACON_TIMO_MAX);
 
 	/*
-	 * Keep alive timo in ms except AR9280
+	 * Keep alive timeout in ms.
 	 */
 	if (!pattern_enable)
-		set = AR_WOW_KEEP_ALIVE_NEVER;
+		REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, AR_WOW_KEEP_ALIVE_NEVER);
 	else
-		set = KAL_TIMEOUT * 32;
-
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+		REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, KAL_TIMEOUT * 32);
 
 	/*
-	 * Keep alive delay in us. based on 'power on clock',
-	 * therefore in usec
+	 * Keep alive delay in us.
 	 */
-	set = KAL_DELAY * 1000;
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, KAL_DELAY * 1000);
 
 	/*
-	 * Create keep alive pattern to respond to beacons
+	 * Create keep alive pattern to respond to beacons.
 	 */
 	ath9k_wow_create_keep_alive_pattern(ah);
 
 	/*
-	 * Configure MAC WoW Registers
+	 * Configure keep alive register.
 	 */
-	set = 0;
+	keep_alive = REG_READ(ah, AR_WOW_KEEP_ALIVE);
+
 	/* Send keep alive timeouts anyway */
-	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+	keep_alive &= ~AR_WOW_KEEP_ALIVE_AUTO_DIS;
 
-	if (pattern_enable & AH_WOW_LINK_CHANGE)
+	if (pattern_enable & AH_WOW_LINK_CHANGE) {
+		keep_alive &= ~AR_WOW_KEEP_ALIVE_FAIL_DIS;
 		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
-	else
-		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	} else {
+		keep_alive |= AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	}
 
-	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE, keep_alive);
 
 	/*
-	 * we are relying on a bmiss failure. ensure we have
-	 * enough threshold to prevent false positives
+	 * We are relying on a bmiss failure, ensure we have
+	 * enough threshold to prevent false positives.
 	 */
 	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
 		      AR_WOW_BMISSTHRESHOLD);
 
-	set = 0;
-	clr = 0;
-
 	if (pattern_enable & AH_WOW_BEACON_MISS) {
-		set = AR_WOW_BEACON_FAIL_EN;
 		wow_event_mask |= AR_WOW_BEACON_FAIL;
+		REG_SET_BIT(ah, AR_WOW_BCN_EN, AR_WOW_BEACON_FAIL_EN);
 	} else {
-		clr = AR_WOW_BEACON_FAIL_EN;
+		REG_CLR_BIT(ah, AR_WOW_BCN_EN, AR_WOW_BEACON_FAIL_EN);
 	}
 
-	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
-
-	set = 0;
-	clr = 0;
 	/*
-	 * Enable the magic packet registers
+	 * Enable the magic packet registers.
 	 */
+	magic_pattern = REG_READ(ah, AR_WOW_PATTERN);
+	magic_pattern |= AR_WOW_MAC_INTR_EN;
+
 	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
-		set = AR_WOW_MAGIC_EN;
+		magic_pattern |= AR_WOW_MAGIC_EN;
 		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
 	} else {
-		clr = AR_WOW_MAGIC_EN;
+		magic_pattern &= ~AR_WOW_MAGIC_EN;
 	}
-	set |= AR_WOW_MAC_INTR_EN;
-	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
 
+	REG_WRITE(ah, AR_WOW_PATTERN, magic_pattern);
+
+	/*
+	 * Enable pattern matching for packets which are less
+	 * than 256 bytes.
+	 */
 	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
 		  AR_WOW_PATTERN_SUPPORTED);
 
 	/*
-	 * Set the power states appropriately and enable PME
+	 * Set the power states appropriately and enable PME.
 	 */
-	clr = 0;
-	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
-	      AR_PMCTRL_PWR_PM_CTRL_ENA;
+	host_pm_ctrl = REG_READ(ah, AR_PCIE_PM_CTRL);
+	host_pm_ctrl |= AR_PMCTRL_PWR_STATE_D1D3 |
+			AR_PMCTRL_HOST_PME_EN |
+			AR_PMCTRL_PWR_PM_CTRL_ENA;
+	host_pm_ctrl &= ~AR_PCIE_PM_CTRL_ENA;
 
-	clr = AR_PCIE_PM_CTRL_ENA;
-	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+	if (AR_SREV_9462(ah)) {
+		/*
+		 * This is needed to prevent the chip waking up
+		 * the host within 3-4 seconds with certain
+		 * platform/BIOS.
+		 */
+		host_pm_ctrl &= ~AR_PMCTRL_PWR_STATE_D1D3;
+		host_pm_ctrl |= AR_PMCTRL_PWR_STATE_D1D3_REAL;
+	}
+
+	REG_WRITE(ah, AR_PCIE_PM_CTRL, host_pm_ctrl);
 
 	/*
-	 * this is needed to prevent the chip waking up
-	 * the host within 3-4 seconds with certain
-	 * platform/BIOS. The fix is to enable
-	 * D1 & D3 to match original definition and
-	 * also match the OTP value. Anyway this
-	 * is more related to SW WOW.
+	 * Enable sequence number generation when asleep.
 	 */
-	clr = AR_PMCTRL_PWR_STATE_D1D3;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
-	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-
 	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
 
-	/* to bring down WOW power low margin */
-	set = BIT(13);
-	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+	/* To bring down WOW power low margin */
+	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, BIT(13));
+
 	/* HW WoW */
-	clr = BIT(5);
-	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, BIT(5));
 
 	ath9k_hw_set_powermode_wow_sleep(ah);
 	ah->wow.wow_event_mask = wow_event_mask;
drivers/net/wireless/ath/ath9k/hw.h +1 -1
index c8b3d8f..e82e570 100644
@@ -199,7 +199,7 @@
 #define KAL_NUM_DESC_WORDS	12
 #define KAL_ANTENNA_MODE	1
 #define KAL_TO_DS		1
-#define KAL_DELAY		4	/*delay of 4ms between 2 KAL frames */
+#define KAL_DELAY		4	/* delay of 4ms between 2 KAL frames */
 #define KAL_TIMEOUT		900
 
 #define MAX_PATTERN_SIZE		256
drivers/net/wireless/ath/ath9k/reg_wow.h +3 -2
index 83f27f9..3abfca5 100644
@@ -68,7 +68,7 @@
 #define AR_CLR_MAC_INTERRUPT            0x20
 #define AR_CLR_KA_INTERRUPT             0x40
 
-#define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 28) /* in usecs */
+#define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 27) /* in usecs */
 #define AR_WOW_MAC_INTR_EN              0x00040000
 #define AR_WOW_MAGIC_EN                 0x00010000
 #define AR_WOW_PATTERN_EN(x)            (x & 0xff)
@@ -113,7 +113,8 @@
 #define AR_WOW_KA_DESC_WORD2            0xe000
 #define AR_WOW_TB_PATTERN(i)            (0xe100 + (i << 8))
 #define AR_WOW_TB_MASK(i)               (0xec00 + (i << 5))
-#define AR_WOW_PATTERN_SUPPORTED        0xff
+#define AR_WOW_PATTERN_SUPPORTED_LEGACY 0xff
+#define AR_WOW_PATTERN_SUPPORTED        0xffff
 #define AR_WOW_LENGTH_MAX               0xff
 #define AR_WOW_LEN1_SHIFT(_i)           ((0x3 - ((_i) & 0x3)) << 0x3)
 #define AR_WOW_LENGTH1_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
Signature · 1 line
2.2.2
#4 lore raw

PATCH 4/6 ath9k: Program AR_WA correctly

In reply to Sujith Manoharan

From: Sujith Manoharan <[email protected]>

Setting the required configuration in the PCIE WorkAround register needs to be done after all the WoW parameters have been set.

---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 39 ++++++++++++++++-------------
 1 file changed, 22 insertions(+), 17 deletions(-)
drivers/net/wireless/ath/ath9k/ar9003_wow.c +22 -17
index 6ffa0e0..cf45b91 100644
@@ -219,31 +219,34 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
 
+static void ath9k_hw_wow_set_arwr_reg(struct ath_hw *ah)
+{
+	u32 wa_reg;
+
+	if (!ah->is_pciexpress)
+		return;
+
+	/*
+	 * We need to untie the internal POR (power-on-reset)
+	 * to the external PCI-E reset. We also need to tie
+	 * the PCI-E Phy reset to the PCI-E reset.
+	 */
+	wa_reg = REG_READ(ah, AR_WA);
+	wa_reg &= ~AR_WA_UNTIE_RESET_EN;
+	wa_reg |= AR_WA_RESET_EN;
+	wa_reg |= AR_WA_POR_SHORT;
+
+	REG_WRITE(ah, AR_WA, wa_reg);
+}
+
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 {
 	u32 wow_event_mask;
 	u32 keep_alive, magic_pattern, host_pm_ctrl;
-	u32 set, clr;
 
 	wow_event_mask = ah->wow.wow_event_mask;
 
 	/*
-	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
-	 * WOW sleep, we do want the Reset from the PCI-E to disturb
-	 * our hw state
-	 */
-	if (ah->is_pciexpress) {
-		/*
-		 * we need to untie the internal POR (power-on-reset)
-		 * to the external PCI-E reset. We also need to tie
-		 * the PCI-E Phy reset to the PCI-E reset.
-		 */
-		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
-		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
-		REG_RMW(ah, AR_WA, set, clr);
-	}
-
-	/*
 	 * AR_PMCTRL_HOST_PME_EN - Override PME enable in configuration
 	 *                         space and allow MAC to generate WoW anyway.
 	 *
@@ -390,6 +393,8 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	/* To bring down WOW power low margin */
 	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, BIT(13));
 
+	ath9k_hw_wow_set_arwr_reg(ah);
+
 	/* HW WoW */
 	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, BIT(5));
 
Signature · 1 line
2.2.2
#5 lore raw

PATCH 5/6 ath9k: Clear TSF2 properly

In reply to Sujith Manoharan

From: Sujith Manoharan <[email protected]>

Chips in the AR9003 family have a second TSF, which needs to be cleared when putting the card to sleep.

---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 9 +++++++++
 drivers/net/wireless/ath/ath9k/reg.h        | 2 ++
 2 files changed, 11 insertions(+)
drivers/net/wireless/ath/ath9k/ar9003_wow.c +9 -0
index cf45b91..2dc50a0 100644
@@ -35,6 +35,15 @@ static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
 		return;
 	}
 
+	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
+		if (!REG_READ(ah, AR_MAC_PCU_GEN_TIMER_TSF_SEL))
+			REG_CLR_BIT(ah, AR_DIRECT_CONNECT, AR_DC_TSF2_ENABLE);
+	} else if (AR_SREV_9485(ah)){
+		if (!(REG_READ(ah, AR_NDP2_TIMER_MODE) &
+		      AR_GEN_TIMERS2_MODE_ENABLE_MASK))
+			REG_CLR_BIT(ah, AR_DIRECT_CONNECT, AR_DC_TSF2_ENABLE);
+	}
+
 	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
 }
 
drivers/net/wireless/ath/ath9k/reg.h +2 -0
index b1b803d..9587ec6 100644
@@ -1883,6 +1883,7 @@ enum {
 #define AR_FIRST_NDP_TIMER                  7
 #define AR_NDP2_PERIOD                      0x81a0
 #define AR_NDP2_TIMER_MODE                  0x81c0
+#define AR_GEN_TIMERS2_MODE_ENABLE_MASK     0x000000FF
 
 #define AR_GEN_TIMERS(_i)                   (0x8200 + ((_i) << 2))
 #define AR_NEXT_TBTT_TIMER                  AR_GEN_TIMERS(0)
@@ -1978,6 +1979,7 @@ enum {
 
 #define AR_DIRECT_CONNECT                              0x83a0
 #define AR_DC_AP_STA_EN                                0x00000001
+#define AR_DC_TSF2_ENABLE                              0x00000001
 
 #define AR_AES_MUTE_MASK0       0x805c
 #define AR_AES_MUTE_MASK0_FC    0x0000FFFF
Signature · 1 line
2.2.2
#6 lore raw

PATCH 6/6 ath9k: Choose correct rate for 2GHz channel

In reply to Sujith Manoharan

From: Sujith Manoharan <[email protected]>

Set the transmit rate for the keep-alive frames
as 1M/CCK when the current channel is in the
2GHz band.

---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath9k/ar9003_wow.c +5 -1
index 2dc50a0..86bfc96 100644
@@ -62,11 +62,15 @@ static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
 	/* set the transmit buffer */
 	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
 	ctl[1] = 0;
-	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
 	ctl[4] = 0;
 	ctl[7] = (ah->txchainmask) << 2;
 	ctl[2] = 0xf << 16; /* tx_tries 0 */
 
+	if (IS_CHAN_2GHZ(ah->curchan))
+		ctl[3] = 0x1b;	/* CCK_1M */
+	else
+		ctl[3] = 0xb;	/* OFDM_6M */
+
 	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
 		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
 
Signature · 1 line
2.2.2
#7 lore raw
In reply to Sujith Manoharan
Quoted 11 lines · Sujith Manoharan

From: Sujith Manoharan <[email protected]>

ath9k patches for -next.

Sujith Manoharan (6):
ath9k: Add support for more WOW patterns
ath9k: Register correct WOW details with mac80211
ath9k: Fix issues with WoW enable
ath9k: Program AR_WA correctly
ath9k: Clear TSF2 properly
ath9k: Choose correct rate for 2GHz channel

Thanks, all six patches applied.

Signature · 1 line
Kalle Valo