Skip to contentSkip to conversation

libcgroup: new package

PATCH New Clayton Shotwell 2 participants 2 messages Oct 2, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 libcgroup: new package

---
Changes v4 -> v5:
- Cleaned up extra spaces (suggested by Peter)
- Corrected the dl path (suggested by Peter)
- Added dependencies on BR2_TOOLCHAIN_USES_GLIBC and BR2_INSTALL_LIBSTDCPP rather than reworking the
package (suggested by Peter)
Changes v3 -> v4:
- Changed the length of the config comment (suggested by Thomas)
- Removed unneeded configure options (suggested by Thomas)
Changes v2 -> v3:
- No changes.
Changes v1 -> v2:
- General cleanup to the mk file to conform to the standard format.
- Corrected the license version and license file to be correct.
- Cleaned up the configure options to enable options for static libraries and linux-pam if they are selected in the configuration.

 package/Config.in              |    1 +
 package/libcgroup/Config.in    |   13 +++++++++++++
 package/libcgroup/libcgroup.mk |   34 ++++++++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 0 deletions(-)
 create mode 100644 package/libcgroup/Config.in
 create mode 100644 package/libcgroup/libcgroup.mk
package/Config.in +1 -0
index d410c34..9874c43 100644
@@ -662,6 +662,7 @@ source "package/libatomic_ops/Config.in"
 source "package/libbsd/Config.in"
 source "package/libcap/Config.in"
 source "package/libcap-ng/Config.in"
+source "package/libcgroup/Config.in"
 source "package/libdaemon/Config.in"
 source "package/libelf/Config.in"
 source "package/libevent/Config.in"
package/libcgroup/Config.in new file +13 -0
new file mode 100644
index 0000000..0f5c097
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_LIBCGROUP
+	bool "libcgroup"
+	depends on BR2_INSTALL_LIBSTDCPP
+	# libcgroup uses <fts.h> which is not included by default in uClibc
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	help
+	  libcgroup is a library that abstracts the control
+	  group file system in Linux.
+
+	  http://libcg.sourceforge.net/
+
+comment "libcgroup requires a glibc toolchain with C++ support"
+	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_USES_GLIBC
package/libcgroup/libcgroup.mk new file +34 -0
new file mode 100644
index 0000000..c2392e0
@@ -0,0 +1,34 @@
+################################################################################
+#
+# libcgroup
+#
+################################################################################
+
+LIBCGROUP_VERSION = 0.38
+LIBCGROUP_SOURCE = libcgroup-$(LIBCGROUP_VERSION).tar.bz2
+LIBCGROUP_SITE = http://downloads.sourceforge.net/project/libcg/libcgroup/v.038
+LIBCGROUP_LICENSE = LGPLv2.1
+LIBCGROUP_LICENSE_FILES = COPYING
+
+LIBCGROUP_INSTALL_STAGING = YES
+
+# Undefining _FILE_OFFSET_BITS here because of a "bug" with glibc fts.h
+# large file support. See https://bugzilla.redhat.com/show_bug.cgi?id=574992
+# for more information.
+LIBCGROUP_CONF_ENV = \
+	CXXFLAGS+="-U_FILE_OFFSET_BITS" \
+	CFLAGS+="-U_FILE_OFFSET_BITS"
+
+LIBCGROUP_CONF_OPT = \
+	--disable-tools \
+	--disable-daemon \
+	--disable-initscript-install
+
+ifeq ($(BR2_PACKAGE_LINUX_PAM),y)
+	LIBCGROUP_DEPENDENCIES += linux-pam
+	LIBCGROUP_CONF_OPT += --enable-pam
+else
+	LIBCGROUP_CONF_OPT += --disable-pam
+endif
+
+$(eval $(autotools-package))
Signature · 1 line
1.7.1
#1 lore raw

PATCH v5 1/1 libcgroup: new package

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Clayton" == Clayton Shotwell <[email protected]> writes:

Clayton> Signed-off-by: Clayton Shotwell <[email protected]> Clayton> ---
Clayton> Changes v4 -> v5:

 Clayton>   - Cleaned up extra spaces (suggested by Peter)
 Clayton>   - Corrected the dl path (suggested by Peter)
 Clayton>   - Added dependencies on BR2_TOOLCHAIN_USES_GLIBC and
 Clayton>     BR2_INSTALL_LIBSTDCPP rather than reworking the 
 Clayton>     package (suggested by Peter)
 Clayton> Changes v3 -> v4:
 Clayton>   - Changed the length of the config comment (suggested by Thomas)
 Clayton>   - Removed unneeded configure options (suggested by Thomas)
 Clayton> Changes v2 -> v3:
 Clayton>   - No changes.
 Clayton> Changes v1 -> v2:
 Clayton>   - General cleanup to the mk file to conform to the standard format.
 Clayton>   - Corrected the license version and license file to be correct.
 Clayton>   - Cleaned up the configure options to enable options for static

Clayton> libraries and linux-pam if they are selected in the configuration.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard