omniorb: new package
PATCH v5 1/1 omniorb: new package
---
Changes v4 -> v5
* Fixed depend bug, didn't retest Kconfig before submitting v4 package/omniorb/Config.in
Changes v3 -> v4
* Added depedency on BR2_INSTALL_LIBSTCPP and comment about
support when it's missing. package/omniorb/Config.in (suggested by Peter)
* Removed trailing white space package/omniorb/Config.in (suggested by Peter)
* Cleaned up omni patch name and added description with upstream link package/omniorb/omniorb-0001-supportCrossCompileToolExport.patch (suggested by Peter)
* Changed places where OMNIORB was uppercase to omniORB. ORB is an
acronym, omni is not. package/omniorb/omniorb.mk (suggested by Peter)
* Removed empty line after autotools-package package/omniorb/omniorb.mk (suggested by Peter)
Changes v2 -> v3
* Removed depend on python as the mk accounts for it package/omniorb/Config.in (suggested by Thomas)
* Added link to website package/omniorb/Config.in (suggested by Thomas)
* Added note about host python requirement for build package/omniorb/omniorb.mk (suggested by Thomas)
* Removed staging loop of fixing file paths for a single file. Instead it no just operates on a single file package/omniorb/omniorb.mk (suggested by Thomas)
* Fixed brackets package/omniorb/omniorb.mk (suggested by Thomas)
* Cleaned up host tool comment package/omniorb/omniorb.mk (suggested by Thomas)
* Cleaned up host tools to use HOST_CONFIGURE_OPTS to fix ccache support package/omniorb/omniorb.mk (suggested by Thomas)
* Switched over to use a make tools export and clean hook. Required patching of the package to correctly assign the CC/CXX/etc defines. Submitted this patch upsteam as well as including in this patchset. package/omniorb/omniorb.mk (suggested by Arnout)
Changes v1 -> v2:
* Fixed formatting of help and added select of python in package/omniorb/Config.in (suggested by Thomas)
* Removed extra open ended config option as it isn't used package/omniorb/Config.in (suggested by Thomas)
* Cleaned up use of brackets and replaced with braces package/omniorb/Config.in (suggested by Thomas)
* Updated licenses to be GPL and LGPL with a + package/omniorb/omniorb.mk (suggested by Thomas)
* Removed redundant conf opt and target install sets package/omniorb/omniorb.mk (suggested by Thomas)
* Added a post install step to replace overloading the default staging installs package/omniorb/omniorb.mk (suggested by Thomas)
* Broke out tools(host) build into seperate post conf step package/omniorb/omniorb.mk (suggested by Thomas)
* Removed clean and uninstall package/omniorb/omniorb.mk (suggested by Thomas)
package/Config.in | 1 + package/omniorb/Config.in | 14 ++++++ .../omniorb-0001-crosscompile-tool-export.patch | 30 +++++++++++++ package/omniorb/omniorb.mk | 46 ++++++++++++++++++++ 4 files changed, 91 insertions(+), 0 deletions(-) create mode 100644 package/omniorb/Config.in create mode 100644 package/omniorb/omniorb-0001-crosscompile-tool-export.patch create mode 100644 package/omniorb/omniorb.mk
package/Config.in +1 -0
@@ -625,6 +625,7 @@ source "package/libupnp/Config.in" source "package/libvncserver/Config.in" source "package/libwebsockets/Config.in" source "package/nss-mdns/Config.in" +source "package/omniorb/Config.in" source "package/openpgm/Config.in" source "package/ortp/Config.in" source "package/slirp/Config.in"
package/omniorb/Config.in new file +14 -0
@@ -0,0 +1,14 @@ +config BR2_PACKAGE_OMNIORB + bool "omniorb" + depends on BR2_INSTALL_LIBSTCPP + help + omniORB is a robust high performance CORBA ORB for C++ and Python. + omniORB is largely CORBA 2.6 compliant. omniORB is one of only + three ORBs to have been awarded the Open Group's Open Brand for + CORBA. This means that omniORB has been tested and certified + CORBA compliant, to version 2.1 of the CORBA specification. + + http://omniorb.sourceforge.net/ + +comment "omniORB requires a toolchain with C++ support" + depends on !BR2_INSTALL_LIBSTCPP
package/omniorb/omniorb-0001-crosscompile-tool-export.patch new file +30 -0
@@ -0,0 +1,30 @@ +beforeauto.mk.in: added support for overriding the configure time +defined CC/CXX/RANLIB/CPP variables so that a couple pkg tools could be +built which generate code during the cross compile build. + +http://www.omniorb-support.com/pipermail/omniorb-list/2013-September/031473.html + +Signed-off-by: Matt Weber <[email protected]> + +--- omniorb-4.1.6.orig/mk/beforeauto.mk.in 2013-09-12 12:49:55.668708148 -0500 ++++ omniorb-4.1.6/mk/beforeauto.mk.in 2013-09-12 12:51:22.707928579 -0500 +@@ -672,15 +672,15 @@ + # + + AR = ar cq +-CC = @CC@ +-CXX = @CXX@ +-RANLIB = @RANLIB@ ++CC ?= @CC@ ++CXX ?= @CXX@ ++RANLIB ?= @RANLIB@ + MKDIRHIER = $(BASE_OMNI_TREE)/bin/scripts/omkdirhier + INSTLIBFLAGS = -m 0644 + INSTEXEFLAGS = -m 0755 + CP = cp + MV = mv -f +-CPP = @CPP@ ++CPP ?= @CPP@ + OMKDEPEND = $(TOOLBINDIR)/omkdepend + RMDIRHIER = $(RM) -rf +
package/omniorb/omniorb.mk new file +46 -0
46 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v5 1/1 omniorb: new package
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Matt" == Matt Weber <[email protected]> writes:
Matt> Signed-off-by: Matt Weber <[email protected]> Matt> ---
Matt> Changes v4 -> v5
Matt> * Fixed depend bug, didn't retest Kconfig before submitting v4
Matt> package/omniorb/Config.in
I'm afraid you still didn't test enough, as there's a small error:
Matt> +++ b/package/omniorb/Config.in
Matt> @@ -0,0 +1,14 @@
Matt> +config BR2_PACKAGE_OMNIORB
Matt> + bool "omniorb"
Matt> + depends on BR2_INSTALL_LIBSTCPP
Matt> + help
Matt> + omniORB is a robust high performance CORBA ORB for C++ and Python. Matt> + omniORB is largely CORBA 2.6 compliant. omniORB is one of only Matt> + three ORBs to have been awarded the Open Group's Open Brand for Matt> + CORBA. This means that omniORB has been tested and certified Matt> + CORBA compliant, to version 2.1 of the CORBA specification.
Matt> +
Matt> + http://omniorb.sourceforge.net/
Matt> +
Matt> +comment "omniORB requires a toolchain with C++ support"
Matt> + depends on !BR2_INSTALL_LIBSTCPP
The C++ symbol is BR2_INSTALL_LIBSTDCPP, both places.
Matt> +# omniORB is currently not cross-compile friendly and has some assumptions Matt> +# where a couple host tools are built in place and then used during the Matt> +# build. The tools generate code from the IDL description language, which Matt> +# is then built into the cross compiled OMNIORB application. Matt> +# So this first hook builds the tools required for the host side Matt> +# generation of code. Then the second hook cleans up before the install.
You still have some trailing spaces here.
Matt> +define OMNIORB_BUILD_TOOLS
Matt> + $(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
Matt> + -C $(@D)/src/tool export
Matt> +endef
Matt> +OMNIORB_POST_CONFIGURE_HOOKS += OMNIORB_BUILD_TOOLS Matt> +
Matt> +define OMNIORB_CLEAN_TOOLS
Matt> + $(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
Matt> + -C $(@D)/src/tool clean
Matt> +endef
Matt> +OMNIORB_POST_BUILD_HOOKS += OMNIORB_CLEAN_TOOLS Matt> +
Matt> +define OMNIORB_FIXUP_FILE_PATHS_HOOK
Matt> + $(SED) "s:$(HOST_DIR)/usr:/usr:g" $(STAGING_DIR)/usr/bin/omniidl;
The final ';' isn't needed.
Committed with these minor fixes, thanks.
Signature · 1 line
Bye, Peter Korsgaard