Skip to contentSkip to conversation

add static huge zero folio support

RFC In review Pankaj Raghav (Samsung) 5 participants 16 messages Jul 24, 2025 – Aug 4, 2025

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover add static huge zero folio support

From: Pankaj Raghav <[email protected]>

NOTE: I am resending as an RFC again based on Lorenzo's feedback. The old series can be found here [1].

There are many places in the kernel where we need to zeroout larger chunks but the maximum segment we can zeroout at a time by ZERO_PAGE is limited by PAGE_SIZE.

This concern was raised during the review of adding Large Block Size support to XFS[2][3].

This is especially annoying in block devices and filesystems where we attach multiple ZERO_PAGEs to the bio in different bvecs. With multipage bvec support in block layer, it is much more efficient to send out larger zero pages as a part of a single bvec.

Some examples of places in the kernel where this could be useful:
- blkdev_issue_zero_pages()
- iomap_dio_zero()
- vmalloc.c:zero_iter()
- rxperf_process_call()
- fscrypt_zeroout_range_inline_crypt()
- bch2_checksum_update()
...

Usually huge_zero_folio is allocated on demand, and it will be deallocated by the shrinker if there are no users of it left. At the moment, huge_zero_folio infrastructure refcount is tied to the process lifetime that created it. This might not work for bio layer as the completions can be async and the process that created the huge_zero_folio might no longer be alive. And, one of the main point that came during discussion is to have something bigger than zero page as a drop-in replacement.

Add a config option STATIC_HUGE_ZERO_FOLIO that will always allocate the huge_zero_folio, and it will never drop the reference. This makes using the huge_zero_folio without having to pass any mm struct and does not tie the lifetime of the zero folio to anything, making it a drop-in replacement for ZERO_PAGE.

I have converted blkdev_issue_zero_pages() as an example as a part of this series. I also noticed close to 4% performance improvement just by replacing ZERO_PAGE with static huge_zero_folio.

I will send patches to individual subsystems using the huge_zero_folio once this gets upstreamed.

Looking forward to some feedback.

[1] https://lore.kernel.org/linux-mm/[email protected]/
[2] https://lore.kernel.org/linux-xfs/[email protected]/
[3] https://lore.kernel.org/linux-xfs/[email protected]/

Changes since v1:
- Fixed all warnings.
- Added a retry feature after a particular time.
- Added Acked-by and Signed-off-by from David.

Changes since last series[1]:
- Instead of allocating a new page through memblock, use the same infrastructure as huge_zero_folio but raise the reference and never drop it. (David)
- And some minor cleanups based on Lorenzo's feedback.

Pankaj Raghav (4):
mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker
mm: add static huge zero folio
mm: add largest_zero_folio() routine
block: use largest_zero_folio in __blkdev_issue_zero_pages()

 arch/x86/Kconfig        |  1 +
 block/blk-lib.c         | 15 +++++-----
 include/linux/huge_mm.h | 35 ++++++++++++++++++++++
 mm/Kconfig              | 21 +++++++++++++
 mm/huge_memory.c        | 66 +++++++++++++++++++++++++++++++++--------
 5 files changed, 119 insertions(+), 19 deletions(-)

base-commit: 4c831e7a4b72b7ac16b84e4317dee635b170a663

Signature · 1 line
2.49.0
#1 lore raw

RFC v2 1/4 mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

No functional changes.

---
 mm/huge_memory.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
mm/huge_memory.c +12 -12
index 2b4ea5a2ce7d..5d8365d1d3e9 100644
@@ -266,15 +266,15 @@ void mm_put_huge_zero_folio(struct mm_struct *mm)
 		put_huge_zero_page();
 }
 
-static unsigned long shrink_huge_zero_page_count(struct shrinker *shrink,
-					struct shrink_control *sc)
+static unsigned long shrink_huge_zero_folio_count(struct shrinker *shrink,
+						  struct shrink_control *sc)
 {
 	/* we can free zero page only if last reference remains */
 	return atomic_read(&huge_zero_refcount) == 1 ? HPAGE_PMD_NR : 0;
 }
 
-static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
-				       struct shrink_control *sc)
+static unsigned long shrink_huge_zero_folio_scan(struct shrinker *shrink,
+						 struct shrink_control *sc)
 {
 	if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
 		struct folio *zero_folio = xchg(&huge_zero_folio, NULL);
@@ -287,7 +287,7 @@ static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
 	return 0;
 }
 
-static struct shrinker *huge_zero_page_shrinker;
+static struct shrinker *huge_zero_folio_shrinker;
 
 #ifdef CONFIG_SYSFS
 static ssize_t enabled_show(struct kobject *kobj,
@@ -849,8 +849,8 @@ static inline void hugepage_exit_sysfs(struct kobject *hugepage_kobj)
 
 static int __init thp_shrinker_init(void)
 {
-	huge_zero_page_shrinker = shrinker_alloc(0, "thp-zero");
-	if (!huge_zero_page_shrinker)
+	huge_zero_folio_shrinker = shrinker_alloc(0, "thp-zero");
+	if (!huge_zero_folio_shrinker)
 		return -ENOMEM;
 
 	deferred_split_shrinker = shrinker_alloc(SHRINKER_NUMA_AWARE |
@@ -858,13 +858,13 @@ static int __init thp_shrinker_init(void)
 						 SHRINKER_NONSLAB,
 						 "thp-deferred_split");
 	if (!deferred_split_shrinker) {
-		shrinker_free(huge_zero_page_shrinker);
+		shrinker_free(huge_zero_folio_shrinker);
 		return -ENOMEM;
 	}
 
-	huge_zero_page_shrinker->count_objects = shrink_huge_zero_page_count;
-	huge_zero_page_shrinker->scan_objects = shrink_huge_zero_page_scan;
-	shrinker_register(huge_zero_page_shrinker);
+	huge_zero_folio_shrinker->count_objects = shrink_huge_zero_folio_count;
+	huge_zero_folio_shrinker->scan_objects = shrink_huge_zero_folio_scan;
+	shrinker_register(huge_zero_folio_shrinker);
 
 	deferred_split_shrinker->count_objects = deferred_split_count;
 	deferred_split_shrinker->scan_objects = deferred_split_scan;
@@ -875,7 +875,7 @@ static int __init thp_shrinker_init(void)
 
 static void __init thp_shrinker_exit(void)
 {
-	shrinker_free(huge_zero_page_shrinker);
+	shrinker_free(huge_zero_folio_shrinker);
 	shrinker_free(deferred_split_shrinker);
 }
 
Signature · 1 line
2.49.0
reviewer
#2 lore raw

Re: [RFC v2 1/4] mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

Quoted 5 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

Quoted 9 lines

No functional changes.

---
 mm/huge_memory.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

LGTM. Reviewed-by: Zi Yan <[email protected]>

--
Best Regards,
Yan, Zi

#3 lore raw

Re: [RFC v2 1/4] mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

In reply to Pankaj Raghav (Samsung)
Quoted 5 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

Why not change get_huge_zero_page() to get_huge_zero_folio() too, for consistent naming?

Quoted 8 lines

No functional changes.

---
 mm/huge_memory.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

-ritesh

#4 lore raw

Re: [RFC v2 1/4] mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

Quoted 10 lines · Ritesh Harjani (IBM)
Quoted 5 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

Why not change get_huge_zero_page() to get_huge_zero_folio() too, for consistent naming?

Then we should also rename put_huge_zero_folio(). Renaming MMF_HUGE_ZERO_PAGE should probably be done separately.

Signature · 3 lines
Cheers,

David / dhildenb
#5 lore raw

Re: [RFC v2 1/4] mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

Quoted 9 lines · David Hildenbrand
Quoted 8 lines · Ritesh Harjani (IBM)
Quoted 5 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

Quoted 5 lines
Quoted 2 lines

Why not change get_huge_zero_page() to get_huge_zero_folio() too, for consistent naming?

Then we should also rename put_huge_zero_folio(). Renaming MMF_HUGE_ZERO_PAGE should probably be done separately.

Thanks Ritesh and David.

I will change them in the next version! :)

--
Pankaj

Reviewed-by on v2 1/4
#6 lore raw

Re: [RFC v2 1/4] mm: rename huge_zero_page_shrinker to huge_zero_folio_shrinker

In reply to Pankaj Raghav (Samsung)
Quoted 10 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

As we already moved from exposing huge_zero_page to huge_zero_folio, change the name of the shrinker to reflect that.

No functional changes.

Makes sense to rename other related stuff as pointed out by Ritesh and David, but for this part:

Quoted 78 lines
---
 mm/huge_memory.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
mm/huge_memory.c +12 -13
index 2b4ea5a2ce7d..5d8365d1d3e9 100644
@@ -266,15 +266,15 @@ void mm_put_huge_zero_folio(struct mm_struct *mm)
 		put_huge_zero_page();
 }
 
-static unsigned long shrink_huge_zero_page_count(struct shrinker *shrink,
-					struct shrink_control *sc)
+static unsigned long shrink_huge_zero_folio_count(struct shrinker *shrink,
+						  struct shrink_control *sc)
 {
 	/* we can free zero page only if last reference remains */
 	return atomic_read(&huge_zero_refcount) == 1 ? HPAGE_PMD_NR : 0;
 }
 
-static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
-				       struct shrink_control *sc)
+static unsigned long shrink_huge_zero_folio_scan(struct shrinker *shrink,
+						 struct shrink_control *sc)
 {
 	if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
 		struct folio *zero_folio = xchg(&huge_zero_folio, NULL);
@@ -287,7 +287,7 @@ static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
 	return 0;
 }
 
-static struct shrinker *huge_zero_page_shrinker;
+static struct shrinker *huge_zero_folio_shrinker;
 
 #ifdef CONFIG_SYSFS
 static ssize_t enabled_show(struct kobject *kobj,
@@ -849,8 +849,8 @@ static inline void hugepage_exit_sysfs(struct kobject *hugepage_kobj)
 
 static int __init thp_shrinker_init(void)
 {
-	huge_zero_page_shrinker = shrinker_alloc(0, "thp-zero");
-	if (!huge_zero_page_shrinker)
+	huge_zero_folio_shrinker = shrinker_alloc(0, "thp-zero");
+	if (!huge_zero_folio_shrinker)
 		return -ENOMEM;
 
 	deferred_split_shrinker = shrinker_alloc(SHRINKER_NUMA_AWARE |
@@ -858,13 +858,13 @@ static int __init thp_shrinker_init(void)
 						 SHRINKER_NONSLAB,
 						 "thp-deferred_split");
 	if (!deferred_split_shrinker) {
-		shrinker_free(huge_zero_page_shrinker);
+		shrinker_free(huge_zero_folio_shrinker);
 		return -ENOMEM;
 	}
 
-	huge_zero_page_shrinker->count_objects = shrink_huge_zero_page_count;
-	huge_zero_page_shrinker->scan_objects = shrink_huge_zero_page_scan;
-	shrinker_register(huge_zero_page_shrinker);
+	huge_zero_folio_shrinker->count_objects = shrink_huge_zero_folio_count;
+	huge_zero_folio_shrinker->scan_objects = shrink_huge_zero_folio_scan;
+	shrinker_register(huge_zero_folio_shrinker);
 
 	deferred_split_shrinker->count_objects = deferred_split_count;
 	deferred_split_shrinker->scan_objects = deferred_split_scan;
@@ -875,7 +875,7 @@ static int __init thp_shrinker_init(void)
 
 static void __init thp_shrinker_exit(void)
 {
-	shrinker_free(huge_zero_page_shrinker);
+	shrinker_free(huge_zero_folio_shrinker);
 	shrinker_free(deferred_split_shrinker);
 }
 
--

2.49.0

#7 lore raw

RFC v2 2/4 mm: add static huge zero folio

In reply to Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

There are many places in the kernel where we need to zeroout larger chunks but the maximum segment we can zeroout at a time by ZERO_PAGE is limited by PAGE_SIZE.

This is especially annoying in block devices and filesystems where we attach multiple ZERO_PAGEs to the bio in different bvecs. With multipage bvec support in block layer, it is much more efficient to send out larger zero pages as a part of single bvec.

This concern was raised during the review of adding LBS support to XFS[1][2].

Usually huge_zero_folio is allocated on demand, and it will be deallocated by the shrinker if there are no users of it left. At moment, huge_zero_folio infrastructure refcount is tied to the process lifetime that created it. This might not work for bio layer as the completions can be async and the process that created the huge_zero_folio might no longer be alive. And, one of the main point that came during discussion is to have something bigger than zero page as a drop-in replacement.

Add a config option STATIC_HUGE_ZERO_FOLIO that will always allocate the huge_zero_folio, and it will never drop the reference. This makes using the huge_zero_folio without having to pass any mm struct and does not tie the lifetime of the zero folio to anything, making it a drop-in replacement for ZERO_PAGE.

If STATIC_HUGE_ZERO_FOLIO config option is enabled, then mm_get_huge_zero_folio() will simply return this page instead of dynamically allocating a new PMD page.

This option can waste memory in small systems or systems with 64k base page size. So make it an opt-in and also add an option from individual architecture so that we don't enable this feature for larger base page size systems.

[1] https://lore.kernel.org/linux-xfs/[email protected]/
[2] https://lore.kernel.org/linux-xfs/[email protected]/

---
 arch/x86/Kconfig        |  1 +
 include/linux/huge_mm.h | 18 ++++++++++++++++++
 mm/Kconfig              | 21 +++++++++++++++++++++
 mm/huge_memory.c        | 42 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 82 insertions(+)
arch/x86/Kconfig +1 -0
index 0ce86e14ab5e..8e2aa1887309 100644
@@ -153,6 +153,7 @@ config X86
 	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP	if X86_64
 	select ARCH_WANT_HUGETLB_VMEMMAP_PREINIT if X86_64
 	select ARCH_WANTS_THP_SWAP		if X86_64
+	select ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO if X86_64
 	select ARCH_HAS_PARANOID_L1D_FLUSH
 	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	select BUILDTIME_TABLE_SORT
include/linux/huge_mm.h +18 -0
index 7748489fde1b..78ebceb61d0e 100644
@@ -476,6 +476,7 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf);
 
 extern struct folio *huge_zero_folio;
 extern unsigned long huge_zero_pfn;
+extern atomic_t huge_zero_folio_is_static;
 
 static inline bool is_huge_zero_folio(const struct folio *folio)
 {
@@ -494,6 +495,18 @@ static inline bool is_huge_zero_pmd(pmd_t pmd)
 
 struct folio *mm_get_huge_zero_folio(struct mm_struct *mm);
 void mm_put_huge_zero_folio(struct mm_struct *mm);
+struct folio *__get_static_huge_zero_folio(void);
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	if (!IS_ENABLED(CONFIG_STATIC_HUGE_ZERO_FOLIO))
+		return NULL;
+
+	if (likely(atomic_read(&huge_zero_folio_is_static)))
+		return huge_zero_folio;
+
+	return __get_static_huge_zero_folio();
+}
 
 static inline bool thp_migration_supported(void)
 {
@@ -685,6 +698,11 @@ static inline int change_huge_pud(struct mmu_gather *tlb,
 {
 	return 0;
 }
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	return NULL;
+}
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline int split_folio_to_list_to_order(struct folio *folio,
mm/Kconfig +21 -0
index 0287e8d94aea..e2132fcf2ccb 100644
@@ -835,6 +835,27 @@ config ARCH_WANT_GENERAL_HUGETLB
 config ARCH_WANTS_THP_SWAP
 	def_bool n
 
+config ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO
+	def_bool n
+
+config STATIC_HUGE_ZERO_FOLIO
+	bool "Allocate a PMD sized folio for zeroing"
+	depends on ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO && TRANSPARENT_HUGEPAGE
+	help
+	  Without this config enabled, the huge zero folio is allocated on
+	  demand and freed under memory pressure once no longer in use.
+	  To detect remaining users reliably, references to the huge zero folio
+	  must be tracked precisely, so it is commonly only available for mapping
+	  it into user page tables.
+
+	  With this config enabled, the huge zero folio can also be used
+	  for other purposes that do not implement precise reference counting:
+	  it is still allocated on demand, but never freed, allowing for more
+	  wide-spread use, for example, when performing I/O similar to the
+	  traditional shared zeropage.
+
+	  Not suitable for memory constrained systems.
+
 config MM_ID
 	def_bool n
 
mm/huge_memory.c +42 -0

54 lines not on this page · raw message

Signature · 1 line
2.49.0
#8 lore raw

Re: [RFC v2 2/4] mm: add static huge zero folio

Quoted 28 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

There are many places in the kernel where we need to zeroout larger chunks but the maximum segment we can zeroout at a time by ZERO_PAGE is limited by PAGE_SIZE.

This is especially annoying in block devices and filesystems where we attach multiple ZERO_PAGEs to the bio in different bvecs. With multipage bvec support in block layer, it is much more efficient to send out larger zero pages as a part of single bvec.

This concern was raised during the review of adding LBS support to XFS[1][2].

Usually huge_zero_folio is allocated on demand, and it will be deallocated by the shrinker if there are no users of it left. At moment, huge_zero_folio infrastructure refcount is tied to the process lifetime that created it. This might not work for bio layer as the completions can be async and the process that created the huge_zero_folio might no longer be alive. And, one of the main point that came during discussion is to have something bigger than zero page as a drop-in replacement.

Add a config option STATIC_HUGE_ZERO_FOLIO that will always allocate the huge_zero_folio, and it will never drop the reference. This makes using the huge_zero_folio without having to pass any mm struct and does not tie the lifetime of the zero folio to anything, making it a drop-in replacement for ZERO_PAGE.

Quoted 8 lines

If STATIC_HUGE_ZERO_FOLIO config option is enabled, then mm_get_huge_zero_folio() will simply return this page instead of dynamically allocating a new PMD page.

This option can waste memory in small systems or systems with 64k base page size. So make it an opt-in and also add an option from individual architecture so that we don't enable this feature for larger base page size systems.

Can you please help me understand why will there be memory waste with 64k base pagesize, if this feature gets enabled?

Is it because systems with 64k base pagsize can have a much larger PMD size then 2M and hence this static huge folio won't really get used?

Just want to understand this better. On Power with Radix MMU, PMD size is still 2M, but with Hash it can be 16M.
So I was considering if we should enable this with Radix. Hence the ask to better understand this.

-ritesh

#9 lore raw

Re: [RFC v2 2/4] mm: add static huge zero folio

Quoted 10 lines
Quoted 4 lines

This option can waste memory in small systems or systems with 64k base page size. So make it an opt-in and also add an option from individual architecture so that we don't enable this feature for larger base page size systems.

Can you please help me understand why will there be memory waste with 64k base pagesize, if this feature gets enabled?

Is it because systems with 64k base pagsize can have a much larger PMD size then 2M and hence this static huge folio won't really get used?

Yeah, exactly. More than 2M seems to be excessive for zeroing.

Quoted 5 lines

Just want to understand this better. On Power with Radix MMU, PMD size is still 2M, but with Hash it can be 16M.
So I was considering if we should enable this with Radix. Hence the ask to better understand this.

I enabled only for x86 as a part of this series to reduce the scope. But the idea is to enable for all architectures with reasonable PMD size, like ARM with 4k, Power with Radix MMU, etc.

Once we get the base patches up, I can follow up with enabling for those architectures.

--
Pankaj

#10 lore raw

Re: [RFC v2 2/4] mm: add static huge zero folio

In reply to Pankaj Raghav (Samsung)
Quoted 22 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

There are many places in the kernel where we need to zeroout larger chunks but the maximum segment we can zeroout at a time by ZERO_PAGE is limited by PAGE_SIZE.

This is especially annoying in block devices and filesystems where we attach multiple ZERO_PAGEs to the bio in different bvecs. With multipage bvec support in block layer, it is much more efficient to send out larger zero pages as a part of single bvec.

This concern was raised during the review of adding LBS support to XFS[1][2].

Usually huge_zero_folio is allocated on demand, and it will be deallocated by the shrinker if there are no users of it left. At moment, huge_zero_folio infrastructure refcount is tied to the process lifetime that created it. This might not work for bio layer as the completions can be async and the process that created the huge_zero_folio might no longer be alive. And, one of the main point that came during discussion is to have something bigger than zero page as a drop-in replacement.

Quoted 1 line

Add a config option STATIC_HUGE_ZERO_FOLIO that will always allocate

"... will result in allocating the huge zero folio on first request, if not already allocated, and turn it static such that it can never get freed."

Quoted 135 lines

the huge_zero_folio, and it will never drop the reference. This makes using the huge_zero_folio without having to pass any mm struct and does not tie the lifetime of the zero folio to anything, making it a drop-in replacement for ZERO_PAGE.

If STATIC_HUGE_ZERO_FOLIO config option is enabled, then mm_get_huge_zero_folio() will simply return this page instead of dynamically allocating a new PMD page.

This option can waste memory in small systems or systems with 64k base page size. So make it an opt-in and also add an option from individual architecture so that we don't enable this feature for larger base page size systems.

Quoted 1 line

[1] https://lore.kernel.org/linux-xfs/[email protected]/

[2] https://lore.kernel.org/linux-xfs/[email protected]/

---
  arch/x86/Kconfig        |  1 +
  include/linux/huge_mm.h | 18 ++++++++++++++++++
  mm/Kconfig              | 21 +++++++++++++++++++++
  mm/huge_memory.c        | 42 +++++++++++++++++++++++++++++++++++++++++
  4 files changed, 82 insertions(+)
arch/x86/Kconfig +1 -0
index 0ce86e14ab5e..8e2aa1887309 100644
@@ -153,6 +153,7 @@ config X86
  	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP	if X86_64
  	select ARCH_WANT_HUGETLB_VMEMMAP_PREINIT if X86_64
  	select ARCH_WANTS_THP_SWAP		if X86_64
+	select ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO if X86_64
  	select ARCH_HAS_PARANOID_L1D_FLUSH
  	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
  	select BUILDTIME_TABLE_SORT
include/linux/huge_mm.h +18 -0
index 7748489fde1b..78ebceb61d0e 100644
@@ -476,6 +476,7 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf);
 
  extern struct folio *huge_zero_folio;
  extern unsigned long huge_zero_pfn;
+extern atomic_t huge_zero_folio_is_static;
 
  static inline bool is_huge_zero_folio(const struct folio *folio)
  {
@@ -494,6 +495,18 @@ static inline bool is_huge_zero_pmd(pmd_t pmd)
 
  struct folio *mm_get_huge_zero_folio(struct mm_struct *mm);
  void mm_put_huge_zero_folio(struct mm_struct *mm);
+struct folio *__get_static_huge_zero_folio(void);
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	if (!IS_ENABLED(CONFIG_STATIC_HUGE_ZERO_FOLIO))
+		return NULL;
+
+	if (likely(atomic_read(&huge_zero_folio_is_static)))
+		return huge_zero_folio;
+
+	return __get_static_huge_zero_folio();
+}
 
  static inline bool thp_migration_supported(void)
  {
@@ -685,6 +698,11 @@ static inline int change_huge_pud(struct mmu_gather *tlb,
  {
  	return 0;
  }
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	return NULL;
+}
  #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
  static inline int split_folio_to_list_to_order(struct folio *folio,
mm/Kconfig +21 -0
index 0287e8d94aea..e2132fcf2ccb 100644
@@ -835,6 +835,27 @@ config ARCH_WANT_GENERAL_HUGETLB
  config ARCH_WANTS_THP_SWAP
  	def_bool n
 
+config ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO
+	def_bool n
+
+config STATIC_HUGE_ZERO_FOLIO
+	bool "Allocate a PMD sized folio for zeroing"
+	depends on ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO && TRANSPARENT_HUGEPAGE
+	help
+	  Without this config enabled, the huge zero folio is allocated on
+	  demand and freed under memory pressure once no longer in use.
+	  To detect remaining users reliably, references to the huge zero folio
+	  must be tracked precisely, so it is commonly only available for mapping
+	  it into user page tables.
+
+	  With this config enabled, the huge zero folio can also be used
+	  for other purposes that do not implement precise reference counting:
+	  it is still allocated on demand, but never freed, allowing for more
+	  wide-spread use, for example, when performing I/O similar to the
+	  traditional shared zeropage.
+
+	  Not suitable for memory constrained systems.
+
  config MM_ID
  	def_bool n
 
mm/huge_memory.c +7 -0
index 5d8365d1d3e9..c160c37f4d31 100644
@@ -75,6 +75,7 @@ static unsigned long deferred_split_scan(struct shrinker *shrink,
  static bool split_underused_thp = true;
 
  static atomic_t huge_zero_refcount;
+atomic_t huge_zero_folio_is_static __read_mostly;
  struct folio *huge_zero_folio __read_mostly;
  unsigned long huge_zero_pfn __read_mostly = ~0UL;
  unsigned long huge_anon_orders_always __read_mostly;
@@ -266,6 +267,47 @@ void mm_put_huge_zero_folio(struct mm_struct *mm)
  		put_huge_zero_page();
  }
 
+#ifdef CONFIG_STATIC_HUGE_ZERO_FOLIO
+#define FAIL_COUNT_LIMIT 2
+
+struct folio *__get_static_huge_zero_folio(void)
+{
+	static unsigned long fail_count_clear_timer;

mm/huge_memory.c void mm_put_huge_zero_folio(struct mm_struct *mm) · line 285

Quoted 10 lines
mm/huge_memory.c +10 -0
+	static atomic_t huge_zero_static_fail_count __read_mostly;
+
+	if (unlikely(!slab_is_available()))
+		return NULL;
+
+	/*
+	 * If we failed to allocate a huge zero folio multiple times,
+	 * just refrain from trying for one minute before retrying to get
+	 * a reference again.
+	 */

Is this "try twice" really worth it? Just try once, and if it fails, try only again in the future.

I guess we'll learn how that will behave in practice, and how we'll have to fine-tune it :)

In shrink_huge_zero_page_scan(), should we probably warn if something buggy happens?

Something like

mm/huge_memory.c +5 -1
index 2b4ea5a2ce7d2..b1109f8699a24 100644
@@ -277,7 +277,11 @@ static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
                                       struct shrink_control *sc)
 {
        if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
-               struct folio *zero_folio = xchg(&huge_zero_folio, NULL);
+               struct folio *zero_folio;
+
+               if (WARN_ON_ONCE(atomic_read(&huge_zero_folio_is_static)))
+                       return 0;
+               zero_folio = xchg(&huge_zero_folio, NULL);
                BUG_ON(zero_folio == NULL);
                WRITE_ONCE(huge_zero_pfn, ~0UL);
                folio_put(zero_folio);
Signature · 3 lines
Cheers,

David / dhildenb
#11 lore raw

Re: [RFC v2 2/4] mm: add static huge zero folio

Quoted 23 lines · David Hildenbrand
Quoted 22 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

There are many places in the kernel where we need to zeroout larger chunks but the maximum segment we can zeroout at a time by ZERO_PAGE is limited by PAGE_SIZE.

This is especially annoying in block devices and filesystems where we attach multiple ZERO_PAGEs to the bio in different bvecs. With multipage bvec support in block layer, it is much more efficient to send out larger zero pages as a part of single bvec.

This concern was raised during the review of adding LBS support to XFS[1][2].

Usually huge_zero_folio is allocated on demand, and it will be deallocated by the shrinker if there are no users of it left. At moment, huge_zero_folio infrastructure refcount is tied to the process lifetime that created it. This might not work for bio layer as the completions can be async and the process that created the huge_zero_folio might no longer be alive. And, one of the main point that came during discussion is to have something bigger than zero page as a drop-in replacement.

Quoted 3 lines
Quoted 1 line

Add a config option STATIC_HUGE_ZERO_FOLIO that will always allocate

"... will result in allocating the huge zero folio on first request, if not already allocated, and turn it static such that it can never get freed."

Sounds good.

Quoted 131 lines
Quoted 131 lines

the huge_zero_folio, and it will never drop the reference. This makes using the huge_zero_folio without having to pass any mm struct and does not tie the lifetime of the zero folio to anything, making it a drop-in replacement for ZERO_PAGE.

If STATIC_HUGE_ZERO_FOLIO config option is enabled, then mm_get_huge_zero_folio() will simply return this page instead of dynamically allocating a new PMD page.

This option can waste memory in small systems or systems with 64k base page size. So make it an opt-in and also add an option from individual architecture so that we don't enable this feature for larger base page size systems.

Quoted 1 line

[1] https://lore.kernel.org/linux-xfs/[email protected]/

[2] https://lore.kernel.org/linux-xfs/[email protected]/

---
  arch/x86/Kconfig        |  1 +
  include/linux/huge_mm.h | 18 ++++++++++++++++++
  mm/Kconfig              | 21 +++++++++++++++++++++
  mm/huge_memory.c        | 42 +++++++++++++++++++++++++++++++++++++++++
  4 files changed, 82 insertions(+)
arch/x86/Kconfig +1 -0
index 0ce86e14ab5e..8e2aa1887309 100644
@@ -153,6 +153,7 @@ config X86
  	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP	if X86_64
  	select ARCH_WANT_HUGETLB_VMEMMAP_PREINIT if X86_64
  	select ARCH_WANTS_THP_SWAP		if X86_64
+	select ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO if X86_64
  	select ARCH_HAS_PARANOID_L1D_FLUSH
  	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
  	select BUILDTIME_TABLE_SORT
include/linux/huge_mm.h +18 -0
index 7748489fde1b..78ebceb61d0e 100644
@@ -476,6 +476,7 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf);
  extern struct folio *huge_zero_folio;
  extern unsigned long huge_zero_pfn;
+extern atomic_t huge_zero_folio_is_static;
  static inline bool is_huge_zero_folio(const struct folio *folio)
  {
@@ -494,6 +495,18 @@ static inline bool is_huge_zero_pmd(pmd_t pmd)
  struct folio *mm_get_huge_zero_folio(struct mm_struct *mm);
  void mm_put_huge_zero_folio(struct mm_struct *mm);
+struct folio *__get_static_huge_zero_folio(void);
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	if (!IS_ENABLED(CONFIG_STATIC_HUGE_ZERO_FOLIO))
+		return NULL;
+
+	if (likely(atomic_read(&huge_zero_folio_is_static)))
+		return huge_zero_folio;
+
+	return __get_static_huge_zero_folio();
+}
  static inline bool thp_migration_supported(void)
  {
@@ -685,6 +698,11 @@ static inline int change_huge_pud(struct mmu_gather *tlb,
  {
  	return 0;
  }
+
+static inline struct folio *get_static_huge_zero_folio(void)
+{
+	return NULL;
+}
  #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
  static inline int split_folio_to_list_to_order(struct folio *folio,
mm/Kconfig +21 -0
index 0287e8d94aea..e2132fcf2ccb 100644
@@ -835,6 +835,27 @@ config ARCH_WANT_GENERAL_HUGETLB
  config ARCH_WANTS_THP_SWAP
  	def_bool n
+config ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO
+	def_bool n
+
+config STATIC_HUGE_ZERO_FOLIO
+	bool "Allocate a PMD sized folio for zeroing"
+	depends on ARCH_WANTS_STATIC_HUGE_ZERO_FOLIO && TRANSPARENT_HUGEPAGE
+	help
+	  Without this config enabled, the huge zero folio is allocated on
+	  demand and freed under memory pressure once no longer in use.
+	  To detect remaining users reliably, references to the huge zero folio
+	  must be tracked precisely, so it is commonly only available for mapping
+	  it into user page tables.
+
+	  With this config enabled, the huge zero folio can also be used
+	  for other purposes that do not implement precise reference counting:
+	  it is still allocated on demand, but never freed, allowing for more
+	  wide-spread use, for example, when performing I/O similar to the
+	  traditional shared zeropage.
+
+	  Not suitable for memory constrained systems.
+
  config MM_ID
  	def_bool n
mm/huge_memory.c +11 -0
index 5d8365d1d3e9..c160c37f4d31 100644
@@ -75,6 +75,7 @@ static unsigned long deferred_split_scan(struct shrinker *shrink,
  static bool split_underused_thp = true;
  static atomic_t huge_zero_refcount;
+atomic_t huge_zero_folio_is_static __read_mostly;
  struct folio *huge_zero_folio __read_mostly;
  unsigned long huge_zero_pfn __read_mostly = ~0UL;
  unsigned long huge_anon_orders_always __read_mostly;
@@ -266,6 +267,47 @@ void mm_put_huge_zero_folio(struct mm_struct *mm)
  		put_huge_zero_page();
  }
+#ifdef CONFIG_STATIC_HUGE_ZERO_FOLIO
+#define FAIL_COUNT_LIMIT 2
+
+struct folio *__get_static_huge_zero_folio(void)
+{
+	static unsigned long fail_count_clear_timer;
+	static atomic_t huge_zero_static_fail_count __read_mostly;
+
+	if (unlikely(!slab_is_available()))
+		return NULL;
Quoted 9 lines

mm/huge_memory.c void mm_put_huge_zero_folio(struct mm_struct *mm) · line 284

Quoted 6 lines
mm/huge_memory.c +6 -0
+
+	/*
+	 * If we failed to allocate a huge zero folio multiple times,
+	 * just refrain from trying for one minute before retrying to get
+	 * a reference again.
+	 */

Is this "try twice" really worth it? Just try once, and if it fails, try only again in the future.

Yeah, that makes sense. Let's go with try it once for now.

Quoted 4 lines

I guess we'll learn how that will behave in practice, and how we'll have to fine-tune it :)

In shrink_huge_zero_page_scan(), should we probably warn if something buggy happens?

Yeah, I can fold this in the next version. I guess WARN_ON_ONCE already adds an unlikely to the conditition which is appropriate.

Quoted 25 lines

Something like

mm/huge_memory.c +5 -1
index 2b4ea5a2ce7d2..b1109f8699a24 100644
@@ -277,7 +277,11 @@ static unsigned long shrink_huge_zero_page_scan(struct shrinker *shrink,
                                       struct shrink_control *sc)
 {
        if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
-               struct folio *zero_folio = xchg(&huge_zero_folio, NULL);
+               struct folio *zero_folio;
+
+               if (WARN_ON_ONCE(atomic_read(&huge_zero_folio_is_static)))
+                       return 0;
+               zero_folio = xchg(&huge_zero_folio, NULL);
                BUG_ON(zero_folio == NULL);
                WRITE_ONCE(huge_zero_pfn, ~0UL);
                folio_put(zero_folio);
Signature · 2 lines
-- 
Cheers,

--
Pankaj

#12 lore raw

RFC v2 3/4 mm: add largest_zero_folio() routine

In reply to Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

Add largest_zero_folio() routine so that huge_zero_folio can be used directly when CONFIG_STATIC_HUGE_ZERO_FOLIO is enabled. This will return ZERO_PAGE folio if CONFIG_STATIC_HUGE_ZERO_FOLIO is disabled or if we failed to allocate a huge_zero_folio.

---
 include/linux/huge_mm.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
include/linux/huge_mm.h +17 -0
index 78ebceb61d0e..c44a6736704b 100644
@@ -716,4 +716,21 @@ static inline int split_folio_to_order(struct folio *folio, int new_order)
 	return split_folio_to_list_to_order(folio, NULL, new_order);
 }
 
+/*
+ * largest_zero_folio - Get the largest zero size folio available
+ *
+ * This function will return huge_zero_folio if CONFIG_STATIC_HUGE_ZERO_FOLIO
+ * is enabled. Otherwise, a ZERO_PAGE folio is returned.
+ *
+ * Deduce the size of the folio with folio_size instead of assuming the
+ * folio size.
+ */
+static inline struct folio *largest_zero_folio(void)
+{
+	struct folio *folio = get_static_huge_zero_folio();
+
+	if (folio)
+		return folio;
+	return page_folio(ZERO_PAGE(0));
+}
 #endif /* _LINUX_HUGE_MM_H */
Signature · 1 line
2.49.0
#13 lore raw

Re: [RFC v2 3/4] mm: add largest_zero_folio() routine

Quoted 3 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

Add largest_zero_folio() routine so that huge_zero_folio can be

[largest]_zero_folio() can sound a bit confusing with largest in it's name. Maybe optimal_zero_folio()?

No hard opinion though. Will leave it upto you.

-ritesh

Quoted 39 lines

used directly when CONFIG_STATIC_HUGE_ZERO_FOLIO is enabled. This will return ZERO_PAGE folio if CONFIG_STATIC_HUGE_ZERO_FOLIO is disabled or if we failed to allocate a huge_zero_folio.

---
 include/linux/huge_mm.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
include/linux/huge_mm.h +17 -0
index 78ebceb61d0e..c44a6736704b 100644
@@ -716,4 +716,21 @@ static inline int split_folio_to_order(struct folio *folio, int new_order)
 	return split_folio_to_list_to_order(folio, NULL, new_order);
 }
 
+/*
+ * largest_zero_folio - Get the largest zero size folio available
+ *
+ * This function will return huge_zero_folio if CONFIG_STATIC_HUGE_ZERO_FOLIO
+ * is enabled. Otherwise, a ZERO_PAGE folio is returned.
+ *
+ * Deduce the size of the folio with folio_size instead of assuming the
+ * folio size.
+ */
+static inline struct folio *largest_zero_folio(void)
+{
+	struct folio *folio = get_static_huge_zero_folio();
+
+	if (folio)
+		return folio;
+	return page_folio(ZERO_PAGE(0));
+}
 #endif /* _LINUX_HUGE_MM_H */
Signature · 1 line
2.49.0
#14 lore raw

Re: [RFC v2 3/4] mm: add largest_zero_folio() routine

Quoted 8 lines · Ritesh Harjani (IBM)
Quoted 3 lines · Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

Add largest_zero_folio() routine so that huge_zero_folio can be

[largest]_zero_folio() can sound a bit confusing with largest in it's name. Maybe optimal_zero_folio()?

I prefer largest, it clearly documents what you get.

huge vs large is a different discussion that goes back to "huge pages -> huge zero page".

Signature · 3 lines
Cheers,

David / dhildenb
#15 lore raw

RFC v2 4/4 block: use largest_zero_folio in __blkdev_issue_zero_pages()

In reply to Pankaj Raghav (Samsung)

From: Pankaj Raghav <[email protected]>

Use largest_zero_folio() in __blkdev_issue_zero_pages(). On systems with CONFIG_STATIC_HUGE_ZERO_FOLIO enabled, we will end up sending larger bvecs instead of multiple small ones.

Noticed a 4% increase in performance on a commercial NVMe SSD which does not support OP_WRITE_ZEROES. The device's MDTS was 128K. The performance gains might be bigger if the device supports bigger MDTS.

---
 block/blk-lib.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
block/blk-lib.c +8 -7
index 4c9f20a689f7..3030a772d3aa 100644
@@ -196,6 +196,8 @@ static void __blkdev_issue_zero_pages(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned int flags)
 {
+	struct folio *zero_folio = largest_zero_folio();
+
 	while (nr_sects) {
 		unsigned int nr_vecs = __blkdev_sectors_to_bio_pages(nr_sects);
 		struct bio *bio;
@@ -208,15 +210,14 @@ static void __blkdev_issue_zero_pages(struct block_device *bdev,
 			break;
 
 		do {
-			unsigned int len, added;
+			unsigned int len;
 
-			len = min_t(sector_t,
-				PAGE_SIZE, nr_sects << SECTOR_SHIFT);
-			added = bio_add_page(bio, ZERO_PAGE(0), len, 0);
-			if (added < len)
+			len = min_t(sector_t, folio_size(zero_folio),
+				    nr_sects << SECTOR_SHIFT);
+			if (!bio_add_folio(bio, zero_folio, len, 0))
 				break;
-			nr_sects -= added >> SECTOR_SHIFT;
-			sector += added >> SECTOR_SHIFT;
+			nr_sects -= len >> SECTOR_SHIFT;
+			sector += len >> SECTOR_SHIFT;
 		} while (nr_sects);
 
 		*biop = bio_chain_and_submit(*biop, bio);
Signature · 1 line
2.49.0