ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
PATCH 1/1 ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used.
[0] https://bugs.debian.org/845611
--- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +4 -0
@@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; };
Signature · 1 line
2.10.2
PATCH 1/1 ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
[CC Arnd Bergmann]
Quoted 31 lines · Roger Shimizu
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used.
[0] https://bugs.debian.org/845611
Fixes b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")Reported-by Ryan Tandy <[email protected]>Tested-by Ryan Tandy <[email protected]>Signed-off-by Roger Shimizu <[email protected]>--- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +4
-1@@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; --
Quoted 2 lines
2.10.2
Is there any chance to get this simple fix into v4.9 or next v4.10? Thank you!
Signature · 2 lines
Roger Shimizu, GMT +9 Tokyo PGP/GPG: 4096R/6C6ACD6417B3ACB1
PATCH 1/1 ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
Hi Roger,
Quoted 26 lines · Roger Shimizu
[CC Arnd Bergmann]
Quoted 23 lines · Roger Shimizu
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used.
[0] https://bugs.debian.org/845611
Fixes b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")Reported-by Ryan Tandy <[email protected]>Tested-by Ryan Tandy <[email protected]>Signed-off-by Roger Shimizu <[email protected]>--- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +0
-0@@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; };
Quoted 13 lines
Quoted 10 lines
arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +4
-1+&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; --2.10.2
Is there any chance to get this simple fix into v4.9 or next v4.10? Thank you!
I can apply it on mvebu/fixes and make a pull request. But I don't know if Arnd or Olof will get it.
Let's see ahow it goes.
Gregory
Quoted 3 lines
Signature · 2 lines
Roger Shimizu, GMT +9 Tokyo PGP/GPG: 4096R/6C6ACD6417B3ACB1
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
In reply to Roger ShimizuHi Roger,
Quoted 11 lines · Roger Shimizu
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used.
[0] https://bugs.debian.org/845611
Fixes b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")Reported-by Ryan Tandy <[email protected]>Tested-by Ryan Tandy <[email protected]>Signed-off-by Roger Shimizu <[email protected]>
Applied on mvebu/fixes
Thanks,
Gregory
Quoted 22 lines
--- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +4
-0@@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; };Signature · 1 line
2.10.2
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com