Skip to contentSkip to conversation

configs/qemu: bump relevant config versions

PATCH New Gustavo Zacarias 2 participants 5 messages Nov 5, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 configs/qemu: bump relevant config versions

---
 board/qemu/arm-nuri/readme.txt                                    | 2 +-
 board/qemu/arm-versatile/{linux-3.11.config => linux-3.12.config} | 0
 board/qemu/arm-versatile/readme.txt                               | 2 +-
 board/qemu/arm-vexpress/readme.txt                                | 2 +-
 .../microblazebe-mmu/{linux-3.11.config => linux-3.12.config}     | 0
 board/qemu/microblazebe-mmu/readme.txt                            | 2 +-
 .../microblazeel-mmu/{linux-3.11.config => linux-3.12.config}     | 0
 board/qemu/microblazeel-mmu/readme.txt                            | 2 +-
 board/qemu/mips-malta/{linux-3.11.config => linux-3.12.config}    | 0
 board/qemu/mips-malta/readme.txt                                  | 2 +-
 board/qemu/mips64-malta/{linux-3.11.config => linux-3.12.config}  | 0
 board/qemu/mips64-malta/readme.txt                                | 2 +-
 board/qemu/mipsel-malta/{linux-3.11.config => linux-3.12.config}  | 0
 board/qemu/mipsel-malta/readme.txt                                | 2 +-
 .../qemu/powerpc-g3beige/{linux-3.11.config => linux-3.12.config} | 0
 board/qemu/powerpc-g3beige/readme.txt                             | 2 +-
 board/qemu/powerpc-mpc8544ds/readme.txt                           | 2 +-
 board/qemu/powerpc-virtex-ml507/readme.txt                        | 2 +-
 board/qemu/sh4-r2d/readme.txt                                     | 2 +-
 board/qemu/sparc-ss10/readme.txt                                  | 2 +-
 board/qemu/x86/{linux-3.11.config => linux-3.12.config}           | 0
 board/qemu/x86/readme.txt                                         | 2 +-
 board/qemu/x86_64/{linux-3.11.config => linux-3.12.config}        | 0
 board/qemu/x86_64/readme.txt                                      | 2 +-
 configs/qemu_arm_nuri_defconfig                                   | 4 ++--
 configs/qemu_arm_versatile_defconfig                              | 8 ++++----
 configs/qemu_arm_vexpress_defconfig                               | 6 +++---
 configs/qemu_microblazebe_mmu_defconfig                           | 4 ++--
 configs/qemu_microblazeel_mmu_defconfig                           | 4 ++--
 configs/qemu_mips64_malta_defconfig                               | 8 ++++----
 configs/qemu_mips_malta_defconfig                                 | 8 ++++----
 configs/qemu_mipsel_malta_defconfig                               | 8 ++++----
 configs/qemu_ppc_g3beige_defconfig                                | 8 ++++----
 configs/qemu_ppc_mpc8544ds_defconfig                              | 6 +++---
 configs/qemu_ppc_virtex_ml507_defconfig                           | 6 +++---
 configs/qemu_sh4_r2d_defconfig                                    | 4 ++--
 configs/qemu_sparc_ss10_defconfig                                 | 6 +++---
 configs/qemu_x86_64_defconfig                                     | 8 ++++----
 configs/qemu_x86_defconfig                                        | 8 ++++----
 39 files changed, 63 insertions(+), 63 deletions(-)
 rename board/qemu/arm-versatile/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/microblazebe-mmu/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/microblazeel-mmu/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/mips-malta/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/mips64-malta/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/mipsel-malta/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/powerpc-g3beige/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/x86/{linux-3.11.config => linux-3.12.config} (100%)
 rename board/qemu/x86_64/{linux-3.11.config => linux-3.12.config} (100%)
board/qemu/arm-nuri/readme.txt +1 -1
index 0fed2f7..6fdba81 100644
@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/arm-versatile/linux-3.12.config renamed from board/qemu/arm-versatile/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/arm-versatile/linux-3.11.config
rename to board/qemu/arm-versatile/linux-3.12.config
board/qemu/arm-versatile/readme.txt +1 -1
index 4902c54..7d0745f 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/arm-vexpress/readme.txt +1 -1
index 65d1996..9a4694d 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/microblazebe-mmu/linux-3.12.config renamed from board/qemu/microblazebe-mmu/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-3.11.config
rename to board/qemu/microblazebe-mmu/linux-3.12.config
board/qemu/microblazebe-mmu/readme.txt +1 -1
index 473a934..8ade434 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/microblazeel-mmu/linux-3.12.config renamed from board/qemu/microblazeel-mmu/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-3.11.config
rename to board/qemu/microblazeel-mmu/linux-3.12.config
board/qemu/microblazeel-mmu/readme.txt +1 -1
index baddc7a..9ac55db 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/mips-malta/linux-3.12.config renamed from board/qemu/mips-malta/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/mips-malta/linux-3.11.config
rename to board/qemu/mips-malta/linux-3.12.config
board/qemu/mips-malta/readme.txt +1 -1
index 33764ea..b367927 100644
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/mips64-malta/linux-3.12.config renamed from board/qemu/mips64-malta/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/mips64-malta/linux-3.11.config
rename to board/qemu/mips64-malta/linux-3.12.config
board/qemu/mips64-malta/readme.txt +1 -1
index 23b85ab..4fa8a19 100644
@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/mipsel-malta/linux-3.12.config renamed from board/qemu/mipsel-malta/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/mipsel-malta/linux-3.11.config
rename to board/qemu/mipsel-malta/linux-3.12.config
board/qemu/mipsel-malta/readme.txt +1 -1
index 1e17828..b77cc84 100644
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/powerpc-g3beige/linux-3.12.config renamed from board/qemu/powerpc-g3beige/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/powerpc-g3beige/linux-3.11.config
rename to board/qemu/powerpc-g3beige/linux-3.12.config
board/qemu/powerpc-g3beige/readme.txt +1 -1
index 4c0bf8a..07cb660 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/powerpc-mpc8544ds/readme.txt +1 -1
index 8c57ead..cd56ddd 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/powerpc-virtex-ml507/readme.txt +1 -1
index e958d49..a9a6378 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/sh4-r2d/readme.txt +1 -1
index 45fca86..2a963eb 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/sparc-ss10/readme.txt +1 -1
index dab4028..725ab30 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/x86/linux-3.12.config renamed from board/qemu/x86/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/x86/linux-3.11.config
rename to board/qemu/x86/linux-3.12.config
board/qemu/x86/readme.txt +1 -1
index 5f3af40..c07000c 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
board/qemu/x86_64/linux-3.12.config renamed from board/qemu/x86_64/linux-3.11.config +0 -0
similarity index 100%
rename from board/qemu/x86_64/linux-3.11.config
rename to board/qemu/x86_64/linux-3.12.config
board/qemu/x86_64/readme.txt +1 -1
index d9eaf56..3c344f9 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1
configs/qemu_arm_nuri_defconfig +2 -2
index 20b825a..965f55d 100644
@@ -15,11 +15,11 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 
 # Lock to 3.10 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.15"
+BR2_DEFAULT_KERNEL_VERSION="3.10.18"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.18"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y
configs/qemu_arm_versatile_defconfig +4 -4
index 322fc18..88df6c8 100644
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.12.config"
 BR2_LINUX_KERNEL_ZIMAGE=y
configs/qemu_arm_vexpress_defconfig +3 -3
index 8bd12af..324a811 100644
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y
configs/qemu_microblazebe_mmu_defconfig +2 -2
index adc7074..0a621b1 100644
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"
configs/qemu_microblazeel_mmu_defconfig +2 -2
index 7920505..51d58c6 100644
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"
configs/qemu_mips64_malta_defconfig +4 -4
index 0fde6c6..c0904b5 100644
@@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config
configs/qemu_mips_malta_defconfig +4 -4
index 6b952de..6e2c601 100644
@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config
configs/qemu_mipsel_malta_defconfig +4 -4
index 0b9137a..ff640a1 100644
@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config
configs/qemu_ppc_g3beige_defconfig +4 -4
index 513c49e..bd0bc03 100644
@@ -6,16 +6,16 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config
configs/qemu_ppc_mpc8544ds_defconfig +3 -3
index 5396cfa..687b537 100644
@@ -6,14 +6,14 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
 BR2_LINUX_KERNEL_VMLINUX=y
 
configs/qemu_ppc_virtex_ml507_defconfig +3 -3
index 62dd741..a0dc674 100644
@@ -6,9 +6,9 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -16,7 +16,7 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/qemu_sh4_r2d_defconfig +2 -2
index 99743a1..f7671d1 100644
@@ -12,7 +12,7 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 3.2 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.2.51"
+BR2_DEFAULT_KERNEL_VERSION="3.2.52"
 
 # The kernel wants to use the -m4-nofpu option to make sure that it
 # doesn't use floating point operations.
@@ -21,7 +21,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.51"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
 BR2_LINUX_KERNEL_ZIMAGE=y
configs/qemu_sparc_ss10_defconfig +3 -3
index 37c40c4..67bffbd 100644
@@ -6,13 +6,13 @@ BR2_sparc_v8=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y
configs/qemu_x86_64_defconfig +4 -4
index 520fcf1..816cef1 100644
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.12.config"
configs/qemu_x86_defconfig +4 -4
index 7609cde..ccccfa2 100644
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.12.config"
Signature · 1 line
1.8.1.5
#1 lore raw

PATCH 2/4 configs/imx233_olinuxino: bump to the latest versions

Also tweak the kernel and buildroot config for basic WiFi support. And fetch the ASoC patches for builtin audio.

---
 ...x-01-mmc-mxs-mmc-add-cd-inverted-property.patch |  47 ---------
 ...02-mmc-mxs-mmc-add-non-removable-property.patch |  53 ----------
 ...nux-03-mmc-mxs-mmc-add-broken-cd-property.patch |  50 ----------
 ...-imx23-olinuxino-mark-sdcard-cd-as-broken.patch |  28 ------
 .../{linux-3.9.config => linux-3.12.config}        | 111 ++++++++++-----------
 .../mxs-bootlets/mxs-bootlets-01-olinuxino.patch   |   6 +-
 board/olimex/imx233_olinuxino/readme.txt           |   6 +-
 configs/olimex_imx233_olinuxino_defconfig          |  23 ++++-
 8 files changed, 75 insertions(+), 249 deletions(-)
 delete mode 100644 board/olimex/imx233_olinuxino/linux-01-mmc-mxs-mmc-add-cd-inverted-property.patch
 delete mode 100644 board/olimex/imx233_olinuxino/linux-02-mmc-mxs-mmc-add-non-removable-property.patch
 delete mode 100644 board/olimex/imx233_olinuxino/linux-03-mmc-mxs-mmc-add-broken-cd-property.patch
 delete mode 100644 board/olimex/imx233_olinuxino/linux-04-ARM-dts-imx23-olinuxino-mark-sdcard-cd-as-broken.patch
 rename board/olimex/imx233_olinuxino/{linux-3.9.config => linux-3.12.config} (70%)
board/olimex/imx233_olinuxino/linux-01-mmc-mxs-mmc-add-cd-inverted-property.patch deleted +0 -47
deleted file mode 100644
index 6e58c8c..0000000
@@ -1,47 +0,0 @@
-From 4c0c9be05004d1eb674b7586216b3d93cc04531c Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <[email protected]>
-Date: Wed, 10 Apr 2013 11:13:43 +0200
-Subject: [PATCH 1/3] mmc: mxs-mmc: add cd-inverted property
-
-The card-detect GPIO is inverted on some boards. Handle such case.
-
-Acked-by: Shawn Guo <[email protected]>
-Signed-off-by: Marc Kleine-Budde <[email protected]>
-Signed-off-by: Chris Ball <[email protected]>
----
- drivers/mmc/host/mxs-mmc.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
-index 4efe302..0cdf1f6 100644
---- a/drivers/mmc/host/mxs-mmc.c
-+++ b/drivers/mmc/host/mxs-mmc.c
-@@ -72,6 +72,7 @@ struct mxs_mmc_host {
- 	int				sdio_irq_en;
- 	int				wp_gpio;
- 	bool				wp_inverted;
-+	bool				cd_inverted;
- };
-
- static int mxs_mmc_get_ro(struct mmc_host *mmc)
-@@ -96,7 +97,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
- 	struct mxs_ssp *ssp = &host->ssp;
-
- 	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
--		 BM_SSP_STATUS_CARD_DETECT);
-+		 BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
- }
-
- static void mxs_mmc_reset(struct mxs_mmc_host *host)
-@@ -691,6 +692,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
- 	if (flags & OF_GPIO_ACTIVE_LOW)
- 		host->wp_inverted = 1;
-
-+	host->cd_inverted = of_property_read_bool(np, "cd-inverted");
-+
- 	mmc->f_min = 400000;
- 	mmc->f_max = 288000000;
- 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
---
-1.8.1.5
-
board/olimex/imx233_olinuxino/linux-02-mmc-mxs-mmc-add-non-removable-property.patch deleted +0 -53

53 lines not on this page · raw message

board/olimex/imx233_olinuxino/linux-03-mmc-mxs-mmc-add-broken-cd-property.patch deleted +0 -50

50 lines not on this page · raw message

board/olimex/imx233_olinuxino/linux-04-ARM-dts-imx23-olinuxino-mark-sdcard-cd-as-broken.patch deleted +0 -28
deleted file mode 100644
index 7ce42b9..0000000
@@ -1,28 +0,0 @@
-From 1897fda94190498573f9d1b72bc6b7b58c720957 Mon Sep 17 00:00:00 2001
-From: Alexandre Pereira da Silva <[email protected]>
-Date: Sat, 6 Apr 2013 10:42:10 -0300
-Subject: [PATCH 1/1] ARM: dts: imx23-olinuxino: mark sdcard cd as broken
-
-The imx23-olinuxino sdcard doesn't have card detect.
-
-Signed-off-by: Alexandre Pereira da Silva <[email protected]>
-Signed-off-by: Shawn Guo <[email protected]>
----
- arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
-index e7484e4..d107c4a 100644
---- a/arch/arm/boot/dts/imx23-olinuxino.dts
-+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
-@@ -29,6 +29,7 @@
- 				pinctrl-names = "default";
- 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
- 				bus-width = <4>;
-+				broken-cd;
- 				status = "okay";
- 			};
-
---
-1.8.1.5
-
board/olimex/imx233_olinuxino/linux-3.12.config renamed from board/olimex/imx233_olinuxino/linux-3.9.config +50 -61

203 lines not on this page · raw message

board/olimex/imx233_olinuxino/mxs-bootlets/mxs-bootlets-01-olinuxino.patch +3 -3
index 91b57c3..54c3ca0 100644
@@ -65,9 +65,9 @@ diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt
 --- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt	1969-12-31 21:00:00.000000000 -0300
 +++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt	2013-05-17 15:07:49.663496106 -0300
 @@ -0,0 +1,3 @@
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
 diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
 --- imx-bootlets-src-10.12.01/linux_prep/core/setup.c	2010-11-04 04:35:38.000000000 -0300
 +++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c	2013-05-17 15:08:39.246114205 -0300
board/olimex/imx233_olinuxino/readme.txt +4 -2
index fa3f9e1..1c36a61 100644
@@ -1,5 +1,7 @@
-This configuration is intended as a base image, it doesn't have support
-for things like WiFi, either in the kernel or packages.
+This configuration is intended as a base image.
+It includes kernel and firmware support for the common USB WiFi hardware.
+Packages for WiFi support are up to the user, you'll probably want
+one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
 
 It also pulls up the console on the serial port, not on TV output.
 
configs/olimex_imx233_olinuxino_defconfig +18 -5
index 206e468..e43ee08 100644
@@ -13,8 +13,9 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.9 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_9=y
+# Lock headers version to match and avoid breakage
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Bootloader
 BR2_TARGET_MXS_BOOTLETS=y
@@ -25,9 +26,21 @@ BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD_NAME="imx23_olinuxino_dev"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/imx233_olinuxino/linux-3.9.config"
-BR2_LINUX_KERNEL_PATCH="board/olimex/imx233_olinuxino"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/imx233_olinuxino/linux-3.12.config"
+BR2_LINUX_KERNEL_PATCH="http://github.com/koliqi/imx23-olinuxino/raw/3.12-rc2/kernel/101-soc-audio-dts.patch http://github.com/koliqi/imx23-olinuxino/raw/3.12-rc2/kernel/ASoC_driver_for_i.MX233.patch"
 BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx23-olinuxino"
+
+# For automatic firmware loading
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+
+# Firmware for WiFi
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
+BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
+BR2_PACKAGE_ZD1211_FIRMWARE=y
Signature · 1 line
1.8.1.5
#2 lore raw

PATCH 3/4 configs/mpc8315erdb: bump to the latest and greatest versions

In reply to Gustavo Zacarias
---
 .../freescale/mpc8315erdb/{linux-3.11.config => linux-3.12.config}  | 0
 board/freescale/mpc8315erdb/readme.txt                              | 2 +-
 configs/freescale_mpc8315erdb_defconfig                             | 6 +++---
 3 files changed, 4 insertions(+), 4 deletions(-)
 rename board/freescale/mpc8315erdb/{linux-3.11.config => linux-3.12.config} (100%)
board/freescale/mpc8315erdb/linux-3.12.config renamed from board/freescale/mpc8315erdb/linux-3.11.config +0 -0
similarity index 100%
rename from board/freescale/mpc8315erdb/linux-3.11.config
rename to board/freescale/mpc8315erdb/linux-3.12.config
board/freescale/mpc8315erdb/readme.txt +1 -1
index f7f9c94..ed70795 100644
@@ -6,7 +6,7 @@ It won't work for NOR and will brick that bootloader!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2013.04 is known good for NAND.
+2013.10 is known good for NAND.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
configs/freescale_mpc8315erdb_defconfig +3 -3
index dc4c810..11e64db 100644
@@ -12,14 +12,14 @@ BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
 
 # Lock headers version to match and avoid breakage
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.5"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.5"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-3.12.config"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb"
Signature · 1 line
1.8.1.5
#3 lore raw

PATCH 4/4 configs/p1010rdb: bump to the latest and greatest versions

In reply to Gustavo Zacarias
---
 board/freescale/p1010rdb/{linux-3.11.config => linux-3.12.config} | 0
 board/freescale/p1010rdb/readme.txt                               | 2 +-
 configs/freescale_p1010rdb_defconfig                              | 6 +++---
 3 files changed, 4 insertions(+), 4 deletions(-)
 rename board/freescale/p1010rdb/{linux-3.11.config => linux-3.12.config} (100%)
board/freescale/p1010rdb/linux-3.12.config renamed from board/freescale/p1010rdb/linux-3.11.config +0 -0
similarity index 100%
rename from board/freescale/p1010rdb/linux-3.11.config
rename to board/freescale/p1010rdb/linux-3.12.config
board/freescale/p1010rdb/readme.txt +1 -1
index 5b56873..42706fd 100644
@@ -6,7 +6,7 @@ It won't work for NAND or SPI and will brick those bootloaders!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2013.04 is known good for NOR.
+2013.10 is known good for NOR.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
configs/freescale_p1010rdb_defconfig +3 -3
index 76a0be2..0a727c4 100644
@@ -11,14 +11,14 @@ BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x20000
 
 # Lock headers version to match and avoid breakage
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.5"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.5"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.12.config"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb"
Signature · 1 line
1.8.1.5