Skip to contentSkip to conversation

omniorb: cleanup autobuild failure, CFLAGS issue

PATCH New Matt Weber 2 participants 2 messages Oct 1, 2013 – Oct 2, 2013

lore
Share & tools
lore

Matt Weber

author
#0 lore raw

PATCH v2 1/1 omniorb: cleanup autobuild failure, CFLAGS issue

Fixed:
http://autobuild.buildroot.net/results/a08baf8821e3ee1fb9c36c8f74c4ced466af167b/
http://autobuild.buildroot.net/results/f0c7379c1f405385d3a64c0349c3d9565065e8a7/
http://autobuild.buildroot.net/results/c3de25ca52fdb8ffda7472cf9f7b64514954cbb1/

Change Log:
The target CFLAGS were getting mixed in during a manual build of some omniorb pkg tools that could be viewed as host tools.
This manual build was a dirty workaround and created some bad cornercases. So I converted the package over to actually using the host pkg build and removed the need for a patch and custom mods in the build.

Also there wasn't a dependency on the target having python, just host-python for performing the initial build. So depends were adjusted accordingly. If python bindings are required, they can be found in a different package called omniORBpy. The omniORB package only uses python for the build process.

Fixed a bug with long double support. Currently leaving it disabled as most targets won't use it. This allows greater toolchain compatibility.

---
Changes v1 -> v2:
* Moved host dependencies up by target depends package/omniorb/Config.in (suggested by Arnout)
* Added host conf opt to also host disable longdouble (host and target are forced to match, since tools share headers)
* Renamed post config hook
package/omniorb/Config.in (suggested by Arnout)

 package/omniorb/omniorb.mk |   53 ++++++++++++++++++++------------------------
 1 files changed, 24 insertions(+), 29 deletions(-)
package/omniorb/omniorb.mk +24 -29
index 8a41dc7..490ff93 100644
@@ -10,37 +10,32 @@ OMNIORB_SOURCE = omniORB-$(OMNIORB_VERSION).tar.bz2
 OMNIORB_INSTALL_STAGING = YES
 OMNIORB_LICENSE = GPL2+ LGPLv2.1+
 OMNIORB_LICENSE_FILES = COPYING COPYING.LIB
-# Required for internal code generation scripts
-OMNIORB_DEPENDENCIES = host-python
+OMNIORB_DEPENDENCIES = host-omniorb
+HOST_OMNIORB_DEPENDENCIES = host-python
+OMNIORB_INSTALL_TARGET = YES
 
-ifeq ($(BR2_PACKAGE_PYTHON),y)
-	OMNIORB_DEPENDENCIES += python
-	OMNIORB_CONF_OPT += --enable-python-bindings
-else
-	OMNIORB_CONF_OPT += --disable-python-bindings
-endif
+# Defaulting long double support to a safe option for the
+# mix of embedded targets, this could later be automated
+# based on checking the capability of the cross toolchain
+# for "__LONG_DOUBLE_128__".  Currently the host and target
+# need to match because of the code generation done by the
+# host tools during the target compile (ie headers generated
+# on host are used in target build).
+OMNIORB_CONF_OPT += --disable-longdouble
+HOST_OMNIORB_CONF_OPT += --disable-longdouble
 
-# omniORB is currently not cross-compile friendly and has some assumptions
-# where a couple host tools are built in place and then used during the
-# build.  The tools generate code from the IDL description language, which
-# is then built into the cross compiled OMNIORB application.
-# So this first hook builds the tools required for the host side
-# generation of code. Then the second hook cleans up before the install.
-define OMNIORB_BUILD_TOOLS
-	$(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
-		-C $(@D)/src/tool export
+# omniORB is not completely cross-compile friendly and has some
+# assumptions where a couple host tools must be built and then
+# used by the target build.  The host tools generate code from
+# the IDL description language, which is then built into the
+# cross compiled target OMNIORB application.
+define OMNIORB_ADJUST_TOOLDIR
+	# Point to the host folder to get HOST_OMNIORB tools
+	$(SED) 's:TOOLBINDIR = $$(TOP)/$$(BINDIR):TOOLBINDIR = $(HOST_DIR)/usr/bin:g' $(@D)/mk/beforeauto.mk
+	# Disables OMNIORB tool building
+	echo "EmbeddedSystem=1" >> $(@D)/mk/beforeauto.mk
 endef
-OMNIORB_POST_CONFIGURE_HOOKS += OMNIORB_BUILD_TOOLS
-
-define OMNIORB_CLEAN_TOOLS
-	$(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
-		-C $(@D)/src/tool clean
-endef
-OMNIORB_POST_BUILD_HOOKS += OMNIORB_CLEAN_TOOLS
-
-define OMNIORB_FIXUP_FILE_PATHS_HOOK
-	$(SED) "s:$(HOST_DIR)/usr:/usr:g" $(STAGING_DIR)/usr/bin/omniidl
-endef
-OMNIORB_POST_INSTALL_STAGING_HOOKS += OMNIORB_FIXUP_FILE_PATHS_HOOK
+OMNIORB_POST_CONFIGURE_HOOKS += OMNIORB_ADJUST_TOOLDIR
 
 $(eval $(autotools-package))
+$(eval $(host-autotools-package))
Signature · 1 line
1.7.1
#1 lore raw

PATCH v2 1/1 omniorb: cleanup autobuild failure, CFLAGS issue

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Matt" == Matt Weber <[email protected]> writes:

Matt> Fixed:
Matt> http://autobuild.buildroot.net/results/a08baf8821e3ee1fb9c36c8f74c4ced466af167b/
Matt> http://autobuild.buildroot.net/results/f0c7379c1f405385d3a64c0349c3d9565065e8a7/
Matt> http://autobuild.buildroot.net/results/c3de25ca52fdb8ffda7472cf9f7b64514954cbb1/

Matt> Change Log:
Matt> The target CFLAGS were getting mixed in during a manual build of some Matt> omniorb pkg tools that could be viewed as host tools.
Matt> This manual build was a dirty workaround and created some bad Matt> cornercases. So I converted the package over to actually using the Matt> host pkg build and removed the need for a patch and custom mods in the build.

Matt> Also there wasn't a dependency on the target having python, just Matt> host-python for performing the initial build. So depends were adjusted Matt> accordingly. If python bindings are required, they can be found in a different Matt> package called omniORBpy. The omniORB package only uses python for Matt> the build process.

Matt> Fixed a bug with long double support. Currently leaving it Matt> disabled as most targets won't use it. This allows greater Matt> toolchain compatibility.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard