broken DSDT on sony vaio pcg-grx500
Compiling the decompiled DSDT gives me two errors. One error was that it required ByteAcc access which I fixed easily. The other error is:
dsdt.dsl 16: Return (DCST)
Error 1022 - Object does not exist ^ (DCST)
The region of code it corresponds to is:
DefinitionBlock ("DSDT.aml", "DSDT", 1, "SONY", "B0", 537002772)
{
Scope (_PR)
{
Processor (CPU0, 0x00, 0x00001010, 0x06) {}
Scope (\_PR.CPU0)
{
Method (_CST, 0, NotSerialized)
{
Return (DCST)
}
}Changing DCST to _CST and compiling it gives me segmentation fault while compiling. Realizing that it is dangerous, I tried various things like DSDT, \_CST, etc. Changing it to 0x0 did not give me any errors or warnings. Then I changed it to 0x033 which also did not give me any error. So, I think changing it to 0x0 or 0x033 is incorrect.
I am using iasl-linux-20030918 to compile my dsl file.
Can anyone point me to the solution to this error?
Thanks,
asubedi
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 23 lines · asu
Compiling the decompiled DSDT gives me two errors. One error was that it required ByteAcc access which I fixed easily. The other error is:
dsdt.dsl 16: Return (DCST)
Error 1022 - Object does not exist ^ (DCST)The region of code it corresponds to is:
DefinitionBlock ("DSDT.aml", "DSDT", 1, "SONY", "B0", 537002772)
{ Scope (_PR) { Processor (CPU0, 0x00, 0x00001010, 0x06) {} Scope (\_PR.CPU0) { Method (_CST, 0, NotSerialized) { Return (DCST) } }
Quoted 8 lines
Changing DCST to
_CSTand compiling it gives me segmentation fault while compiling. Realizing that it is dangerous, I tried various things like DSDT, \_CST, etc. Changing it to0x0did not give me any errors or warnings. Then I changed it to0x033which also did not give me any error. So, I think changing it to0x0or0x033is incorrect.I am using iasl-linux-20030918 to compile my dsl file.
There is good chance that your system do have a table called SSDT, which contains a DCST package.
Try something like
sudo ./acpidmp/acpidmp | grep SSDT
to see if I'm correct.
Then
./acpidmp/acpidmp SSDT > ssdt
hd ssdt
will dump the SSDT. Look then if something like DCST do exist.
In that case, just making something like:
Method (_CST, 0, NotSerialized)
{
External(DCST)
Return (DCST)
}should be ok.
If that is not the case, I'm afraid that I need the full dump from acpidmp (no just the DSDT) to look. For this:
wget http://developer.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.tar.gz
tar xzvfp pmtools-20010730.tar.gz
cd pmtools-20010730/acpidmp
make
sudo ./acpidmp > acpidmp.out
gzip acpidmp.out.gz
Signature · 11 lines
Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care. ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click