Skip to contentSkip to conversation

board/freescale: switch to u-boot 2013.04

PATCH New Gustavo Zacarias 2 participants 3 messages May 6, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 board/freescale: switch to u-boot 2013.04

---
 board/freescale/mpc8315erdb/readme.txt  | 2 +-
 board/freescale/p1010rdb/readme.txt     | 2 +-
 configs/freescale_mpc8315erdb_defconfig | 2 +-
 configs/freescale_p1010rdb_defconfig    | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
board/freescale/mpc8315erdb/readme.txt +1 -1
index 91e58e4..f7f9c94 100644
@@ -6,7 +6,7 @@ It won't work for NOR and will brick that bootloader!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2012.10 is known good for NAND.
+2013.04 is known good for NAND.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
board/freescale/p1010rdb/readme.txt +1 -1
index 96293b7..5b56873 100644
@@ -6,7 +6,7 @@ It won't work for NAND or SPI and will brick those bootloaders!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2012.10 is known good for NOR, but BAD for NAND and SPI.
+2013.04 is known good for NOR.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
configs/freescale_mpc8315erdb_defconfig +1 -1
index 9f733fa..88e0d8a 100644
@@ -30,4 +30,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND"
-BR2_TARGET_UBOOT_2012_10=y
+BR2_TARGET_UBOOT_2013_04=y
configs/freescale_p1010rdb_defconfig +1 -1
index a36f07c..8887636 100644
@@ -29,4 +29,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"
-BR2_TARGET_UBOOT_2012_10=y
+BR2_TARGET_UBOOT_2013_04=y
Signature · 1 line
1.8.1.5
#1 lore raw

PATCH 1/1 board/freescale: switch to u-boot 2013.04

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Gustavo" == Gustavo Zacarias <[email protected]> writes:

Gustavo> Signed-off-by: Gustavo Zacarias <[email protected]>

Committed, thanks.

Gustavo> @@ -29,4 +29,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

 Gustavo>  # Bootloader
 Gustavo>  BR2_TARGET_UBOOT=y
 Gustavo>  BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"

Gustavo> -BR2_TARGET_UBOOT_2012_10=y
Gustavo> +BR2_TARGET_UBOOT_2013_04=y

This will have to change to UBOOT_CUSTOM_VERSION once that lands.

Signature · 1 line
Bye, Peter Korsgaard
#2 lore raw

PATCH 1/1 board/freescale: switch to u-boot 2013.04

Quoted 1 line · Peter Korsgaard

This will have to change to UBOOT_CUSTOM_VERSION once that lands.

Yes, it would probably be a good policy to do it for all the board configurations.
Regards.