Skip to contentSkip to conversation

rpi-firmware: Fixup config.txt

PATCH New Maxime Hadjinlian 2 participants 2 messages Apr 30, 2013 – May 2, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rpi-firmware: Fixup config.txt

The default name of the kernel binary for the RaspberryPi is kernel.img, it's only a zImage kernel renamed.
Since Buildroot will build a zImage, the default config should use the zImage name instead of forcing the user to rename a file.

This patch also remove the cmdline argument rootfstype. There is no point forcing the user to use ext4 for its root partition.

---
 package/rpi-firmware/config.txt |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
package/rpi-firmware/config.txt +2 -1
index 2cabd68..a818762 100644
@@ -6,9 +6,10 @@
 
 arm_freq=700
 core_freq=250
+kernel=zImage
 disable_overscan=1
 gpu_mem_256=100
 gpu_mem_512=100
 sdram_freq=400
 over_voltage=0
-cmdline="dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+cmdline="dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootwait"
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/1 rpi-firmware: Fixup config.txt

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Maxime" == Maxime Hadjinlian <[email protected]> writes:

Maxime> The default name of the kernel binary for the RaspberryPi is Maxime> kernel.img, it's only a zImage kernel renamed. Since Buildroot Maxime> will build a zImage, the default config should use the zImage Maxime> name instead of forcing the user to rename a file.

Maxime> This patch also remove the cmdline argument rootfstype. There Maxime> is no point forcing the user to use ext4 for its root Maxime> partition.

Maxime> Signed-off-by: Maxime Hadjinlian <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard