qemu/x86: update to use kernel 3.6.6
PATCH 1/11 qemu/x86: update to use kernel 3.6.6
---
.../x86/{linux-3.5.config => linux-3.6.config} | 0
board/qemu/x86/readme.txt | 2 +-
configs/qemu_x86_defconfig | 8 ++++----
3 files changed, 5 insertions(+), 5 deletions(-)
rename board/qemu/x86/{linux-3.5.config => linux-3.6.config} (100%)board/qemu/x86/linux-3.6.config renamed from board/qemu/x86/linux-3.5.config +0 -0
board/qemu/x86/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_x86_defconfig +4 -4
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.6.config"
Signature · 1 line
1.7.8.6
PATCH 2/11 qemu/x86_64: update to use kernel 3.6.6
---
.../x86_64/{linux-3.5.config => linux-3.6.config} | 0
board/qemu/x86_64/readme.txt | 2 +-
configs/qemu_x86_64_defconfig | 8 ++++----
3 files changed, 5 insertions(+), 5 deletions(-)
rename board/qemu/x86_64/{linux-3.5.config => linux-3.6.config} (100%)board/qemu/x86_64/linux-3.6.config renamed from board/qemu/x86_64/linux-3.5.config +0 -0
board/qemu/x86_64/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_x86_64_defconfig +4 -4
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.6.config"
Signature · 1 line
1.7.8.6
PATCH 3/11 qemu/sparc: update to use kernel 3.6.6
In reply to Gustavo Zacarias--- board/qemu/sparc-ss10/readme.txt | 2 +- configs/qemu_sparc_ss10_defconfig | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
board/qemu/sparc-ss10/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_sparc_ss10_defconfig +3 -3
@@ -6,12 +6,12 @@ BR2_sparc_supersparc=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_DEFCONFIG="sparc32" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.7.8.6
PATCH 4/11 qemu/ppc-mpc8544ds: update to use kernel 3.6.6
In reply to Gustavo Zacarias--- board/qemu/powerpc-mpc8544ds/readme.txt | 2 +- configs/qemu_ppc_mpc8544ds_defconfig | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
board/qemu/powerpc-mpc8544ds/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_ppc_mpc8544ds_defconfig +3 -3
@@ -6,13 +6,13 @@ BR2_powerpc_8548=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx" BR2_LINUX_KERNEL_VMLINUX=y
Signature · 1 line
1.7.8.6
PATCH 5/11 qemu/sh4-r2d: update to use kernel 3.2.33
In reply to Gustavo Zacarias--- board/qemu/sh4-r2d/readme.txt | 2 +- configs/qemu_sh4_r2d_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
board/qemu/sh4-r2d/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_sh4_r2d_defconfig +1 -1
@@ -20,7 +20,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu" # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.30" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.33" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.7.8.6
PATCH 6/11 qemu/ppc-g3beige: update to use kernel 3.6.6
In reply to Gustavo Zacarias---
.../{linux-3.3.config => linux-3.6.config} | 0
board/qemu/powerpc-g3beige/readme.txt | 2 ++
configs/qemu_ppc_g3beige_defconfig | 8 ++++----
3 files changed, 6 insertions(+), 4 deletions(-)
rename board/qemu/powerpc-g3beige/{linux-3.3.config => linux-3.6.config} (100%)board/qemu/powerpc-g3beige/linux-3.6.config renamed from board/qemu/powerpc-g3beige/linux-3.3.config +0 -0
board/qemu/powerpc-g3beige/readme.txt +2 -0
@@ -4,3 +4,5 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. + +Tested with QEMU 1.2.0
configs/qemu_ppc_g3beige_defconfig +4 -4
@@ -6,15 +6,15 @@ BR2_powerpc_750=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.3 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_3=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.3.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.3.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.6.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
1.7.8.6
PATCH 7/11 qemu/arm-vexpress: update to use kernel 3.6.6
In reply to Gustavo Zacarias--- board/qemu/arm-vexpress/readme.txt | 2 +- configs/qemu_arm_vexpress_defconfig | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
board/qemu/arm-vexpress/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_arm_vexpress_defconfig +3 -3
@@ -11,12 +11,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.7.8.6
PATCH 8/11 qemu/arm-versatile: update to use kernel 3.6.6
In reply to Gustavo Zacarias---
.../{linux-3.5.config => linux-3.6.config} | 0
board/qemu/arm-versatile/readme.txt | 2 ++
configs/qemu_arm_versatile_defconfig | 8 ++++----
3 files changed, 6 insertions(+), 4 deletions(-)
rename board/qemu/arm-versatile/{linux-3.5.config => linux-3.6.config} (100%)board/qemu/arm-versatile/linux-3.6.config renamed from board/qemu/arm-versatile/linux-3.5.config +0 -0
board/qemu/arm-versatile/readme.txt +2 -0
@@ -4,3 +4,5 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. + +Tested with QEMU 1.2.0
configs/qemu_arm_versatile_defconfig +4 -4
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.6.config" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.7.8.6
PATCH 9/11 qemu/microblaze: update to use kernel 3.6.6
In reply to Gustavo Zacarias---
.../{kernel-3.5.config => linux-3.6.config} | 0
board/qemu/microblazebe-mmu/readme.txt | 2 +-
.../{kernel-3.5.config => linux-3.6.config} | 0
board/qemu/microblazeel-mmu/readme.txt | 2 +-
configs/qemu_microblazebe_mmu_defconfig | 4 ++--
configs/qemu_microblazeel_mmu_defconfig | 4 ++--
6 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/microblazebe-mmu/{kernel-3.5.config => linux-3.6.config} (100%)
rename board/qemu/microblazeel-mmu/{kernel-3.5.config => linux-3.6.config} (100%)board/qemu/microblazebe-mmu/linux-3.6.config renamed from board/qemu/microblazebe-mmu/kernel-3.5.config +0 -0
board/qemu/microblazebe-mmu/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
board/qemu/microblazeel-mmu/linux-3.6.config renamed from board/qemu/microblazeel-mmu/kernel-3.5.config +0 -0
board/qemu/microblazeel-mmu/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_microblazebe_mmu_defconfig +2 -2
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/kernel-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.6.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"
configs/qemu_microblazeel_mmu_defconfig +2 -2
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/kernel-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.6.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"
Signature · 1 line
1.7.8.6
PATCH 10/11 qemu/mips{el}-malta: update to use kernel 3.6.6
In reply to Gustavo Zacarias---
.../{linux-3.5.config => linux-3.6.config} | 0
board/qemu/mips-malta/readme.txt | 2 +-
.../{linux-3.5.config => linux-3.6.config} | 0
board/qemu/mipsel-malta/readme.txt | 2 +-
configs/qemu_mips_malta_defconfig | 8 ++++----
configs/qemu_mipsel_malta_defconfig | 8 ++++----
6 files changed, 10 insertions(+), 10 deletions(-)
rename board/qemu/mips-malta/{linux-3.5.config => linux-3.6.config} (100%)
rename board/qemu/mipsel-malta/{linux-3.5.config => linux-3.6.config} (100%)board/qemu/mips-malta/linux-3.6.config renamed from board/qemu/mips-malta/linux-3.5.config +0 -0
board/qemu/mips-malta/readme.txt +1 -1
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
board/qemu/mipsel-malta/linux-3.6.config renamed from board/qemu/mipsel-malta/linux-3.5.config +0 -0
board/qemu/mipsel-malta/readme.txt +1 -1
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.1.1 +Tested with QEMU 1.2.0
configs/qemu_mips_malta_defconfig +4 -4
@@ -6,15 +6,15 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.6.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
configs/qemu_mipsel_malta_defconfig +4 -4
@@ -6,15 +6,15 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.5 headers to avoid breaking with newer kernels -BR2_KERNEL_HEADERS_3_5=y +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.6.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
1.7.8.6
PATCH 11/11 qemu/mips64-malta: update to use kernel 3.6.6
In reply to Gustavo Zacarias---
.../{linux-3.5.config => linux-3.6.config} | 0
board/qemu/mips64-malta/readme.txt | 4 ++++
configs/qemu_mips64_malta_defconfig | 7 +++++--
3 files changed, 9 insertions(+), 2 deletions(-)
rename board/qemu/mips64-malta/{linux-3.5.config => linux-3.6.config} (100%)board/qemu/mips64-malta/linux-3.6.config renamed from board/qemu/mips64-malta/linux-3.5.config +0 -0
board/qemu/mips64-malta/readme.txt +4 -0
@@ -5,3 +5,7 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. + +This configuration is known to be flaky. + +Tested with QEMU 1.2.0
configs/qemu_mips64_malta_defconfig +5 -2
@@ -10,12 +10,15 @@ BR2_PREFER_STATIC_LIB=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set +# Lock to 3.6 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_6=y + # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.5.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.6.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
1.7.8.6
PATCH 1/11 qemu/x86: update to use kernel 3.6.6
In reply to Gustavo ZacariasQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <[email protected]>
Committed series, thanks.
Signature · 1 line
Bye, Peter Korsgaard