powerpc/hv-gpci: Fix hv_gpci event list
PATCH v2 1/1 powerpc/hv-gpci: Fix hv_gpci event list
Based on getPerfCountInfo v1.018 documentation, some of the hv_gpci events got deprecated for platforms firmware that supports counter_info_version 0x8 or above.
Patch fixes the hv_gpci event list by adding a new attribute group called "hv_gpci_event_attrs_v6" and a "EVENT_ENABLE" macro to enable these events for platform firmware that supports counter_info_version 0x6 or below. And assigning the hv_gpci event list based on output counter info version of underlying plaform.
---
Changelog:
v1 -> v2
- As suggested by Michael Ellerman, using counter_info_version value rather then cpu_has_feature() to assign hv-gpci event list.
arch/powerpc/perf/hv-gpci-requests.h | 4 ++++ arch/powerpc/perf/hv-gpci.c | 35 ++++++++++++++++++++++++++-- arch/powerpc/perf/hv-gpci.h | 1 + arch/powerpc/perf/req-gen/perf.h | 17 ++++++++++++++ 4 files changed, 55 insertions(+), 2 deletions(-)
arch/powerpc/perf/hv-gpci-requests.h +4 -0
@@ -79,6 +79,7 @@ REQUEST(__field(0, 8, partition_id) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE /* * Not available for counter_info_version >= 0x8, use * run_instruction_cycles_by_partition(0x100) instead.
@@ -92,6 +93,7 @@ REQUEST(__field(0, 8, partition_id) __count(0x10, 8, cycles) )#include I (REQUEST_END ) +#endif #define REQUEST_NAME system_performance_capabilities#define REQUEST_NUM 0x40
@@ -103,6 +105,7 @@ REQUEST(__field(0, 1, perf_collect_privileged) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE #define REQUEST_NAME processor_bus_utilization_abc_links#define REQUEST_NUM 0x50#define REQUEST_IDX_KIND "hw_chip_id=?"
@@ -194,6 +197,7 @@ REQUEST(__field(0, 4, phys_processor_idx) __count(0x28, 8, instructions_completed) )#include I (REQUEST_END ) +#endif /* Processor_core_power_mode (0x95) skipped, no counters */ /* Affinity_domain_information_by_virtual_processor (0xA0) skipped,
arch/powerpc/perf/hv-gpci.c +33 -2
@@ -70,9 +70,9 @@ static const struct attribute_group format_group = { .attrs = format_attrs, }; -static const struct attribute_group event_group = { +static struct attribute_group event_group = { .name ="events" , - .attrs = hv_gpci_event_attrs, +/* .attrs is set in init */ };#define HV_CAPS_ATTR (_name, _format) \
@@ -330,6 +330,7 @@ static int hv_gpci_init(void)int r;unsigned long hret;struct hv_perf_caps caps; +struct hv_gpci_request_buffer *arg;hv_gpci_assert_offsets_correct ();
@@ -353,6 +354,36 @@ static int hv_gpci_init(void)/* sampling not supported */ h_gpci_pmu.capabilities |=PERF_PMU_CAP_NO_INTERRUPT ; + arg = (void *)get_cpu_var (hv_gpci_reqb); +memset (arg,0 ,HGPCI_REQ_BUFFER_SIZE ); + +/* +* hcall H_GET_PERF_COUNTER_INFO populates the output +* counter_info_version value based on the system hypervisor. +* Pass the counter request 0x10 corresponds to request type +* 'Dispatch_timebase_by_processor', to get the supported +* counter_info_version. +*/ + arg->params.counter_request =cpu_to_be32 (0x10 ); + + r =plpar_hcall_norets (H_GET_PERF_COUNTER_INFO , +virt_to_phys (arg),HGPCI_REQ_BUFFER_SIZE ); +if (r) { +pr_devel ("hcall failed, can't get supported counter_info_version: 0x%x\n" , r); + arg->params.counter_info_version_out =0x8 ; + } + +/* +* Use counter_info_version_out value to assign +* required hv-gpci event list. +*/ +if (arg->params.counter_info_version_out >=0x8 ) + event_group.attrs = hv_gpci_event_attrs; +else + event_group.attrs = hv_gpci_event_attrs_v6; + +put_cpu_var (hv_gpci_reqb); + r =perf_pmu_register (&h_gpci_pmu, h_gpci_pmu.name,-1 );if (r)return r;
arch/powerpc/perf/hv-gpci.h +1 -0
@@ -26,6 +26,7 @@ enum {#define REQUEST_FILE "../hv-gpci-requests.h"#define NAME_LOWER hv_gpci#define NAME_UPPER HV_GPCI +#define EVENT_ENABLE #include "req-gen/perf.h" #undef REQUEST_FILE#undef NAME_LOWER
arch/powerpc/perf/req-gen/perf.h +17 -0
@@ -139,6 +139,23 @@ PMU_EVENT_ATTR_STRING( \#define REQUEST_ (r_name, r_value, r_idx_1, r_fields) \ r_fields +/* Generate event list for platforms with counter_info_version 0x6 or below */ +static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = { +#include REQUEST_FILE +NULL +}; + +/* +* Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci +* events got deprecated for platforms firmware that supports +* counter_info_version 0x8 or above. +* Undefining macro EVENT_ENABLE, to disable the addition of deprecated +* events in "hv_gpci_event_attrs" attribute group, for platforms that +* supports counter_info_version 0x8 or above. +*/ +#undef EVENT_ENABLE + +/* Generate event list for platforms with counter_info_version 0x8 or above*/ static __maybe_unused struct attribute *hv_gpci_event_attrs[] = { #include REQUEST_FILE NULL
Signature · 1 line
2.31.1
Quoted 15 lines · Kajol Jain
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpcievents got deprecated for platforms firmware that supportscounter_info_version0x8or above.Patch fixes the
hv_gpcievent list by adding a new attribute group called "hv_gpci_event_attrs_v6" and a "EVENT_ENABLE" macro to enable these events for platform firmware that supportscounter_info_version0x6or below. And assigning thehv_gpcievent list based on output counter info version of underlying plaform.
Quoted 3 lines
Fixes 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")Signed-off-by Kajol Jain <[email protected]>Reviewed-by Madhavan Srinivasan <[email protected]>
Thanks
Athira
Quoted 153 lines
---
Changelog:v1 -> v2
- As suggested by Michael Ellerman, usingcounter_info_versionvalue rather thencpu_has_feature()to assign hv-gpci event list.arch/powerpc/perf/hv-gpci-requests.h | 4 ++++ arch/powerpc/perf/hv-gpci.c | 35 ++++++++++++++++++++++++++-- arch/powerpc/perf/hv-gpci.h | 1 + arch/powerpc/perf/req-gen/perf.h | 17 ++++++++++++++ 4 files changed, 55 insertions(+), 2 deletions(-)arch/powerpc/perf/hv-gpci-requests.h +4
-0@@ -79,6 +79,7 @@ REQUEST(__field(0, 8, partition_id) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE /* * Not available for counter_info_version >= 0x8, use * run_instruction_cycles_by_partition(0x100) instead. @@ -92,6 +93,7 @@ REQUEST(__field(0, 8, partition_id) __count(0x10, 8, cycles) )#include I (REQUEST_END ) +#endif #define REQUEST_NAME system_performance_capabilities#define REQUEST_NUM 0x40@@ -103,6 +105,7 @@ REQUEST(__field(0, 1, perf_collect_privileged) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE #define REQUEST_NAME processor_bus_utilization_abc_links#define REQUEST_NUM 0x50#define REQUEST_IDX_KIND "hw_chip_id=?"@@ -194,6 +197,7 @@ REQUEST(__field(0, 4, phys_processor_idx) __count(0x28, 8, instructions_completed) )#include I (REQUEST_END ) +#endif /* Processor_core_power_mode (0x95) skipped, no counters */ /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, arch/powerpc/perf/hv-gpci.c +33
-2@@ -70,9 +70,9 @@ static const struct attribute_group format_group = { .attrs = format_attrs, }; -static const struct attribute_group event_group = { +static struct attribute_group event_group = { .name ="events" , - .attrs = hv_gpci_event_attrs, +/* .attrs is set in init */ };#define HV_CAPS_ATTR (_name, _format) \@@ -330,6 +330,7 @@ static int hv_gpci_init(void)int r;unsigned long hret;struct hv_perf_caps caps; +struct hv_gpci_request_buffer *arg;hv_gpci_assert_offsets_correct ();@@ -353,6 +354,36 @@ static int hv_gpci_init(void)/* sampling not supported */ h_gpci_pmu.capabilities |=PERF_PMU_CAP_NO_INTERRUPT ; + arg = (void *)get_cpu_var (hv_gpci_reqb); +memset (arg,0 ,HGPCI_REQ_BUFFER_SIZE ); + +/* +* hcall H_GET_PERF_COUNTER_INFO populates the output +* counter_info_version value based on the system hypervisor. +* Pass the counter request 0x10 corresponds to request type +* 'Dispatch_timebase_by_processor', to get the supported +* counter_info_version. +*/ + arg->params.counter_request =cpu_to_be32 (0x10 ); + + r =plpar_hcall_norets (H_GET_PERF_COUNTER_INFO , +virt_to_phys (arg),HGPCI_REQ_BUFFER_SIZE ); +if (r) { +pr_devel ("hcall failed, can't get supported counter_info_version: 0x%x\n" , r); + arg->params.counter_info_version_out =0x8 ; + } + +/* +* Use counter_info_version_out value to assign +* required hv-gpci event list. +*/ +if (arg->params.counter_info_version_out >=0x8 ) + event_group.attrs = hv_gpci_event_attrs; +else + event_group.attrs = hv_gpci_event_attrs_v6; + +put_cpu_var (hv_gpci_reqb); + r =perf_pmu_register (&h_gpci_pmu, h_gpci_pmu.name,-1 );if (r)return r;arch/powerpc/perf/hv-gpci.h +1
-0@@ -26,6 +26,7 @@ enum {#define REQUEST_FILE "../hv-gpci-requests.h"#define NAME_LOWER hv_gpci#define NAME_UPPER HV_GPCI +#define EVENT_ENABLE #include "req-gen/perf.h" #undef REQUEST_FILE#undef NAME_LOWERarch/powerpc/perf/req-gen/perf.h +17
-0@@ -139,6 +139,23 @@ PMU_EVENT_ATTR_STRING( \#define REQUEST_ (r_name, r_value, r_idx_1, r_fields) \ r_fields +/* Generate event list for platforms with counter_info_version 0x6 or below */ +static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = { +#include REQUEST_FILE +NULL +}; + +/* +* Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci +* events got deprecated for platforms firmware that supports +* counter_info_version 0x8 or above. +* Undefining macro EVENT_ENABLE, to disable the addition of deprecated +* events in "hv_gpci_event_attrs" attribute group, for platforms that +* supports counter_info_version 0x8 or above. +*/ +#undef EVENT_ENABLE + +/* Generate event list for platforms with counter_info_version 0x8 or above*/ static __maybe_unused struct attribute *hv_gpci_event_attrs[] = { #include REQUEST_FILE NULLSignature · 1 line
2.31.1
Michael Ellerman
reviewerQuoted 2 lines · Kajol Jain
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpcievents got deprecated for platforms firmware that
^ ^
were platform
Quoted 3 lines
supports
counter_info_version0x8or above.Patch fixes the
hv_gpcievent list by adding a new attribute
^
Fix the ...
Quoted 1 line
group called "
hv_gpci_event_attrs_v6" and a "EVENT_ENABLE"
Can we please give that macro a more descriptive name?
EVENT_ENABLE implies it enables/disables all events, but it's only certain ones.
Quoted 82 lines
macro to enable these events for platform firmware that supports
counter_info_version0x6or below. And assigning thehv_gpcievent list based on output counter info version of underlying plaform.Fixes 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")Signed-off-by Kajol Jain <[email protected]>Reviewed-by Madhavan Srinivasan <[email protected]>---
Changelog:v1 -> v2
- As suggested by Michael Ellerman, usingcounter_info_versionvalue rather thencpu_has_feature()to assign hv-gpci event list.arch/powerpc/perf/hv-gpci-requests.h | 4 ++++ arch/powerpc/perf/hv-gpci.c | 35 ++++++++++++++++++++++++++-- arch/powerpc/perf/hv-gpci.h | 1 + arch/powerpc/perf/req-gen/perf.h | 17 ++++++++++++++ 4 files changed, 55 insertions(+), 2 deletions(-)arch/powerpc/perf/hv-gpci-requests.h +4
-0@@ -79,6 +79,7 @@ REQUEST(__field(0, 8, partition_id) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE /* * Not available for counter_info_version >= 0x8, use * run_instruction_cycles_by_partition(0x100) instead. @@ -92,6 +93,7 @@ REQUEST(__field(0, 8, partition_id) __count(0x10, 8, cycles) )#include I (REQUEST_END ) +#endif #define REQUEST_NAME system_performance_capabilities#define REQUEST_NUM 0x40@@ -103,6 +105,7 @@ REQUEST(__field(0, 1, perf_collect_privileged) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE #define REQUEST_NAME processor_bus_utilization_abc_links#define REQUEST_NUM 0x50#define REQUEST_IDX_KIND "hw_chip_id=?"@@ -194,6 +197,7 @@ REQUEST(__field(0, 4, phys_processor_idx) __count(0x28, 8, instructions_completed) )#include I (REQUEST_END ) +#endif /* Processor_core_power_mode (0x95) skipped, no counters */ /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, arch/powerpc/perf/hv-gpci.c +3
-2@@ -70,9 +70,9 @@ static const struct attribute_group format_group = { .attrs = format_attrs, }; -static const struct attribute_group event_group = { +static struct attribute_group event_group = { .name ="events" , - .attrs = hv_gpci_event_attrs, +/* .attrs is set in init */ };#define HV_CAPS_ATTR (_name, _format) \@@ -330,6 +330,7 @@ static int hv_gpci_init(void)int r;unsigned long hret;struct hv_perf_caps caps; +struct hv_gpci_request_buffer *arg;hv_gpci_assert_offsets_correct ();
arch/powerpc/perf/hv-gpci.c static int hv_gpci_init(void) · line 363
Quoted 10 lines
arch/powerpc/perf/hv-gpci.c +7
-0@@ -353,6 +354,36 @@ static int hv_gpci_init(void)/* sampling not supported */ h_gpci_pmu.capabilities |=PERF_PMU_CAP_NO_INTERRUPT ; + arg = (void *)get_cpu_var (hv_gpci_reqb); +memset (arg,0 ,HGPCI_REQ_BUFFER_SIZE ); + +/* +* hcall H_GET_PERF_COUNTER_INFO populates the output +* counter_info_version value based on the system hypervisor. +* Pass the counter request 0x10 corresponds to request type
^
whichQuoted 45 lines
arch/powerpc/perf/hv-gpci.c +23
-0+* 'Dispatch_timebase_by_processor', to get the supported +* counter_info_version. +*/ + arg->params.counter_request =cpu_to_be32 (0x10 ); + + r =plpar_hcall_norets (H_GET_PERF_COUNTER_INFO , +virt_to_phys (arg),HGPCI_REQ_BUFFER_SIZE ); +if (r) { +pr_devel ("hcall failed, can't get supported counter_info_version: 0x%x\n" , r); + arg->params.counter_info_version_out =0x8 ; + } + +/* +* Use counter_info_version_out value to assign +* required hv-gpci event list. +*/ +if (arg->params.counter_info_version_out >=0x8 ) + event_group.attrs = hv_gpci_event_attrs; +else + event_group.attrs = hv_gpci_event_attrs_v6; + +put_cpu_var (hv_gpci_reqb); + r =perf_pmu_register (&h_gpci_pmu, h_gpci_pmu.name,-1 );if (r)return r;arch/powerpc/perf/hv-gpci.h +1
-0@@ -26,6 +26,7 @@ enum {#define REQUEST_FILE "../hv-gpci-requests.h"#define NAME_LOWER hv_gpci#define NAME_UPPER HV_GPCI +#define EVENT_ENABLE #include "req-gen/perf.h" #undef REQUEST_FILE#undef NAME_LOWERarch/powerpc/perf/req-gen/perf.h +0
-0@@ -139,6 +139,23 @@ PMU_EVENT_ATTR_STRING( \#define REQUEST_ (r_name, r_value, r_idx_1, r_fields) \ r_fields
arch/powerpc/perf/req-gen/perf.h PMU_EVENT_ATTR_STRING( \ · line 150
Quoted 10 lines
arch/powerpc/perf/req-gen/perf.h +9
-0+/* Generate event list for platforms with counter_info_version 0x6 or below */ +static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = { +#include REQUEST_FILE +NULL +}; + +/* +* Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci +* events got deprecated for platforms firmware that supports
Same wording as in the change log.
Quoted 13 lines
arch/powerpc/perf/req-gen/perf.h +8
-0+* counter_info_version 0x8 or above. +* Undefining macro EVENT_ENABLE, to disable the addition of deprecated +* events in "hv_gpci_event_attrs" attribute group, for platforms that +* supports counter_info_version 0x8 or above. +*/ +#undef EVENT_ENABLE + +/* Generate event list for platforms with counter_info_version 0x8 or above*/ static __maybe_unused struct attribute *hv_gpci_event_attrs[] = { #include REQUEST_FILE NULLSignature · 1 line
2.31.1
cheers
Quoted 12 lines · Michael Ellerman
Quoted 2 lines · Kajol Jain
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpcievents got deprecated for platforms firmware that^ ^
were platformQuoted 3 lines
supports
counter_info_version0x8or above.Patch fixes the
hv_gpcievent list by adding a new attribute^
Fix the ...
Quoted 6 lines
Quoted 1 line
group called "
hv_gpci_event_attrs_v6" and a "EVENT_ENABLE"Can we please give that macro a more descriptive name?
EVENT_ENABLEimplies it enables/disables all events, but it's only certain ones.
Hi Michael,
Thanks for the review comments, I will make these changes in next
version.
Thanks,
Kajol Jain
Quoted 168 lines
Quoted 83 lines
macro to enable these events for platform firmware that supports
counter_info_version0x6or below. And assigning thehv_gpcievent list based on output counter info version of underlying plaform.Fixes 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")Signed-off-by Kajol Jain <[email protected]>Reviewed-by Madhavan Srinivasan <[email protected]>---
Changelog:v1 -> v2
- As suggested by Michael Ellerman, usingcounter_info_versionvalue rather thencpu_has_feature()to assign hv-gpci event list.arch/powerpc/perf/hv-gpci-requests.h | 4 ++++ arch/powerpc/perf/hv-gpci.c | 35 ++++++++++++++++++++++++++-- arch/powerpc/perf/hv-gpci.h | 1 + arch/powerpc/perf/req-gen/perf.h | 17 ++++++++++++++ 4 files changed, 55 insertions(+), 2 deletions(-)arch/powerpc/perf/hv-gpci-requests.h +4
-0@@ -79,6 +79,7 @@ REQUEST(__field(0, 8, partition_id) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE /* * Not available for counter_info_version >= 0x8, use * run_instruction_cycles_by_partition(0x100) instead. @@ -92,6 +93,7 @@ REQUEST(__field(0, 8, partition_id) __count(0x10, 8, cycles) )#include I (REQUEST_END ) +#endif #define REQUEST_NAME system_performance_capabilities#define REQUEST_NUM 0x40@@ -103,6 +105,7 @@ REQUEST(__field(0, 1, perf_collect_privileged) )#include I (REQUEST_END ) +#ifdef EVENT_ENABLE #define REQUEST_NAME processor_bus_utilization_abc_links#define REQUEST_NUM 0x50#define REQUEST_IDX_KIND "hw_chip_id=?"@@ -194,6 +197,7 @@ REQUEST(__field(0, 4, phys_processor_idx) __count(0x28, 8, instructions_completed) )#include I (REQUEST_END ) +#endif /* Processor_core_power_mode (0x95) skipped, no counters */ /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, arch/powerpc/perf/hv-gpci.c +3
-2@@ -70,9 +70,9 @@ static const struct attribute_group format_group = { .attrs = format_attrs, }; -static const struct attribute_group event_group = { +static struct attribute_group event_group = { .name ="events" , - .attrs = hv_gpci_event_attrs, +/* .attrs is set in init */ };#define HV_CAPS_ATTR (_name, _format) \@@ -330,6 +330,7 @@ static int hv_gpci_init(void)int r;unsigned long hret;struct hv_perf_caps caps; +struct hv_gpci_request_buffer *arg;hv_gpci_assert_offsets_correct ();arch/powerpc/perf/hv-gpci.c static int hv_gpci_init(void) · line 363
Quoted 10 lines
arch/powerpc/perf/hv-gpci.c +7
-0@@ -353,6 +354,36 @@ static int hv_gpci_init(void)/* sampling not supported */ h_gpci_pmu.capabilities |=PERF_PMU_CAP_NO_INTERRUPT ; + arg = (void *)get_cpu_var (hv_gpci_reqb); +memset (arg,0 ,HGPCI_REQ_BUFFER_SIZE ); + +/* +* hcall H_GET_PERF_COUNTER_INFO populates the output +* counter_info_version value based on the system hypervisor. +* Pass the counter request 0x10 corresponds to request type ^ whichQuoted 45 lines
arch/powerpc/perf/hv-gpci.c +23
-0+* 'Dispatch_timebase_by_processor', to get the supported +* counter_info_version. +*/ + arg->params.counter_request =cpu_to_be32 (0x10 ); + + r =plpar_hcall_norets (H_GET_PERF_COUNTER_INFO , +virt_to_phys (arg),HGPCI_REQ_BUFFER_SIZE ); +if (r) { +pr_devel ("hcall failed, can't get supported counter_info_version: 0x%x\n" , r); + arg->params.counter_info_version_out =0x8 ; + } + +/* +* Use counter_info_version_out value to assign +* required hv-gpci event list. +*/ +if (arg->params.counter_info_version_out >=0x8 ) + event_group.attrs = hv_gpci_event_attrs; +else + event_group.attrs = hv_gpci_event_attrs_v6; + +put_cpu_var (hv_gpci_reqb); + r =perf_pmu_register (&h_gpci_pmu, h_gpci_pmu.name,-1 );if (r)return r;arch/powerpc/perf/hv-gpci.h +1
-0@@ -26,6 +26,7 @@ enum {#define REQUEST_FILE "../hv-gpci-requests.h"#define NAME_LOWER hv_gpci#define NAME_UPPER HV_GPCI +#define EVENT_ENABLE #include "req-gen/perf.h" #undef REQUEST_FILE#undef NAME_LOWERarch/powerpc/perf/req-gen/perf.h +0
-0@@ -139,6 +139,23 @@ PMU_EVENT_ATTR_STRING( \#define REQUEST_ (r_name, r_value, r_idx_1, r_fields) \ r_fieldsarch/powerpc/perf/req-gen/perf.h PMU_EVENT_ATTR_STRING( \ · line 150
Quoted 10 lines
arch/powerpc/perf/req-gen/perf.h +9
-0+/* Generate event list for platforms with counter_info_version 0x6 or below */ +static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = { +#include REQUEST_FILE +NULL +}; + +/* +* Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci +* events got deprecated for platforms firmware that supports Same wording as in the change log.
Quoted 13 lines
arch/powerpc/perf/req-gen/perf.h +8
-0+* counter_info_version 0x8 or above. +* Undefining macro EVENT_ENABLE, to disable the addition of deprecated +* events in "hv_gpci_event_attrs" attribute group, for platforms that +* supports counter_info_version 0x8 or above. +*/ +#undef EVENT_ENABLE + +/* Generate event list for platforms with counter_info_version 0x8 or above*/ static __maybe_unused struct attribute *hv_gpci_event_attrs[] = { #include REQUEST_FILE NULLSignature · 1 line
2.31.1cheers