A3700 USB UTMI PHY support

PATCH Applied Miquel Raynal 3 participants 11 messages Jan 29, 2019 – Feb 6, 2019

Subsystems (4)

Device tree bindings Generic PHY framework Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support Marvell armada 3700 PHY drivers

lore

Share & tools

lore

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #0 lore raw

v5 cover A3700 USB UTMI PHY support

USB2 on A3700 only works because U-Boot initializes the UTMI PHYs (one wired to each USB controller). While there is no issue with regular use, this architecture does not allow suspend to RAM to work as the PHYs must be re-initialized at resume. In order to support this feature, this series adds a UTMI PHY driver for the A3700 SoC.

The A3700 device tree is updated to reference the PHYs.

Thanks,
Miquèl

Changes since v4:
=================
* Drop USB patches as they have been sent in a separate series. No real functional changes since the v4 though, kind of a resend of the PHY patches from the "A3700 USB S2RAM support" series.

Changes since v3:
=================
* Bindings: as suggested by Gregory and Rob, used the "-misc" suffix instead of "-miscellaneous" and prefixed the compatible with "armada-3700" to follow what has been used for the other IPs of the same SoC (and added Rob's ack).

Changes since v2:
=================
* Typos
* UTMI PHY bindings:

Quoted 2 lines

New name for the USB2 host/PHY syscons (+ changes in the DT). Clearly state that the PHYs are different between OTG and

host-only controllers.
* UTMI PHY driver:

Quoted 6 lines

Use GENMASK macro.
Removed useless checks on driver data retrieval. Dropped the empty ->remove() hook.
Updated the licence macro to match the SPDX tag. Used the of_device_get_match_data() helper. Removed the use of a local variable in the ->probe() for the

driver's operations.

Quoted 1 line

Fixed the driver co-author: Igal, not Evan.

Changes since v1:
=================
* Add UTMI PHY driver/bindings/DT changes to bring S2RAM support to both USB ports available on the A3700 SoC.
* Rebased on top of v5.0-rc1.

Miquel Raynal (6):
phy: add A3700 UTMI PHY driver
dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
ARM64: dts: marvell: armada-37xx: fix USB2 memory region
ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

 .../bindings/phy/phy-mvebu-utmi.txt           |  38 +++
 MAINTAINERS                                   |   4 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |  34 ++-
 drivers/phy/marvell/Kconfig                   |   9 +
 drivers/phy/marvell/Makefile                  |   1 +
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c    | 278 ++++++++++++++++++
 6 files changed, 362 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c

Signature · 7 lines

2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #1 lore raw

PATCH v5 1/6 phy: add A3700 UTMI PHY driver

Marvell Armada 3700 SoC has two USB controllers, each of them being wired to an internal UTMI PHY. Add a driver to control them.

Igal Liberman worked on supporting the PHY, I took the while 'register configuration' from his work and rewrote almost entirely the driver/bindings around it.

Co-developed-by Igal Liberman <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Igal Liberman <[email protected]>

---
 drivers/phy/marvell/Kconfig                |   9 +
 drivers/phy/marvell/Makefile               |   1 +
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 278 +++++++++++++++++++++
 3 files changed, 288 insertions(+)
 create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c

drivers/phy/marvell/Kconfig +9 -0

index 9c90c0408ea3..b8e9dd38ad0d 100644
@@ -33,6 +33,15 @@ config PHY_MVEBU_A3700_COMPHY
 	  shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
 	  used by various controllers: Ethernet, SATA, USB3, PCIe.
 
+config PHY_MVEBU_A3700_UTMI
+	tristate "Marvell A3700 UTMI driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	default y
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell A3700 UTMI PHY driver.
+
 config PHY_MVEBU_CP110_COMPHY
 	tristate "Marvell CP110 comphy driver"
 	depends on ARCH_MVEBU || COMPILE_TEST

drivers/phy/marvell/Makefile +1 -0

index c13a0c8ab6f0..82f291cf59ee 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY)	+= phy-mvebu-a3700-comphy.o
+obj-$(CONFIG_PHY_MVEBU_A3700_UTMI)	+= phy-mvebu-a3700-utmi.o
 obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY)	+= phy-mvebu-cp110-comphy.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
 obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o

drivers/phy/marvell/phy-mvebu-a3700-utmi.c new file +278 -0

278 lines not on this page · raw message

Signature · 7 lines

2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #2 lore raw

PATCH v5 2/6 dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings

In reply to Miquel Raynal

Add bindings for Marvell Armada 3700 USB2 UTMI+ PHY.

Signed-off-by Miquel Raynal <[email protected]>

Reviewed-by Rob Herring <[email protected]>

---
 .../bindings/phy/phy-mvebu-utmi.txt           | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt

Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt new file +38 -0

new file mode 100644
index 000000000000..aa99ceec73b0
@@ -0,0 +1,38 @@
+MVEBU A3700 UTMI PHY
+--------------------
+
+USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 3700
+
+On Armada 3700, there are two USB controllers, one is compatible with the USB2
+and USB3 specifications and supports OTG. The other one is USB2 compliant and
+only supports host mode. Both of these controllers come with a slightly
+different UTMI PHY.
+
+Required Properties:
+
+- compatible: Should be one of:
+	      * "marvell,a3700-utmi-host-phy" for the PHY connected to
+	        the USB2 host-only controller.
+	      * "marvell,a3700-utmi-otg-phy" for the PHY connected to
+	        the USB3 and USB2 OTG capable controller.
+- reg: PHY IP register range.
+- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared
+			region covering registers related to both the host
+			controller and the PHY.
+- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0.
+
+
+Example:
+
+	usb2_utmi_host_phy: phy@5f000 {
+		compatible = "marvell,armada-3700-utmi-host-phy";
+		reg = <0x5f000 0x800>;
+		marvell,usb-misc-reg = <&usb2_syscon>;
+		#phy-cells = <0>;
+	};
+
+	usb2_syscon: system-controller@5f800 {
+		compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
+		reg = <0x5f800 0x800>;
+	};

Signature · 1 line

2.19.1

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #3 lore raw

PATCH v5 3/6 MAINTAINERS: phy: fill Armada 3700 PHY drivers entry

In reply to Miquel Raynal

Update the Armada 3700 PHY drivers entry with the recently added UTMI PHY driver.

Signed-off-by Miquel Raynal <[email protected]>

---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

MAINTAINERS +3 -1

index abfd80f21b24..2a08a097e107 100644
@@ -9080,11 +9080,13 @@ F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
 
-MARVELL ARMADA 3700 COMPHY DRIVER
+MARVELL ARMADA 3700 PHY DRIVERS
 M:	Miquel Raynal <[email protected]>
 S:	Maintained
 F:	drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+F:	drivers/phy/marvell/phy-mvebu-a3700-utmi.c
 F:	Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+F:	Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 
 MARVELL CRYPTO DRIVER
 M:	Boris Brezillon <[email protected]>

Signature · 1 line

2.19.1

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #4 lore raw

PATCH v5 4/6 ARM64: dts: marvell: armada-37xx: fix USB2 memory region

In reply to Miquel Raynal

The specification splits the USB2 memory region into three sections:
1/ 0xD005E000-0xD005EFFF: USB2 Host Controller Registers 2/ 0xD005F000-0xD005F7FF: USB2 UTMI PHY Registers
3/ 0xD005F800-0xD005FFFF: USB2 Host Miscellaneous Registers

Section 1/ belongs to the USB2 node but section 2/ belongs to the UTMI PHY node. Section 3/ can be accessed by both the USB controller and the PHY because of the miscaellaneous nature of the registers inside so a specific node will be created to cover the area and a handle to it will be added in both the USB controller and the PHY node.

Signed-off-by Miquel Raynal <[email protected]>

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +1 -1

index d6e548618a95..5cfd1b920f31 100644
@@ -351,7 +351,7 @@
 
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
-				reg = <0x5e000 0x2000>;
+				reg = <0x5e000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

Signature · 1 line

2.19.1

Gregory CLEMENT

maintainer Applied

2019-02-06 11:09 UTC #5 lore raw

Re: [PATCH v5 4/6] ARM64: dts: marvell: armada-37xx: fix USB2 memory region

Hi Miquel,

Quoted 5 lines · Miquel Raynal

The specification splits the USB2 memory region into three sections:
1/ 0xD005E000-0xD005EFFF: USB2 Host Controller Registers 2/ 0xD005F000-0xD005F7FF: USB2 UTMI PHY Registers
3/ 0xD005F800-0xD005FFFF: USB2 Host Miscellaneous Registers

Quoted 7 lines

Section 1/ belongs to the USB2 node but section 2/ belongs to the UTMI PHY node. Section 3/ can be accessed by both the USB controller and the PHY because of the miscaellaneous nature of the registers inside so a specific node will be created to cover the area and a handle to it will be added in both the USB controller and the PHY node.
Signed-off-by Miquel Raynal <[email protected]>

Applied to mvebu/dt64

Thanks,

Gregory

Quoted 25 lines

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +1 -1

index d6e548618a95..5cfd1b920f31 100644
@@ -351,7 +351,7 @@
 
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
-				reg = <0x5e000 0x2000>;
+				reg = <0x5e000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

Signature · 7 lines

2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Signature · 3 lines

Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #6 lore raw

PATCH v5 5/6 ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs

In reply to Miquel Raynal

On Marvell Armada 3700 SoCs there are two USB2 UTMI PHYs. They are both very similar but only one has OTG/charging capabilities.

Because there are USB host registers and PHY registers mixed in a single area, a system controller is also created and referenced from both the USB host node and the PHY node.

Signed-off-by Miquel Raynal <[email protected]>

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +28 -0

index 5cfd1b920f31..d2d8ef00c592 100644
@@ -344,18 +344,46 @@
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
 				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
 				status = "disabled";
 			};
 
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
 				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
 				reg = <0x60900 0x100>,

Signature · 1 line

2.19.1

Gregory CLEMENT

maintainer Applied

2019-02-06 11:10 UTC #7 lore raw

Re: [PATCH v5 5/6] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs

Hi Miquel,

Quoted 8 lines · Miquel Raynal

On Marvell Armada 3700 SoCs there are two USB2 UTMI PHYs. They are both very similar but only one has OTG/charging capabilities.
Because there are USB host registers and PHY registers mixed in a single area, a system controller is also created and referenced from both the USB host node and the PHY node.
Signed-off-by Miquel Raynal <[email protected]>

Applied to mvebu/dt64

Thanks,

Gregory

Quoted 63 lines

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +28 -0

index 5cfd1b920f31..d2d8ef00c592 100644
@@ -344,18 +344,46 @@
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
 				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
 				status = "disabled";
 			};
 
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
 				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
 				reg = <0x60900 0x100>,

Signature · 7 lines

2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Signature · 3 lines

Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Miquel Raynal

author maintainer

2019-01-29 09:36 UTC #8 lore raw

PATCH v5 6/6 ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

In reply to Miquel Raynal

Reference the PHY nodes from the USB controller nodes.

The USB3 host controller is wired to:
* the first PHY of the COMPHY IP
* the OTG-capable UTMI PHY

The USB2 host controller is wired to:
* the host-only UTMI PHY

Signed-off-by Miquel Raynal <[email protected]>

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +4 -0

index d2d8ef00c592..c0b1c9146525 100644
@@ -347,6 +347,8 @@
 				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
 				status = "disabled";
 			};

@@ -368,6 +370,8 @@
 				reg = <0x5e000 0x1000>;
 				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
 				status = "disabled";
 			};

Signature · 1 line

2.19.1

Gregory CLEMENT

maintainer Applied

2019-02-06 14:30 UTC #9 lore raw

Re: [PATCH v5 6/6] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

Hi Miquel,

Quoted 10 lines · Miquel Raynal

Reference the PHY nodes from the USB controller nodes.
The USB3 host controller is wired to:
* the first PHY of the COMPHY IP
* the OTG-capable UTMI PHY
The USB2 host controller is wired to:
* the host-only UTMI PHY
Signed-off-by Miquel Raynal <[email protected]>

Applied to mvebu/dt64

Thanks,

Gregory

Quoted 34 lines

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi +4 -0

index d2d8ef00c592..c0b1c9146525 100644
@@ -347,6 +347,8 @@
 				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
 				status = "disabled";
 			};

@@ -368,6 +370,8 @@
 				reg = <0x5e000 0x1000>;
 				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
 				status = "disabled";
 			};

Signature · 7 lines

2.19.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Signature · 3 lines

Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Kishon Vijay Abraham I

2019-02-06 11:34 UTC #10 lore raw

In reply to Miquel Raynal

Quoted 7 lines · Miquel Raynal

USB2 on A3700 only works because U-Boot initializes the UTMI PHYs (one wired to each USB controller). While there is no issue with regular use, this architecture does not allow suspend to RAM to work as the PHYs must be re-initialized at resume. In order to support this feature, this series adds a UTMI PHY driver for the A3700 SoC.
The A3700 device tree is updated to reference the PHYs.

merged the PHY patches.

Thanks
Kishon

Quoted 49 lines

Thanks,
Miquèl
Changes since v4:
=================
* Drop USB patches as they have been sent in a separate series. No real functional changes since the v4 though, kind of a resend of the PHY patches from the "A3700 USB S2RAM support" series.
Changes since v3:
=================
* Bindings: as suggested by Gregory and Rob, used the "-misc" suffix instead of "-miscellaneous" and prefixed the compatible with "armada-3700" to follow what has been used for the other IPs of the same SoC (and added Rob's ack).
Changes since v2:
=================
* Typos
* UTMI PHY bindings:
Quoted 2 lines
New name for the USB2 host/PHY syscons (+ changes in the DT). Clearly state that the PHYs are different between OTG and
host-only controllers.
* UTMI PHY driver:
Quoted 6 lines
Use GENMASK macro.
Removed useless checks on driver data retrieval. Dropped the empty ->remove() hook.
Updated the licence macro to match the SPDX tag. Used the of_device_get_match_data() helper. Removed the use of a local variable in the ->probe() for the
driver's operations.
Quoted 1 line
Fixed the driver co-author: Igal, not Evan.
Changes since v1:
=================
* Add UTMI PHY driver/bindings/DT changes to bring S2RAM support to both USB ports available on the A3700 SoC.
* Rebased on top of v5.0-rc1.
Miquel Raynal (6):
phy: add A3700 UTMI PHY driver
dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
ARM64: dts: marvell: armada-37xx: fix USB2 memory region
ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

Quoted 10 lines

 .../bindings/phy/phy-mvebu-utmi.txt           |  38 +++
 MAINTAINERS                                   |   4 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |  34 ++-
 drivers/phy/marvell/Kconfig                   |   9 +
 drivers/phy/marvell/Makefile                  |   1 +
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c    | 278 ++++++++++++++++++
 6 files changed, 362 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel