ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
Subsystems (2)
PATCH 1/1 ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
The Armada 388 GP Device Tree file describes two times a regulator named 'reg_usb2_1_vbus', with the exact same description. This has been wrong since Armada 388 GP support was introduced.
Fixes 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support")
Signed-off-by Thomas Petazzoni <[email protected]>
Cc <[email protected]> # v4.0+
--- arch/arm/boot/dts/armada-388-gp.dts | 10 ---------- 1 file changed, 10 deletions(-)
arch/arm/boot/dts/armada-388-gp.dts +0 -10
@@ -303,16 +303,6 @@ gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; - reg_usb2_1_vbus: v5-vbus1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; - }; - reg_sata0: pwr-sata0 { compatible = "regulator-fixed"; regulator-name = "pwr_en_sata0";
Signature · 1 line
2.6.3
PATCH 1/1 ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
Hi Thomas,
Quoted 7 lines · Thomas Petazzoni
The Armada 388 GP Device Tree file describes two times a regulator named '
reg_usb2_1_vbus', with the exact same description. This has been wrong since Armada 388 GP support was introduced.Fixes 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support")Signed-off-by Thomas Petazzoni <[email protected]>Cc <[email protected]> # v4.0+
Applied on mvebu/dt
Thanks,
Gregory
Quoted 28 lines
--- arch/arm/boot/dts/armada-388-gp.dts | 10 ---------- 1 file changed, 10 deletions(-)arch/arm/boot/dts/armada-388-gp.dts +0
-10@@ -303,16 +303,6 @@ gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; - reg_usb2_1_vbus: v5-vbus1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; - }; - reg_sata0: pwr-sata0 { compatible = "regulator-fixed"; regulator-name = "pwr_en_sata0";Signature · 1 line
2.6.3
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com