Skip to contentSkip to conversation

Bug - DP monitor does not get activated when snd_hda_intel is loaded

DISCUSSION Daniel Martin 2 participants 2 messages Mar 3, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

I'm having a bug here, where the loaded hda (snd_hda_intel) module causes some (timing?) problem resulting in a monitor connected to the DP not to get active. I can reproduce this on a Lenovo X201 and T410 (Ironlake) sitting on a docking station, which has a monitor (Dell U2410) connected to a DP.

First, I tried it on alsa-devel, but Takashi send me here. (This message has just marginally changed.)

Steps to reproduce:
1. boot with the laptop at the docking station and the monitor plugged in
2. start the X-Server
... output on LVDS and DP is okay
3. disable the DP: xrandr --output LVDS1 --preferred --output DP1 --off ... output on LVDS - okay
4. switch to DP: xrandr --output LVDS1 --off --output DP1 --preferred ... DP _usually_ doesn't gets active, it turns off into suspend state

If I boot a kernel without the hda module step 4 always works. When having the hda module loaded I need some luck and some iterations of step 3 and 4 to activate the monitor at the DP.

I verified that the problem exists in kernel v3.13.1 and v3.14-rc4.

The logs I have attached have been created on the T410 with kernel v3.14-rc4. The first alsa-info....txt has been created right after booting, the second one after step 4 failed. The kernel has been build with all alsa debug options I could find, the config is attached as well, and the kernel has been booted with drm.debug=0xe.

I hope that anyone can read something usefull - something that went wrong - out of the log files. My unexercised eye can't spot anything obvious.

If more logs are necessary, I'll send them.

Thanks,
Daniel Martin

PS: Should I open a fdo bug for drm/intel?

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx