Skip to contentSkip to conversation

Add radvd to the list of packages

PATCH New Amand Tihon 2 participants 4 messages Jan 28, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add radvd to the list of packages

Add radvd, the IPv6 router advertisement daemon.

---

Second try, I hope I got it right this time.
Still wondering about the installed binaries' names, hence the hack in $(RADVD_HOOK_POST_INSTALL). Any idea welcome.

 package/Config.in       |    1 +
 package/radvd/Config.in |    8 ++++++++
 package/radvd/S50radvd  |   18 ++++++++++++++++++
 package/radvd/radvd.mk  |   23 +++++++++++++++++++++++
 4 files changed, 50 insertions(+), 0 deletions(-)
package/Config.in +1 -0
index 29190b2..bb16015 100644
@@ -189,6 +189,7 @@ source "package/openvpn/Config.in"
 source "package/openswan/Config.in"
 source "package/portmap/Config.in"
 source "package/pppd/Config.in"
+source "package/radvd/Config.in"
 source "package/rp-pppoe/Config.in"
 source "package/pptp-linux/Config.in"
 source "package/proftpd/Config.in"
package/radvd/Config.in new file +8 -0
new file mode 100644
index 0000000..deadf7f
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_RADVD
+	bool "radvd"
+	select BR2_PACKAGE_FLEX
+	depends on BR2_INET_IPV6
+	help
+	  IPv6 Router Advertisement Daemon.
+	
+	  http://www.litech.org/radvd/
package/radvd/S50radvd new file +18 -0
new file mode 100755
index 0000000..d3e2cd1
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+RADVD=/usr/sbin/radvd
+
+echo "1" > /proc/sys/net/ipv6/conf/all/forwarding
+
+echo -n "Starting radvd: "
+if [ ! -x "${RADVD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${RADVD} ; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
package/radvd/radvd.mk new file +23 -0
new file mode 100644
index 0000000..b494df3
@@ -0,0 +1,23 @@
+#############################################################
+#
+# radvd
+#
+#############################################################
+RADVD_VERSION:=1.2
+RADVD_SOURCE:=radvd-$(RADVD_VERSION).tar.gz
+RADVD_SITE:=http://www.litech.org/radvd/dist/
+RADVD_AUTORECONF:=no
+RADVD_INSTALL_STAGING:=no
+RADVD_INSTALL_TARGET:=YES
+RADVD_DEPENDENCIES:=uclibc flex
+RADVD_MAKE:=$(MAKE1)
+
+$(eval $(call AUTOTARGETS,package,radvd))
+
+$(RADVD_HOOK_POST_INSTALL): $(RADVD_TARGET_INSTALL_TARGET)
+	mv $(TARGET_DIR)/usr/sbin/$(ARCH)-linux-radvd \
+		$(TARGET_DIR)/usr/sbin/radvd
+	mv $(TARGET_DIR)/usr/sbin/$(ARCH)-linux-radvdump \
+		$(TARGET_DIR)/usr/sbin/radvdump
+	$(INSTALL) -m 0755 package/radvd/S50radvd $(TARGET_DIR)/etc/init.d
+	touch $@
Signature · 10 lines
Amand Tihon
Rue du Ruchaux, 1 - 1490 Court-St-Etienne, Belgique
+32 479 207 743
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part.
Url : http://lists.busybox.net/pipermail/buildroot/attachments/20090128/ef650f26/attachment.pgp 
#1 lore raw

PATCH 1/1 Add radvd to the list of packages

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Amand" == Amand Tihon <[email protected]> writes:

Amand> Add radvd, the IPv6 router advertisement daemon. Amand> Signed-off-by: Amand Tihon <[email protected]> Amand> ---

Amand> Second try, I hope I got it right this time.

Yes, almost there ;)

Amand> --- /dev/null
Amand> +++ b/package/radvd/Config.in
Amand> @@ -0,0 +1,8 @@
Amand> +config BR2_PACKAGE_RADVD
Amand> + bool "radvd"
Amand> + select BR2_PACKAGE_FLEX
Amand> + depends on BR2_INET_IPV6
Amand> + help
Amand> + IPv6 Router Advertisement Daemon.
Amand> +

Trailing spaces here.

Amand> +++ b/package/radvd/radvd.mk
Amand> @@ -0,0 +1,23 @@
Amand> +############################################################# Amand> +#
Amand> +# radvd
Amand> +#
Amand> +############################################################# Amand> +RADVD_VERSION:=1.2
Amand> +RADVD_SOURCE:=radvd-$(RADVD_VERSION).tar.gz
Amand> +RADVD_SITE:=http://www.litech.org/radvd/dist/ Amand> +RADVD_AUTORECONF:=no
Amand> +RADVD_INSTALL_STAGING:=no
Amand> +RADVD_INSTALL_TARGET:=YES
Amand> +RADVD_DEPENDENCIES:=uclibc flex
Amand> +RADVD_MAKE:=$(MAKE1)
Amand> +
Amand> +$(eval $(call AUTOTARGETS,package,radvd))
Amand> +
Amand> +$(RADVD_HOOK_POST_INSTALL): $(RADVD_TARGET_INSTALL_TARGET)
Amand> + mv $(TARGET_DIR)/usr/sbin/$(ARCH)-linux-radvd \
Amand> + $(TARGET_DIR)/usr/sbin/radvd

I'm pretty sure you can get it to not prepend that to the binaries by passing --program-prefix='' in your RADVD_CONF_OPT

Other than that it looks good.

Signature · 1 line
Bye, Peter Korsgaard
#2 lore raw

PATCH 1/1 Add radvd to the list of packages

In reply to Amand Tihon

Add radvd, the IPv6 router advertisement daemon.

---

Never two without three... This one should make it :)

 package/Config.in       |    1 +
 package/radvd/Config.in |    8 ++++++++
 package/radvd/S50radvd  |   18 ++++++++++++++++++
 package/radvd/radvd.mk  |   20 ++++++++++++++++++++
 4 files changed, 47 insertions(+), 0 deletions(-)
package/Config.in +1 -0
index 29190b2..bb16015 100644
@@ -189,6 +189,7 @@ source "package/openvpn/Config.in"
 source "package/openswan/Config.in"
 source "package/portmap/Config.in"
 source "package/pppd/Config.in"
+source "package/radvd/Config.in"
 source "package/rp-pppoe/Config.in"
 source "package/pptp-linux/Config.in"
 source "package/proftpd/Config.in"
package/radvd/Config.in new file +8 -0
new file mode 100644
index 0000000..072aed4
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_RADVD
+	bool "radvd"
+	select BR2_PACKAGE_FLEX
+	depends on BR2_INET_IPV6
+	help
+	  IPv6 Router Advertisement Daemon.
+
+	  http://www.litech.org/radvd/
package/radvd/S50radvd new file +18 -0
new file mode 100755
index 0000000..d3e2cd1
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+RADVD=/usr/sbin/radvd
+
+echo "1" > /proc/sys/net/ipv6/conf/all/forwarding
+
+echo -n "Starting radvd: "
+if [ ! -x "${RADVD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${RADVD} ; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
package/radvd/radvd.mk new file +20 -0
new file mode 100644
index 0000000..268c26d
@@ -0,0 +1,20 @@
+#############################################################
+#
+# radvd
+#
+#############################################################
+RADVD_VERSION:=1.2
+RADVD_SOURCE:=radvd-$(RADVD_VERSION).tar.gz
+RADVD_SITE:=http://www.litech.org/radvd/dist/
+RADVD_AUTORECONF:=no
+RADVD_INSTALL_STAGING:=no
+RADVD_INSTALL_TARGET:=YES
+RADVD_DEPENDENCIES:=uclibc flex
+RADVD_MAKE:=$(MAKE1)
+RADVD_CONF_OPT:= --program-prefix=''
+
+$(eval $(call AUTOTARGETS,package,radvd))
+
+$(RADVD_HOOK_POST_INSTALL): $(RADVD_TARGET_INSTALL_TARGET)
+	$(INSTALL) -m 0755 package/radvd/S50radvd $(TARGET_DIR)/etc/init.d
+	touch $@
Signature · 10 lines
Amand Tihon
Rue du Ruchaux, 1 - 1490 Court-St-Etienne, Belgique
+32 479 207 743
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part.
Url : http://lists.busybox.net/pipermail/buildroot/attachments/20090128/7f1b4a01/attachment.pgp 
#3 lore raw

PATCH 1/1 Add radvd to the list of packages

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Amand" == Amand Tihon <[email protected]> writes:

Amand> Add radvd, the IPv6 router advertisement daemon. Amand> Signed-off-by: Amand Tihon <[email protected]>

Thanks, committed as r25107.

Signature · 1 line
Bye, Peter Korsgaard