Skip to contentSkip to conversation

Pull request for branch for-2011.08/bootloaders

GIT PULL New Thomas Petazzoni 5 participants 51 messages Jul 4, 2011 – Jul 7, 2011 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore
#0 lore raw

Hello,

We have a package infrastructure that allows to share a lot of common behaviour between packages, and allows to add new features easily to all existing packages (Git/Mercurial download support, or usage of an external source tree, etc.).

Unfortunately, some of the packages that would most benefit from those new infrastructure features are the bootloader and kernel, since it's typically the software components that have to be modified/tuned during the course of an embedded Linux project.

Therefore, this series converts all bootloaders makefiles and the kernel makefile to the package infrastructure, and adds the possibility of fetching the kernel and u-boot through Git (it can be added to other bootloaders with just a few lines of changes, mostly at the Config.in level).

It also does various other things :

* Integrate Allan Nielsen patch that allows package to override the default extract command. Allan wrote it for the ATI fglrx drivers, but this is also required by this patchset for the AT91Bootstrap bootloader, which is provided as a .zip file.

* Allow the kernel to be installed in /boot in the root filesystem. This is mostly useful for x86 and x86_64 systems, where it is traditional to have the kernel inside the root filesystem.

* Modify the way the kernel is configured, to always use a defconfig mechanism. This allows to make a silent oldconfig after linux.mk has tuned the kernel configuration according to various Buildroot configuration options (see the commit log for details).

* Modify the package infrastructure to provide a <pkg>_INSTALL_IMAGE knob in addition to <pkg>_INSTALL_STAGING and <pkg>_INSTALL_TARGET.

* Fix the patching procedure for host packages. It was incorrect, because it required the target package to exist even if only the host package was actually useful.

* Adds support for post-download hooks at the package infrastructure level. This is needed for the kernel, as the kernel requires to download a custom list of patches.

* Integrate Philippe Reynes patch that adds support for the x-loader first stage bootloader (for OMAP-based platforms).

The changes have already been tested sucessfully by Luca Ceresoli. Thanks to him for testing this patch set and for the feedback provided, as well as the bug fixes. Many, many thanks!

Changes since the last posting (May, 30th) :

- Made the option that allows to have the kernel installed in /boot available to all architectures, not only x86 and x86_64

- Fixed the package infrastructure modifications so that packages in subdirectories (such as package/multimedia/) continue to work properly.

- Add the x-loader bootloader, contributed by Philippe Reynes

- Bump Barebox version

Regards,

Thomas

The following changes since commit c80224a3a05e41af5a32e1c663fd3853f313382b:

toolchain/gcc: bump 4.6.x version to 4.6.1 (2011-06-28 15:19:13 +0200)

are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.08/bootloaders

Allan W. Nielsen (1):
Makefile.package.in: Makes it possible to override the default extract commands

Philippe Reynes (1):
Add x-loader bootloader

Thomas Petazzoni (26):
Fix quoting in default extract command
linux: make it possible to install the kernel in /boot
linux: use the defconfig mechanism after tuning the config
package: add infrastructure to install things in images/
package: fix patching procedure for host packages
barebox: use = instead of := and re-indent
barebox: convert to GENTARGETS
at91bootstrap: use = instead of := and indent properly
at91bootstrap: convert to GENTARGETS
at91dataflashboot: use = instead of := and indent
at91dataflashboot: convert to GENTARGETS
syslinux: convert to GENTARGETS
grub: convert to AUTOTARGETS
grub2: remove package
u-boot: convert to GENTARGETS
uboot-mkimage: new package
linux: rename LINUX26 to LINUX
linux: indent and align some definitions
package: add support for post-download hooks
linux: convert to the GENTARGETS infrastructure
boot: rename BR2_TARGET_* to BR2_BOOT_*
u-boot: rename options BR2_BOOT_UBOOT* to BR2_BOOT_U_BOOT* Improve TARGETS handling for bootloaders and kernel
linux: allow specification of a custom Git repository as a source
u-boot: allow specification of custom Git repo as source
barebox: bump version

 boot/Config.in                                     |    2 +-
 boot/at91bootstrap/Config.in                       |   18 +-
 boot/at91bootstrap/at91bootstrap.mk                |   69 ++----
 boot/at91dataflashboot/Config.in                   |   24 +--
 boot/at91dataflashboot/at91dataflashboot.mk        |   49 +---
 boot/barebox/Config.in                             |    8 +-
 boot/barebox/barebox.mk                            |   74 +++----
 boot/grub/Config.in                                |   94 ++++----
 boot/grub/grub.500-build-fix.patch                 |   14 ++
 boot/grub/grub.mk                                  |  157 +++++--------
 boot/grub2/Config.in                               |    9 -
 boot/grub2/grub2.mk                                |   93 --------
 boot/syslinux/Config.in                            |   16 +-
 boot/syslinux/syslinux.mk                          |   59 ++----
 boot/u-boot/Config.in                              |   89 ++++----
 boot/u-boot/u-boot.mk                              |  234 +++++++-------------
 boot/x-loader/Config.in                            |   15 ++
 boot/x-loader/x-loader.mk                          |   35 +++
 linux/Config.in                                    |   22 ++
 linux/linux.mk                                     |  210 +++++++++---------
 package/Makefile.package.in                        |   72 +++++--
 .../uboot-mkimage-2011.03-drop-configh.patch       |    0
 package/uboot-mkimage/uboot-mkimage.mk             |   16 ++
 23 files changed, 611 insertions(+), 768 deletions(-)
 create mode 100644 boot/grub/grub.500-build-fix.patch
 delete mode 100644 boot/grub2/Config.in
 delete mode 100644 boot/grub2/grub2.mk
 create mode 100644 boot/x-loader/Config.in
 create mode 100644 boot/x-loader/x-loader.mk
 rename boot/u-boot/u-boot-2011.03-drop-configh.patch => package/uboot-mkimage/uboot-mkimage-2011.03-drop-configh.patch (100%)
 create mode 100644 package/uboot-mkimage/uboot-mkimage.mk

Thanks,

Signature · 1 line
Thomas Petazzoni
#1 lore raw

PATCH 1/28 Makefile.package.in: Makes it possible to override the default extract commands

From: Allan W. Nielsen <[email protected]>

When using GENTARGETS (or macroes depending on it), there is no way of specifying a custom extraction procedure. When using the patch one can simply define $(PACKAGE_NAME)_EXTRACT_CMDS which will override the default. If non is defined it will fall back to the default extract procedure.

An example could look like this:

---
 package/Makefile.package.in |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)
package/Makefile.package.in +5 -2
index bf4e1b4..9949b58 100644
@@ -243,8 +243,7 @@ endif
 $(BUILD_DIR)/%/.stamp_extracted:
 	@$(call MESSAGE,"Extracting")
 	$(Q)mkdir -p $(@D)
-	$(Q)$(if $($(PKG)_SOURCE),$(INFLATE$(suffix $($(PKG)_SOURCE))) $(DL_DIR)/$($(PKG)_SOURCE) | \
-	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) -)
+	$($(PKG)_EXTRACT_CMDS)
 # some packages have messed up permissions inside
 	$(Q)chmod -R ug+rw $(@D)
 	$(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep))
@@ -425,6 +424,10 @@ $(2)_TARGET_UNINSTALL =		$$($(2)_DIR)/.stamp_uninstalled
 $(2)_TARGET_CLEAN =		$$($(2)_DIR)/.stamp_cleaned
 $(2)_TARGET_DIRCLEAN =		$$($(2)_DIR)/.stamp_dircleaned
 
+# default extract command
+$(2)_EXTRACT_CMDS ?= $(if $($(2)_SOURCE),$(INFLATE$(suffix $($(2)_SOURCE))) $(DL_DIR)/$($(2)_SOURCE) | \
+	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
+
 # post-steps hooks
 $(2)_POST_EXTRACT_HOOKS         ?=
 $(2)_POST_PATCH_HOOKS           ?=
Signature · 1 line
1.7.4.1
#2 lore raw

PATCH 1/28 Makefile.package.in: Makes it possible to override the default extract commands

Thomas, All,

Quoted 1 line · On Monday 04 July 2011 23:33:18 Thomas Petazzoni wrote:

From: Allan W. Nielsen <[email protected]>

Maybe add Allan to the CC: list?

Quoted 10 lines

When using GENTARGETS (or macroes depending on it), there is no way of specifying a custom extraction procedure. When using the patch one can simply define $(PACKAGE_NAME)_EXTRACT_CMDS which will override the default. If non is defined it will fall back to the default extract procedure.

An example could look like this:

---
 package/Makefile.package.in |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

[--SNIP--]

It seems the xample got lost in the mail. I can't check the repo, it's 403.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#3 lore raw

PATCH 1/28 Makefile.package.in: Makes it possible to override the default extract commands

Le Mon, 4 Jul 2011 23:45:17 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 4 lines · On Monday 04 July 2011 23:33:18 Thomas Petazzoni wrote:
Quoted 1 line

From: Allan W. Nielsen <[email protected]>

Maybe add Allan to the CC: list?

Fixed.

Quoted 6 lines
Quoted 6 lines

When using GENTARGETS (or macroes depending on it), there is no way of specifying a custom extraction procedure. When using the patch one can simply define $(PACKAGE_NAME)_EXTRACT_CMDS which will override the default. If non is defined it will fall back to the default extract procedure.

Quoted 7 lines
Quoted 4 lines

An example could look like this:

---
 package/Makefile.package.in |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

[--SNIP--]

It seems the xample got lost in the mail. I can't check the repo, it's 403.

Fixed!

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

PATCH 2/28 Fix quoting in default extract command

In reply to Thomas Petazzoni
---
 package/Makefile.package.in |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
package/Makefile.package.in +2 -1
index 9949b58..0a4c220 100644
@@ -425,7 +425,8 @@ $(2)_TARGET_CLEAN =		$$($(2)_DIR)/.stamp_cleaned
 $(2)_TARGET_DIRCLEAN =		$$($(2)_DIR)/.stamp_dircleaned
 
 # default extract command
-$(2)_EXTRACT_CMDS ?= $(if $($(2)_SOURCE),$(INFLATE$(suffix $($(2)_SOURCE))) $(DL_DIR)/$($(2)_SOURCE) | \
+$(2)_EXTRACT_CMDS ?= \
+	$$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
 	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
 # post-steps hooks
Signature · 1 line
1.7.4.1
#5 lore raw

PATCH 2/28 Fix quoting in default extract command

Thomas, All,

Quoted 1 line · On Monday 04 July 2011 23:33:19 Thomas Petazzoni wrote:
Quoted 19 lines
---
 package/Makefile.package.in |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
package/Makefile.package.in +2 -1
index 9949b58..0a4c220 100644
@@ -425,7 +425,8 @@ $(2)_TARGET_CLEAN =		$$($(2)_DIR)/.stamp_cleaned
 $(2)_TARGET_DIRCLEAN =		$$($(2)_DIR)/.stamp_dircleaned
 
 # default extract command
-$(2)_EXTRACT_CMDS ?= $(if $($(2)_SOURCE),$(INFLATE$(suffix $($(2)_SOURCE))) $(DL_DIR)/$($(2)_SOURCE) | \
+$(2)_EXTRACT_CMDS ?= \
+	$$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
 	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
 # post-steps hooks
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#6 lore raw

PATCH 3/28 linux: make it possible to install the kernel in /boot

In reply to Thomas Petazzoni
---
 linux/Config.in |    7 +++++++
 linux/linux.mk  |    3 +++
 2 files changed, 10 insertions(+), 0 deletions(-)
linux/Config.in +7 -0
index 1f1a69c..c9229a5 100644
@@ -153,6 +153,13 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
 	  Specify the kernel make target to build the kernel that you
 	  need.
 
+config BR2_LINUX_KERNEL_INSTALL_TARGET
+	bool "Install kernel image to /boot in target"
+	help
+	  Select this option to have the kernel image installed to
+	  /boot in the target root filesystem, as is typically done on
+	  x86/x86_64 systems.
+
 endif # BR2_LINUX_KERNEL
 
 endmenu
linux/linux.mk +3 -0
index 43ca87b..2bb32cb 100644
@@ -158,6 +158,9 @@ $(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/
 $(LINUX26_DIR)/.stamp_installed: $(LINUX26_DIR)/.stamp_compiled
 	@$(call MESSAGE,"Installing kernel")
 	cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
+ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
+	install -m 0644 -D $(LINUX26_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX26_IMAGE_NAME)
+endif
 	# Install modules and remove symbolic links pointing to build
 	# directories, not relevant on the target
 	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then 	\
Signature · 1 line
1.7.4.1
#7 lore raw

PATCH 3/28 linux: make it possible to install the kernel in /boot

Thomas, All,

Quoted 29 lines · On Monday 04 July 2011 23:33:20 Thomas Petazzoni wrote:
---
 linux/Config.in |    7 +++++++
 linux/linux.mk  |    3 +++
 2 files changed, 10 insertions(+), 0 deletions(-)
linux/Config.in +7 -0
index 1f1a69c..c9229a5 100644
@@ -153,6 +153,13 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
 	  Specify the kernel make target to build the kernel that you
 	  need.
 
+config BR2_LINUX_KERNEL_INSTALL_TARGET
+	bool "Install kernel image to /boot in target"
+	help
+	  Select this option to have the kernel image installed to
+	  /boot in the target root filesystem, as is typically done on
+	  x86/x86_64 systems.
+
 endif # BR2_LINUX_KERNEL
 
 endmenu
linux/linux.mk +0 -0
index 43ca87b..2bb32cb 100644

linux/linux.mk $(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/ · line 163

Quoted 6 lines
linux/linux.mk +3 -0
@@ -158,6 +158,9 @@ $(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/
 $(LINUX26_DIR)/.stamp_installed: $(LINUX26_DIR)/.stamp_compiled
 	@$(call MESSAGE,"Installing kernel")
 	cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
+ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
+	install -m 0644 -D $(LINUX26_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX26_IMAGE_NAME)
+endif

If we install the kernel in /boot, why do we stil install it in ${BINARIES_DIR} ?

It can only be confusing to have the kernel image in two places.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#8 lore raw

PATCH 3/28 linux: make it possible to install the kernel in /boot

Le Mon, 4 Jul 2011 23:48:43 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 2 lines

If we install the kernel in /boot, why do we stil install it in ${BINARIES_DIR} ?

Good idea, done.

I have also added a depends on !BR2_TARGET_ROOTFS_INITRAMFS on this option, because it wouldn't make sense to install the kernel in the root filesystem and have the root filesystem embedded inside the kernel image as an initramfs.

Cheers,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#9 lore raw

PATCH 3/28 linux: make it possible to install the kernel in /boot

In reply to Yann E. MORIN
Quoted 42 lines · Yann E. MORIN

Thomas, All,

Quoted 29 lines · On Monday 04 July 2011 23:33:20 Thomas Petazzoni wrote:
---
  linux/Config.in |    7 +++++++
  linux/linux.mk  |    3 +++
  2 files changed, 10 insertions(+), 0 deletions(-)
linux/Config.in +7 -0
index 1f1a69c..c9229a5 100644
@@ -153,6 +153,13 @@ config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
  	  Specify the kernel make target to build the kernel that you
  	  need.
 
+config BR2_LINUX_KERNEL_INSTALL_TARGET
+	bool "Install kernel image to /boot in target"
+	help
+	  Select this option to have the kernel image installed to
+	  /boot in the target root filesystem, as is typically done on
+	  x86/x86_64 systems.
+
  endif # BR2_LINUX_KERNEL
 
  endmenu
linux/linux.mk +0 -0
index 43ca87b..2bb32cb 100644

linux/linux.mk $(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/ · line 163

Quoted 6 lines
linux/linux.mk +3 -0
@@ -158,6 +158,9 @@ $(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/
  $(LINUX26_DIR)/.stamp_installed: $(LINUX26_DIR)/.stamp_compiled
  	@$(call MESSAGE,"Installing kernel")
  	cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
+ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
+	install -m 0644 -D $(LINUX26_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX26_IMAGE_NAME)
+endif

If we install the kernel in /boot, why do we stil install it in ${BINARIES_DIR} ?

Quoted 1 line

It can only be confusing to have the kernel image in two places.

Does this really hurt? I found that a handy _feature_ indeed.

Well, sorry for writing after v3 was submitted, but Thomas was so much faster than my review! :)

I need the kernel in the target for some products, but with v2 of Thomas' work I also was sure that I always have an uImage in output/images, ready for network boot via TFTP and other stuff.

Now I'd have to try both places, or script around the config to know where I'll find my uImage.

I'd rather come back to v2, but if you mind a few MB wasted on the development host, an additional option (say, "Copy kernel image to /images dir") would save both needs.

Luca

#10 lore raw

PATCH 3/28 linux: make it possible to install the kernel in /boot

Quoted 6 lines
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Luca" == Luca Ceresoli <[email protected]> writes:

If we install the kernel in /boot, why do we stil install it in ${BINARIES_DIR} ?

It can only be confusing to have the kernel image in two places.

Luca> Does this really hurt? I found that a handy _feature_ indeed.

Luca> Well, sorry for writing after v3 was submitted, but Thomas was so much Luca> faster than my review! :)

Luca> I need the kernel in the target for some products, but with v2 of Luca> Thomas' work I also was sure that I always have an uImage in Luca> output/images, ready for network boot via TFTP and other stuff.

Luca> Now I'd have to try both places, or script around the config to know Luca> where I'll find my uImage.

Ok, I'll make the copy-to-images unconditional when applying v3.

Signature · 1 line
Bye, Peter Korsgaard
#11 lore raw

PATCH 4/28 linux: use the defconfig mechanism after tuning the config

In reply to Thomas Petazzoni

Currently, the kernel configuration mechanism works as follows for custom configuration files:

* Copy the custom config file to buildroot_defconfig in the kernel tree
* Run "make buildroot_defconfig"
* Remove the buildroot_defconfig
* Tune the .config depending on some Buildroot options (EABI, MDEV, etc.)
* Run oldconfig

And for a defconfig-based configuration:

* Run "make XXX_defconfig"
* Tune the .config depending on some Buildroot options (EABI, MDEV, etc.)
* Run oldconfig

The problem is that the tuning done on the .config file can lead to have new options available for which no value has been set. Therefore, the "oldconfig" at the end of the process will hang the build process, waiting for the user to confirm what should be done.

Instead, we would like the kernel to automatically select the default value for those options.

Therefore, the configuration process when a configuration file is given is now the following one :

* Copy the custom config file to buildroot_defconfig in the kernel tree
* Tune the buildroot_defconfig depending on some Buildroot options (EABI, MDEV, etc.)
* Run "make buildroot_defconfig"
* Remove the buildroot_defconfig

And similarly, for defconfig-based configuration, the process is now the following one:

* Copy the defconfig file to buildroot_defconfig in the kernel tree
* Tune the buildroot_defconfig depending on some Buildroot options (EABI, MDEV, etc.)
* Run "make buildroot_defconfig"
* Remove the buildroot_defconfig

---
 linux/linux.mk |   40 ++++++++++++++++++++++++----------------
 1 files changed, 24 insertions(+), 16 deletions(-)
linux/linux.mk +24 -16
index 2bb32cb..d142ab2 100644
@@ -105,21 +105,28 @@ $(LINUX26_DIR)/.stamp_patched: $(LINUX26_DIR)/.stamp_extracted
 	done
 	$(Q)touch $@
 
+# As we are tweaking the kernel configuration file, we want to run a
+# silent oldconfig pass on the configuration file after having done
+# our tweaks. The normal 'oldconfig' target prompts the user for new
+# values that appeared, which hangs the build. Therefore, what we do
+# is that we create a new defconfig file called buildroot_defconfig,
+# which we tweak, and then use as the basis for the kernel
+# configuration. This temporary defconfig file is removed right after.
+KERNEL_DEFCONFIG_NAME = buildroot_defconfig
+KERNEL_DEFCONFIG_PATH = $(KERNEL_ARCH_PATH)/configs/$(KERNEL_DEFCONFIG_NAME)
 
 # Configuration
 $(LINUX26_DIR)/.stamp_configured: $(LINUX26_DIR)/.stamp_patched
 	@$(call MESSAGE,"Configuring kernel")
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
+	cp $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig $(KERNEL_DEFCONFIG_PATH)
 else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
-	cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) buildroot_defconfig
-	rm $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
+	cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_DEFCONFIG_PATH)
 endif
 ifeq ($(BR2_ARM_EABI),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
 else
-	$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config)
+	$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
 	# As the kernel gets compiled before root filesystems are
@@ -127,21 +134,22 @@ ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
 	# replaced later by the real list, and the kernel will be
 	# rebuilt using the linux26-rebuild-with-initramfs target.
 	touch $(BINARIES_DIR)/rootfs.initramfs
-	$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config)
-	$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(@D)/.config)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifneq ($(BR2_ROOTFS_DEVICE_CREATION_STATIC),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
-	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(@D)/.config)
+	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(KERNEL_DEFCONFIG_PATH))
 endif
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) oldconfig
+	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(KERNEL_DEFCONFIG_NAME)
+	rm $(KERNEL_DEFCONFIG_PATH)
 	$(Q)touch $@
 
 # Compilation. We make sure the kernel gets rebuilt when the
Signature · 1 line
1.7.4.1
#12 lore raw

PATCH 4/28 linux: use the defconfig mechanism after tuning the config

Thomas, All,

Quoted 2 lines · On Monday 04 July 2011 23:33:21 Thomas Petazzoni wrote:

Currently, the kernel configuration mechanism works as follows for custom configuration files:

[--SNIP--]

Quoted 2 lines

Therefore, the configuration process when a configuration file is given is now the following one :

[--SNIP--]

Quoted 1 line
Quoted 77 lines
---
 linux/linux.mk |   40 ++++++++++++++++++++++++----------------
 1 files changed, 24 insertions(+), 16 deletions(-)
linux/linux.mk +24 -16
index 2bb32cb..d142ab2 100644
@@ -105,21 +105,28 @@ $(LINUX26_DIR)/.stamp_patched: $(LINUX26_DIR)/.stamp_extracted
 	done
 	$(Q)touch $@
 
+# As we are tweaking the kernel configuration file, we want to run a
+# silent oldconfig pass on the configuration file after having done
+# our tweaks. The normal 'oldconfig' target prompts the user for new
+# values that appeared, which hangs the build. Therefore, what we do
+# is that we create a new defconfig file called buildroot_defconfig,
+# which we tweak, and then use as the basis for the kernel
+# configuration. This temporary defconfig file is removed right after.
+KERNEL_DEFCONFIG_NAME = buildroot_defconfig
+KERNEL_DEFCONFIG_PATH = $(KERNEL_ARCH_PATH)/configs/$(KERNEL_DEFCONFIG_NAME)
 
 # Configuration
 $(LINUX26_DIR)/.stamp_configured: $(LINUX26_DIR)/.stamp_patched
 	@$(call MESSAGE,"Configuring kernel")
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
+	cp $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig $(KERNEL_DEFCONFIG_PATH)
 else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
-	cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) buildroot_defconfig
-	rm $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
+	cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_DEFCONFIG_PATH)
 endif
 ifeq ($(BR2_ARM_EABI),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
 else
-	$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config)
+	$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
 	# As the kernel gets compiled before root filesystems are
@@ -127,21 +134,22 @@ ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
 	# replaced later by the real list, and the kernel will be
 	# rebuilt using the linux26-rebuild-with-initramfs target.
 	touch $(BINARIES_DIR)/rootfs.initramfs
-	$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config)
-	$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(@D)/.config)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifneq ($(BR2_ROOTFS_DEVICE_CREATION_STATIC),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.config)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(KERNEL_DEFCONFIG_PATH))
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(KERNEL_DEFCONFIG_PATH))
 endif
 ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
-	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(@D)/.config)
+	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(KERNEL_DEFCONFIG_PATH))
 endif
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) oldconfig
+	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(KERNEL_DEFCONFIG_NAME)
+	rm $(KERNEL_DEFCONFIG_PATH)
 	$(Q)touch $@
 
 # Compilation. We make sure the kernel gets rebuilt when the
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#13 lore raw

PATCH 5/28 package: add infrastructure to install things in images/

In reply to Thomas Petazzoni

This will allow the bootloader makefiles and the kernel makefile to rely on the GENTARGETS infrastructure.

---
 package/Makefile.package.in |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)
package/Makefile.package.in +19 -1
index 0a4c220..6126e6b 100644
@@ -304,6 +304,13 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
 	$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
 	$(Q)touch $@
 
+# Install to images dir
+$(BUILD_DIR)/%/.stamp_images_installed:
+	@$(call MESSAGE,'Installing to images directory')
+	$($(PKG)_INSTALL_IMAGES_CMDS)
+	$(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
+	$(Q)touch $@
+
 # Install to target dir
 $(BUILD_DIR)/%/.stamp_target_installed:
 	@$(call MESSAGE,"Installing to target")
@@ -408,12 +415,14 @@ endif
 
 $(2)_DEPENDENCIES		?=
 $(2)_INSTALL_STAGING		?= NO
+$(2)_INSTALL_IMAGES		?= NO
 $(2)_INSTALL_TARGET		?= YES
 $(2)_DIR_PREFIX			= $(if $(4),$(4),$(TOP_SRCDIR)/package)
 
 # define sub-target stamps
 $(2)_TARGET_INSTALL_TARGET =	$$($(2)_DIR)/.stamp_target_installed
 $(2)_TARGET_INSTALL_STAGING =	$$($(2)_DIR)/.stamp_staging_installed
+$(2)_TARGET_INSTALL_IMAGES =	$$($(2)_DIR)/.stamp_images_installed
 $(2)_TARGET_INSTALL_HOST =      $$($(2)_DIR)/.stamp_host_installed
 $(2)_TARGET_BUILD =		$$($(2)_DIR)/.stamp_built
 $(2)_TARGET_CONFIGURE =		$$($(2)_DIR)/.stamp_configured
@@ -438,6 +447,7 @@ $(2)_POST_BUILD_HOOKS           ?=
 $(2)_POST_INSTALL_HOOKS         ?=
 $(2)_POST_INSTALL_STAGING_HOOKS ?=
 $(2)_POST_INSTALL_TARGET_HOOKS  ?=
+$(2)_POST_INSTALL_IMAGES_HOOKS  ?=
 
 # human-friendly targets and target sequencing
 $(1):			$(1)-install
@@ -445,7 +455,7 @@ $(1):			$(1)-install
 ifeq ($$($(2)_TYPE),host)
 $(1)-install:	        $(1)-install-host
 else
-$(1)-install:		$(1)-install-staging $(1)-install-target
+$(1)-install:		$(1)-install-staging $(1)-install-target $(1)-install-images
 endif
 
 ifeq ($$($(2)_INSTALL_TARGET),YES)
@@ -462,6 +472,13 @@ else
 $(1)-install-staging:
 endif
 
+ifeq ($$($(2)_INSTALL_IMAGES),YES)
+$(1)-install-images:	$(1)-build \
+			$$($(2)_TARGET_INSTALL_IMAGES)
+else
+$(1)-install-images:
+endif
+
 $(1)-install-host:      $(1)-build $$($(2)_TARGET_INSTALL_HOST)
 
 $(1)-build:		$(1)-configure \
@@ -493,6 +510,7 @@ $(1)-dirclean:		$$($(2)_TARGET_DIRCLEAN)
 # uppercase package variable prefix
 $$($(2)_TARGET_INSTALL_TARGET):		PKG=$(2)
 $$($(2)_TARGET_INSTALL_STAGING):	PKG=$(2)
+$$($(2)_TARGET_INSTALL_IMAGES):		PKG=$(2)
 $$($(2)_TARGET_INSTALL_HOST):           PKG=$(2)
 $$($(2)_TARGET_BUILD):			PKG=$(2)
 $$($(2)_TARGET_CONFIGURE):		PKG=$(2)
Signature · 1 line
1.7.4.1
#14 lore raw

PATCH 6/28 package: fix patching procedure for host packages

In reply to Thomas Petazzoni

The patching procedure was using $($(NOHOSTPKG)_NAME) to find the name of the package without the host- prefix for host packages, which is needed to find the package directory and the prefix of the patches.

However, this $($(NOHOSTPKG)_NAME) variable is empty when there is only an host variant for the package and no target variant for it.

Therefore, instead of using this $($(NOHOSTPKG)_NAME) variable, we now use a new $(RAWNAME) variable, which is always the name of the package without the host- prefix, even for host packages.

---
 package/Makefile.package.in |   26 ++++++++++++--------------
 1 files changed, 12 insertions(+), 14 deletions(-)
package/Makefile.package.in +12 -14
index 6126e6b..cdcb5e5 100644
@@ -251,23 +251,21 @@ $(BUILD_DIR)/%/.stamp_extracted:
 
 # Patch
 #
-# The NOHOSTPKG variable is the uppercased package name, without the
-# HOST_ prefix, even for host packages. This allows to find the
-# patches in the package directory, because $($(NOHOSTPKG)_NAME)
-# expands to the package directory name.
-#
-$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $($(NOHOSTPKG)_NAME)-$($(PKG)_VERSION)
+# The RAWNAME variable is the lowercased package name, which allows to
+# find the package directory (typically package/<pkgname>) and the
+# prefix of the patches
+$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $(RAWNAME)-$($(PKG)_VERSION)
 $(BUILD_DIR)/%/.stamp_patched:
-	@$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$($(PKG)_NAME)")
+	@$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$(RAWNAME)")
 	$(if $($(PKG)_PATCH),toolchain/patch-kernel.sh $(@D) $(DL_DIR) $($(PKG)_PATCH))
 	$(Q)( \
-	if test -d $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME); then \
-	  if test "$(wildcard $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME)/$(NAMEVER)*.patch*)"; then \
-	    toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \
+	if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME); then \
+	  if test "$(wildcard $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER)*.patch*)"; then \
+	    toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \
 	  else \
-	    toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME) $($(NOHOSTPKG)_NAME)\*.patch $($(NOHOSTPKG)_NAME)\*.patch.$(ARCH) || exit 1; \
-	    if test -d $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME)/$(NAMEVER); then \
-	      toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \
+	    toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(RAWNAME)\*.patch $(RAWNAME)\*.patch.$(ARCH) || exit 1; \
+	    if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER); then \
+	      toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \
 	    fi; \
 	  fi; \
 	fi; \
@@ -515,7 +513,7 @@ $$($(2)_TARGET_INSTALL_HOST):           PKG=$(2)
 $$($(2)_TARGET_BUILD):			PKG=$(2)
 $$($(2)_TARGET_CONFIGURE):		PKG=$(2)
 $$($(2)_TARGET_PATCH):			PKG=$(2)
-$$($(2)_TARGET_PATCH):			NOHOSTPKG=$(3)
+$$($(2)_TARGET_PATCH):			RAWNAME=$(subst host-,,$(1))
 $$($(2)_TARGET_EXTRACT):		PKG=$(2)
 $$($(2)_TARGET_SOURCE):			PKG=$(2)
 $$($(2)_TARGET_UNINSTALL):		PKG=$(2)
Signature · 1 line
1.7.4.1
#15 lore raw

PATCH 6/28 package: fix patching procedure for host packages

Thomas, All,

Quoted 10 lines · On Monday 04 July 2011 23:33:23 Thomas Petazzoni wrote:

The patching procedure was using $($(NOHOSTPKG)_NAME) to find the name of the package without the host- prefix for host packages, which is needed to find the package directory and the prefix of the patches.

However, this $($(NOHOSTPKG)_NAME) variable is empty when there is only an host variant for the package and no target variant for it.

Therefore, instead of using this $($(NOHOSTPKG)_NAME) variable, we now use a new $(RAWNAME) variable, which is always the name of the package without the host- prefix, even for host packages.

[--SNIP--]

package/Makefile.package.in $$($(2)_TARGET_INSTALL_HOST): PKG=$(2) · line 516

Quoted 6 lines
package/Makefile.package.in +1 -1
@@ -515,7 +513,7 @@ $$($(2)_TARGET_INSTALL_HOST):           PKG=$(2)
 $$($(2)_TARGET_BUILD):			PKG=$(2)
 $$($(2)_TARGET_CONFIGURE):		PKG=$(2)
 $$($(2)_TARGET_PATCH):			PKG=$(2)
-$$($(2)_TARGET_PATCH):			NOHOSTPKG=$(3)
+$$($(2)_TARGET_PATCH):			RAWNAME=$(subst host-,,$(1))

I might say something stupid, but what abouta package that is named 'foohost-bar'? The 'host-' part will be stripped, and we'd get 'foobar'. And that'd be wrong, I think.

I'd use: $(patsubst host-%,%,$(1))

And even in that case, that does not prevent a target package that is named 'host-utils' from matching, and be renamed to just 'utils'.

But it's been a while I looked at the generic infra, so I might be just saying cracks here...

package/Makefile.package.in $$($(2)_TARGET_INSTALL_HOST): PKG=$(2) · line 519

Quoted 4 lines
package/Makefile.package.in +0 -0
 $$($(2)_TARGET_EXTRACT):		PKG=$(2)
 $$($(2)_TARGET_SOURCE):			PKG=$(2)
 $$($(2)_TARGET_UNINSTALL):		PKG=$(2)

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#16 lore raw

PATCH 6/28 package: fix patching procedure for host packages

Hello,

Le Tue, 5 Jul 2011 00:01:50 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 5 lines

I might say something stupid, but what abouta package that is named 'foohost-bar'? The 'host-' part will be stripped, and we'd get 'foobar'. And that'd be wrong, I think.

I'd use: $(patsubst host-%,%,$(1))

Ah, good idea, thanks! I've updated my patch with this.

Quoted 5 lines

And even in that case, that does not prevent a target package that is named 'host-utils' from matching, and be renamed to just 'utils'.

But it's been a while I looked at the generic infra, so I might be just saying cracks here...

I would say that we don't allow a package to have a name that starts with "host-". I think even without this patch, having such a package could cause troubles.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#17 lore raw

PATCH 7/28 barebox: use = instead of := and re-indent

In reply to Thomas Petazzoni
---
 boot/barebox/barebox.mk |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)
boot/barebox/barebox.mk +7 -6
index f3e769f..bab4b4e 100644
@@ -4,12 +4,13 @@
 #
 #############################################################
 
-BAREBOX_VERSION:=2011.05.0
-BAREBOX_SOURCE:=barebox-$(BAREBOX_VERSION).tar.bz2
-BAREBOX_SITE:=http://www.barebox.org/download/
-BAREBOX_DIR:=$(BUILD_DIR)/barebox-$(BAREBOX_VERSION)
-BAREBOX_CAT:=$(BZCAT)
-BAREBOX_BOARD_DEFCONFIG:=$(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
+BAREBOX_VERSION = 2011.05.0
+BAREBOX_SOURCE  = barebox-$(BAREBOX_VERSION).tar.bz2
+BAREBOX_SITE    = http://www.barebox.org/download/
+BAREBOX_DIR     = $(BUILD_DIR)/barebox-$(BAREBOX_VERSION)
+BAREBOX_CAT     = $(BZCAT)
+
+BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
 
 ifeq ($(KERNEL_ARCH),i386)
 BAREBOX_ARCH=x86
Signature · 1 line
1.7.4.1
#18 lore raw

PATCH 7/28 barebox: use = instead of := and re-indent

Thomas, All,

Quoted 1 line · On Monday 04 July 2011 23:33:24 Thomas Petazzoni wrote:

-BAREBOX_VERSION:=2011.05.0

[--SNIP--]

Quoted 1 line

+BAREBOX_VERSION = 2011.05.0

What is the rationale for using '=' instead of ':='?

Using '=' evaluates the assignemnt every time it is referenced, which can be a little bit costly when there are tons of them (like in buildroot); while using ':=' does the evaluation only once, at the time of the assignment, not evaluation.

I agree that the code should be homogeneous, but I'd think it should be fast as well. He, if I can get butter, buter's money, and a litle smile from the dairywoman! ;-)

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#19 lore raw

PATCH 7/28 barebox: use = instead of := and re-indent

Le Tue, 5 Jul 2011 00:08:38 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 1 line

What is the rationale for using '=' instead of ':='?

Consistency. And also because personally, I find = nicer to read than :=, but as you state below, it's true that the behaviour is not the same.

Quoted 8 lines

Using '=' evaluates the assignemnt every time it is referenced, which can be a little bit costly when there are tons of them (like in buildroot); while using ':=' does the evaluation only once, at the time of the assignment, not evaluation.

I agree that the code should be homogeneous, but I'd think it should be fast as well. He, if I can get butter, buter's money, and a litle smile from the dairywoman! ;-)

Then, we should state that those variables must all be defined with := all over the place and enforce this decision. In the mean time, I will drop those modifications from my patch set.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#20 lore raw

PATCH 7/28 barebox: use = instead of := and re-indent

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Hi,

Quoted 8 lines
Quoted 8 lines

Using '=' evaluates the assignemnt every time it is referenced, which can be a little bit costly when there are tons of them (like in buildroot); while using ':=' does the evaluation only once, at the time of the assignment, not evaluation.

I agree that the code should be homogeneous, but I'd think it should be fast as well. He, if I can get butter, buter's money, and a litle smile from the dairywoman! ;-)

Thomas> Then, we should state that those variables must all be defined with := Thomas> all over the place and enforce this decision. In the mean time, I will Thomas> drop those modifications from my patch set.

:= is only a performance advantage if variables are expensive to expand (use) and are used more than once - E.G. stuff involving $(shell) and similar, like the UPPERCASE macro we had calling tr.

= has a number of advantages though. As it only gets expanded at the last possible moment you don't have to take care about variable ordering, E.G. when you use a variable like LIBGLIB2_HOST_BINARY on another package, whereas with := you do. This can also be interesting when the variable contains $(shell) or other functions, as you might only want to execute them if/when they are needed, and not right away when the Makefiles are parsed.

I would prefer to use = by default, and only use := where it matters for correctness or performance.

Signature · 1 line
Bye, Peter Korsgaard
#21 lore raw

PATCH 8/28 barebox: convert to GENTARGETS

In reply to Thomas Petazzoni
---
 boot/barebox/barebox.mk |   59 +++++++++++++++++++++-------------------------
 1 files changed, 27 insertions(+), 32 deletions(-)
boot/barebox/barebox.mk +27 -32
index bab4b4e..4ed0389 100644
@@ -7,8 +7,11 @@
 BAREBOX_VERSION = 2011.05.0
 BAREBOX_SOURCE  = barebox-$(BAREBOX_VERSION).tar.bz2
 BAREBOX_SITE    = http://www.barebox.org/download/
-BAREBOX_DIR     = $(BUILD_DIR)/barebox-$(BAREBOX_VERSION)
-BAREBOX_CAT     = $(BZCAT)
+
+BAREBOX_INSTALL_IMAGES = YES
+ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+BAREBOX_INSTALL_TARGET = NO
+endif
 
 BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
 
@@ -22,41 +25,33 @@ endif
 
 BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)"
 
-$(DL_DIR)/$(BAREBOX_SOURCE):
-	 $(call DOWNLOAD,$(BAREBOX_SITE),$(BAREBOX_SOURCE))
-
-$(BAREBOX_DIR)/.unpacked: $(DL_DIR)/$(BAREBOX_SOURCE)
-	mkdir -p $(@D)
-	$(INFLATE$(suffix $(BAREBOX_SOURCE))) $(DL_DIR)/$(BAREBOX_SOURCE) \
-		| tar $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) -
-	touch $@
+define BAREBOX_CONFIGURE_CMDS
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
+endef
 
-$(BAREBOX_DIR)/.patched: $(BAREBOX_DIR)/.unpacked
-	toolchain/patch-kernel.sh $(BAREBOX_DIR) boot/barebox \
-		barebox-$(BAREBOX_VERSION)-\*.patch \
-		barebox-$(BAREBOX_VERSION)-\*.patch.$(ARCH)
-	touch $@
-
-$(BAREBOX_DIR)/.configured: $(BAREBOX_DIR)/.patched
-	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
-	touch $@
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_BUILD_BAREBOXENV_CMDS
+	$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
+		$(@D)/scripts/bareboxenv.c
+endef
+endif
 
-$(BAREBOX_DIR)/.built: $(BAREBOX_DIR)/.configured
-	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR)
-	touch $@
+define BAREBOX_BUILD_CMDS
+	$(BAREBOX_BUILD_BAREBOXENV_CMDS)
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D)
+endef
 
-$(BAREBOX_DIR)/.installed: $(BAREBOX_DIR)/.built
-	cp $(BAREBOX_DIR)/barebox.bin $(BINARIES_DIR)
-	touch $@
+define BAREBOX_INSTALL_IMAGES_CMDS
+	cp $(@D)/barebox.bin $(BINARIES_DIR)
+endef
 
-# bareboxenv for the target
-$(TARGET_DIR)/usr/bin/bareboxenv: $(BAREBOX_DIR)/.configured
-	mkdir -p $(@D)
-	$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $@ \
-		$(BAREBOX_DIR)/scripts/bareboxenv.c
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_INSTALL_TARGET_CMDS
+	cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
+endef
+endif
 
-barebox: $(BAREBOX_DIR)/.installed \
-	$(if $(BR2_TARGET_BAREBOX_BAREBOXENV),$(TARGET_DIR)/usr/bin/bareboxenv)
+$(eval $(call GENTARGETS,boot,barebox))
 
 ifeq ($(BR2_TARGET_BAREBOX),y)
 TARGETS+=barebox
Signature · 1 line
1.7.4.1
#22 lore raw

PATCH 9/28 at91bootstrap: use = instead of := and indent properly

In reply to Thomas Petazzoni
---
 boot/at91bootstrap/at91bootstrap.mk |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)
boot/at91bootstrap/at91bootstrap.mk +10 -10
index 3d4308e..052d1bd 100644
@@ -3,17 +3,17 @@
 # at91bootstrap
 #
 #############################################################
-AT91BOOTSTRAP_VERSION:=1.16
-AT91BOOTSTRAP_NAME:=AT91Bootstrap$(AT91BOOTSTRAP_VERSION)
-AT91BOOTSTRAP_SITE:=http://www.atmel.com/dyn/resources/prod_documents/
-AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).zip
-AT91BOOTSTRAP_DIR:=$(BUILD_DIR)/at91bootstrap-$(AT91BOOTSTRAP_VERSION)
+AT91BOOTSTRAP_VERSION = 1.16
+AT91BOOTSTRAP_NAME    = AT91Bootstrap$(AT91BOOTSTRAP_VERSION)
+AT91BOOTSTRAP_SITE    = http://www.atmel.com/dyn/resources/prod_documents/
+AT91BOOTSTRAP_SOURCE  = $(AT91BOOTSTRAP_NAME).zip
+AT91BOOTSTRAP_DIR     = $(BUILD_DIR)/at91bootstrap-$(AT91BOOTSTRAP_VERSION)
 
-AT91BOOTSTRAP_BOARD:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
-AT91BOOTSTRAP_BINARY:=$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
-AT91BOOTSTRAP_BUILD_DIR:=$(AT91BOOTSTRAP_DIR)/board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
-AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_BUILD_DIR)/$(AT91BOOTSTRAP_BINARY)
+AT91BOOTSTRAP_BOARD     = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY    = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_BINARY    = $(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
+AT91BOOTSTRAP_BUILD_DIR = $(AT91BOOTSTRAP_DIR)/board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
+AT91BOOTSTRAP_TARGET    = $(AT91BOOTSTRAP_BUILD_DIR)/$(AT91BOOTSTRAP_BINARY)
 
 $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
 	 $(call DOWNLOAD,$(AT91BOOTSTRAP_SITE),$(AT91BOOTSTRAP_SOURCE))
Signature · 1 line
1.7.4.1
#23 lore raw

PATCH 10/28 at91bootstrap: convert to GENTARGETS

In reply to Thomas Petazzoni
---
 boot/at91bootstrap/at91bootstrap.mk |   53 ++++++++++++-----------------------
 1 files changed, 18 insertions(+), 35 deletions(-)
boot/at91bootstrap/at91bootstrap.mk +18 -35
index 052d1bd..48fa4e0 100644
@@ -4,49 +4,32 @@
 #
 #############################################################
 AT91BOOTSTRAP_VERSION = 1.16
-AT91BOOTSTRAP_NAME    = AT91Bootstrap$(AT91BOOTSTRAP_VERSION)
 AT91BOOTSTRAP_SITE    = http://www.atmel.com/dyn/resources/prod_documents/
-AT91BOOTSTRAP_SOURCE  = $(AT91BOOTSTRAP_NAME).zip
-AT91BOOTSTRAP_DIR     = $(BUILD_DIR)/at91bootstrap-$(AT91BOOTSTRAP_VERSION)
+AT91BOOTSTRAP_SOURCE  = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
 
-AT91BOOTSTRAP_BOARD     = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY    = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
-AT91BOOTSTRAP_BINARY    = $(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
-AT91BOOTSTRAP_BUILD_DIR = $(AT91BOOTSTRAP_DIR)/board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
-AT91BOOTSTRAP_TARGET    = $(AT91BOOTSTRAP_BUILD_DIR)/$(AT91BOOTSTRAP_BINARY)
+AT91BOOTSTRAP_BOARD       = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY      = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_MAKE_SUBDIR = board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
+AT91BOOTSTRAP_BINARY      = $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
 
-$(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
-	 $(call DOWNLOAD,$(AT91BOOTSTRAP_SITE),$(AT91BOOTSTRAP_SOURCE))
+AT91BOOTSTRAP_INSTALL_IMAGES = YES
+AT91BOOTSTRAP_INSTALL_TARGET = NO
 
-$(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-	mkdir -p $(BUILD_DIR)
+define AT91BOOTSTRAP_EXTRACT_CMDS
 	unzip -d $(BUILD_DIR) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-	mv $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION) $(AT91BOOTSTRAP_DIR)
-	touch $@
+	mv $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)/* $(@D)
+	rmdir $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)
+endef
 
-$(AT91BOOTSTRAP_DIR)/.patched: $(AT91BOOTSTRAP_DIR)/.unpacked
-	toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) boot/at91bootstrap/ at91bootstrap-$(AT91BOOTSTRAP_VERSION)\*.patch
-	touch $@
+define AT91BOOTSTRAP_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
+endef
 
-$(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.patched
-	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) \
-		-C $(AT91BOOTSTRAP_BUILD_DIR)
+define AT91BOOTSTRAP_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(AT91BOOTSTRAP_BINARY) $(BINARIES_DIR)
+endef
 
-$(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY): $(AT91BOOTSTRAP_TARGET)
-	mkdir -p $(dir $@)
-	cp $^ $@
-
-at91bootstrap: $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-
-at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-
-at91bootstrap-unpacked: $(AT91BOOTSTRAP_DIR)/.unpacked
-
-at91bootstrap-clean:
-	make -C $(AT91BOOTSTRAP_BUILD_DIR) clean
-
-at91bootstrap-dirclean:
-	rm -rf $(AT91BOOTSTRAP_DIR)
+$(eval $(call GENTARGETS,boot,at91bootstrap))
 
 #############################################################
 #
Signature · 1 line
1.7.4.1
#24 lore raw

PATCH 11/28 at91dataflashboot: use = instead of := and indent

In reply to Thomas Petazzoni
---
 boot/at91dataflashboot/at91dataflashboot.mk |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)
boot/at91dataflashboot/at91dataflashboot.mk +6 -6
index 32591f7..f6e9b67 100644
@@ -3,12 +3,12 @@
 # DataFlashBoot
 #
 #############################################################
-DATAFLASHBOOT_VERSION:=1.05
-DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
-DATAFLASHBOOT_SITE:=ftp://www.at91.com/pub/buildroot/
-DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
-DATAFLASHBOOT_DIR:=$(BUILD_DIR)/at91dataflashboot-$(DATAFLASHBOOT_VERSION)
-DATAFLASHBOOT_BINARY:=$(DATAFLASHBOOT_NAME).bin
+DATAFLASHBOOT_VERSION = 1.05
+DATAFLASHBOOT_NAME    = DataflashBoot-$(DATAFLASHBOOT_VERSION)
+DATAFLASHBOOT_SITE    = ftp://www.at91.com/pub/buildroot/
+DATAFLASHBOOT_SOURCE  = $(DATAFLASHBOOT_NAME).tar.bz2
+DATAFLASHBOOT_DIR     = $(BUILD_DIR)/at91dataflashboot-$(DATAFLASHBOOT_VERSION)
+DATAFLASHBOOT_BINARY  = $(DATAFLASHBOOT_NAME).bin
 
 $(DL_DIR)/$(DATAFLASHBOOT_SOURCE):
 	 $(call DOWNLOAD,$(DATAFLASHBOOT_SITE),$(DATAFLASHBOOT_SOURCE))
Signature · 1 line
1.7.4.1
#25 lore raw

PATCH 12/28 at91dataflashboot: convert to GENTARGETS

In reply to Thomas Petazzoni

This commit converts the at91dataflashboot bootloader build process to GENTARGETS. It also does the following changes :

* As the package directory name is at91dataflashboot, the configuration options and make variables are renamed to AT91DATAFLASHBOOT instead of DATAFLASHBOOT.

* Since the board selection in Kconfig wasn't used anywhere, get rid of it. at91dataflashboot is only for AT91RM9200 apparently anyway.

---
 boot/at91dataflashboot/Config.in            |   24 +--------------
 boot/at91dataflashboot/at91dataflashboot.mk |   44 ++++++++------------------
 2 files changed, 15 insertions(+), 53 deletions(-)
boot/at91dataflashboot/Config.in +1 -23
index 25b9723..88cd058 100644
@@ -1,25 +1,3 @@
-menuconfig BR2_TARGET_DATAFLASHBOOT
+menuconfig BR2_TARGET_AT91DATAFLASHBOOT
        depends on BR2_arm
        bool "AT91 DataFlashBoot"
-
-if BR2_TARGET_DATAFLASHBOOT
-
-choice
-	prompt "Target Architecture"
-	default BR2_TARGET_DATAFLASHBOOT_AT91RM9200
-	help
-	  Select Chip for which Dataflash boot should be built
-	  Currently only AT91RM9200 Supported
-
-config BR2_TARGET_DATAFLASHBOOT_AT91RM9200
-	bool "AT91RM9200"
-
-config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261
-	bool "AT91SAM9261"
-
-config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261S
-	bool "AT91SAM9261S"
-
-endchoice
-
-endif # BR2_TARGET_DATAFLASHBOOT
boot/at91dataflashboot/at91dataflashboot.mk +14 -30

58 lines not on this page · raw message

Signature · 1 line
1.7.4.1
#26 lore raw

PATCH 13/28 syslinux: convert to GENTARGETS

In reply to Thomas Petazzoni

Moreover, the installation of pxelinux and/or isolinux is now selected to suboptions, as we traditionally do for other packages. This allows to have a single option (BR2_TARGET_SYSLINUX) that enables the syslinux package.

---
 boot/syslinux/Config.in   |   14 ++++++++----
 boot/syslinux/syslinux.mk |   50 +++++++++++++++-----------------------------
 2 files changed, 26 insertions(+), 38 deletions(-)
boot/syslinux/Config.in +9 -5
index 5650f91..60f3b8f 100644
@@ -5,8 +5,12 @@ config BR2_TARGET_SYSLINUX
 	  The syslinux bootloader for x86 systems.
 	  This includes: syslinux, pxelinux, extlinux.
 
-config BR2_TARGET_PXELINUX
-	bool "pxelinux"
-	depends on BR2_i386 || BR2_x86_64
-	help
-	  The pxelinux loader for x86 systems.
+config BR2_TARGET_SYSLINUX_ISOLINUX
+	bool "Install isolinux"
+	depends on BR2_TARGET_SYSLINUX
+	default y
+
+config BR2_TARGET_SYSLINUX_PXELINUX
+	bool "Install pxelinux"
+	depends on BR2_TARGET_SYSLINUX
+	default y
boot/syslinux/syslinux.mk +17 -33

65 lines not on this page · raw message

Signature · 1 line
1.7.4.1
#27 lore raw

PATCH 13/28 syslinux: convert to GENTARGETS

Thomas, All,

Quoted 4 lines · On Monday 04 July 2011 23:33:30 Thomas Petazzoni wrote:

Moreover, the installation of pxelinux and/or isolinux is now selected to suboptions, as we traditionally do for other packages. This allows to have a single option (BR2_TARGET_SYSLINUX) that enables the syslinux package.

You're doing two unrelated chances here:
- adding new options
- converting to GENTARGETS

In case something goes wrong, we would not know what of the two breaks.

Regards,
Yann E. MORIN.

PS. Yes, I'm in a review spree!
It can happen when my toolchians are building in the background! ;-)
YEM.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#28 lore raw

PATCH 13/28 syslinux: convert to GENTARGETS

Le Tue, 5 Jul 2011 00:12:31 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 3 lines

You're doing two unrelated chances here:
- adding new options
- converting to GENTARGETS

I'm not adding options, but organizing them differently, because it is needed to be able to do the GENTARGETS conversion.

Before, we add:

* an option to enable isolinux
* an option to enable pxelinux

But this isn't compatible with GENTARGETS because with GENTARGETS, we need a single option that enables/disables the package, and other options should be suboptions. Which is why we now have :

* an option to enable syslinux
* a suboption to enable isolinux
* a suboption to enable pxelinux

I could have done this option change *before* doing the GENTARGETS conversion, but honestly, I didn't want to mess up with the existing makefile code before converting it to GENTARGETS.

I also don't think it's a very major issue of having those two things squashed together into a single patch, so I'd like to keep it as it is if possible.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#29 lore raw

PATCH 13/28 syslinux: convert to GENTARGETS

Thomas, All,

Quoted 4 lines · On Tuesday 05 July 2011 21:46:02 Thomas Petazzoni wrote:

Le Tue, 5 Jul 2011 00:12:31 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 1 line

You're doing two unrelated chances here:

                                   ^

Hmmm... Maybe I should re-read myself before posting... :-]

Quoted 9 lines

Before, we add:

* an option to enable isolinux
* an option to enable pxelinux

But this isn't compatible with GENTARGETS because with GENTARGETS, we need a single option that enables/disables the package, and other options should be suboptions. Which is why we now have :

Quoted 7 lines

* an option to enable syslinux
* a suboption to enable isolinux
* a suboption to enable pxelinux

I could have done this option change *before* doing the GENTARGETS conversion, but honestly, I didn't want to mess up with the existing makefile code before converting it to GENTARGETS.

Granted. Doing both in one go is thus understandable.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#30 lore raw

PATCH 14/28 grub: convert to AUTOTARGETS

In reply to Thomas Petazzoni
---
 boot/grub/grub.500-build-fix.patch |   14 +++++
 boot/grub/grub.mk                  |  102 ++++++++++++++----------------------
 2 files changed, 53 insertions(+), 63 deletions(-)
 create mode 100644 boot/grub/grub.500-build-fix.patch
boot/grub/grub.500-build-fix.patch new file +14 -0
new file mode 100644
index 0000000..b096b7b
@@ -0,0 +1,14 @@
+--- grub-0.97.orig/netboot/main.c       2004-05-21 00:19:33.000000000 +0200
++++ grub-0.97/netboot/main.c    2007-07-20 02:31:28.000000000 +0200
+@@ -54,9 +54,9 @@
+ 
+ static int vendorext_isvalid;
+ static unsigned long netmask;
+-static struct bootpd_t bootp_data;
++struct bootpd_t bootp_data;
+ static unsigned long xid;
+-static unsigned char *end_of_rfc1533 = NULL;
++unsigned char *end_of_rfc1533 = NULL;
+
+ #ifndef        NO_DHCP_SUPPORT
+ #endif /* NO_DHCP_SUPPORT */
boot/grub/grub.mk +39 -63

131 lines not on this page · raw message

Signature · 1 line
1.7.4.1
#31 lore raw

PATCH 15/28 grub2: remove package

In reply to Thomas Petazzoni

Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it since then.

At that time, it was marked broken because the build process needed a Ruby interpreter available on the host, and it's really a pain that building a bootloader needs such a thing.

I've tried to upgrade the package to Grub2 1.99-rcX, and now it does not need a Ruby interpreter anymore, but instead requires a tool called "autogen", which itself needs the Guile Scheme interpreter.

Since we haven't heard any complaints about Grub2 being marked broken, and since it's such a pain to package, let's get rid of it. Of course, anybody interested in Grub2 is invited to contribute a working package.

---
 boot/Config.in       |    1 -
 boot/grub2/Config.in |    9 -----
 boot/grub2/grub2.mk  |   93 --------------------------------------------------
 3 files changed, 0 insertions(+), 103 deletions(-)
 delete mode 100644 boot/grub2/Config.in
 delete mode 100644 boot/grub2/grub2.mk
boot/Config.in +0 -1
index 6bcc98a..67ab8ac 100644
@@ -2,7 +2,6 @@ menu "Bootloaders"
 
 source "boot/barebox/Config.in"
 source "boot/grub/Config.in"
-source "boot/grub2/Config.in"
 source "boot/syslinux/Config.in"
 source "boot/u-boot/Config.in"
 source "boot/at91bootstrap/Config.in"
boot/grub2/Config.in deleted +0 -9
deleted file mode 100644
index 1301b5b..0000000
@@ -1,9 +0,0 @@
-config BR2_TARGET_GRUB2
-	bool "grub2"
-	# Only supports PC, Mac (Power, x86 and x86-64), Pegasos
-	depends on BR2_i386 || BR2_powerpc
-	# Build process is broken (./configure doesn't work, Ruby
-	# required, etc.)
-	depends on BROKEN
-	help
-	  The GRand Unified Bootloader for x86 systems, take #2.
boot/grub2/grub2.mk deleted +0 -93

93 lines not on this page · raw message

Signature · 1 line
1.7.4.1
#32 lore raw

PATCH 16/28 u-boot: convert to GENTARGETS

In reply to Thomas Petazzoni

The feature of building mkimage for the target is removed, it wasn't building with current U-Boot, and doesn't make a lot of sense (mkimage is needed only to prepare a kernel image, or an U-Boot script).

The feature of building mkimage for the host is moved to a proper package. It duplicates a few things (U-Boot URL, etc.) but it makes things a lot cleaner than having it handled by boot/u-boot/u-boot.mk.

---
 boot/u-boot/Config.in |    5 -
 boot/u-boot/u-boot.mk |  218 +++++++++++++++++--------------------------------
 2 files changed, 74 insertions(+), 149 deletions(-)
boot/u-boot/Config.in +0 -5
index 00a4a5f..aada346 100644
@@ -77,11 +77,6 @@ config BR2_TARGET_UBOOT_FORMAT_LDR
 
 endchoice
 
-config BR2_TARGET_UBOOT_TOOL_MKIMAGE
-	bool "mkimage tool in target"
-	help
-	  Install mkimage tool in target.
-
 config BR2_TARGET_UBOOT_TOOL_ENV
 	bool "fw_printenv tool in target"
 	help
boot/u-boot/u-boot.mk +74 -144

256 lines not on this page · raw message

Signature · 1 line
1.7.4.1
#33 lore raw

PATCH 17/28 uboot-mkimage: new package

In reply to Thomas Petazzoni

The mkimage for the host is now built by a package, so that boot/u-boot/u-boot.mk is no longer responsible for doing this. It makes things a lot easier to handle, as linux/linux.mk now simply depends on host-uboot-mkimage.

---
 linux/linux.mk                                     |    2 +-
 .../uboot-mkimage-2011.03-drop-configh.patch       |    0
 package/uboot-mkimage/uboot-mkimage.mk             |   16 ++++++++++++++++
 3 files changed, 17 insertions(+), 1 deletions(-)
 rename boot/u-boot/u-boot-2011.03-drop-configh.patch => package/uboot-mkimage/uboot-mkimage-2011.03-drop-configh.patch (100%)
 create mode 100644 package/uboot-mkimage/uboot-mkimage.mk
linux/linux.mk +1 -1
index d142ab2..a59a237 100644
@@ -40,7 +40,7 @@ LINUX26_IMAGE_NAME=vmImage
 else
 LINUX26_IMAGE_NAME=uImage
 endif
-LINUX26_DEPENDENCIES+=$(MKIMAGE)
+LINUX26_DEPENDENCIES+=host-uboot-mkimage
 else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
 LINUX26_IMAGE_NAME=bzImage
 else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
package/uboot-mkimage/uboot-mkimage-2011.03-drop-configh.patch renamed from boot/u-boot/u-boot-2011.03-drop-configh.patch +0 -0
similarity index 100%
rename from boot/u-boot/u-boot-2011.03-drop-configh.patch
rename to package/uboot-mkimage/uboot-mkimage-2011.03-drop-configh.patch
package/uboot-mkimage/uboot-mkimage.mk new file +16 -0
new file mode 100644
index 0000000..055348c
@@ -0,0 +1,16 @@
+UBOOT_MKIMAGE_VERSION = 2011.03
+UBOOT_MKIMAGE_SOURCE  = u-boot-$(UBOOT_MKIMAGE_VERSION).tar.bz2
+UBOOT_MKIMAGE_SITE    = ftp://ftp.denx.de/pub/u-boot
+
+define HOST_UBOOT_MKIMAGE_BUILD_CMDS
+	$(MAKE) -C $(@D) 			\
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH=$(U_BOOT_ARCH) 		\
+		tools
+endef
+
+define HOST_UBOOT_MKIMAGE_INSTALL_CMDS
+	install -m 0755 -D $(@D)/tools/mkimage $(HOST_DIR)/usr/bin
+endef
+
+$(eval $(call GENTARGETS,package,uboot-mkimage,host))
Signature · 1 line
1.7.4.1
#34 lore raw

PATCH 18/28 linux: rename LINUX26 to LINUX

In reply to Thomas Petazzoni
---
 linux/linux.mk |  108 ++++++++++++++++++++++++++++----------------------------
 1 files changed, 54 insertions(+), 54 deletions(-)
linux/linux.mk +54 -54
index a59a237..0aab92d 100644
@@ -3,22 +3,22 @@
 # Linux kernel 2.6 target
 #
 ###############################################################################
-LINUX26_VERSION=$(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
+LINUX_VERSION=$(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
 
-# Compute LINUX26_SOURCE and LINUX26_SITE from the configuration
-ifeq ($(LINUX26_VERSION),custom)
-LINUX26_TARBALL:=$(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
-LINUX26_SITE:=$(dir $(LINUX26_TARBALL))
-LINUX26_SOURCE:=$(notdir $(LINUX26_TARBALL))
+# Compute LINUX_SOURCE and LINUX_SITE from the configuration
+ifeq ($(LINUX_VERSION),custom)
+LINUX_TARBALL:=$(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
+LINUX_SITE:=$(dir $(LINUX_TARBALL))
+LINUX_SOURCE:=$(notdir $(LINUX_TARBALL))
 else
-LINUX26_SOURCE:=linux-$(LINUX26_VERSION).tar.bz2
-LINUX26_SITE:=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
+LINUX_SOURCE:=linux-$(LINUX_VERSION).tar.bz2
+LINUX_SITE:=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
 endif
 
-LINUX26_DIR:=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-LINUX26_PATCH=$(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
+LINUX_DIR:=$(BUILD_DIR)/linux-$(LINUX_VERSION)
+LINUX_PATCH=$(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
 
-LINUX26_MAKE_FLAGS = \
+LINUX_MAKE_FLAGS = \
 	HOSTCC="$(HOSTCC)" \
 	HOSTCFLAGS="$(HOSTCFLAGS)" \
 	ARCH=$(KERNEL_ARCH) \
@@ -28,27 +28,27 @@ LINUX26_MAKE_FLAGS = \
 
 # Get the real Linux version, which tells us where kernel modules are
 # going to be installed in the target filesystem.
-LINUX26_VERSION_PROBED = $(shell $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) --no-print-directory -s kernelrelease)
+LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
 
 ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
-LINUX26_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
+LINUX_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
 else
 ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
 ifeq ($(KERNEL_ARCH),blackfin)
 # a uImage, but with a different file name
-LINUX26_IMAGE_NAME=vmImage
+LINUX_IMAGE_NAME=vmImage
 else
-LINUX26_IMAGE_NAME=uImage
+LINUX_IMAGE_NAME=uImage
 endif
-LINUX26_DEPENDENCIES+=host-uboot-mkimage
+LINUX_DEPENDENCIES+=host-uboot-mkimage
 else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
-LINUX26_IMAGE_NAME=bzImage
+LINUX_IMAGE_NAME=bzImage
 else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
-LINUX26_IMAGE_NAME=zImage
+LINUX_IMAGE_NAME=zImage
 else ifeq ($(BR2_LINUX_KERNEL_VMLINUX_BIN),y)
-LINUX26_IMAGE_NAME=vmlinux.bin
+LINUX_IMAGE_NAME=vmlinux.bin
 else ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
-LINUX26_IMAGE_NAME=vmlinux
+LINUX_IMAGE_NAME=vmlinux
 endif
 endif
 
@@ -57,44 +57,44 @@ endif
 # for bzImage, arch/i386 and arch/x86_64 do not exist when copying the
 # defconfig file.
 ifeq ($(KERNEL_ARCH),i386)
-KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/x86
+KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/x86
 else ifeq ($(KERNEL_ARCH),x86_64)
-KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/x86
+KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/x86
 else
-KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/$(KERNEL_ARCH)
+KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/$(KERNEL_ARCH)
 endif
 
 ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
-LINUX26_IMAGE_PATH=$(LINUX26_DIR)/$(LINUX26_IMAGE_NAME)
+LINUX_IMAGE_PATH=$(LINUX_DIR)/$(LINUX_IMAGE_NAME)
 else
 ifeq ($(KERNEL_ARCH),avr32)
-LINUX26_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX26_IMAGE_NAME)
+LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
 else
-LINUX26_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX26_IMAGE_NAME)
+LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
 endif
 endif # BR2_LINUX_KERNEL_VMLINUX
 
 # Download
-$(LINUX26_DIR)/.stamp_downloaded:
+$(LINUX_DIR)/.stamp_downloaded:
 	@$(call MESSAGE,"Downloading kernel")
-	$(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-	$(foreach patch,$(filter ftp://% http://%,$(LINUX26_PATCH)),\
+	$(call DOWNLOAD,$(LINUX_SITE),$(LINUX_SOURCE))
+	$(foreach patch,$(filter ftp://% http://%,$(LINUX_PATCH)),\
 		$(call DOWNLOAD,$(dir $(patch)),$(notdir $(patch)))$(sep))
 	mkdir -p $(@D)
 	touch $@
 
 # Extraction
-$(LINUX26_DIR)/.stamp_extracted: $(LINUX26_DIR)/.stamp_downloaded
+$(LINUX_DIR)/.stamp_extracted: $(LINUX_DIR)/.stamp_downloaded
 	@$(call MESSAGE,"Extracting kernel")
 	mkdir -p $(@D)
-	$(Q)$(INFLATE$(suffix $(LINUX26_SOURCE))) $(DL_DIR)/$(LINUX26_SOURCE) | \
+	$(Q)$(INFLATE$(suffix $(LINUX_SOURCE))) $(DL_DIR)/$(LINUX_SOURCE) | \
 		tar -C $(@D) $(TAR_STRIP_COMPONENTS)=1 $(TAR_OPTIONS) -
 	$(Q)touch $@
 
 # Patch
-$(LINUX26_DIR)/.stamp_patched: $(LINUX26_DIR)/.stamp_extracted
+$(LINUX_DIR)/.stamp_patched: $(LINUX_DIR)/.stamp_extracted
 	@$(call MESSAGE,"Patching kernel")
-	for p in $(LINUX26_PATCH) ; do \
+	for p in $(LINUX_PATCH) ; do \
 		if echo $$p | grep -q -E "^ftp://|^http://" ; then \
 			toolchain/patch-kernel.sh $(@D) $(DL_DIR) `basename $$p` ; \
 		elif test -d $$p ; then \
@@ -116,7 +116,7 @@ KERNEL_DEFCONFIG_NAME = buildroot_defconfig
 KERNEL_DEFCONFIG_PATH = $(KERNEL_ARCH_PATH)/configs/$(KERNEL_DEFCONFIG_NAME)
 
 # Configuration
-$(LINUX26_DIR)/.stamp_configured: $(LINUX26_DIR)/.stamp_patched
+$(LINUX_DIR)/.stamp_configured: $(LINUX_DIR)/.stamp_patched
 	@$(call MESSAGE,"Configuring kernel")
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
 	cp $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig $(KERNEL_DEFCONFIG_PATH)
@@ -148,62 +148,62 @@ endif
 ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
 	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(KERNEL_DEFCONFIG_PATH))
 endif
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(KERNEL_DEFCONFIG_NAME)
+	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DEFCONFIG_NAME)
 	rm $(KERNEL_DEFCONFIG_PATH)
 	$(Q)touch $@
 
 # Compilation. We make sure the kernel gets rebuilt when the
 # configuration has changed.
-$(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/.config
+$(LINUX_DIR)/.stamp_compiled: $(LINUX_DIR)/.stamp_configured $(LINUX_DIR)/.config
 	@$(call MESSAGE,"Compiling kernel")
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) $(LINUX26_IMAGE_NAME)
-	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then 	\
-		$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) modules ;	\
+	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
+	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX_DIR)/.config) != 0 ] ; then 	\
+		$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ;	\
 	fi
 	$(Q)touch $@
 
 # Installation
-$(LINUX26_DIR)/.stamp_installed: $(LINUX26_DIR)/.stamp_compiled
+$(LINUX_DIR)/.stamp_installed: $(LINUX_DIR)/.stamp_compiled
 	@$(call MESSAGE,"Installing kernel")
-	cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
+	cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
 ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
-	install -m 0644 -D $(LINUX26_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX26_IMAGE_NAME)
+	install -m 0644 -D $(LINUX_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX_IMAGE_NAME)
 endif
 	# Install modules and remove symbolic links pointing to build
 	# directories, not relevant on the target
-	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then 	\
-		$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) 		\
+	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX_DIR)/.config) != 0 ] ; then 	\
+		$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) 		\
 			DEPMOD="$(HOST_DIR)/usr/sbin/depmod" modules_install ;		\
-		rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/build ;	\
-		rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/source ;	\
+		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ;	\
+		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ;	\
 	fi
 	$(Q)touch $@
 
-linux linux26: host-module-init-tools $(LINUX26_DEPENDENCIES) $(LINUX26_DIR)/.stamp_installed
+linux linux26: host-module-init-tools $(LINUX_DEPENDENCIES) $(LINUX_DIR)/.stamp_installed
 
-linux-menuconfig linux-xconfig linux-gconfig linux-nconfig linux26-menuconfig linux26-xconfig linux26-gconfig linux26-nconfig: dirs $(LINUX26_DIR)/.stamp_configured
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
+linux-menuconfig linux-xconfig linux-gconfig linux-nconfig linux26-menuconfig linux26-xconfig linux26-gconfig linux26-nconfig: dirs $(LINUX_DIR)/.stamp_configured
+	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
 		$(subst linux-,,$(subst linux26-,,$@))
 
 # Support for rebuilding the kernel after the initramfs file list has
 # been generated in $(BINARIES_DIR)/rootfs.initramfs.
-$(LINUX26_DIR)/.stamp_initramfs_rebuilt: $(LINUX26_DIR)/.stamp_installed $(BINARIES_DIR)/rootfs.initramfs
+$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_installed $(BINARIES_DIR)/rootfs.initramfs
 	@$(call MESSAGE,"Rebuilding kernel with initramfs")
 	# Remove the previously generated initramfs which was empty,
 	# to make sure the kernel will actually regenerate it.
 	$(RM) -f $(@D)/usr/initramfs_data.cpio*
 	# Build the kernel.
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) $(LINUX26_IMAGE_NAME)
+	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
 	# Copy the kernel image to its final destination
-	cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
+	cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
 	$(Q)touch $@
 
 # The initramfs building code must make sure this target gets called
 # after it generated the initramfs list of files.
-linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX26_DIR)/.stamp_initramfs_rebuilt
+linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX_DIR)/.stamp_initramfs_rebuilt
 
 ifeq ($(BR2_LINUX_KERNEL),y)
-TARGETS+=linux26
+TARGETS+=linux
 endif
 
 # Checks to give errors that the user can understand
Signature · 1 line
1.7.4.1
#36 lore raw

PATCH 18/28 linux: rename LINUX26 to LINUX

Le Tue, 5 Jul 2011 16:24:00 +0200,
"Dechesne, Nicolas" <[email protected]> a ?crit :

Quoted 5 lines
Quoted 3 lines

# Linux kernel 2.6 target
#

you probably missed this instance of '2.6', granted it's a comment ;-)

Right, fixed! Thanks Nicolas.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#37 lore raw

PATCH 19/28 linux: indent and align some definitions

In reply to Thomas Petazzoni
---
 linux/linux.mk |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)
linux/linux.mk +7 -7
index 0aab92d..eea84b5 100644
@@ -7,16 +7,16 @@ LINUX_VERSION=$(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
 
 # Compute LINUX_SOURCE and LINUX_SITE from the configuration
 ifeq ($(LINUX_VERSION),custom)
-LINUX_TARBALL:=$(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
-LINUX_SITE:=$(dir $(LINUX_TARBALL))
-LINUX_SOURCE:=$(notdir $(LINUX_TARBALL))
+LINUX_TARBALL = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
+LINUX_SITE    = $(dir $(LINUX_TARBALL))
+LINUX_SOURCE  = $(notdir $(LINUX_TARBALL))
 else
-LINUX_SOURCE:=linux-$(LINUX_VERSION).tar.bz2
-LINUX_SITE:=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
+LINUX_SOURCE  = linux-$(LINUX_VERSION).tar.bz2
+LINUX_SITE    = $(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
 endif
 
-LINUX_DIR:=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_PATCH=$(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
+LINUX_DIR     = $(BUILD_DIR)/linux-$(LINUX_VERSION)
+LINUX_PATCH   = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
 
 LINUX_MAKE_FLAGS = \
 	HOSTCC="$(HOSTCC)" \
Signature · 1 line
1.7.4.1
#38 lore raw

PATCH 20/28 package: add support for post-download hooks

In reply to Thomas Petazzoni

This will be needed for the Linux kernel package, which needs to download patches in a custom way.

---
 package/Makefile.package.in |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
package/Makefile.package.in +2 -0
index cdcb5e5..ff0fd9f 100644
@@ -234,6 +234,7 @@ ifeq ($(DL_MODE),DOWNLOAD)
 endif
 	$(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_SOURCE)))
 	$(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_PATCH)))
+	$(foreach hook,$($(PKG)_POST_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
 ifeq ($(DL_MODE),DOWNLOAD)
 	$(Q)mkdir -p $(@D)
 	$(Q)touch $@
@@ -437,6 +438,7 @@ $(2)_EXTRACT_CMDS ?= \
 	$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
 
 # post-steps hooks
+$(2)_POST_DOWNLOAD_HOOKS        ?=
 $(2)_POST_EXTRACT_HOOKS         ?=
 $(2)_POST_PATCH_HOOKS           ?=
 $(2)_PRE_CONFIGURE_HOOKS        ?=
Signature · 1 line
1.7.4.1
#39 lore raw

PATCH 21/28 linux: convert to the GENTARGETS infrastructure

In reply to Thomas Petazzoni
---
 linux/linux.mk |  111 +++++++++++++++++++++++++++-----------------------------
 1 files changed, 53 insertions(+), 58 deletions(-)
linux/linux.mk +53 -58
index eea84b5..0753fac 100644
@@ -15,8 +15,10 @@ LINUX_SOURCE  = linux-$(LINUX_VERSION).tar.bz2
 LINUX_SITE    = $(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
 endif
 
-LINUX_DIR     = $(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_PATCH   = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
+LINUX_PATCHES   = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
+
+LINUX_INSTALL_IMAGES = YES
+LINUX_DEPENDENCIES  += host-module-init-tools
 
 LINUX_MAKE_FLAGS = \
 	HOSTCC="$(HOSTCC)" \
@@ -74,27 +76,17 @@ LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
 endif
 endif # BR2_LINUX_KERNEL_VMLINUX
 
-# Download
-$(LINUX_DIR)/.stamp_downloaded:
-	@$(call MESSAGE,"Downloading kernel")
-	$(call DOWNLOAD,$(LINUX_SITE),$(LINUX_SOURCE))
-	$(foreach patch,$(filter ftp://% http://%,$(LINUX_PATCH)),\
+define LINUX_DOWNLOAD_PATCHES
+	$(if $(LINUX_PATCHES),
+		@$(call MESSAGE,"Download additional patches"))
+	$(foreach patch,$(filter ftp://% http://%,$(LINUX_PATCHES)),\
 		$(call DOWNLOAD,$(dir $(patch)),$(notdir $(patch)))$(sep))
-	mkdir -p $(@D)
-	touch $@
-
-# Extraction
-$(LINUX_DIR)/.stamp_extracted: $(LINUX_DIR)/.stamp_downloaded
-	@$(call MESSAGE,"Extracting kernel")
-	mkdir -p $(@D)
-	$(Q)$(INFLATE$(suffix $(LINUX_SOURCE))) $(DL_DIR)/$(LINUX_SOURCE) | \
-		tar -C $(@D) $(TAR_STRIP_COMPONENTS)=1 $(TAR_OPTIONS) -
-	$(Q)touch $@
+endef
+
+LINUX_POST_DOWNLOAD_HOOKS += LINUX_DOWNLOAD_PATCHES
 
-# Patch
-$(LINUX_DIR)/.stamp_patched: $(LINUX_DIR)/.stamp_extracted
-	@$(call MESSAGE,"Patching kernel")
-	for p in $(LINUX_PATCH) ; do \
+define LINUX_APPLY_PATCHES
+	for p in $(LINUX_PATCHES) ; do \
 		if echo $$p | grep -q -E "^ftp://|^http://" ; then \
 			toolchain/patch-kernel.sh $(@D) $(DL_DIR) `basename $$p` ; \
 		elif test -d $$p ; then \
@@ -103,7 +95,9 @@ $(LINUX_DIR)/.stamp_patched: $(LINUX_DIR)/.stamp_extracted
 			toolchain/patch-kernel.sh $(@D) `dirname $$p` `basename $$p` ; \
 		fi \
 	done
-	$(Q)touch $@
+endef
+
+LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
 
 # As we are tweaking the kernel configuration file, we want to run a
 # silent oldconfig pass on the configuration file after having done
@@ -115,60 +109,59 @@ $(LINUX_DIR)/.stamp_patched: $(LINUX_DIR)/.stamp_extracted
 KERNEL_DEFCONFIG_NAME = buildroot_defconfig
 KERNEL_DEFCONFIG_PATH = $(KERNEL_ARCH_PATH)/configs/$(KERNEL_DEFCONFIG_NAME)
 
-# Configuration
-$(LINUX_DIR)/.stamp_configured: $(LINUX_DIR)/.stamp_patched
-	@$(call MESSAGE,"Configuring kernel")
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
-	cp $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig $(KERNEL_DEFCONFIG_PATH)
+KERNEL_SOURCE_CONFIG = $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
 else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
-	cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_DEFCONFIG_PATH)
+KERNEL_SOURCE_CONFIG = $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
 endif
-ifeq ($(BR2_ARM_EABI),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
-else
-	$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH))
-endif
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
+
+define LINUX_CONFIGURE_CMDS
+	cp $(KERNEL_SOURCE_CONFIG) $(KERNEL_DEFCONFIG_PATH)
+	$(if $(BR2_ARM_EABI),
+		$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH)),
+		$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(KERNEL_DEFCONFIG_PATH)))
 	# As the kernel gets compiled before root filesystems are
 	# built, we create a fake initramfs file list. It'll be
 	# replaced later by the real list, and the kernel will be
 	# rebuilt using the linux26-rebuild-with-initramfs target.
-	touch $(BINARIES_DIR)/rootfs.initramfs
-	$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(KERNEL_DEFCONFIG_PATH))
-endif
-ifneq ($(BR2_ROOTFS_DEVICE_CREATION_STATIC),y)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(KERNEL_DEFCONFIG_PATH))
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(KERNEL_DEFCONFIG_PATH))
-endif
-ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
-	$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(KERNEL_DEFCONFIG_PATH))
-endif
+	$(if $(BR2_TARGET_ROOTFS_INITRAMFS),
+		touch $(BINARIES_DIR)/rootfs.initramfs
+		$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(KERNEL_DEFCONFIG_PATH)))
+	$(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
+		$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(KERNEL_DEFCONFIG_PATH))
+		$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(KERNEL_DEFCONFIG_PATH)))
+	$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),
+		$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(KERNEL_DEFCONFIG_PATH)))
 	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DEFCONFIG_NAME)
 	rm $(KERNEL_DEFCONFIG_PATH)
-	$(Q)touch $@
+endef
 
 # Compilation. We make sure the kernel gets rebuilt when the
 # configuration has changed.
-$(LINUX_DIR)/.stamp_compiled: $(LINUX_DIR)/.stamp_configured $(LINUX_DIR)/.config
-	@$(call MESSAGE,"Compiling kernel")
+define LINUX_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
 	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX_DIR)/.config) != 0 ] ; then 	\
 		$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ;	\
 	fi
-	$(Q)touch $@
+endef
 
-# Installation
-$(LINUX_DIR)/.stamp_installed: $(LINUX_DIR)/.stamp_compiled
-	@$(call MESSAGE,"Installing kernel")
+define LINUX_INSTALL_IMAGES_CMDS
 	cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
+endef
+
 ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
+define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
 	install -m 0644 -D $(LINUX_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX_IMAGE_NAME)
+endef
 endif
+
+define LINUX_INSTALL_TARGET_CMDS
+	$(LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET)
 	# Install modules and remove symbolic links pointing to build
 	# directories, not relevant on the target
 	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX_DIR)/.config) != 0 ] ; then 	\
@@ -177,17 +170,18 @@ endif
 		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ;	\
 		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ;	\
 	fi
-	$(Q)touch $@
+endef
 
-linux linux26: host-module-init-tools $(LINUX_DEPENDENCIES) $(LINUX_DIR)/.stamp_installed
+$(eval $(call GENTARGETS,,linux))
 
 linux-menuconfig linux-xconfig linux-gconfig linux-nconfig linux26-menuconfig linux26-xconfig linux26-gconfig linux26-nconfig: dirs $(LINUX_DIR)/.stamp_configured
 	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
 		$(subst linux-,,$(subst linux26-,,$@))
+	rm -f $(LINUX_DIR)/.stamp_{built,target_installed,images_installed}
 
 # Support for rebuilding the kernel after the initramfs file list has
 # been generated in $(BINARIES_DIR)/rootfs.initramfs.
-$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_installed $(BINARIES_DIR)/rootfs.initramfs
+$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.initramfs
 	@$(call MESSAGE,"Rebuilding kernel with initramfs")
 	# Remove the previously generated initramfs which was empty,
 	# to make sure the kernel will actually regenerate it.
@@ -202,6 +196,7 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_installed $(BINARIES_
 # after it generated the initramfs list of files.
 linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX_DIR)/.stamp_initramfs_rebuilt
 
+
 ifeq ($(BR2_LINUX_KERNEL),y)
 TARGETS+=linux
 endif
Signature · 1 line
1.7.4.1
#40 lore raw

PATCH 22/28 boot: rename BR2_TARGET_* to BR2_BOOT_*

In reply to Thomas Petazzoni
---
 boot/at91bootstrap/Config.in                |   18 +++---
 boot/at91bootstrap/at91bootstrap.mk         |    8 +-
 boot/at91dataflashboot/Config.in            |    2 +-
 boot/at91dataflashboot/at91dataflashboot.mk |    2 +-
 boot/barebox/Config.in                      |    8 +-
 boot/barebox/barebox.mk                     |   12 ++--
 boot/grub/Config.in                         |   94 +++++++++++++-------------
 boot/grub/grub.mk                           |   50 +++++++-------
 boot/syslinux/Config.in                     |   10 ++--
 boot/syslinux/syslinux.mk                   |    6 +-
 boot/u-boot/Config.in                       |   70 ++++++++++----------
 boot/u-boot/u-boot.mk                       |   34 +++++-----
 12 files changed, 157 insertions(+), 157 deletions(-)
boot/at91bootstrap/Config.in +9 -9
index f022dd5..26af93a 100644
@@ -1,4 +1,4 @@
-menuconfig BR2_TARGET_AT91BOOTSTRAP
+menuconfig BR2_BOOT_AT91BOOTSTRAP
 	depends on BR2_arm
 	bool "AT91 Bootstrap"
 	help
@@ -8,9 +8,9 @@ menuconfig BR2_TARGET_AT91BOOTSTRAP
 	  - Peripheral drivers such as PIO, PMC or SDRAMC...
 	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
 
-if	BR2_TARGET_AT91BOOTSTRAP
+if	BR2_BOOT_AT91BOOTSTRAP
 
-config BR2_TARGET_AT91BOOTSTRAP_BOARD
+config BR2_BOOT_AT91BOOTSTRAP_BOARD
 	string "Bootstrap board"
 	default ""
 	help
@@ -18,22 +18,22 @@ config BR2_TARGET_AT91BOOTSTRAP_BOARD
 
 choice
 	prompt "Boot Memory"
-	default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	default BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
 	help
 	  Select Chip for which AT91 bootstrap should be built
 
-config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+config BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
 	bool "Data Flash"
 
-config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+config BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
 	bool "NAND Flash"
 
 endchoice
 
-config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+config BR2_BOOT_AT91BOOTSTRAP_MEMORY
 	string
-	default	"dataflash"	if	BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
-	default	"nandflash"	if	BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+	default	"dataflash"	if	BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
+	default	"nandflash"	if	BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
 
 endif
 
boot/at91bootstrap/at91bootstrap.mk +4 -4
index 48fa4e0..58d547d 100644
@@ -7,8 +7,8 @@ AT91BOOTSTRAP_VERSION = 1.16
 AT91BOOTSTRAP_SITE    = http://www.atmel.com/dyn/resources/prod_documents/
 AT91BOOTSTRAP_SOURCE  = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
 
-AT91BOOTSTRAP_BOARD       = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY      = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_BOARD       = $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY      = $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_MEMORY))
 AT91BOOTSTRAP_MAKE_SUBDIR = board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
 AT91BOOTSTRAP_BINARY      = $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
 
@@ -36,13 +36,13 @@ $(eval $(call GENTARGETS,boot,at91bootstrap))
 # Toplevel Makefile options
 #
 #############################################################
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+ifeq ($(BR2_BOOT_AT91BOOTSTRAP),y)
 TARGETS+=at91bootstrap
 
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(AT91BOOTSTRAP_BOARD),)
-$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
+$(error No AT91Bootstrap board name set. Check your BR2_BOOT_AT91BOOTSTRAP_BOARD setting)
 endif
 endif
 
boot/at91dataflashboot/Config.in +1 -1
index 88cd058..3ac2928 100644
@@ -1,3 +1,3 @@
-menuconfig BR2_TARGET_AT91DATAFLASHBOOT
+menuconfig BR2_BOOT_AT91DATAFLASHBOOT
        depends on BR2_arm
        bool "AT91 DataFlashBoot"
boot/at91dataflashboot/at91dataflashboot.mk +1 -1
index d27e9f3..119c452 100644
@@ -25,6 +25,6 @@ $(eval $(call GENTARGETS,boot,at91dataflashboot))
 # Toplevel Makefile options
 #
 #############################################################
-ifeq ($(BR2_TARGET_AT91DATAFLASHBOOT),y)
+ifeq ($(BR2_BOOT_AT91DATAFLASHBOOT),y)
 TARGETS+=at91dataflashboot
 endif
boot/barebox/Config.in +4 -4
index a821c45..7f377a4 100644
@@ -1,18 +1,18 @@
-menuconfig BR2_TARGET_BAREBOX
+menuconfig BR2_BOOT_BAREBOX
 	bool "Barebox"
 	help
 	  The Barebox bootloader, formerly known as U-Boot v2.
 
 	  http://www.barebox.org
 
-if BR2_TARGET_BAREBOX
-config BR2_TARGET_BAREBOX_BOARD_DEFCONFIG
+if BR2_BOOT_BAREBOX
+config BR2_BOOT_BAREBOX_BOARD_DEFCONFIG
 	string "board defconfig"
 	help
 	  Name of the board for which Barebox should be built, without
 	  the _defconfig suffix.
 
-config BR2_TARGET_BAREBOX_BAREBOXENV
+config BR2_BOOT_BAREBOX_BAREBOXENV
 	bool "bareboxenv tool in target"
 	help
 	  Install bareboxenv tool in target.
boot/barebox/barebox.mk +6 -6
index 4ed0389..859b301 100644
@@ -9,11 +9,11 @@ BAREBOX_SOURCE  = barebox-$(BAREBOX_VERSION).tar.bz2
 BAREBOX_SITE    = http://www.barebox.org/download/
 
 BAREBOX_INSTALL_IMAGES = YES
-ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifneq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
 BAREBOX_INSTALL_TARGET = NO
 endif
 
-BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
+BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_BOOT_BAREBOX_BOARD_DEFCONFIG))
 
 ifeq ($(KERNEL_ARCH),i386)
 BAREBOX_ARCH=x86
@@ -29,7 +29,7 @@ define BAREBOX_CONFIGURE_CMDS
 	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
 endef
 
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
 define BAREBOX_BUILD_BAREBOXENV_CMDS
 	$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
 		$(@D)/scripts/bareboxenv.c
@@ -45,7 +45,7 @@ define BAREBOX_INSTALL_IMAGES_CMDS
 	cp $(@D)/barebox.bin $(BINARIES_DIR)
 endef
 
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
 define BAREBOX_INSTALL_TARGET_CMDS
 	cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
 endef
@@ -53,13 +53,13 @@ endif
 
 $(eval $(call GENTARGETS,boot,barebox))
 
-ifeq ($(BR2_TARGET_BAREBOX),y)
+ifeq ($(BR2_BOOT_BAREBOX),y)
 TARGETS+=barebox
 
 # we NEED a board defconfig file unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(BAREBOX_BOARD_DEFCONFIG),)
-$(error No Barebox defconfig file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG setting)
+$(error No Barebox defconfig file. Check your BR2_BOOT_BAREBOX_BOARD_DEFCONFIG setting)
 endif
 endif
 
boot/grub/Config.in +47 -47

193 lines not on this page · raw message

boot/grub/grub.mk +25 -25

67 lines not on this page · raw message

boot/syslinux/Config.in +5 -5
index 60f3b8f..eaa3d70 100644
@@ -1,16 +1,16 @@
-config BR2_TARGET_SYSLINUX
+config BR2_BOOT_SYSLINUX
 	bool "syslinux"
 	depends on BR2_i386 || BR2_x86_64
 	help
 	  The syslinux bootloader for x86 systems.
 	  This includes: syslinux, pxelinux, extlinux.
 
-config BR2_TARGET_SYSLINUX_ISOLINUX
+config BR2_BOOT_SYSLINUX_ISOLINUX
 	bool "Install isolinux"
-	depends on BR2_TARGET_SYSLINUX
+	depends on BR2_BOOT_SYSLINUX
 	default y
 
-config BR2_TARGET_SYSLINUX_PXELINUX
+config BR2_BOOT_SYSLINUX_PXELINUX
 	bool "Install pxelinux"
-	depends on BR2_TARGET_SYSLINUX
+	depends on BR2_BOOT_SYSLINUX
 	default y
boot/syslinux/syslinux.mk +3 -3
index d1b2907..1f50ed5 100644
@@ -17,8 +17,8 @@ define SYSLINUX_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(@D)
 endef
 
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_ISOLINUX) += isolinux.bin
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_PXELINUX) += pxelinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_ISOLINUX) += isolinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_PXELINUX) += pxelinux.bin
 
 define SYSLINUX_INSTALL_IMAGES_CMDS
 	for i in $(SYSLINUX_IMAGES-y); do \
@@ -33,6 +33,6 @@ $(eval $(call GENTARGETS,boot,syslinux))
 # Toplevel Makefile options
 #
 #############################################################
-ifeq ($(BR2_TARGET_SYSLINUX),y)
+ifeq ($(BR2_BOOT_SYSLINUX),y)
 TARGETS+=syslinux
 endif
boot/u-boot/Config.in +35 -35

160 lines not on this page · raw message

boot/u-boot/u-boot.mk +17 -17
index 215b1c7..ecbf675 100644
@@ -3,14 +3,14 @@
 # U-Boot
 #
 #############################################################
-U_BOOT_VERSION    = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
-U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+U_BOOT_VERSION    = $(call qstrip,$(BR2_BOOT_UBOOT_VERSION))
+U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_BOOT_UBOOT_BOARDNAME))
 
 U_BOOT_INSTALL_IMAGES = YES
 
 ifeq ($(U_BOOT_VERSION),custom)
 # Handle custom U-Boot tarballs as specified by the configuration
-U_BOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
+U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION))
 U_BOOT_SITE    = $(dir $(U_BOOT_TARBALL))
 U_BOOT_SOURCE  = $(notdir $(U_BOOT_TARBALL))
 else
@@ -19,10 +19,10 @@ U_BOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
 U_BOOT_SOURCE  = u-boot-$(U_BOOT_VERSION).tar.bz2
 endif
 
-ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
+ifeq ($(BR2_BOOT_UBOOT_FORMAT_KWB),y)
 U_BOOT_BIN          = u-boot.kwb
 U_BOOT_MAKE_TARGET  = $(U_BOOT_BIN)
-else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
+else ifeq ($(BR2_BOOT_UBOOT_FORMAT_LDR),y)
 U_BOOT_BIN          = u-boot.ldr
 else
 U_BOOT_BIN          = u-boot.bin
@@ -52,9 +52,9 @@ $(if $(call qstrip,$(2)),
 	@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
 endef
 
-ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
+ifneq ($(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR)),)
 define U_BOOT_APPLY_CUSTOM_PATCHES
-	toolchain/patch-kernel.sh $(@D) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) \
+	toolchain/patch-kernel.sh $(@D) $(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR) \
 		u-boot-$(U_BOOT_VERSION)-\*.patch
 endef
 
@@ -71,16 +71,16 @@ define U_BOOT_CONFIGURE_CMDS
 	@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
 	$(call insert_define,DATE,$(DATE))
 	$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
-	$(call insert_define,CONFIG_IPADDR,$(BR2_TARGET_UBOOT_IPADDR))
-	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_TARGET_UBOOT_GATEWAY))
-	$(call insert_define,CONFIG_NETMASK,$(BR2_TARGET_UBOOT_NETMASK))
-	$(call insert_define,CONFIG_SERVERIP,$(BR2_TARGET_UBOOT_SERVERIP))
-	$(call insert_define,CONFIG_ETHADDR,$(BR2_TARGET_UBOOT_ETHADDR))
-	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_TARGET_UBOOT_ETH1ADDR))
+	$(call insert_define,CONFIG_IPADDR,$(BR2_BOOT_UBOOT_IPADDR))
+	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_BOOT_UBOOT_GATEWAY))
+	$(call insert_define,CONFIG_NETMASK,$(BR2_BOOT_UBOOT_NETMASK))
+	$(call insert_define,CONFIG_SERVERIP,$(BR2_BOOT_UBOOT_SERVERIP))
+	$(call insert_define,CONFIG_ETHADDR,$(BR2_BOOT_UBOOT_ETHADDR))
+	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_BOOT_UBOOT_ETH1ADDR))
 	@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
 endef
 
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
 define U_BOOT_BUILD_TARGET_ENV_UTILS
 	$(TARGET_CONFIGURE_OPTS) $(MAKE) HOSTCC="$(TARGET_CC)" -C $(@D) env
 endef
@@ -97,7 +97,7 @@ define U_BOOT_INSTALL_IMAGES_CMDS
 	cp -dpf $(@D)/$(U_BOOT_BIN) $(BINARIES_DIR)/
 endef
 
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
 define U_BOOT_INSTALL_TARGET_ENV_UTILS
 	$(INSTALL) -m 0755 -D $(@D)/tools/env/fw_printenv \
 		$(TARGET_DIR)/usr/sbin/fw_printenv
@@ -116,13 +116,13 @@ $(eval $(call GENTARGETS,boot,u-boot))
 # Toplevel Makefile options
 #
 #############################################################
-ifeq ($(BR2_TARGET_UBOOT),y)
+ifeq ($(BR2_BOOT_UBOOT),y)
 TARGETS+=u-boot
 
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(U_BOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+$(error NO U-Boot board name set. Check your BR2_BOOT_UBOOT_BOARDNAME setting)
 endif
 endif
 
Signature · 1 line
1.7.4.1
#41 lore raw

PATCH 23/28 u-boot: rename options BR2_BOOT_UBOOT* to BR2_BOOT_U_BOOT*

In reply to Thomas Petazzoni

As we are moving U-Boot to the package infrastructure, the Kconfig options must match the package name. As the package name is 'u-boot', the Kconfig options must be BR2_BOOT_U_BOOT*.

---
 boot/u-boot/Config.in |   70 ++++++++++++++++++++++++------------------------
 boot/u-boot/u-boot.mk |   35 ++++++++++++------------
 2 files changed, 52 insertions(+), 53 deletions(-)
boot/u-boot/Config.in +35 -35
index d9a6385..658a539 100644
@@ -1,10 +1,10 @@
-menuconfig BR2_BOOT_UBOOT
+menuconfig BR2_BOOT_U_BOOT
 	bool "U-Boot"
 	help
 	  Build "Das U-Boot" Boot Monitor
 
-if BR2_BOOT_UBOOT
-config BR2_BOOT_UBOOT_BOARDNAME
+if BR2_BOOT_U_BOOT
+config BR2_BOOT_U_BOOT_BOARDNAME
 	string "U-Boot board name"
 	help
 	  One of U-Boot supported boards to be built.
@@ -12,47 +12,47 @@ config BR2_BOOT_UBOOT_BOARDNAME
 
 choice
 	prompt "U-Boot Version"
-	default BR2_BOOT_UBOOT_2011_03
+	default BR2_BOOT_U_BOOT_2011_03
 	help
 	  Select the specific U-Boot version you want to use
 
-config BR2_BOOT_UBOOT_2011_03
+config BR2_BOOT_U_BOOT_2011_03
 	bool "2011.03"
 
-config BR2_BOOT_UBOOT_2010_12
+config BR2_BOOT_U_BOOT_2010_12
 	bool "2010.12"
 
-config BR2_BOOT_UBOOT_2010_09
+config BR2_BOOT_U_BOOT_2010_09
 	bool "2010.09"
 
-config BR2_BOOT_UBOOT_2010_06
+config BR2_BOOT_U_BOOT_2010_06
 	bool "2010.06"
 
-config BR2_BOOT_UBOOT_2010_03
+config BR2_BOOT_U_BOOT_2010_03
 	bool "2010.03"
 
-config BR2_BOOT_UBOOT_CUSTOM_TARBALL
+config BR2_BOOT_U_BOOT_CUSTOM_TARBALL
 	bool "Custom tarball"
 
 endchoice
 
-if BR2_BOOT_UBOOT_CUSTOM_TARBALL
+if BR2_BOOT_U_BOOT_CUSTOM_TARBALL
 
-config BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION
+config BR2_BOOT_U_BOOT_CUSTOM_TARBALL_LOCATION
 	string "URL of custom U-Boot tarball"
 
 endif
 
-config BR2_BOOT_UBOOT_VERSION
+config BR2_BOOT_U_BOOT_VERSION
 	string
-	default "2011.03"	if BR2_BOOT_UBOOT_2011_03
-	default "2010.12"	if BR2_BOOT_UBOOT_2010_12
-	default "2010.09"	if BR2_BOOT_UBOOT_2010_09
-	default "2010.06"	if BR2_BOOT_UBOOT_2010_06
-	default "2010.03"	if BR2_BOOT_UBOOT_2010_03
-	default "custom"	if BR2_BOOT_UBOOT_CUSTOM_TARBALL
-
-config BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR
+	default "2011.03"	if BR2_BOOT_U_BOOT_2011_03
+	default "2010.12"	if BR2_BOOT_U_BOOT_2010_12
+	default "2010.09"	if BR2_BOOT_U_BOOT_2010_09
+	default "2010.06"	if BR2_BOOT_U_BOOT_2010_06
+	default "2010.03"	if BR2_BOOT_U_BOOT_2010_03
+	default "custom"	if BR2_BOOT_U_BOOT_CUSTOM_TARBALL
+
+config BR2_BOOT_U_BOOT_CUSTOM_PATCH_DIR
 	string "custom patch dir"
 	help
 	  If your board requires custom patches, add the path to the
@@ -64,68 +64,68 @@ config BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR
 choice
 	prompt "U-Boot binary format"
 
-config BR2_BOOT_UBOOT_FORMAT_BIN
+config BR2_BOOT_U_BOOT_FORMAT_BIN
 	bool "u-boot.bin"
 
-config BR2_BOOT_UBOOT_FORMAT_KWB
+config BR2_BOOT_U_BOOT_FORMAT_KWB
 	depends on BR2_arm
 	bool "u-boot.kwb (Marvell)"
 
-config BR2_BOOT_UBOOT_FORMAT_LDR
+config BR2_BOOT_U_BOOT_FORMAT_LDR
 	depends on BR2_bfin
 	bool "u-boot.ldr"
 
 endchoice
 
-config BR2_BOOT_UBOOT_TOOL_ENV
+config BR2_BOOT_U_BOOT_TOOL_ENV
 	bool "fw_printenv tool in target"
 	help
 	  Install fw_printenv / fw_setenv tools in target.
 
-menuconfig BR2_BOOT_UBOOT_NETWORK
+menuconfig BR2_BOOT_U_BOOT_NETWORK
 	bool "Network Settings"
 	default y
 	help
 	  Network settings for U-boot
 
-if BR2_BOOT_UBOOT_NETWORK
+if BR2_BOOT_U_BOOT_NETWORK
 
-config BR2_BOOT_UBOOT_SERVERIP
+config BR2_BOOT_U_BOOT_SERVERIP
 	string "server ip"
 	default "10.175.196.221"
 	help
 	  TFTP server ip address
 
-config BR2_BOOT_UBOOT_IPADDR
+config BR2_BOOT_U_BOOT_IPADDR
 	string "ip address"
 	default "10.175.196.18"
 	help
 	  Target ip address
 
-config BR2_BOOT_UBOOT_GATEWAY
+config BR2_BOOT_U_BOOT_GATEWAY
 	string "gateway ip"
 	default "10.175.196.1"
 	help
 	  Gateway ip address
 
-config BR2_BOOT_UBOOT_NETMASK
+config BR2_BOOT_U_BOOT_NETMASK
 	string "netmask"
 	default "255.255.255.0"
 	help
 	  Network Mask
 
-config BR2_BOOT_UBOOT_ETHADDR
+config BR2_BOOT_U_BOOT_ETHADDR
 	string "ethernet address"
 	default "04:25:fe:ed:00:18"
 	help
 	  Target MAC address for the ethernet interface.
 	  This should be changed for production units
 
-config BR2_BOOT_UBOOT_ETH1ADDR
+config BR2_BOOT_U_BOOT_ETH1ADDR
 	string "ethernet 2 address"
 	help
 	  Target MAC address for the second ethernet interface.
 
-endif # BR2_BOOT_UBOOT_NETWORK
+endif # BR2_BOOT_U_BOOT_NETWORK
 
-endif # BR2_BOOT_UBOOT
+endif # BR2_BOOT_U_BOOT
boot/u-boot/u-boot.mk +17 -18
index ecbf675..d6fb881 100644
@@ -3,14 +3,14 @@
 # U-Boot
 #
 #############################################################
-U_BOOT_VERSION    = $(call qstrip,$(BR2_BOOT_UBOOT_VERSION))
-U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_BOOT_UBOOT_BOARDNAME))
+U_BOOT_VERSION    = $(call qstrip,$(BR2_BOOT_U_BOOT_VERSION))
+U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_BOOT_U_BOOT_BOARDNAME))
 
 U_BOOT_INSTALL_IMAGES = YES
 
 ifeq ($(U_BOOT_VERSION),custom)
 # Handle custom U-Boot tarballs as specified by the configuration
-U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION))
+U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_U_BOOT_CUSTOM_TARBALL_LOCATION))
 U_BOOT_SITE    = $(dir $(U_BOOT_TARBALL))
 U_BOOT_SOURCE  = $(notdir $(U_BOOT_TARBALL))
 else
@@ -19,10 +19,10 @@ U_BOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
 U_BOOT_SOURCE  = u-boot-$(U_BOOT_VERSION).tar.bz2
 endif
 
-ifeq ($(BR2_BOOT_UBOOT_FORMAT_KWB),y)
+ifeq ($(BR2_BOOT_U_BOOT_FORMAT_KWB),y)
 U_BOOT_BIN          = u-boot.kwb
 U_BOOT_MAKE_TARGET  = $(U_BOOT_BIN)
-else ifeq ($(BR2_BOOT_UBOOT_FORMAT_LDR),y)
+else ifeq ($(BR2_BOOT_U_BOOT_FORMAT_LDR),y)
 U_BOOT_BIN          = u-boot.ldr
 else
 U_BOOT_BIN          = u-boot.bin
@@ -52,9 +52,9 @@ $(if $(call qstrip,$(2)),
 	@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
 endef
 
-ifneq ($(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR)),)
+ifneq ($(call qstrip,$(BR2_BOOT_U_BOOT_CUSTOM_PATCH_DIR)),)
 define U_BOOT_APPLY_CUSTOM_PATCHES
-	toolchain/patch-kernel.sh $(@D) $(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR) \
+	toolchain/patch-kernel.sh $(@D) $(BR2_BOOT_U_BOOT_CUSTOM_PATCH_DIR) \
 		u-boot-$(U_BOOT_VERSION)-\*.patch
 endef
 
@@ -71,16 +71,16 @@ define U_BOOT_CONFIGURE_CMDS
 	@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
 	$(call insert_define,DATE,$(DATE))
 	$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
-	$(call insert_define,CONFIG_IPADDR,$(BR2_BOOT_UBOOT_IPADDR))
-	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_BOOT_UBOOT_GATEWAY))
-	$(call insert_define,CONFIG_NETMASK,$(BR2_BOOT_UBOOT_NETMASK))
-	$(call insert_define,CONFIG_SERVERIP,$(BR2_BOOT_UBOOT_SERVERIP))
-	$(call insert_define,CONFIG_ETHADDR,$(BR2_BOOT_UBOOT_ETHADDR))
-	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_BOOT_UBOOT_ETH1ADDR))
+	$(call insert_define,CONFIG_IPADDR,$(BR2_BOOT_U_BOOT_IPADDR))
+	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_BOOT_U_BOOT_GATEWAY))
+	$(call insert_define,CONFIG_NETMASK,$(BR2_BOOT_U_BOOT_NETMASK))
+	$(call insert_define,CONFIG_SERVERIP,$(BR2_BOOT_U_BOOT_SERVERIP))
+	$(call insert_define,CONFIG_ETHADDR,$(BR2_BOOT_U_BOOT_ETHADDR))
+	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_BOOT_U_BOOT_ETH1ADDR))
 	@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
 endef
 
-ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_U_BOOT_TOOL_ENV),y)
 define U_BOOT_BUILD_TARGET_ENV_UTILS
 	$(TARGET_CONFIGURE_OPTS) $(MAKE) HOSTCC="$(TARGET_CC)" -C $(@D) env
 endef
@@ -97,7 +97,7 @@ define U_BOOT_INSTALL_IMAGES_CMDS
 	cp -dpf $(@D)/$(U_BOOT_BIN) $(BINARIES_DIR)/
 endef
 
-ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_U_BOOT_TOOL_ENV),y)
 define U_BOOT_INSTALL_TARGET_ENV_UTILS
 	$(INSTALL) -m 0755 -D $(@D)/tools/env/fw_printenv \
 		$(TARGET_DIR)/usr/sbin/fw_printenv
@@ -116,13 +116,12 @@ $(eval $(call GENTARGETS,boot,u-boot))
 # Toplevel Makefile options
 #
 #############################################################
-ifeq ($(BR2_BOOT_UBOOT),y)
+ifeq ($(BR2_BOOT_U_BOOT),y)
 TARGETS+=u-boot
-
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(U_BOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_BOOT_UBOOT_BOARDNAME setting)
+$(error NO U-Boot board name set. Check your BR2_BOOT_U_BOOT_BOARDNAME setting)
 endif
 endif
 
Signature · 1 line
1.7.4.1
#42 lore raw

PATCH 24/28 Improve TARGETS handling for bootloaders and kernel

In reply to Thomas Petazzoni

As the kernel and bootloaders do not use the normal BR2_PACKAGE_* Kconfig options, their target name was not automatically added to the global TARGETS variable. Each bootloader .mk and the linux.mk had to add their own target manually to TARGETS, and the package infrastructure was making tests on non-existing Kconfig variables.

This commit improves the package infrastructure so that it looks at BR2_PACKAGE_<pkg> for packages, BR2_BOOT_<pkg> for bootloaders and at the special BR2_LINUX_KERNEL for the linux package.

This allows to simplify a little bit the bootloaders and linux .mk files.

---
 boot/at91bootstrap/at91bootstrap.mk         |    8 --------
 boot/at91dataflashboot/at91dataflashboot.mk |    9 ---------
 boot/barebox/barebox.mk                     |    2 --
 boot/grub/grub.mk                           |    9 ---------
 boot/syslinux/syslinux.mk                   |    9 ---------
 boot/u-boot/u-boot.mk                       |    2 --
 linux/linux.mk                              |    5 -----
 package/Makefile.package.in                 |   16 +++++++++++++---
 8 files changed, 13 insertions(+), 47 deletions(-)
boot/at91bootstrap/at91bootstrap.mk +0 -8
index 58d547d..9c1dfe1 100644
@@ -31,19 +31,11 @@ endef
 
 $(eval $(call GENTARGETS,boot,at91bootstrap))
 
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
 ifeq ($(BR2_BOOT_AT91BOOTSTRAP),y)
-TARGETS+=at91bootstrap
-
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(AT91BOOTSTRAP_BOARD),)
 $(error No AT91Bootstrap board name set. Check your BR2_BOOT_AT91BOOTSTRAP_BOARD setting)
 endif
 endif
-
 endif
boot/at91dataflashboot/at91dataflashboot.mk +0 -9
index 119c452..a891c60 100644
@@ -19,12 +19,3 @@ define AT91DATAFLASHBOOT_INSTALL_IMAGES_CMDS
 endef
 
 $(eval $(call GENTARGETS,boot,at91dataflashboot))
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_BOOT_AT91DATAFLASHBOOT),y)
-TARGETS+=at91dataflashboot
-endif
boot/barebox/barebox.mk +0 -2
index 859b301..8f39661 100644
@@ -54,8 +54,6 @@ endif
 $(eval $(call GENTARGETS,boot,barebox))
 
 ifeq ($(BR2_BOOT_BAREBOX),y)
-TARGETS+=barebox
-
 # we NEED a board defconfig file unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(BAREBOX_BOARD_DEFCONFIG),)
boot/grub/grub.mk +0 -9
index 93238cb..aed89d0 100644
@@ -83,12 +83,3 @@ define GRUB_UNINSTALL_TARGET_CMDS
 endef
 
 $(eval $(call AUTOTARGETS,boot,grub))
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_BOOT_GRUB),y)
-TARGETS+=grub
-endif
boot/syslinux/syslinux.mk +0 -9
index 1f50ed5..be1f0ca 100644
@@ -27,12 +27,3 @@ define SYSLINUX_INSTALL_IMAGES_CMDS
 endef
 
 $(eval $(call GENTARGETS,boot,syslinux))
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_BOOT_SYSLINUX),y)
-TARGETS+=syslinux
-endif
boot/u-boot/u-boot.mk +0 -2
index d6fb881..97d7921 100644
@@ -117,12 +117,10 @@ $(eval $(call GENTARGETS,boot,u-boot))
 #
 #############################################################
 ifeq ($(BR2_BOOT_U_BOOT),y)
-TARGETS+=u-boot
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(U_BOOT_BOARD_NAME),)
 $(error NO U-Boot board name set. Check your BR2_BOOT_U_BOOT_BOARDNAME setting)
 endif
 endif
-
 endif
linux/linux.mk +0 -5
index 0753fac..7e5f434 100644
@@ -196,11 +196,6 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LI
 # after it generated the initramfs list of files.
 linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX_DIR)/.stamp_initramfs_rebuilt
 
-
-ifeq ($(BR2_LINUX_KERNEL),y)
-TARGETS+=linux
-endif
-
 # Checks to give errors that the user can understand
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
package/Makefile.package.in +13 -3
index ff0fd9f..61947a8 100644
@@ -522,10 +522,20 @@ $$($(2)_TARGET_UNINSTALL):		PKG=$(2)
 $$($(2)_TARGET_CLEAN):			PKG=$(2)
 $$($(2)_TARGET_DIRCLEAN):		PKG=$(2)
 
+# Compute the name of the Kconfig option that correspond to the
+# package being enabled. We handle three cases: the special Linux
+# kernel case, the bootloaders case, and the normal packages case.
+ifeq ($(1),linux)
+$(2)_KCONFIG_VAR = BR2_LINUX_KERNEL
+else ifeq ($(4),boot)
+$(2)_KCONFIG_VAR = BR2_BOOT_$(2)
+else
+$(2)_KCONFIG_VAR = BR2_PACKAGE_$(2)
+endif
+
 # add package to the general list of targets if requested by the buildroot
 # configuration
-
-ifeq ($$(BR2_PACKAGE_$(2)),y)
+ifeq ($$($$($(2)_KCONFIG_VAR)),y)
 
 TARGETS += $(1)
 
@@ -537,7 +547,7 @@ else ifeq ($$($(2)_SITE_METHOD),bzr)
 DL_TOOLS_DEPENDENCIES += bzr
 endif # SITE_METHOD
 
-endif # BR2_PACKAGE_$(2)
+endif # $(2)_KCONFIG_VAR
 endef # GENTARGETS_INNER
 
 ################################################################################
Signature · 1 line
1.7.4.1
#43 lore raw

PATCH 24/28 Improve TARGETS handling for bootloaders and kernel

Thomas, All,

On Monday 04 July 2011 23:33:41 Thomas Petazzoni wrote:
[--SNIP--]

Quoted 3 lines

This commit improves the package infrastructure so that it looks at BR2_PACKAGE_<pkg> for packages, BR2_BOOT_<pkg> for bootloaders and at the special BR2_LINUX_KERNEL for the linux package.

For consistency, I'd suggest using 'BR2_KERNEL_LINUX'.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#44 lore raw

PATCH 24/28 Improve TARGETS handling for bootloaders and kernel

Le Tue, 5 Jul 2011 00:27:11 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 5 lines
Quoted 3 lines

This commit improves the package infrastructure so that it looks at BR2_PACKAGE_<pkg> for packages, BR2_BOOT_<pkg> for bootloaders and at the special BR2_LINUX_KERNEL for the linux package.

For consistency, I'd suggest using 'BR2_KERNEL_LINUX'.

Well, it doesn't make a big difference, but I have no strong opinion about this. What's the opinion of others ?

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#45 lore raw

PATCH 25/28 linux: allow specification of a custom Git repository as a source

In reply to Thomas Petazzoni
---
 linux/Config.in |   15 +++++++++++++++
 linux/linux.mk  |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)
linux/Config.in +15 -0
index c9229a5..f44dc62 100644
@@ -47,6 +47,12 @@ config BR2_LINUX_KERNEL_CUSTOM_TARBALL
 	  This option allows to specify the http or ftp location of a
 	  specific kernel source tarball
 
+config BR2_LINUX_KERNEL_CUSTOM_GIT
+        bool "Custom Git tree"
+	help
+	  This option allows Buildroot to get the Linux kernel source
+	  code from a Git repository.
+
 endchoice
 
 config BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE
@@ -58,12 +64,21 @@ config BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION
 	string "URL of custom kernel tarball"
 	depends on BR2_LINUX_KERNEL_CUSTOM_TARBALL
 
+config BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL
+        string "URL of custom Git repository"
+	depends on BR2_LINUX_KERNEL_CUSTOM_GIT
+
+config BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION
+        string "Custom Git version"
+	depends on BR2_LINUX_KERNEL_CUSTOM_GIT
+
 config BR2_LINUX_KERNEL_VERSION
 	string
 	default "2.6.39.2" if BR2_LINUX_KERNEL_2_6_39
 	default BR2_DEFAULT_KERNEL_HEADERS if BR2_LINUX_KERNEL_SAME_AS_HEADERS
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE if BR2_LINUX_KERNEL_CUSTOM_VERSION
 	default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL
+	default $BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION if BR2_LINUX_KERNEL_CUSTOM_GIT
 
 #
 # Patch selection
linux/linux.mk +3 -0
index 7e5f434..03eae3d 100644
@@ -10,6 +10,9 @@ ifeq ($(LINUX_VERSION),custom)
 LINUX_TARBALL = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
 LINUX_SITE    = $(dir $(LINUX_TARBALL))
 LINUX_SOURCE  = $(notdir $(LINUX_TARBALL))
+else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_GIT),y)
+LINUX_SITE        = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL))
+LINUX_SITE_METHOD = git
 else
 LINUX_SOURCE  = linux-$(LINUX_VERSION).tar.bz2
 LINUX_SITE    = $(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
Signature · 1 line
1.7.4.1
#46 lore raw

PATCH 26/28 u-boot: allow specification of custom Git repo as source

In reply to Thomas Petazzoni
---
 boot/u-boot/Config.in |   14 ++++++++++++++
 boot/u-boot/u-boot.mk |    3 +++
 2 files changed, 17 insertions(+), 0 deletions(-)
boot/u-boot/Config.in +14 -0
index 658a539..dde92d3 100644
@@ -34,6 +34,9 @@ config BR2_BOOT_U_BOOT_2010_03
 config BR2_BOOT_U_BOOT_CUSTOM_TARBALL
 	bool "Custom tarball"
 
+config BR2_BOOT_U_BOOT_CUSTOM_GIT
+        bool "Custom Git repository"
+
 endchoice
 
 if BR2_BOOT_U_BOOT_CUSTOM_TARBALL
@@ -43,6 +46,16 @@ config BR2_BOOT_U_BOOT_CUSTOM_TARBALL_LOCATION
 
 endif
 
+if BR2_BOOT_U_BOOT_CUSTOM_GIT
+
+config BR2_BOOT_U_BOOT_CUSTOM_GIT_REPO_URL
+        string "URL of custom Git repository"
+
+config BR2_BOOT_U_BOOT_CUSTOM_GIT_VERSION
+        string "Custom Git version"
+
+endif
+
 config BR2_BOOT_U_BOOT_VERSION
 	string
 	default "2011.03"	if BR2_BOOT_U_BOOT_2011_03
@@ -51,6 +64,7 @@ config BR2_BOOT_U_BOOT_VERSION
 	default "2010.06"	if BR2_BOOT_U_BOOT_2010_06
 	default "2010.03"	if BR2_BOOT_U_BOOT_2010_03
 	default "custom"	if BR2_BOOT_U_BOOT_CUSTOM_TARBALL
+	default $BR2_BOOT_U_BOOT_CUSTOM_GIT_VERSION if BR2_BOOT_U_BOOT_CUSTOM_GIT
 
 config BR2_BOOT_U_BOOT_CUSTOM_PATCH_DIR
 	string "custom patch dir"
boot/u-boot/u-boot.mk +3 -0
index 97d7921..6334fad 100644
@@ -13,6 +13,9 @@ ifeq ($(U_BOOT_VERSION),custom)
 U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_U_BOOT_CUSTOM_TARBALL_LOCATION))
 U_BOOT_SITE    = $(dir $(U_BOOT_TARBALL))
 U_BOOT_SOURCE  = $(notdir $(U_BOOT_TARBALL))
+else ifeq ($(BR2_BOOT_U_BOOT_CUSTOM_GIT),y)
+U_BOOT_SITE        = $(call qstrip,$(BR2_BOOT_U_BOOT_CUSTOM_GIT_REPO_URL))
+U_BOOT_SITE_METHOD = git
 else
 # Handle stable official U-Boot versions
 U_BOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
Signature · 1 line
1.7.4.1
#47 lore raw

PATCH 27/28 Add x-loader bootloader

In reply to Thomas Petazzoni

From: Philippe Reynes <[email protected]>

[Thomas Petazzoni: use BR2_BOOT prefix instead of BR2_TARGET, misc fixes]

---
 boot/Config.in            |    1 +
 boot/x-loader/Config.in   |   15 +++++++++++++++
 boot/x-loader/x-loader.mk |   35 +++++++++++++++++++++++++++++++++++
 3 files changed, 51 insertions(+), 0 deletions(-)
 create mode 100644 boot/x-loader/Config.in
 create mode 100644 boot/x-loader/x-loader.mk
boot/Config.in +1 -0
index 67ab8ac..a07102e 100644
@@ -6,6 +6,7 @@ source "boot/syslinux/Config.in"
 source "boot/u-boot/Config.in"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91dataflashboot/Config.in"
+source "boot/x-loader/Config.in"
 
 endmenu
 
boot/x-loader/Config.in new file +15 -0
new file mode 100644
index 0000000..9597337
@@ -0,0 +1,15 @@
+menuconfig BR2_BOOT_XLOADER
+	bool "X-loader"
+	depends on BR2_arm
+	help
+	  The x-loader bootloader. It is mainly used on OMAP-based
+	  platforms.
+
+if BR2_BOOT_XLOADER
+config BR2_BOOT_XLOADER_BOARDNAME
+	string "x-loader board name"
+	help
+	  One of x-loader supported boards to be built.
+	  This will be suffixed with _config to meet x-loader
+	  standard naming.
+endif
boot/x-loader/x-loader.mk new file +35 -0
new file mode 100644
index 0000000..31395ee
@@ -0,0 +1,35 @@
+#############################################################
+#
+# x-loader
+#
+#############################################################
+XLOADER_VERSION    = 6f3a26101303051e0f91b6213735b68ce804e94e
+XLOADER_SITE       = git://gitorious.org/x-loader/x-loader.git
+XLOADER_BOARD_NAME = $(call qstrip,$(BR2_BOOT_XLOADER_BOARDNAME))
+
+define XLOADER_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) $(XLOADER_BOARD_NAME)_config
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) all
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) ift
+endef
+
+define XLOADER_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/MLO $(BINARIES_DIR)/
+endef
+
+$(eval $(call GENTARGETS,boot,xloader))
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_BOOT_XLOADER),y)
+# we NEED a board name unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(XLOADER_BOARD_NAME),)
+$(error NO x-loader board name set. Check your BR2_BOOT_XLOADER_BOARDNAME setting)
+endif
+endif
+
+endif
Signature · 1 line
1.7.4.1
#48 lore raw

PATCH 28/28 barebox: bump version

In reply to Thomas Petazzoni
---
 boot/barebox/barebox.mk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
boot/barebox/barebox.mk +1 -1
index 8f39661..1bbbb46 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-BAREBOX_VERSION = 2011.05.0
+BAREBOX_VERSION = 2011.06.0
 BAREBOX_SOURCE  = barebox-$(BAREBOX_VERSION).tar.bz2
 BAREBOX_SITE    = http://www.barebox.org/download/
 
Signature · 1 line
1.7.4.1
#49 lore raw
In reply to Thomas Petazzoni

Thomas, All,

On Monday 04 July 2011 23:33:17 Thomas Petazzoni wrote:
[--SNIP--]

Quoted 4 lines

The following changes since commit c80224a3a05e41af5a32e1c663fd3853f313382b:
toolchain/gcc: bump 4.6.x version to 4.6.1 (2011-06-28 15:19:13 +0200)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.08/bootloaders

403 - Forbidden. ;-)

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#50 lore raw

Le Mon, 4 Jul 2011 23:44:19 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 10 lines

Thomas, All,

On Monday 04 July 2011 23:33:17 Thomas Petazzoni wrote:
[--SNIP--]

Quoted 4 lines

The following changes since commit c80224a3a05e41af5a32e1c663fd3853f313382b:
toolchain/gcc: bump 4.6.x version to 4.6.1 (2011-06-28 15:19:13 +0200)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.08/bootloaders

403 - Forbidden. ;-)

It's a git repo, not a git repo viewer. Cloning this URL works just fine, it's just that repository listing is not enabled on the web server.

Peter: I still cannot use my account at uclibc.org.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com