Boot hangs on IBM T60
Hi, all
It happens very rarely that the system hangs while booting.
The last message on console is :
Activating device mapper..
I dont' get any oops and the system works without any problem if it boots. :)
uname -a gives
2.6.18.8-0.5-default #1 SMP Fri Jun 22 12:17:53 UTC
2007 i686 i686 i386 GNU/Linux
Let me know if you need more information, with the steps to generate that info. :)
I am pasting a few lines which fall above and below the mapper activation as shown by dmesg for a successful boot.
Thanks
Sri
Yenta: ISA IRQ mask 0x0cf0, PCI irq 169 Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
cs: IO port probe 0xa000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:03:00.0 to 64
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
Adding 1004020k swap on /dev/sda7. Priority:-1 extents:1 across:1004020k
##Here I get the "activating device mapper" on console##
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24)
initialised: [email protected]
loop: loaded (max 8 devices)
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
Jats do it
Try the revolutionary next-gen Yahoo! Mail. Go to http://mrd.mail.yahoo.com/dc/landing
Quoted 67 lines · On Mon, 20 Aug 2007 16:10:11 +0100 (BST) sk malik wrote:
Hi, all
It happens very rarely that the system hangs while booting.
The last message on console is :
Activating device mapper..
I dont' get any oops and the system works without any problem if it boots. :)
uname -a gives
2.6.18.8-0.5-default #1 SMP Fri Jun 22 12:17:53 UTC
2007 i686 i686 i386 GNU/LinuxLet me know if you need more information, with the steps to generate that info. :)
I am pasting a few lines which fall above and below the mapper activation as shown by dmesg for a successful boot.
Thanks
SriYenta: ISA IRQ mask
0x0cf0, PCI irq 169 Socket status: 30000007
pcmcia: parent PCI bridge I/O window:0xa000-0xdfff
cs: IO port probe 0xa000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window:0xe4300000-0xe7ffffff
pcmcia: parent PCI bridge Memory window:0xe0000000-0xe3ffffff
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:03:00.0 to 64
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
Adding 1004020k swap on/dev/sda7. Priority:-1 extents:1 across:1004020k
##Here I get the "activating device mapper" on console##
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24)
initialised: [email protected]
loop: loaded (max 8 devices)
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
Quoted 8 lines
ReiserFS: sda6: Using r5 hash to sort names
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
Can you capture the boot log with another machine, either via serial console or netconsole?
(See Documentation/serial-console.txt or Documentation/networking/netconsole.txt).
If not, try booting with "initcall_debug" on the kernel boot line and post that boot log so we can see the last initcall that was made.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***