network interface to driver and pci slot mapping
Given an interface name (like eth0), how do I determine:
The name of the driver (module) for this interface. The PCI address for this interface, if relevant.
?
I need something that works non-destructively on a live system, that isn't broken by nameif, and has a strong chance of producing a correct result. In particular, parsing syslog is out. There's no consistency in the format of messages and there's no guarantee the logs from bootup will still be around. And the interface may have been renamed since then.
Quoted 4 lines · Anthony Samsung
Given an interface name (like eth0), how do I determine:
The name of the driver (module) for this interface. The PCI address for this interface, if relevant.
Quoted 8 lines
?
I need something that works non-destructively on a live system, that isn't broken by nameif, and has a strong chance of producing a correct result. In particular, parsing syslog is out. There's no consistency in the format of messages and there's no guarantee the logs from bootup will still be around. And the interface may have been renamed since then.
If the eth0 device is a module, it's in /etc/modprobe.conf, previous versions used /etc/modules.conf.
Once you have its module name you can use other resources like
/sys/bus/pci/drivers/MODULENAME
Cheers,
Dick Johnson
Penguin : Linux version 2.6.9 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by John Ashcroft.
98.36% of all statistics are fiction.
Quoted 5 lines · linux-os
If the eth0 device is a module, it's in
/etc/modprobe.conf, previous versions used/etc/modules.conf.
Once you have its module name you can use other resources like
/sys/bus/pci/drivers/MODULENAME
On my systems, hotplug loads the modules automatically, so there is no mention of them anywhere.
Signature · 2 lines
Måns Rullgård [email protected]
Quoted 7 lines · Måns Rullgård
Quoted 4 lines · linux-os
If the eth0 device is a module, it's in
/etc/modprobe.conf, previous versions used/etc/modules.conf.
Once you have its module name you can use other resources like
Quoted 5 lines
Quoted 1 line
/sys/bus/pci/drivers/MODULENAMEOn my systems, hotplug loads the modules automatically, so there is no mention of them anywhere.
Use ethtool.
Jeff
Quoted 3 lines · Anthony Samsung
Given an interface name (like eth0), how do I determine:
The name of the driver (module) for this interface. The PCI address for this interface, if relevant.
Use sysfs. All of this information is there (well, the driver link back to the module isn't there for most PCI drivers, but the functionality is there if the drivers are modified to support it...)
thanks,
greg k-h
Quoted 8 lines · Greg KH
Quoted 3 lines · Anthony Samsung
Given an interface name (like eth0), how do I determine:
The name of the driver (module) for this interface. The PCI address for this interface, if relevant.Use sysfs. All of this information is there (well, the driver link back to the module isn't there for most PCI drivers, but the functionality is there if the drivers are modified to support it...)
If you're going to use sysfs, libsysfs can help. It can be found in the sysfsutils package here:
http://linux-diag.sourceforge.net/Sysfsutils.html
[stekloff@... stekloff]$ systool -c net eth0 -D
Class = "net"
Class Device = "eth0"
Device = "0000:02:01.0"
Driver = "e1000"
Devices using "e1000" are:
Device = "0000:02:01.0"And more extended output:
[stekloff@... stekloff]$ systool -c net eth0 -v
Class = "net"
Class Device = "eth0"
Class Device path = "/sys/class/net/eth0"
addr_len = "6"
address = "00:0d:60:c9:42:06"
broadcast = "ff:ff:ff:ff:ff:ff"
features = "0x3a9"
flags = "0x1002"
ifindex = "6"
iflink = "6"
mtu = "1500"
tx_queue_len = "1000"
type = "1" Device = "0000:02:01.0"
Device path = "/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0"
class = "0x020000"
config = 86 80 1e 10 17 01 30 02 03 00 00 02 08 40
00 00
00 00 24 c0 00 00 20 c0 01 80 00 00 00 00
00 00
00 00 00 00 00 00 00 00 22 00 00 00 14 10
49 05
00 00 00 00 dc 00 00 00 00 00 00 00 0b 01
ff 00
detach_state = "0"
device = "0x101e"
irq = "11"
resource = "0x00000000c0240000 0x00000000c025ffff0x00000000000002000x00000000c0200000 0x00000000c020ffff 0x0000000000000200 0x0000000000008000 0x000000000000803f 0x0000000000000101 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000000ffff 0x0000000000007200"
subsystem_device = "0x0549"
subsystem_vendor = "0x1014"
vendor = "0x8086" Driver = "e1000"
Driver path = "/sys/bus/pci/drivers/e1000"
new_id = <store method only>
Devices using "e1000" are:
"0000:02:01.0"Thanks,
Dan