Skip to contentSkip to conversation

Filters not working

LARTC Scott Gagon 1 participant 1 message Mar 2, 2004

lore
Share & tools
lore
#0 lore raw

Thanks! Your suggestion didn't exactly work, but it led me to experiment with the prio statements on the filters too. Changing them so they have unique prio statements appears to have fixed the problem.

Thanks again!

Signature · 2 lines
Best regards,
 Scott                            mailto:[email protected]

Monday, March 1, 2004, 2:20:36 PM, you wrote:

JA> Hy.

JA> The solution I am going to give you might seem strange, but it worked JA> with me on a project I'm working and hope to release soon.

Quoted 7 lines · JA> Scott Gagon wrote:
Quoted 7 lines

tc class add dev $TC_DEV parent 1: classid 1:1 htb rate ${TC_UPLINK}kbit burst 6k

# high prio class 1:10:

tc class add dev $TC_DEV parent 1:1 classid 1:10 htb rate ${TC_UPLINK}kbit burst 6k prio 1

JA> Remove the prio from your class configurations, it seem to cause some JA> strange problems (at least with me, but i can't use the last htb JA> version, mine is 3.1 something, can't check it now).

Quoted 2 lines
Quoted 2 lines

Thanks so much! I have to say, this has been a learning experience! :\

JA> Hope it helps.

JA> José Araújo

JA> _______________________________________________
JA> LARTC mailing list / [email protected]
JA> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/