Skip to contentSkip to conversation

bpf: fix raw_tp test run in preempt kernel

PATCH In review Song Liu 3 participants 5 messages Sep 30, 2020

Subsystems (3)
lore
Share & tools
lore

Song Liu

author
#0 lore raw

PATCH v2 1/1 bpf: fix raw_tp test run in preempt kernel

In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Fixes 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")

---
Changes v1 => v2:
1. Keep rcu_read_lock/unlock() in original places. (Alexei)
2. Use get_cpu() instead of smp_processor_id(). (Alexei)

---
 net/bpf/test_run.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)
net/bpf/test_run.c +8 -11
index fde5db93507c4..c1c30a9f76f34 100644
@@ -252,9 +252,7 @@ __bpf_prog_test_run_raw_tp(void *data)
 	struct bpf_raw_tp_test_run_info *info = data;
 
 	rcu_read_lock();
-	migrate_disable();
 	info->retval = BPF_PROG_RUN(info->prog, info->ctx);
-	migrate_enable();
 	rcu_read_unlock();
 }
 
@@ -266,6 +264,7 @@ int bpf_prog_test_run_raw_tp(struct bpf_prog *prog,
 	__u32 ctx_size_in = kattr->test.ctx_size_in;
 	struct bpf_raw_tp_test_run_info info;
 	int cpu = kattr->test.cpu, err = 0;
+	int current_cpu;
 
 	/* doesn't support data_in/out, ctx_out, duration, or repeat */
 	if (kattr->test.data_in || kattr->test.data_out ||
@@ -293,27 +292,25 @@ int bpf_prog_test_run_raw_tp(struct bpf_prog *prog,
 
 	info.prog = prog;
 
+	current_cpu = get_cpu();
 	if ((kattr->test.flags & BPF_F_TEST_RUN_ON_CPU) == 0 ||
-	    cpu == smp_processor_id()) {
+	    cpu == current_cpu) {
 		__bpf_prog_test_run_raw_tp(&info);
-	} else {
+	} else if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
 		/* smp_call_function_single() also checks cpu_online()
 		 * after csd_lock(). However, since cpu is from user
 		 * space, let's do an extra quick check to filter out
 		 * invalid value before smp_call_function_single().
 		 */
-		if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
 		err = -ENXIO;
-			goto out;
-		}
-
+	} else {
 		err = smp_call_function_single(cpu, __bpf_prog_test_run_raw_tp,
 					       &info, 1);
-		if (err)
-			goto out;
 	}
+	put_cpu();
 
-	if (copy_to_user(&uattr->test.retval, &info.retval, sizeof(u32)))
+	if (!err &&
+	    copy_to_user(&uattr->test.retval, &info.retval, sizeof(u32)))
 		err = -EFAULT;
 
 out:
Signature · 1 line
2.24.1
#1 lore raw
Quoted 22 lines · Song Liu

In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Quoted 8 lines
Fixes 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")

---
Changes v1 => v2:
1. Keep rcu_read_lock/unlock() in original places. (Alexei)
2. Use get_cpu() instead of smp_processor_id(). (Alexei)

Applying: bpf: fix raw_tp test run in preempt kernel Using index info to reconstruct a base tree...
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
error: Did you hand edit your patch?

author
#2 lore raw
Quoted 36 lines · Alexei Starovoitov
Quoted 22 lines · Song Liu

In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Quoted 8 lines
Fixes 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")

---
Changes v1 => v2:
1. Keep rcu_read_lock/unlock() in original places. (Alexei)
2. Use get_cpu() instead of smp_processor_id(). (Alexei)

Quoted 5 lines

Applying: bpf: fix raw_tp test run in preempt kernel Using index info to reconstruct a base tree...
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
error: Did you hand edit your patch?

This is so weird. I cannot apply it myself. :(

[localhost] g co -b bpf-next-temp
Switched to a new branch 'bpf-next-temp'

[localhost] g format-patch -b HEAD~1 --subject-prefix "PATCH v3 bpf-next" 0001-bpf-fix-raw_tp-test-run-in-preempt-kernel.patch

[localhost] g reset --hard HEAD~1
HEAD is now at b0efc216f5779 libbpf: Compile in PIC mode only for shared library case

[localhost] g am 0001-bpf-fix-raw_tp-test-run-in-preempt-kernel.patch
Applying: bpf: fix raw_tp test run in preempt kernel
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
Patch failed at 0001 bpf: fix raw_tp test run in preempt kernel
hint: Use 'git am --show-current-patch' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".

Any hint on how to fix this? Alternatively, could you please pull the change from

https://git.kernel.org/pub/scm/linux/kernel/git/song/linux.git raw_tp_preempt_fix

Thanks,
Song

#3 lore raw
Quoted 42 lines · Song Liu
Quoted 36 lines · Alexei Starovoitov
Quoted 22 lines · Song Liu

In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Quoted 8 lines
Fixes 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")

---
Changes v1 => v2:
1. Keep rcu_read_lock/unlock() in original places. (Alexei)
2. Use get_cpu() instead of smp_processor_id(). (Alexei)

Quoted 5 lines

Applying: bpf: fix raw_tp test run in preempt kernel Using index info to reconstruct a base tree...
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
error: Did you hand edit your patch?

Quoted 7 lines

This is so weird. I cannot apply it myself. :(

[localhost] g co -b bpf-next-temp
Switched to a new branch 'bpf-next-temp'

[localhost] g format-patch -b HEAD~1 --subject-prefix "PATCH v3 bpf-next" 0001-bpf-fix-raw_tp-test-run-in-preempt-kernel.patch

could you try without -b ?

Quoted 12 lines

[localhost] g reset --hard HEAD~1
HEAD is now at b0efc216f5779 libbpf: Compile in PIC mode only for shared library case

[localhost] g am 0001-bpf-fix-raw_tp-test-run-in-preempt-kernel.patch
Applying: bpf: fix raw_tp test run in preempt kernel
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
Patch failed at 0001 bpf: fix raw_tp test run in preempt kernel
hint: Use 'git am --show-current-patch' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".

very odd indeed.

Quoted 4 lines

Any hint on how to fix this? Alternatively, could you please pull the change from

https://git.kernel.org/pub/scm/linux/kernel/git/song/linux.git raw_tp_preempt_fix

pulled. thanks

author
#4 lore raw
Quoted 44 lines · Alexei Starovoitov
Quoted 39 lines · Song Liu
Quoted 39 lines · Alexei Starovoitov
Quoted 22 lines · Song Liu

In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Quoted 8 lines
Fixes 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")

---
Changes v1 => v2:
1. Keep rcu_read_lock/unlock() in original places. (Alexei)
2. Use get_cpu() instead of smp_processor_id(). (Alexei)

Applying: bpf: fix raw_tp test run in preempt kernel Using index info to reconstruct a base tree...
error: patch failed: net/bpf/test_run.c:293
error: net/bpf/test_run.c: patch does not apply
error: Did you hand edit your patch?

Quoted 7 lines
Quoted 5 lines

This is so weird. I cannot apply it myself. :(
[localhost] g co -b bpf-next-temp
Switched to a new branch 'bpf-next-temp'
[localhost] g format-patch -b HEAD~1 --subject-prefix "PATCH v3 bpf-next" 0001-bpf-fix-raw_tp-test-run-in-preempt-kernel.patch

could you try without -b ?

Yes! -b is the problem here.

I think the right way to format-patch is to use --ignore-space-at-eol instead of -b.

Thanks,
Song