Skip to contentSkip to conversation

the scheduled removal of the frame diverter

PATCH Applied Adrian Bunk 3 participants 3 messages Nov 13, 2006 – Nov 14, 2006

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 the scheduled removal of the frame diverter

This patch contains the scheduled removal of the frame diverter.

---

 Documentation/feature-removal-schedule.txt |   15 
 drivers/net/Space.c                        |    1 
 include/linux/Kbuild                       |    1 
 include/linux/divert.h                     |  132 -----
 include/linux/netdevice.h                  |    6 
 include/linux/sockios.h                    |    4 
 net/Kconfig                                |   27 -
 net/core/Makefile                          |    1 
 net/core/dev.c                             |   20 
 net/core/dv.c                              |  546 ---------------------
 net/core/sysctl_net_core.c                 |   14 
 net/socket.c                               |    6 
 12 files changed, 6 insertions(+), 767 deletions(-)
Documentation/feature-removal-schedule.txt renamed from Documentation/feature-removal-schedule.txt.old +0 -15
@@ -219,21 +219,6 @@ Who:	Patrick McHardy <[email protected]>
 
 ---------------------------
 
-What:	frame diverter
-When:	November 2006
-Why:	The frame diverter is included in most distribution kernels, but is
-	broken. It does not correctly handle many things:
-	- IPV6
-	- non-linear skb's
-	- network device RCU on removal
-	- input frames not correctly checked for protocol errors
-	It also adds allocation overhead even if not enabled.
-	It is not clear if anyone is still using it.
-Who:	Stephen Hemminger <[email protected]>
-
----------------------------
-
-
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
 When:	October 2008
 Why:	The stacking of class devices makes these values misleading and
net/Kconfig renamed from net/Kconfig.old +0 -27
@@ -175,33 +175,6 @@ source "net/ipx/Kconfig"
 source "drivers/net/appletalk/Kconfig"
 source "net/x25/Kconfig"
 source "net/lapb/Kconfig"
-
-config NET_DIVERT
-	bool "Frame Diverter (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && BROKEN
-	---help---
-	  The Frame Diverter allows you to divert packets from the
-	  network, that are not aimed at the interface receiving it (in
-	  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
-	  with the Frames Diverter on, can do some *really* transparent www
-	  caching using a Squid proxy for example.
-
-	  This is very useful when you don't want to change your router's
-	  config (or if you simply don't have access to it).
-
-	  The other possible usages of diverting Ethernet Frames are
-	  numberous:
-	  - reroute smtp traffic to another interface
-	  - traffic-shape certain network streams
-	  - transparently proxy smtp connections
-	  - etc...
-
-	  For more informations, please refer to:
-	  <http://diverter.sourceforge.net/>
-	  <http://perso.wanadoo.fr/magpie/EtherDivert.html>
-
-	  If unsure, say N.
-
 source "net/econet/Kconfig"
 source "net/wanrouter/Kconfig"
 source "net/sched/Kconfig"
net/core/Makefile renamed from net/core/Makefile.old +0 -1
@@ -12,7 +12,6 @@ obj-y		     += dev.o ethtool.o dev_mcast
 
 obj-$(CONFIG_XFRM) += flow.o
 obj-$(CONFIG_SYSFS) += net-sysfs.o
-obj-$(CONFIG_NET_DIVERT) += dv.o
 obj-$(CONFIG_NET_PKTGEN) += pktgen.o
 obj-$(CONFIG_WIRELESS_EXT) += wireless.o
 obj-$(CONFIG_NETPOLL) += netpoll.o
include/linux/netdevice.h renamed from include/linux/netdevice.h.old +0 -6
@@ -38,7 +38,6 @@
 #include <linux/percpu.h>
 #include <linux/dmaengine.h>
 
-struct divert_blk;
 struct vlan_group;
 struct ethtool_ops;
 struct netpoll_info;
@@ -515,11 +514,6 @@ struct net_device
 	/* bridge stuff */
 	struct net_bridge_port	*br_port;
 
-#ifdef CONFIG_NET_DIVERT
-	/* this will get initialized at each interface type init routine */
-	struct divert_blk	*divert;
-#endif /* CONFIG_NET_DIVERT */
-
 	/* class/net/name entry */
 	struct device		dev;
 	/* space for optional statistics and wireless sysfs groups */
include/linux/sockios.h renamed from include/linux/sockios.h.old +2 -2
@@ -72,8 +72,8 @@
 #define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
 #define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
 
-#define SIOCGIFDIVERT	0x8944		/* Frame diversion support */
-#define SIOCSIFDIVERT	0x8945		/* Set frame diversion options */
+/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
+/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
 
 #define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
 
include/linux/Kbuild renamed from include/linux/Kbuild.old +0 -1
@@ -193,7 +193,6 @@ unifdef-y += cuda.h
 unifdef-y += cyclades.h
 unifdef-y += dccp.h
 unifdef-y += dirent.h
-unifdef-y += divert.h
 unifdef-y += dlm.h
 unifdef-y += elfcore.h
 unifdef-y += errno.h
net/core/sysctl_net_core.c renamed from net/core/sysctl_net_core.c.old +0 -14
@@ -21,10 +21,6 @@ extern __u32 sysctl_rmem_max;
 
 extern int sysctl_core_destroy_delay;
 
-#ifdef CONFIG_NET_DIVERT
-extern char sysctl_divert_version[];
-#endif /* CONFIG_NET_DIVERT */
-
 #ifdef CONFIG_XFRM
 extern u32 sysctl_xfrm_aevent_etime;
 extern u32 sysctl_xfrm_aevent_rseqth;
@@ -105,16 +101,6 @@ ctl_table core_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec
 	},
-#ifdef CONFIG_NET_DIVERT
-	{
-		.ctl_name	= NET_CORE_DIVERT_VERSION,
-		.procname	= "divert_version",
-		.data		= (void *)sysctl_divert_version,
-		.maxlen		= 32,
-		.mode		= 0444,
-		.proc_handler	= &proc_dostring
-	},
-#endif /* CONFIG_NET_DIVERT */
 #ifdef CONFIG_XFRM
 	{
 		.ctl_name	= NET_CORE_AEVENT_ETIME,
net/core/dev.c renamed from net/core/dev.c.old +4 -16
@@ -98,7 +98,6 @@
 #include <linux/seq_file.h>
 #include <linux/stat.h>
 #include <linux/if_bridge.h>
-#include <linux/divert.h>
 #include <net/dst.h>
 #include <net/pkt_sched.h>
 #include <net/checksum.h>
@@ -1827,8 +1826,6 @@ int netif_receive_skb(struct sk_buff *sk
 ncls:
 #endif
 
-	handle_diverter(skb);
-
 	if (handle_bridge(&skb, &pt_prev, &ret, orig_dev))
 		goto out;
 
@@ -2898,10 +2895,6 @@ int register_netdevice(struct net_device
 	spin_lock_init(&dev->ingress_lock);
 #endif
 
-	ret = alloc_divert_blk(dev);
-	if (ret)
-		goto out;
-
 	dev->iflink = -1;
 
 	/* Init, if this function is available */
@@ -2910,13 +2903,13 @@ int register_netdevice(struct net_device
 		if (ret) {
 			if (ret > 0)
 				ret = -EIO;
-			goto out_err;
+			goto out;
 		}
 	}
  
 	if (!dev_valid_name(dev->name)) {
 		ret = -EINVAL;
-		goto out_err;
+		goto out;
 	}
 
 	dev->ifindex = dev_new_index();
@@ -2930,7 +2923,7 @@ int register_netdevice(struct net_device
 			= hlist_entry(p, struct net_device, name_hlist);
 		if (!strncmp(d->name, dev->name, IFNAMSIZ)) {
 			ret = -EEXIST;
- 			goto out_err;
+ 			goto out;
 		}
  	}
 
@@ -2974,7 +2967,7 @@ int register_netdevice(struct net_device
 
 	ret = netdev_register_sysfs(dev);
 	if (ret)
-		goto out_err;
+		goto out;
 	dev->reg_state = NETREG_REGISTERED;
 
 	/*
@@ -3001,9 +2994,6 @@ int register_netdevice(struct net_device
 
 out:
 	return ret;
-out_err:
-	free_divert_blk(dev);
-	goto out;
 }
 
 /**
@@ -3329,8 +3319,6 @@ int unregister_netdevice(struct net_devi
 	/* Notifier chain MUST detach us from master device. */
 	BUG_TRAP(!dev->master);
 
-	free_divert_blk(dev);
-
 	/* Finish processing unregister after unlock */
 	net_set_todo(dev);
 
net/socket.c renamed from net/socket.c.old +0 -6
@@ -77,7 +77,6 @@
 #include <linux/cache.h>
 #include <linux/module.h>
 #include <linux/highmem.h>
-#include <linux/divert.h>
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
@@ -855,11 +854,6 @@ static long sock_ioctl(struct file *file
 				err = vlan_ioctl_hook(argp);
 			mutex_unlock(&vlan_ioctl_mutex);
 			break;
-		case SIOCGIFDIVERT:
-		case SIOCSIFDIVERT:
-			/* Convert this to call through a hook */
-			err = divert_ioctl(cmd, argp);
-			break;
 		case SIOCADDDLCI:
 		case SIOCDELDLCI:
 			err = -ENOPKG;
drivers/net/Space.c renamed from drivers/net/Space.c.old +0 -1
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/netlink.h>
-#include <linux/divert.h>
 
 /* A unified ethernet device probe.  This is the easiest way to have every
    ethernet adaptor have the name "eth[0123...]".
include/linux/divert.h deleted +0 -132

132 lines not on this page · raw message

net/core/dv.c deleted +0 -546

546 lines not on this page · raw message

#1 lore raw

net/Kconfig source "net/ipx/Kconfig" · line 187

Quoted 13 lines · Adrian Bunk

This patch contains the scheduled removal of the frame diverter.

[snip]

net/Kconfig renamed from net/Kconfig.old +0 -9
-config NET_DIVERT
-	bool "Frame Diverter (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && BROKEN
-	---help---
-	  The Frame Diverter allows you to divert packets from the
-	  network, that are not aimed at the interface receiving it (in
-	  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
-	  with the Frames Diverter on, can do some *really* transparent www
-	  caching using a Squid proxy for example.

From my understanding of iptables/ebtables, identical functionality is already avaialble within that framework; and as such this patch is just removing broken experimental and redundant code. The IPTables code also properly handles IPv6 and all the other old warts of the frame diverter as well. I agree that this should go.

Cheers,
Kyle Moffett