How to handle Bad Block relocation with LVM?
hello,
quite old thread - but damn interesting, though :)
Quoted 2 lines
Having the PE number, you can easily do
pvmove /dev/broken:PE/dev/somewhere-else
does somebody know if it's possible to easily remap a PE with standard lvm tools,
instead of pvmoving it ?
trying to move data off from defective sectors can need a very long time, especially
when multiple sectors being affected and if the disks are desktop drives.
let's think of some "re-partitioning" tool which sets up lvm on top of a disk with bad
sectors and which scans/skips&remaps megabyte sized PE's to some spare area, before the
disk is being used. badblock remapping at the os level instead at the disks controller
level.
yes, most of you will tell it's a bad idea but i have a cabinet full of disks with bad
sectors and i'd be really be curious how good and how long a zfs raidz would work on top
of such "badblocks lvm". at least, i'd like to experiment with that. let's call it
academical project for learning purpose and for demonstration of lvm strength :D
such "remapping" could look like this:
# pvs --segments -ovg_name,lv_name,seg_start_pe,seg_size_pe,pvseg_start -O pvseg_start -S vg_name=VGloop0 VG LV Start SSize Start VGloop0 blocks_good 0 4 0 VGloop0 blocks_bad 1 1 4 VGloop0 blocks_good 5 195 5 VGloop0 blocks_bad 2 1 200 VGloop0 blocks_good 201 699 201 VGloop0 blocks_spare 0 120 900 VGloop0 blocks_good 200 1 1020 VGloop0 blocks_good 4 1 1021 VGloop0 blocks_bad 0 1 1022
blocks_good is LV with healty PE's, blocks_bad is LV with bad PE's and blocks_spare is LV
where you take healthy PE's from as a replacement for bad PE's found in blocks_good LV
roland
sysadmin
Quoted 5 lines
linux-lvm] How to handle Bad Block relocation with LVM? Lars Ellenberg lars.ellenberg at linbit.com Thu Nov 29 14:04:01 UTC 2012
Previous message (by thread): [linux-lvm] How to handle Bad Block
relocation with LVM?
Quoted 1 line
Next message (by thread): [linux-lvm] How to handle Bad Block
relocation with LVM?
Quoted 23 lines
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Quoted 13 lines · Brian J. Murrell
Quoted 2 lines · Zdenek Kabelac
Sorry, no automated tool.
Pity,
Quoted 2 lines
You could possibly pvmove separated PEs manually with set of pvmove commands.
So, is the basic premise to just find the PE that is sitting on a bad block and just pvmove it into an LV created just for the purpose of holding PEs that are on bad blocks?
Quoted 6 lines
So what happens when I pvmove a PE out of an LV? I take it LVM moves the data (or at least tries in this case) on the PE being pvmoved onto another PE before moving it?
Oh, but wait. pvmove (typically) moves PEs between physical volumes. Can it be used to remap PEs like this?
Quoted 6 lines
So what do you know?
You either know that pysical sector P on some physical disk is broken. Or you know that logical sector L in some logical volume is broken.If you do
pvs --unit s --segment -o
vg_name,lv_name,seg_start,seg_size,seg_start_pe,pe_start,seg_pe_ranges
Quoted 22 lines
That should give you all you need to transform them into each other, and to transform the sector number to PE number.
Having the PE number, you can easily do
pvmove /dev/broken:PE/dev/somewhere-elseOr with alloc anywhere even elsewhere on the same broken disk. # If you don't have an other PV available,
# but there are free "healthy" extents on the same PV: # pvmove --alloc anywhere /dev/broken:PE /dev/broken Which would likely not be the smartest idea ;-)You should then create one LV named e.g. "
BAD_BLOCKS", which you would create/extend to cover that bad PE, so that won't be re-allocated again later:
lvextend VG/BAD_BLOCKS -l +1 /dev/broken:PEBetter yet, pvchange -an
/dev/broken,
so it won't be used for new LVs anymore,
and pvmove/dev/brokencompletely to somewhere else.
Quoted 9 lines
So much for the theory, how I would try to do this. In case I would do this at all.
Which I probably won't, if I had an other PV available.;-)
I'm unsure how pvmove will handle IO errors, though.
Quoted 1 line
Quoted 1 line
But I'd strongly recommend to get rid of such broken driver
quickly then
Quoted 1 line
Quoted 1 line
Quoted 1 line
you loose any more data - IMHO it's the most efficient solution
cost &
Quoted 5 lines
Quoted 1 line
Quoted 1 line
time.
Right.
Lars
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/