Skip to contentSkip to conversation

udisks bump to version 2.8.4

PATCH New Giulio Benetti 2 participants 15 messages Feb 17, 2020 – Apr 12, 2020

lore
Share & tools
lore
#0 lore raw

cover udisks bump to version 2.8.4

Hi All,

this patchset bumps udisks version to 2.8.4 while adding new packages required as dependencies:
- libbytesize
- volume_key
- libblockdev

Libblockdev requires gobject-introspection so I've taken pending Adam Duskett's patchset[1] to make it work. Also it needs Arnout Vandecappelle's "Introduce cross-bin directory" patchset[2].

[1]: https://patchwork.ozlabs.org/project/buildroot/list/?series=157909
[2]: https://patchwork.ozlabs.org/project/buildroot/list/?series=156716

All packages have been tested succesfully with ./utils/test-pkg -a

Giulio Benetti (4):
package/libbytesize: add new package
package/volume_key: add new package
package/libblockdev: add new package
package/udisks: bump version to 2.8.4

 DEVELOPERS                                    |  4 +
 package/Config.in                             |  3 +
 package/libblockdev/Config.in                 | 22 +++++
 package/libblockdev/libblockdev.hash          |  3 +
 package/libblockdev/libblockdev.mk            | 40 +++++++++
 package/libbytesize/Config.in                 | 10 +++
 package/libbytesize/libbytesize.hash          |  3 +
 package/libbytesize/libbytesize.mk            | 15 ++++
 ...-fix-build-with-newer-glibc-versions.patch | 29 -------
 .../0002-Fix-systemd-service-file.patch       | 33 --------
 ...issue-with-missing-sys-sysmacros.h-i.patch | 81 -------------------
 package/udisks/Config.in                      | 31 ++++---
 package/udisks/udisks.hash                    |  4 +-
 package/udisks/udisks.mk                      | 23 ++++--
 ...ove-po-Makefile.in-entry-from-AC_CON.patch | 28 +++++++
 package/volume_key/Config.in                  | 19 +++++
 package/volume_key/volume_key.hash            |  3 +
 package/volume_key/volume_key.mk              | 22 +++++
 18 files changed, 209 insertions(+), 164 deletions(-)
 create mode 100644 package/libblockdev/Config.in
 create mode 100644 package/libblockdev/libblockdev.hash
 create mode 100644 package/libblockdev/libblockdev.mk
 create mode 100644 package/libbytesize/Config.in
 create mode 100644 package/libbytesize/libbytesize.hash
 create mode 100644 package/libbytesize/libbytesize.mk
 delete mode 100644 package/udisks/0001-fix-build-with-newer-glibc-versions.patch
 delete mode 100644 package/udisks/0002-Fix-systemd-service-file.patch
 delete mode 100644 package/udisks/0003-Fix-compilation-issue-with-missing-sys-sysmacros.h-i.patch
 create mode 100644 package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch
 create mode 100644 package/volume_key/Config.in
 create mode 100644 package/volume_key/volume_key.hash
 create mode 100644 package/volume_key/volume_key.mk
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/4 package/libbytesize: add new package

Libbytesize is a tiny library providing a C "class" for working with arbitrary big sizes in bytes.

---
 DEVELOPERS                           |  1 +
 package/Config.in                    |  1 +
 package/libbytesize/Config.in        | 10 ++++++++++
 package/libbytesize/libbytesize.hash |  3 +++
 package/libbytesize/libbytesize.mk   | 15 +++++++++++++++
 5 files changed, 30 insertions(+)
 create mode 100644 package/libbytesize/Config.in
 create mode 100644 package/libbytesize/libbytesize.hash
 create mode 100644 package/libbytesize/libbytesize.mk
DEVELOPERS +1 -0
index 5991ee505a..6f2dbbb11a 100644
@@ -1009,6 +1009,7 @@ F:	package/xapian/
 
 N:	Giulio Benetti <[email protected]>
 F:	package/at/
+F:	package/libbytesize/
 F:	package/libnspr/
 F:	package/libnss/
 F:	package/minicom/
package/Config.in +1 -0
index 6201c5d2c7..4d76a5791f 100644
@@ -1782,6 +1782,7 @@ menu "Other"
 	source "package/libavl/Config.in"
 	source "package/libb64/Config.in"
 	source "package/libbsd/Config.in"
+	source "package/libbytesize/Config.in"
 	source "package/libcap/Config.in"
 	source "package/libcap-ng/Config.in"
 	source "package/libcgroup/Config.in"
package/libbytesize/Config.in new file +10 -0
new file mode 100644
index 0000000000..a3b086ccbc
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_LIBBYTESIZE
+	bool "libbytesize"
+	select BR2_PACKAGE_GMP
+	select BR2_PACKAGE_MPFR
+	select BR2_PACKAGE_PCRE2
+	help
+	  A tiny library providing a C "class" for working with
+	  arbitrary big sizes in bytes.
+
+	  https://github.com/storaged-project/libbytesize/
package/libbytesize/libbytesize.hash new file +3 -0
new file mode 100644
index 0000000000..2348ae2d25
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 e2063d5123fca5c347d561a032e406b9b72b94f3c30f7159bb4619c5aef02ef4  libbytesize-2.2.tar.gz
+sha256 97bdc721d875501b6243a456333fdfdb1ab64d31c4da2554de845caf4674b946  LICENSE
package/libbytesize/libbytesize.mk new file +15 -0
new file mode 100644
index 0000000000..65cde2a2fc
@@ -0,0 +1,15 @@
+################################################################################
+#
+# libbytesize
+#
+################################################################################
+
+LIBBYTESIZE_VERSION = 2.2
+LIBBYTESIZE_SITE = $(call github,storaged-project,libbytesize,$(LIBBYTESIZE_VERSION))
+LIBBYTESIZE_LICENSE = LGPL-2.1+
+LIBBYTESIZE_LICENSE_FILES = LICENSE
+LIBBYTESIZE_DEPENDENCIES = gmp mpfr pcre2 host-pkgconf
+LIBBYTESIZE_INSTALL_STAGING = YES
+LIBBYTESIZE_AUTORECONF = YES
+
+$(eval $(autotools-package))
Signature · 1 line
2.20.1
#2 lore raw

PATCH 1/4 package/libbytesize: add new package

Quoted 4 lines · On Mon, 17 Feb 2020 15:30:27 +0100 Giulio Benetti…

Libbytesize is a tiny library providing a C "class" for working with arbitrary big sizes in bytes.

Quoted 10 lines
---
 DEVELOPERS                           |  1 +
 package/Config.in                    |  1 +
 package/libbytesize/Config.in        | 10 ++++++++++
 package/libbytesize/libbytesize.hash |  3 +++
 package/libbytesize/libbytesize.mk   | 15 +++++++++++++++
 5 files changed, 30 insertions(+)
 create mode 100644 package/libbytesize/Config.in
 create mode 100644 package/libbytesize/libbytesize.hash
 create mode 100644 package/libbytesize/libbytesize.mk

Because the rest of the series has been marked as Changes Requested due to the feedback that was provided, I have also marked this particular patch as Changes Requested. It doesn't make a whole lot of sense to have this libbytesize library without the rest of the series.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH 2/4 package/volume_key: add new package

In reply to Giulio Benetti

The volume_key project provides a libvolume_key, a library for manipulating storage volume encryption keys and storing them separately from volumes, and an associated command-line tool, named volume_key.

---
 DEVELOPERS                                    |  1 +
 package/Config.in                             |  1 +
 ...ove-po-Makefile.in-entry-from-AC_CON.patch | 28 +++++++++++++++++++
 package/volume_key/Config.in                  | 19 +++++++++++++
 package/volume_key/volume_key.hash            |  3 ++
 package/volume_key/volume_key.mk              | 22 +++++++++++++++
 6 files changed, 74 insertions(+)
 create mode 100644 package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch
 create mode 100644 package/volume_key/Config.in
 create mode 100644 package/volume_key/volume_key.hash
 create mode 100644 package/volume_key/volume_key.mk
DEVELOPERS +1 -0
index 6f2dbbb11a..5276c09384 100644
@@ -1016,6 +1016,7 @@ F:	package/minicom/
 F:	package/nfs-utils/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/
+F:	package/volume_key/
 
 N:	Gregory Dymarek <[email protected]>
 F:	package/ding-libs/
package/Config.in +1 -0
index 4d76a5791f..a058d7d2f0 100644
@@ -1310,6 +1310,7 @@ menu "Crypto"
 	source "package/tpm2-tss/Config.in"
 	source "package/trousers/Config.in"
 	source "package/ustream-ssl/Config.in"
+	source "package/volume_key/Config.in"
 	source "package/wolfssl/Config.in"
 endmenu
 
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +28 -0
new file mode 100644
index 0000000000..44d6ee0d4b
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 7d3d27a..f4295ff 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -244,5 +244,5 @@ if test "$GCC" = yes ; then
+ fi
+ 
+ dnl po/Makefile
+-AC_CONFIG_FILES([Makefile contrib/Makefile doc/Makefile lib/Makefile po/Makefile.in python/Makefile python/python/Makefile python/python3/Makefile src/Makefile tests/Makefile])
++AC_CONFIG_FILES([Makefile contrib/Makefile doc/Makefile lib/Makefile python/Makefile python/python/Makefile python/python3/Makefile src/Makefile tests/Makefile])
+ AC_OUTPUT
+-- 
+2.20.1
+
package/volume_key/Config.in new file +19 -0
new file mode 100644
index 0000000000..0c0827253d
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_VOLUME_KEY
+	bool "volume_key"
+	depends on BR2_TOOLCHAIN_HAS_THREADS # cryptsetup, libassuan, libglib2, libgpgme, libnss
+	depends on BR2_USE_MMU # cryptsetup, libassuan, libglib2, libgpgme
+	depends on !BR2_STATIC_LIBS # cryptsetup, libnss
+	depends on BR2_TOOLCHAIN_HAS_SYNC_4 # cryptsetup
+	depends on BR2_USE_WCHAR # libglib2
+	depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgpgme, libassuan
+	select BR2_PACKAGE_CRYPTSETUP
+	select BR2_PACKAGE_LIBASSUAN
+	select BR2_PACKAGE_LIBGLIB2
+	select BR2_PACKAGE_LIBGPGME
+	select BR2_PACKAGE_LIBNSS
+	help
+	  The volume_key project provides a libvolume_key, a library for manipulating
+	  storage volume encryption keys and storing them separately from volumes, and an
+	  associated command-line tool, named volume_key.
+
+	  https://pagure.io/volume_key
package/volume_key/volume_key.hash new file +3 -0
new file mode 100644
index 0000000000..3925429b4e
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 f83146352464048f823c164e755dc10da0e06db024de5b1b6f78beeb8438dc22  volume_key-f56614199726ba1897d8687f0927535693b6603f.tar.gz
+sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
package/volume_key/volume_key.mk new file +22 -0
new file mode 100644
index 0000000000..8d5bff6d8e
@@ -0,0 +1,22 @@
+################################################################################
+#
+# volume_key
+#
+################################################################################
+
+VOLUME_KEY_VERSION = f56614199726ba1897d8687f0927535693b6603f
+VOLUME_KEY_SITE = https://pagure.io/volume_key.git
+VOLUME_KEY_SITE_METHOD = git
+VOLUME_KEY_LICENSE = GPL-2.0+
+VOLUME_KEY_LICENSE_FILES = COPYING
+VOLUME_KEY_DEPENDENCIES = cryptsetup libglib2 libgpgme libnss $(TARGET_NLS_DEPENDENCIES)
+VOLUME_KEY_INSTALL_STAGING = YES
+VOLUME_KEY_AUTORECONF = YES
+VOLUME_KEY_GETTEXTIZE = YES
+
+VOLUME_KEY_CONF_OPTS = --with-sysroot=$(STAGING_DIR) \
+		       --with-gpgme-prefix=$(STAGING_DIR)/usr \
+		       --without-python \
+		       --without-python3
+
+$(eval $(autotools-package))
Signature · 1 line
2.20.1
#4 lore raw

PATCH 2/4 package/volume_key: add new package

Hello,

DEVELOPERS F: package/minicom/ · line 1019

Quoted 9 lines · On Mon, 17 Feb 2020 15:30:28 +0100 Giulio Benetti…
DEVELOPERS +1 -0
index 6f2dbbb11a..5276c09384 100644
@@ -1016,6 +1016,7 @@ F:	package/minicom/
 F:	package/nfs-utils/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/
+F:	package/volume_key/

Would you mind naming the package volume-key instead of volume_key ?

Quoted 6 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +0 -0
new file mode 100644
index 0000000000..44d6ee0d4b

package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch line 10

Quoted 10 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +10 -0
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>

Was this reported upstream?

Quoted 15 lines
package/volume_key/Config.in new file +9 -0
new file mode 100644
index 0000000000..0c0827253d
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_VOLUME_KEY
+	bool "volume_key"
+	depends on BR2_TOOLCHAIN_HAS_THREADS # cryptsetup, libassuan, libglib2, libgpgme, libnss
+	depends on BR2_USE_MMU # cryptsetup, libassuan, libglib2, libgpgme
+	depends on !BR2_STATIC_LIBS # cryptsetup, libnss
+	depends on BR2_TOOLCHAIN_HAS_SYNC_4 # cryptsetup
+	depends on BR2_USE_WCHAR # libglib2
+	depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgpgme, libassuan
+	select BR2_PACKAGE_CRYPTSETUP

package/volume_key/Config.in line 19

Quoted 10 lines
package/volume_key/Config.in new file +10 -0
+	select BR2_PACKAGE_LIBASSUAN
+	select BR2_PACKAGE_LIBGLIB2
+	select BR2_PACKAGE_LIBGPGME
+	select BR2_PACKAGE_LIBNSS
+	help
+	  The volume_key project provides a libvolume_key, a library for manipulating
+	  storage volume encryption keys and storing them separately from volumes, and an
+	  associated command-line tool, named volume_key.
+
+	  https://pagure.io/volume_key

You need a Config.in comment about the (numerous) dependencies.

package/volume_key/volume_key.mk line 7

Quoted 13 lines
package/volume_key/volume_key.mk new file +7 -0
new file mode 100644
index 0000000000..8d5bff6d8e
@@ -0,0 +1,22 @@
+################################################################################
+#
+# volume_key
+#
+################################################################################
+
+VOLUME_KEY_VERSION = f56614199726ba1897d8687f0927535693b6603f

Why not use the 0.3.12 release ?

package/volume_key/volume_key.mk line 10

Quoted 3 lines
package/volume_key/volume_key.mk new file +3 -0
+VOLUME_KEY_SITE = https://pagure.io/volume_key.git
+VOLUME_KEY_SITE_METHOD = git
+VOLUME_KEY_LICENSE = GPL-2.0+

I don't see the "or later" option in any of the source files, so shouldn't this be GPL-2.0 ?

package/volume_key/volume_key.mk line 17

Quoted 7 lines
package/volume_key/volume_key.mk new file +7 -0
+VOLUME_KEY_LICENSE_FILES = COPYING
+VOLUME_KEY_DEPENDENCIES = cryptsetup libglib2 libgpgme libnss $(TARGET_NLS_DEPENDENCIES)
+VOLUME_KEY_INSTALL_STAGING = YES
+VOLUME_KEY_AUTORECONF = YES
+VOLUME_KEY_GETTEXTIZE = YES
+
+VOLUME_KEY_CONF_OPTS = --with-sysroot=$(STAGING_DIR) \

The --with-sysroot option always looks weird. What is this needed for ?

package/volume_key/volume_key.mk line 22

Quoted 5 lines
package/volume_key/volume_key.mk new file +5 -0
+		       --with-gpgme-prefix=$(STAGING_DIR)/usr \
+		       --without-python \
+		       --without-python3
+
+$(eval $(autotools-package))

In the configure.ac file, I see:

AC_PATH_PROG([GPG], [gpg2])
AC_ARG_VAR([GPG])
AC_DEFINE_UNQUOTED([GPG_PATH], "$GPG", [Path to the gpg2 executable])

So don't we need gnupg on the host for this to work ?

I see:

PKG_CHECK_MODULES(blkid, [blkid])

don't we need the blkid library from util-linux ? I see it is selected by cryptsetup, which is why it works.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#5 lore raw

PATCH 2/4 package/volume_key: add new package

Hi Thomas,

Quoted 5 lines · Thomas Petazzoni

Hello,

On Mon, 17 Feb 2020 15:30:28 +0100
Giulio Benetti <[email protected]> wrote:

Quoted 11 lines

DEVELOPERS F: package/minicom/ · line 1019

Quoted 9 lines
DEVELOPERS +1 -0
index 6f2dbbb11a..5276c09384 100644
@@ -1016,6 +1016,7 @@ F:	package/minicom/
  F:	package/nfs-utils/
  F:	package/sunxi-mali-mainline/
  F:	package/sunxi-mali-mainline-driver/
+F:	package/volume_key/

Would you mind naming the package volume-key instead of volume_key ?

Sure

Quoted 10 lines
Quoted 10 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +4 -0
new file mode 100644
index 0000000000..44d6ee0d4b
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
Quoted 8 lines

package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch line 10

Quoted 6 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +6 -0
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>

Was this reported upstream?

Not this patch, because the issue happens only when gettextizing, and if instead you build without getextizing it fails. So I don't think upstream will be interested about it, what do you think? This was a doubt I had while dealing with this.

Quoted 19 lines
Quoted 19 lines
package/volume_key/Config.in new file +13 -0
new file mode 100644
index 0000000000..0c0827253d
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_VOLUME_KEY
+	bool "volume_key"
+	depends on BR2_TOOLCHAIN_HAS_THREADS # cryptsetup, libassuan, libglib2, libgpgme, libnss
+	depends on BR2_USE_MMU # cryptsetup, libassuan, libglib2, libgpgme
+	depends on !BR2_STATIC_LIBS # cryptsetup, libnss
+	depends on BR2_TOOLCHAIN_HAS_SYNC_4 # cryptsetup
+	depends on BR2_USE_WCHAR # libglib2
+	depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgpgme, libassuan
+	select BR2_PACKAGE_CRYPTSETUP
+	select BR2_PACKAGE_LIBASSUAN
+	select BR2_PACKAGE_LIBGLIB2
+	select BR2_PACKAGE_LIBGPGME
+	select BR2_PACKAGE_LIBNSS
Quoted 8 lines

package/volume_key/Config.in line 19

Quoted 6 lines
package/volume_key/Config.in new file +6 -0
+	help
+	  The volume_key project provides a libvolume_key, a library for manipulating
+	  storage volume encryption keys and storing them separately from volumes, and an
+	  associated command-line tool, named volume_key.
+
+	  https://pagure.io/volume_key

You need a Config.in comment about the (numerous) dependencies.

Oh yes,completely forgotten!

Quoted 7 lines
Quoted 7 lines
package/volume_key/volume_key.mk new file +1 -0
new file mode 100644
index 0000000000..8d5bff6d8e
@@ -0,0 +1,22 @@
+################################################################################
Quoted 8 lines

package/volume_key/volume_key.mk line 7

Quoted 6 lines
package/volume_key/volume_key.mk new file +6 -0
+#
+# volume_key
+#
+################################################################################
+
+VOLUME_KEY_VERSION = f56614199726ba1897d8687f0927535693b6603f

Why not use the 0.3.12 release ?

Right

Quoted 5 lines

package/volume_key/volume_key.mk line 10

Quoted 3 lines
package/volume_key/volume_key.mk new file +3 -0
+VOLUME_KEY_SITE = https://pagure.io/volume_key.git
+VOLUME_KEY_SITE_METHOD = git
+VOLUME_KEY_LICENSE = GPL-2.0+

I don't see the "or later" option in any of the source files, so shouldn't this be GPL-2.0 ?

Right

Quoted 9 lines

package/volume_key/volume_key.mk line 17

Quoted 7 lines
package/volume_key/volume_key.mk new file +7 -0
+VOLUME_KEY_LICENSE_FILES = COPYING
+VOLUME_KEY_DEPENDENCIES = cryptsetup libglib2 libgpgme libnss $(TARGET_NLS_DEPENDENCIES)
+VOLUME_KEY_INSTALL_STAGING = YES
+VOLUME_KEY_AUTORECONF = YES
+VOLUME_KEY_GETTEXTIZE = YES
+
+VOLUME_KEY_CONF_OPTS = --with-sysroot=$(STAGING_DIR) \

The --with-sysroot option always looks weird. What is this needed for ?

This is a mistake, it's been left there after several tries. Sorry.

Quoted 8 lines

package/volume_key/volume_key.mk line 22

Quoted 5 lines
package/volume_key/volume_key.mk new file +5 -0
+		       --with-gpgme-prefix=$(STAGING_DIR)/usr \
+		       --without-python \
+		       --without-python3
+
+$(eval $(autotools-package))

In the configure.ac file, I see:

Quoted 5 lines

AC_PATH_PROG([GPG], [gpg2])
AC_ARG_VAR([GPG])
AC_DEFINE_UNQUOTED([GPG_PATH], "$GPG", [Path to the gpg2 executable])

So don't we need gnupg on the host for this to work ?

Yes, host-gnupg2, I've missed it since my distro provides it.

Quoted 6 lines

I see:

PKG_CHECK_MODULES(blkid, [blkid])

don't we need the blkid library from util-linux ? I see it is selected by cryptsetup, which is why it works.

Yes, but if cryptsetup already selects it, do I need to repeat it in volume-key dependencies?

Best regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
#6 lore raw

PATCH 2/4 package/volume_key: add new package

Quoted 122 lines · Giulio Benetti

Hi Thomas,

Quoted 5 lines · Thomas Petazzoni

Hello,

On Mon, 17 Feb 2020 15:30:28 +0100
Giulio Benetti <[email protected]> wrote:

Quoted 11 lines

DEVELOPERS F: package/minicom/ · line 1019

Quoted 9 lines
DEVELOPERS +1 -0
index 6f2dbbb11a..5276c09384 100644
@@ -1016,6 +1016,7 @@ F:	package/minicom/
   F:	package/nfs-utils/
   F:	package/sunxi-mali-mainline/
   F:	package/sunxi-mali-mainline-driver/
+F:	package/volume_key/

Would you mind naming the package volume-key instead of volume_key ?

Sure

Quoted 10 lines
Quoted 10 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +4 -0
new file mode 100644
index 0000000000..44d6ee0d4b
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
Quoted 8 lines

package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch line 10

Quoted 6 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +6 -0
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>

Was this reported upstream?

Not this patch, because the issue happens only when gettextizing, and if instead you build without getextizing it fails. So I don't think upstream will be interested about it, what do you think? This was a doubt I had while dealing with this.

Quoted 19 lines
Quoted 19 lines
package/volume_key/Config.in new file +13 -0
new file mode 100644
index 0000000000..0c0827253d
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_VOLUME_KEY
+	bool "volume_key"
+	depends on BR2_TOOLCHAIN_HAS_THREADS # cryptsetup, libassuan, libglib2, libgpgme, libnss
+	depends on BR2_USE_MMU # cryptsetup, libassuan, libglib2, libgpgme
+	depends on !BR2_STATIC_LIBS # cryptsetup, libnss
+	depends on BR2_TOOLCHAIN_HAS_SYNC_4 # cryptsetup
+	depends on BR2_USE_WCHAR # libglib2
+	depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgpgme, libassuan
+	select BR2_PACKAGE_CRYPTSETUP
+	select BR2_PACKAGE_LIBASSUAN
+	select BR2_PACKAGE_LIBGLIB2
+	select BR2_PACKAGE_LIBGPGME
+	select BR2_PACKAGE_LIBNSS
Quoted 8 lines

package/volume_key/Config.in line 19

Quoted 6 lines
package/volume_key/Config.in new file +6 -0
+	help
+	  The volume_key project provides a libvolume_key, a library for manipulating
+	  storage volume encryption keys and storing them separately from volumes, and an
+	  associated command-line tool, named volume_key.
+
+	  https://pagure.io/volume_key

You need a Config.in comment about the (numerous) dependencies.

Oh yes,completely forgotten!

Quoted 7 lines
Quoted 7 lines
package/volume_key/volume_key.mk new file +1 -0
new file mode 100644
index 0000000000..8d5bff6d8e
@@ -0,0 +1,22 @@
+################################################################################
Quoted 8 lines

package/volume_key/volume_key.mk line 7

Quoted 6 lines
package/volume_key/volume_key.mk new file +6 -0
+#
+# volume_key
+#
+################################################################################
+
+VOLUME_KEY_VERSION = f56614199726ba1897d8687f0927535693b6603f

Why not use the 0.3.12 release ?

Right

Quoted 5 lines

package/volume_key/volume_key.mk line 10

Quoted 3 lines
package/volume_key/volume_key.mk new file +3 -0
+VOLUME_KEY_SITE = https://pagure.io/volume_key.git
+VOLUME_KEY_SITE_METHOD = git
+VOLUME_KEY_LICENSE = GPL-2.0+

I don't see the "or later" option in any of the source files, so shouldn't this be GPL-2.0 ?

Right

Quoted 9 lines

package/volume_key/volume_key.mk line 17

Quoted 7 lines
package/volume_key/volume_key.mk new file +7 -0
+VOLUME_KEY_LICENSE_FILES = COPYING
+VOLUME_KEY_DEPENDENCIES = cryptsetup libglib2 libgpgme libnss $(TARGET_NLS_DEPENDENCIES)
+VOLUME_KEY_INSTALL_STAGING = YES
+VOLUME_KEY_AUTORECONF = YES
+VOLUME_KEY_GETTEXTIZE = YES
+
+VOLUME_KEY_CONF_OPTS = --with-sysroot=$(STAGING_DIR) \

The --with-sysroot option always looks weird. What is this needed for ?

This is a mistake, it's been left there after several tries. Sorry.

Quoted 8 lines

package/volume_key/volume_key.mk line 22

Quoted 5 lines
package/volume_key/volume_key.mk new file +5 -0
+		       --with-gpgme-prefix=$(STAGING_DIR)/usr \
+		       --without-python \
+		       --without-python3
+
+$(eval $(autotools-package))

In the configure.ac file, I see:

Quoted 7 lines
Quoted 5 lines

AC_PATH_PROG([GPG], [gpg2])
AC_ARG_VAR([GPG])
AC_DEFINE_UNQUOTED([GPG_PATH], "$GPG", [Path to the gpg2 executable])

So don't we need gnupg on the host for this to work ?

Yes, host-gnupg2, I've missed it since my distro provides it.

I've retried building, gnupg2 only is supported but it's not mandatory to build. So as I can understand we can avoid adding host-gnupg2.

Quoted 4 lines
Quoted 4 lines

I see:

PKG_CHECK_MODULES(blkid, [blkid])

Quoted 8 lines
Quoted 2 lines

don't we need the blkid library from util-linux ? I see it is selected by cryptsetup, which is why it works.

Yes, but if cryptsetup already selects it, do I need to repeat it in volume-key dependencies?

Best regards

Best regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
#7 lore raw

PATCH 2/4 package/volume_key: add new package

Quoted 10 lines · On Tue, 18 Feb 2020 15:06:47 +0100 Giulio Benetti…
Quoted 7 lines
Quoted 5 lines

AC_PATH_PROG([GPG], [gpg2])
AC_ARG_VAR([GPG])
AC_DEFINE_UNQUOTED([GPG_PATH], "$GPG", [Path to the gpg2 executable])

So don't we need gnupg on the host for this to work ?

Yes, host-gnupg2, I've missed it since my distro provides it.

I've retried building, gnupg2 only is supported but it's not mandatory to build. So as I can understand we can avoid adding host-gnupg2.

Weird, I thought AC_PATH_PROG() was aborting if the tool was not found. If that's not the case, then we should ensure the build never uses gpg2, even if available, so that the build result doesn't depend on whether gpg2 is available system-wide or not.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#8 lore raw

PATCH 2/4 package/volume_key: add new package

Quoted 11 lines · Thomas Petazzoni
Quoted 8 lines · On Tue, 18 Feb 2020 15:06:47 +0100 Giulio Benetti…
Quoted 7 lines
Quoted 5 lines

AC_PATH_PROG([GPG], [gpg2])
AC_ARG_VAR([GPG])
AC_DEFINE_UNQUOTED([GPG_PATH], "$GPG", [Path to the gpg2 executable])

So don't we need gnupg on the host for this to work ?

Yes, host-gnupg2, I've missed it since my distro provides it.

Quoted 7 lines
Quoted 2 lines

I've retried building, gnupg2 only is supported but it's not mandatory to build. So as I can understand we can avoid adding host-gnupg2.

Weird, I thought AC_PATH_PROG() was aborting if the tool was not found. If that's not the case, then we should ensure the build never uses gpg2, even if available, so that the build result doesn't depend on whether gpg2 is available system-wide or not.

I went deeper in the volume_key code and found that gnupg2 is needed at runtime to create packet with passphrase, so even if build doesn't fail gnupg2 is needed at runtime. In gcr packet is the same.

But then, it turns out that gnupg2's binary name is gpg and not gpg2, but usually gpg2 name is used(i.e. on Ubuntu 19.10). Also in gcr package they assume its name is gpg2 but if you try to build you find gpg. Gnupg2 failure is difficult to find since it's at runtime(i.e. gpgme calls /usr/bin/gpg2 to encrypt/decrypt something).

So what do you suggest? Better change gpg binary file name to gpg2 or better fix gcr package to use /usr/bin/gpg instead of /usr/bin/gpg2 And do the same here with volume-key?

Gcr package is wrong in any case at the moment, so it must be fixed, and find someone who's able to test it.

Best regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
#9 lore raw

PATCH 2/4 package/volume_key: add new package

In reply to Giulio Benetti

Hello,

Quoted 19 lines · On Tue, 18 Feb 2020 14:46:17 +0100 Giulio Benetti…
Quoted 10 lines
Quoted 10 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +4 -0
new file mode 100644
index 0000000000..44d6ee0d4b
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
Quoted 8 lines

package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch line 10

Quoted 6 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +6 -0
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>  

Was this reported upstream?

Quoted 4 lines

Not this patch, because the issue happens only when gettextizing, and if instead you build without getextizing it fails. So I don't think upstream will be interested about it, what do you think? This was a doubt I had while dealing with this.

Well, it is a problem if one can't autoreconf/gettextize the upstream project as-is, no?

Quoted 9 lines
Quoted 6 lines

I see:

PKG_CHECK_MODULES(blkid, [blkid])

don't we need the blkid library from util-linux ? I see it is selected by cryptsetup, which is why it works.

Yes, but if cryptsetup already selects it, do I need to repeat it in volume-key dependencies?

I think since the configure.ac explicitly checks it, it makes sense to not rely on the fact that a dependency by chance also uses it.

Thanks,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#10 lore raw

PATCH 2/4 package/volume_key: add new package

Quoted 24 lines · Thomas Petazzoni

Hello,

Quoted 19 lines · On Tue, 18 Feb 2020 14:46:17 +0100 Giulio Benetti…
Quoted 18 lines
Quoted 6 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +0 -0
new file mode 100644
index 0000000000..44d6ee0d4b

package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch line 10

Quoted 10 lines
package/volume_key/0001-configure.ac-remove-po-Makefile.in-entry-from-AC_CON.patch new file +10 -0
@@ -0,0 +1,28 @@
+From d1142e667f4f2f2fcd2d36a006919325c1a4377e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti <[email protected]>
+Date: Sat, 25 Jan 2020 17:24:38 +0100
+Subject: [PATCH] configure.ac: remove po/Makefile.in entry from
+ AC_CONFIG_FILES
+
+AC_CONFIG_FILES should not contain po/Makefile.in file because
+gettextize will re-add it again causing build failure.
+
+Signed-off-by: Giulio Benetti <[email protected]>

Was this reported upstream?

Quoted 7 lines
Quoted 4 lines

Not this patch, because the issue happens only when gettextizing, and if instead you build without getextizing it fails. So I don't think upstream will be interested about it, what do you think? This was a doubt I had while dealing with this.

Well, it is a problem if one can't autoreconf/gettextize the upstream project as-is, no?

Yes, so let's keep it locally.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

I see:

PKG_CHECK_MODULES(blkid, [blkid])

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

don't we need the blkid library from util-linux ? I see it is selected by cryptsetup, which is why it works.

Yes, but if cryptsetup already selects it, do I need to repeat it in volume-key dependencies?

I think since the configure.ac explicitly checks it, it makes sense to not rely on the fact that a dependency by chance also uses it.

Ok then, it is the first time I add a package with so many dependencies.

Thank you
Best regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
#11 lore raw

PATCH 3/4 package/libblockdev: add new package

In reply to Giulio Benetti

Libblockdev is a library for manipulating block devices.

---
 DEVELOPERS                           |  1 +
 package/Config.in                    |  1 +
 package/libblockdev/Config.in        | 22 +++++++++++++++
 package/libblockdev/libblockdev.hash |  3 +++
 package/libblockdev/libblockdev.mk   | 40 ++++++++++++++++++++++++++++
 5 files changed, 67 insertions(+)
 create mode 100644 package/libblockdev/Config.in
 create mode 100644 package/libblockdev/libblockdev.hash
 create mode 100644 package/libblockdev/libblockdev.mk
DEVELOPERS +1 -0
index 5276c09384..514b850c08 100644
@@ -1009,6 +1009,7 @@ F:	package/xapian/
 
 N:	Giulio Benetti <[email protected]>
 F:	package/at/
+F:	package/libblockdev/
 F:	package/libbytesize/
 F:	package/libnspr/
 F:	package/libnss/
package/Config.in +1 -0
index a058d7d2f0..40118b58b0 100644
@@ -1456,6 +1456,7 @@ menu "Hardware handling"
 	source "package/let-me-create/Config.in"
 	source "package/libaio/Config.in"
 	source "package/libatasmart/Config.in"
+	source "package/libblockdev/Config.in"
 	source "package/libcec/Config.in"
 	source "package/libfreefare/Config.in"
 	source "package/libftdi/Config.in"
package/libblockdev/Config.in new file +22 -0
new file mode 100644
index 0000000000..0b0a943d5f
@@ -0,0 +1,22 @@
+config BR2_PACKAGE_LIBBLOCKDEV
+	bool "libblockdev"
+	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_TOOLCHAIN_HAS_THREADS # volume_key -> cryptsetup
+	depends on BR2_USE_MMU # lvm2, volume_key -> cryptsetup
+	depends on !BR2_STATIC_LIBS # volume_key -> cryptsetup
+	depends on BR2_SYSTEM_ENABLE_NLS # volume_key
+	select BR2_PACKAGE_LIBBYTESIZE
+	select BR2_PACKAGE_LIBYAML
+	select BR2_PACKAGE_PARTED
+	select BR2_PACKAGE_VOLUME_KEY
+	select BR2_PACKAGE_UTIL_LINUX_LIBMOUNT
+	select BR2_PACKAGE_UTIL_LINUX
+	help
+	  libblockdev is a C library supporting GObject introspection for
+	  manipulation of block devices
+
+	  https://github.com/storaged-project/libblockdev/
+
+comment "libblockdev needs udev /dev management and a toolchain w/ threads"
+	depends on BR2_USE_MMU
+	depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_PACKAGE_HAS_UDEV
package/libblockdev/libblockdev.hash new file +3 -0
new file mode 100644
index 0000000000..0bf9a2c934
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 c5fc030474b44afcaedd8ea10388282534a6d5bb25488b780e645fbf0a6d4d80  libblockdev-2.23-1.tar.gz
+sha256 97bdc721d875501b6243a456333fdfdb1ab64d31c4da2554de845caf4674b946  LICENSE
package/libblockdev/libblockdev.mk new file +40 -0
new file mode 100644
index 0000000000..0dcab4c445
@@ -0,0 +1,40 @@
+################################################################################
+#
+# libblockdev
+#
+################################################################################
+
+LIBBLOCKDEV_VERSION = 2.23-1
+LIBBLOCKDEV_SITE = $(call github,storaged-project,libblockdev,$(LIBBLOCKDEV_VERSION))
+LIBBLOCKDEV_LICENSE = LGPL-2.1+
+LIBBLOCKDEV_LICENSE_FILES = LICENSE
+LIBBLOCKDEV_DEPENDENCIES = host-autoconf-archive host-pkgconf kmod \
+			   libbytesize libyaml parted udev util-linux \
+			   volume_key
+LIBBLOCKDEV_INSTALL_STAGING = YES
+LIBBLOCKDEV_AUTORECONF_OPTS = --include=$(HOST_DIR)/share/autoconf-archive
+LIBBLOCKDEV_AUTORECONF = YES
+
+LIBBLOCKDEV_CONF_OPTS = --without-nvdimm
+
+ifeq ($(BR2_PACKAGE_DMRAID),y)
+LIBBLOCKDEV_CONF_OPTS += --with-dmraid
+LIBBLOCKDEV_DEPENDENCIES += dmraid
+else
+LIBBLOCKDEV_CONF_OPTS += --without-dmraid
+endif
+
+ifeq ($(BR2_PACKAGE_GOBJECT_INTROSPECTION),y)
+LIBBLOCKDEV_CONF_OPTS += --enable-introspection=yes
+LIBBLOCKDEV_DEPENDENCIES += gobject-introspection
+else
+LIBBLOCKDEV_CONF_OPTS += --enable-introspection=no
+endif
+
+# Autoreconf requires an existing m4 directory
+define LIBBLOCKDEV_MKDIR_M4
+	mkdir -p $(@D)/m4
+endef
+LIBBLOCKDEV_POST_PATCH_HOOKS += LIBBLOCKDEV_MKDIR_M4
+
+$(eval $(autotools-package))
Signature · 1 line
2.20.1
#12 lore raw

PATCH 3/4 package/libblockdev: add new package

Hello,

package/libblockdev/Config.in line 6

Quoted 12 lines · On Mon, 17 Feb 2020 15:30:29 +0100 Giulio Benetti…
package/libblockdev/Config.in new file +6 -0
new file mode 100644
index 0000000000..0b0a943d5f
@@ -0,0 +1,22 @@
+config BR2_PACKAGE_LIBBLOCKDEV
+	bool "libblockdev"
+	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_TOOLCHAIN_HAS_THREADS # volume_key -> cryptsetup
+	depends on BR2_USE_MMU # lvm2, volume_key -> cryptsetup
+	depends on !BR2_STATIC_LIBS # volume_key -> cryptsetup

You're missing a few dependencies from volume-key:

+ depends on BR2_TOOLCHAIN_HAS_SYNC_4 # cryptsetup
+ depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgpgme, libassuan
+ depends on BR2_USE_WCHAR # libglib2

Could you double check ?

package/libblockdev/Config.in line 7

Quoted 1 line
package/libblockdev/Config.in new file +1 -0
+	depends on BR2_SYSTEM_ENABLE_NLS # volume_key

There is no such dependency in volume-key.

package/libblockdev/Config.in line 10

Quoted 3 lines
package/libblockdev/Config.in new file +3 -0
+	select BR2_PACKAGE_LIBBYTESIZE
+	select BR2_PACKAGE_LIBYAML
+	select BR2_PACKAGE_PARTED

This one depends on BR2_ENABLE_LOCALE

package/libblockdev/Config.in line 13

Quoted 3 lines
package/libblockdev/Config.in new file +3 -0
+	select BR2_PACKAGE_VOLUME_KEY
+	select BR2_PACKAGE_UTIL_LINUX_LIBMOUNT
+	select BR2_PACKAGE_UTIL_LINUX

Reverse the order of those last two lines.

package/libblockdev/Config.in line 22

Quoted 9 lines
package/libblockdev/Config.in new file +9 -0
+	help
+	  libblockdev is a C library supporting GObject introspection for
+	  manipulation of block devices
+
+	  https://github.com/storaged-project/libblockdev/
+
+comment "libblockdev needs udev /dev management and a toolchain w/ threads"
+	depends on BR2_USE_MMU
+	depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_PACKAGE_HAS_UDEV

This is not accurate considering the dependencies of BR2_PACKAGE_LIBBLOCKDEV.

package/libblockdev/Config.in

Quoted 7 lines
package/libblockdev/Config.in new file +7 -0
+LIBBLOCKDEV_VERSION = 2.23-1
+LIBBLOCKDEV_SITE = $(call github,storaged-project,libblockdev,$(LIBBLOCKDEV_VERSION))
+LIBBLOCKDEV_LICENSE = LGPL-2.1+
+LIBBLOCKDEV_LICENSE_FILES = LICENSE
+LIBBLOCKDEV_DEPENDENCIES = host-autoconf-archive host-pkgconf kmod \
+			   libbytesize libyaml parted udev util-linux \
+			   volume_key

kmod is used here, but not selected by the Config.in file. Indentation is also odd: you should have only one tab to indent the continuation lines.

package/libblockdev/Config.in

Quoted 2 lines
package/libblockdev/Config.in new file +2 -0
+LIBBLOCKDEV_INSTALL_STAGING = YES
+LIBBLOCKDEV_AUTORECONF_OPTS = --include=$(HOST_DIR)/share/autoconf-archive

I haven't followed the recent autoreconf rework, is this now the right way of using autoconf-archive macros ?

package/libblockdev/Config.in

Quoted 6 lines
package/libblockdev/Config.in new file +6 -0
+ifeq ($(BR2_PACKAGE_GOBJECT_INTROSPECTION),y)
+LIBBLOCKDEV_CONF_OPTS += --enable-introspection=yes
+LIBBLOCKDEV_DEPENDENCIES += gobject-introspection
+else
+LIBBLOCKDEV_CONF_OPTS += --enable-introspection=no
+endif

We don't have GOI support (yet).

package/libblockdev/Config.in

Quoted 5 lines
package/libblockdev/Config.in new file +5 -0
+# Autoreconf requires an existing m4 directory
+define LIBBLOCKDEV_MKDIR_M4
+	mkdir -p $(@D)/m4
+endef
+LIBBLOCKDEV_POST_PATCH_HOOKS += LIBBLOCKDEV_MKDIR_M4

So the change from Michael Walle that allows to drop this was not merged yet?

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#13 lore raw

PATCH 4/4 package/udisks: bump version to 2.8.4

In reply to Giulio Benetti

Bump to version 2.8.4 of udisks. All patches have been upstremed, so drop them all.

---
 DEVELOPERS                                    |  1 +
 ...-fix-build-with-newer-glibc-versions.patch | 29 -------
 .../0002-Fix-systemd-service-file.patch       | 33 --------
 ...issue-with-missing-sys-sysmacros.h-i.patch | 81 -------------------
 package/udisks/Config.in                      | 31 ++++---
 package/udisks/udisks.hash                    |  4 +-
 package/udisks/udisks.mk                      | 23 ++++--
 7 files changed, 38 insertions(+), 164 deletions(-)
 delete mode 100644 package/udisks/0001-fix-build-with-newer-glibc-versions.patch
 delete mode 100644 package/udisks/0002-Fix-systemd-service-file.patch
 delete mode 100644 package/udisks/0003-Fix-compilation-issue-with-missing-sys-sysmacros.h-i.patch
DEVELOPERS +1 -0
index 514b850c08..6aac009de4 100644
@@ -1018,6 +1018,7 @@ F:	package/nfs-utils/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/
 F:	package/volume_key/
+F:	package/udisks/
 
 N:	Gregory Dymarek <[email protected]>
 F:	package/ding-libs/
package/udisks/0001-fix-build-with-newer-glibc-versions.patch deleted +0 -29
deleted file mode 100644
index 336fc440a6..0000000000
@@ -1,29 +0,0 @@
-Fix build with newer glibc versions
-
-This patch has been backported from upstream:
-
-http://cgit.freedesktop.org/udisks/commit/?h=udisks1&id=9829152b12a8924d2e091a00133ed1a3a7ba75c0
-
-Signed-off-by: Vicente Olivert Riera <[email protected]>
-
-From 9829152b12a8924d2e091a00133ed1a3a7ba75c0 Mon Sep 17 00:00:00 2001
-From: Alexandre Rostovtsev <[email protected]>
-Date: Fri, 29 May 2015 21:09:39 -0400
-Subject: fix build with newer glibc versions
-
-https://bugs.freedesktop.org/show_bug.cgi?id=90778
-
-diff --git a/src/helpers/job-drive-detach.c b/src/helpers/job-drive-detach.c
-index eeafcab..d122a1f 100644
---- a/src/helpers/job-drive-detach.c
-+++ b/src/helpers/job-drive-detach.c
-@@ -18,6 +18,7 @@
-  *
-  */
- 
-+#include <sys/stat.h>
- #include <stdio.h>
- #include <string.h>
- #include <errno.h>
--- 
-cgit v0.10.2
package/udisks/0002-Fix-systemd-service-file.patch deleted +0 -33
deleted file mode 100644
index ea347aef73..0000000000
@@ -1,33 +0,0 @@
-From bf8b4362cef24a6f747e4329305a4939c8f585d1 Mon Sep 17 00:00:00 2001
-From: David King <[email protected]>
-Date: Thu, 2 Jul 2015 13:49:22 +0100
-Subject: [PATCH] Fix systemd service file
-
-udisks-daemon is installed to $(libexecdir), not $(prefix)/lib/udisks.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=1238664
-https://bugs.freedesktop.org/show_bug.cgi?id=91191
-
-[This patch has been backported from upstream:
-https://cgit.freedesktop.org/udisks/commit/?h=udisks1&id=bf8b4362cef24a6f747e4329305a4939c8f585d1]
-Signed-off-by: Pieterjan Camerlynck <[email protected]>
----
- data/Makefile.am | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/data/Makefile.am b/data/Makefile.am
-index 411ea0f..08af5f4 100644
---- a/data/Makefile.am
-+++ b/data/Makefile.am
-@@ -31,7 +31,7 @@ systemdservicedir       = $(systemdsystemunitdir)
- systemdservice_DATA     = $(systemdservice_in_files:.service.in=.service)
- 
- $(systemdservice_DATA): $(systemdservice_in_files) Makefile
--	@sed -e "s|\@libexecdir\@|$(prefix)/lib/udisks|" $< > $@
-+	@sed -e "s|\@libexecdir\@|$(libexecdir)|" $< > $@
- endif
- 
- udevrulesdir = $(slashlibdir)/udev/rules.d
--- 
-2.7.4
-
package/udisks/0003-Fix-compilation-issue-with-missing-sys-sysmacros.h-i.patch deleted +0 -81

81 lines not on this page · raw message

package/udisks/Config.in +19 -12
index 04a632dd8d..909b3c8bd4 100644
@@ -4,21 +4,27 @@ config BR2_PACKAGE_UDISKS
 	depends on BR2_HOST_GCC_AT_LEAST_4_9 # spidermonkey
 	depends on BR2_INSTALL_LIBSTDCPP # spidermonkey
 	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS # gobject-introspection
 	depends on BR2_PACKAGE_SPIDERMONKEY_ARCH_SUPPORTS # spidermonkey
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # spidermonkey
+	depends on BR2_SYSTEM_ENABLE_NLS # volume_key
+	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # spidermonkey, gobject-introspection
 	depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # polkit
-	depends on BR2_USE_MMU # lvm2
+	depends on BR2_USE_MMU # lvm2, gobject-introspection
 	depends on BR2_USE_WCHAR # dbus-glib -> glib2
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC # polkit, lvm2, parted
 	depends on !BR2_STATIC_LIBS # lvm2, spidermonkey
+	depends on BR2_TOOLCHAIN_USES_GLIBC
 	select BR2_PACKAGE_DBUS
 	select BR2_PACKAGE_DBUS_GLIB
-	select BR2_PACKAGE_SG3_UTILS
-	select BR2_PACKAGE_POLKIT
-	select BR2_PACKAGE_PARTED
-	select BR2_PACKAGE_LVM2
+	select BR2_PACKAGE_GOBJECT_INTROSPECTION
 	select BR2_PACKAGE_LIBATASMART
+	select BR2_PACKAGE_LIBBLOCKDEV
 	select BR2_PACKAGE_LIBGUDEV
+	select BR2_PACKAGE_LVM2
+	select BR2_PACKAGE_PARTED
+	select BR2_PACKAGE_POLKIT
+	select BR2_PACKAGE_SG3_UTILS
+	select BR2_PACKAGE_LIBXSLT
 	help
 	  The udisks project provides
 
@@ -36,24 +42,25 @@ if BR2_PACKAGE_UDISKS
 config BR2_PACKAGE_UDISKS_LVM2
 	bool "lvm2 support"
 	# The lvm app library can't compile against musl
-	depends on BR2_TOOLCHAIN_USES_GLIBC
 	select BR2_PACKAGE_LVM2_APP_LIBRARY
 	help
 	  Enable LVM2 support
 
-comment "lvm2 support needs a glibc toolchain"
-	depends on !BR2_TOOLCHAIN_USES_GLIBC
-
 endif
 
 comment "udisks needs udev /dev management"
 	depends on BR2_USE_MMU
 	depends on !BR2_PACKAGE_HAS_UDEV
 
-comment "udisks needs a glibc or musl toolchain with locale, C++, wchar, dynamic library, NPTL, gcc >= 4.9"
+comment "udisks support needs NLS enabled"
+	depends on !BR2_SYSTEM_ENABLE_NLS
+
+comment "udisks needs a glibc toolchain with locale, C++, wchar, dynamic library, NPTL, gcc >= 4.9"
 	depends on BR2_USE_MMU
 	depends on BR2_PACKAGE_SPIDERMONKEY_ARCH_SUPPORTS
-	depends on !BR2_ENABLE_LOCALE || BR2_TOOLCHAIN_USES_UCLIBC || \
+	depends on BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS
+	depends on !BR2_ENABLE_LOCALE || \
+		!BR2_TOOLCHAIN_USES_GLIBC || \
 		!BR2_INSTALL_LIBSTDCPP || \
 		BR2_STATIC_LIBS || \
 		!BR2_TOOLCHAIN_HAS_THREADS_NPTL || \
package/udisks/udisks.hash +2 -2
index b40161e323..f8947b0b09 100644
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 f2ec82eb0ea7e01dc299b5b29b3c18cdf861236ec43dcff66b3552b4b31c6f71  udisks-1.0.5.tar.gz
-sha256 7d30f41a79a9b453b4972a6d7e3425ff104b39232891bde8ba659f1adb21f771  COPYING
+sha256 d28367bdacfa039719327e68300b6118427874f2dc53ff7109dedb70a7289819  udisks-2.8.4.tar.bz2
+sha256 98046e932dc6c739001e79d7079a3bd958fc55475dcd917d27f884c0c93525cc  COPYING
package/udisks/udisks.mk +16 -7
index fe8932a92e..5b37ac3402 100644
@@ -4,28 +4,37 @@
 #
 ################################################################################
 
-UDISKS_VERSION = 1.0.5
-UDISKS_SITE = http://hal.freedesktop.org/releases
+UDISKS_VERSION = 2.8.4
+UDISKS_SOURCE = udisks-$(UDISKS_VERSION).tar.bz2
+UDISKS_SITE = https://github.com/storaged-project/udisks/releases/download/udisks-$(UDISKS_VERSION)
 UDISKS_LICENSE = GPL-2.0+
 UDISKS_LICENSE_FILES = COPYING
-# For 0002-Fix-systemd-service-file.patch
-UDISKS_AUTORECONF = YES
 
 UDISKS_DEPENDENCIES = \
 	sg3_utils \
+	host-autoconf-archive \
 	host-pkgconf \
+	host-gettext \
 	udev \
 	dbus \
 	dbus-glib \
 	polkit \
 	parted \
-	lvm2 \
 	libatasmart \
-	libgudev
+	libgudev \
+	libblockdev \
+	libxslt
 
-UDISKS_CONF_OPTS = --disable-remote-access --disable-man-pages
+UDISKS_CONF_OPTS = \
+	--disable-remote-access \
+	--disable-man \
+	--disable-btrfs \
+	--disable-iscsi \
+	--disable-lsm \
+	--disable-zram
 
 ifeq ($(BR2_PACKAGE_UDISKS_LVM2),y)
+UDISKS_DEPENDENCIES += lvm2
 UDISKS_CONF_OPTS += --enable-lvm2
 endif
 
Signature · 1 line
2.20.1
#14 lore raw

PATCH 4/4 package/udisks: bump version to 2.8.4

Quoted 2 lines · On Mon, 17 Feb 2020 15:30:30 +0100 Giulio Benetti…

Bump to version 2.8.4 of udisks. All patches have been upstremed, so drop them all.

Considering the complexity of the bump, it would be nice to have more details in the commit log.

package/udisks/Config.in config BR2_PACKAGE_UDISKS · line 9

Quoted 12 lines
package/udisks/Config.in +2 -1
index 04a632dd8d..909b3c8bd4 100644
@@ -4,21 +4,27 @@ config BR2_PACKAGE_UDISKS
 	depends on BR2_HOST_GCC_AT_LEAST_4_9 # spidermonkey
 	depends on BR2_INSTALL_LIBSTDCPP # spidermonkey
 	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS # gobject-introspection
 	depends on BR2_PACKAGE_SPIDERMONKEY_ARCH_SUPPORTS # spidermonkey
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # spidermonkey
+	depends on BR2_SYSTEM_ENABLE_NLS # volume_key

There is no such dependency in volume_key.

package/udisks/Config.in config BR2_PACKAGE_UDISKS · line 16

Quoted 8 lines
package/udisks/Config.in +3 -1
+	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # spidermonkey, gobject-introspection
 	depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # polkit
-	depends on BR2_USE_MMU # lvm2
+	depends on BR2_USE_MMU # lvm2, gobject-introspection
 	depends on BR2_USE_WCHAR # dbus-glib -> glib2
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC # polkit, lvm2, parted
 	depends on !BR2_STATIC_LIBS # lvm2, spidermonkey
+	depends on BR2_TOOLCHAIN_USES_GLIBC

Why is this dependency on glibc needed? Coming from GOI ? Also, it makes the !BR2_TOOLCHAIN_USES_UCLIBC dependency no longer needed.

In addition, you did not propagate all the dependencies of volume_key I believe (such as SYNC_4). Could you check this ?

Quoted 5 lines
package/udisks/Config.in +0 -3
 	select BR2_PACKAGE_DBUS
 	select BR2_PACKAGE_DBUS_GLIB
-	select BR2_PACKAGE_SG3_UTILS
-	select BR2_PACKAGE_POLKIT
-	select BR2_PACKAGE_PARTED

package/udisks/Config.in config BR2_PACKAGE_UDISKS · line 27

Quoted 10 lines
package/udisks/Config.in +7 -1
-	select BR2_PACKAGE_LVM2
+	select BR2_PACKAGE_GOBJECT_INTROSPECTION
 	select BR2_PACKAGE_LIBATASMART
+	select BR2_PACKAGE_LIBBLOCKDEV
 	select BR2_PACKAGE_LIBGUDEV
+	select BR2_PACKAGE_LVM2
+	select BR2_PACKAGE_PARTED
+	select BR2_PACKAGE_POLKIT
+	select BR2_PACKAGE_SG3_UTILS
+	select BR2_PACKAGE_LIBXSLT

Alphabetic ordering would be nice.

package/udisks/Config.in if BR2_PACKAGE_UDISKS · line 56

Quoted 3 lines
package/udisks/Config.in +2 -1
-comment "udisks needs a glibc or musl toolchain with locale, C++, wchar, dynamic library, NPTL, gcc >= 4.9"
+comment "udisks support needs NLS enabled"
+	depends on !BR2_SYSTEM_ENABLE_NLS

As said above, I don't think that it is true.

package/udisks/Config.in if BR2_PACKAGE_UDISKS · line 66

Quoted 10 lines
package/udisks/Config.in +4 -1
+comment "udisks needs a glibc toolchain with locale, C++, wchar, dynamic library, NPTL, gcc >= 4.9"
 	depends on BR2_USE_MMU
 	depends on BR2_PACKAGE_SPIDERMONKEY_ARCH_SUPPORTS
-	depends on !BR2_ENABLE_LOCALE || BR2_TOOLCHAIN_USES_UCLIBC || \
+	depends on BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS
+	depends on !BR2_ENABLE_LOCALE || \
+		!BR2_TOOLCHAIN_USES_GLIBC || \
 		!BR2_INSTALL_LIBSTDCPP || \
 		BR2_STATIC_LIBS || \
 		!BR2_TOOLCHAIN_HAS_THREADS_NPTL || \

Of course, this will have to be updated.

Overall, it is really crazy. A stupid daemon that manages storage devices need a Javascript interpreter and GOI.

There was some discussion at
https://github.com/storaged-project/udisks/issues/615 about running udisks without polkit.

Or maybe we need to package https://wiki.gentoo.org/wiki/Udevil as an alternative, but it's not maintained since 2015, so not great at all. See https://github.com/IgnorantGuru/udevil/commits/master.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com